RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Responsible to lead project in ship automation related equipment design, platform equipment integration and its interface with the Ship Management System (SMS), and to platform system equipment related control and monitoring logic, which includes basic and detail design :

o SMS architecture

o Generate I/O list

o Integration of third party equipment / system with SMS

o Control console design and control panel arrangement

o Control room arrangement layout

o Platform system automation design, system control and monitoring

• Responsible for function requirement design, safety and surveillance related systems, such as:

o Propulsion control system (PCS), Power management System (PMS) function specification

o Dynamic positioning system

o CCTV system, Fire Detection System

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electronics and Automation systems

• Knowledge in computer networking, control instrumentation and control system design

• Knowledge of standard communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NEMA, CANbus, J1939

• Knowledge in Autocad, Naviswork, AVEVA Marine 3D software

Requirements:

• Degree in Electrical, Automation, Mechatronic or any related engineering field

• Has 6 years working experience in Automation or Marine/offshore Industry

• Good Interpersonal Skills, problem solving skills and is a team player.

• Good time management and able to meet tight deadlines

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

The School of Mechanical & Aerospace Engineering (MAE) is a robust, dynamic and multi-disciplinary international research community comprising of world-class scientists and bright students. MAE prides itself in its excellent research capabilities in areas including advanced manufacturing, aerospace, biomedical, energy, industrial engineering, maritime engineering, robotics, etc. The school is equipped with state-of-the-art research infrastructure, housing a comprehensive range of cluster laboratories, test bedding facilities, research centres/institutes and corporate laboratories. Cutting-edge research in MAE addresses the immediate needs of our industries and supports the nation’s long-term development strategies. In the new era of industrial 4.0 and sustainable living, MAE is rigorous in developing new competencies to support the growth and competitiveness of our engineering sector in the global landscape. MAE has grown to be leader in Engineering Research, ranking amongst the top engineering schools in the world.

For more details, please view https://www.ntu.edu.sg/mae/research.

The School of Mechanical and Aerospace Engineering is seeking to hire a Research Fellow to develop novel AI-enhanced design methods for heat exchanger for energy saving purpose. The candidate will work on multi-physics numerical simulations, machine learning and manufacturability constrained design optimization. We expect the candidate to deliver optimized designs with improved thermal exchange efficiency and satisfying the additive manufacturing process requirements.

Key Responsibilities:

The Research Fellow will work on a cross-disciplinary project at the intersection of fluid mechanics, numerical simulation, design optimization and machine learning. The key responsibilities of this position include:

• Perform numerical simulation to solve heat transfer problems
• Develop machine learning-based surrogate models
• Perform design optimization based on AI
• Incorporate manufacturability concerns
• Collaborate with internal and external stakeholder on energy systems
• Maintenance of lab or equipment or supplies that include procurement and liaison with suppliers
• Assist or produce high quality reports and documents that consolidate research findings
• Mentoring PhD and thesis-based master students
• Assist in grant writings

Job Requirements:

Required educational qualification, experience, skills and competencies for this position:

• PhD in Mechanical Engineering, Structural Engineering, Civil Engineering, Industrial Engineering, Machine Learning, or related fields
• Expertise in numerical simulation of multi-physics systems
• Expertise in data-driven and machine learning research
• Proficiency in basics of programming languages such as C++, Python, and/or Matlab
• Strong understanding of research methodologies, data analysis, and statistical techniques
• Ability to work both independently and collaboratively within a team
• Effective written and verbal communication skills, with the ability to convey information, collaborate and build relationship
• Ability to produce technical content for publications and deliver informative presentations to diverse audience including students
• Strong analytical and problem-solving skills to analyse and interpret research data
• Attention to details and a commitment to upholding ethical standards in all research activities
• Passion in the field of research and a desire to contribute to meaningful projects
• Proficiency in English speaking and writing for research work
• Publication track record is an advantage for this position

We regret to inform that only shortlisted candidates will be notified.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

To handle & manage the coordination of all Southeast Asia store planning projects.  Assist the management in the search of project negotiation with relevant landlords, vendors and partners.  Oversee the construction and completion of each location to ensure standards of quality are met in a timely and cost-effective manner while keeping AP Standards.

Responsibilities:

Project-based Architectural Design Consultancy Services:

• Conceptualize concept and schematic designs.
• Carry out feasibility studies and presents design proposals.
• Design development that would include detailed drawings and specifications for contractors to follow for construction purposes.
• Assist in tendering and bidding processes and inspect the on-going construction to ensure that the project is built according to design plans.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the building plans meet the necessary building standards.
• Project and/or design management of more than 3 - 4 projects at any given time.

Research-related Work:

• Assist in carrying out practice-based research into specific issues and challenges surrounding the built environment, with the aim of gaining greater insight into these issues and developing design strategies and solutions in response to them.
• Work with Director (Design and Research) to enhance public/industry awareness of the firm’s design philosophies, capabilities, and accomplishments (directly and indirectly) through design, writing, teaching, and research work.

Requirements:

• Minimum Bachelor Degree in Architecture or equivalent
• At least 5 years of working experience in the related field
• Able to work well with a team and take the lead at the working level
• Able to guide younger staff in design matters
• Possess good design and graphic communication skills, especially in the concept design, schematic design and design development stages.
• Positive attitude
• Some experience with tender documentation and construction stages
• Software skills: Rhino, Grasshopper, Adobe Photoshop, Illustrator and Indesign. Revit and computational skills will be a plus.
• Willing to take on new challenges

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

1) RESPONSIBILITIES

- Act as the primary point of contact for DC Consultants and selected DC Key Accounts, collaborating internally to champion customers’ needs and drive outcomes.

- Create mapping for individual DC Consultant and regularly track progress.

- Actively promote Hoppecke DC solutions to increase market awareness and acceptance.

- Position Hoppecke’s DC solutions as primary offerings in DC Consultants & customers’ designs.

- Expectation to specify on design level (pre-tender).

- Provide prompt technical support to DC consultants or customers during the project process.

- Liaising with product/technical/back-office teams from factories, regional technical team.

- Work closely with the Sales Team on deal capture.

- Feedback on competitions solutions updates in the market.

- Regularly update activities via CRM platform (Sales force) to track opportunities pipeline.

Job descriptions :

• Work on SoC/Subsystem define and integration.
• Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
• Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
• Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
• Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
• Post silicon Debug and support.

Job requirements:

• Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.
• Experience with ASIC design flow
• Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification
• Experience in video processing and video analytics is a plus
• Experience in USB/SDMMC/DDR IP is a plus.
• Experience in Functional Safety, automotive certification is a plus.
• Passionate and strong in general programming is a plus
• Good understanding of DFT
• Familiar with UNIX/ Linux environment and scripting
• Good communication and interpersonal skills
• Strong analytical and problem-solving skills
• Professional working with bilinguals in Mandarin is a plus

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Mentor a team of engineers in Basic design to carry out Hull form and General arrangement development, Hydrodynamic and stability calculations for a tender or ongoing projects.
• Assist in the development of new products.
• Support other in-house departments and external parties, where required, by providing specialist technical advice and information.
• To generate list of drawing/document specific to each project.
• Prepare technical specifications for equipment procurement (e.g. major deck equipment) and perform technical evaluation of vendor’s bid.
• Carry out naval architectural calculations, hydro dynamic analysis, stability calculations.
• Prepare and review layout arrangement in accordance with building specification, rules, and regulations (fire, watertight integrity, accommodation layouts…)
• Manage and check technical information of external suppliers of equipment and systems and coordinate/cooperate with engineers from other trades in the organization.
• To check and approve calculation/drawings and material list and ensure that they conform to contractual technical specifications, installation control documents, Classification and Statutory Rules/Regulations.
• Participate in tests and trials, where required.
• Liaise with ship owners and surveyors.
• Ensure that all design issues raised by owner, Class and Flag on drawings and documents are timely and properly captured in Action Item Register for follow-up actions.
• Keep abreast with current technological developments and products.
• Keep abreast with Classifications Rules, military and industrial standards relevant to design activities.

Requirements:

• Degree in Naval Architecture/ Marine Engineering or Structural Engineering from a recognized University
• Strong knowledge of international design codes, Classification/Statutory Rules, and Regulations.
• Possess Engineering Design and Project Management skills
• Strong Leadership and Interpersonal skills to manage assigned team members and other stakeholders
• Strong experience in Naval architecture, Structure, Outfitting, Accommodation design
• Proficiency in AutoCAD, Aveva Marine, NAPA, Microsoft office, Rhino 3D, CFD software knowledge
• High proficiency in 3D modeling skills using 3D CAD software will be an advantage.
• At least 10 years’ experience in engineering design in Marine/Offshore/Oil & Gas industry or Classifications Societies

Other Information:

• Location: 16 Benoi Road(Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,