We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master's in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Mechanical Design Engineer

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Collaborate with team of engineers to understand customer requirements and translate into design
• Develop or convert mechanical design concept to 3D model and 2D drawing by utilizing CAD software
• Produce design justification with DFMEA, calculation and analysis
• Provide schedule planning for design, build and testing.
• Collaborate and follow-up with other function groups such as procurement, manufacturing, and quality to deliver final product
• Provide costing analysis for cost reduction opportunity with alternative design proposal
• Prepare and present design proposal to internal or external party
• Participate in test and troubleshooting to validate design intent and function
• Generate BOM, RFQ, ECR/ECN

RELATED EXPERIENCE AND EDUCATIONAL REQUIREMENTS

Minimum requirements

• Diploma or degree holder, preferably with 3 years relevant experience in semiconductor equipment design
• Hands-on experience in CAD software such as SolidWorks
• Good in drafting 2D drawing detailing and familiar with GD&T
• Familiar with pneumatic and piping industry application components
• Familiar with fabrication process such as machining, turning etc.
• Good knowledge in heat transfer and fluid dynamics
• Familiar with tolerance stack-up analysis

`

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Job Description & Requirements

1) Modelling and form finding of tensile membrane structure

2) Engineering Analysis Using Windas Work Station

3) Preparation of engineering report

4) CFD Simulation (Wind, Rain, Thermal Confort)

5) Project management, liase with clients, architects and factory

6) Bill of quantity preparation

7) Software Development

Job Description

· To create concepts for mechatronic systems (sub assemblies, assemblies) according to the required specification

· To design “Product Related” parts and pick-up tools

· To do feasibility studies, to provide effort and product cost estimation and risk indication to fulfill the specification

· Abide design to cost principles in any aspects

· Create 3D modules and BOM´s incl. 2D drawings following the BESI standards.

· Mind safety and international machine product standards.

· Initiate engineering change request and implement design changes.

· Project coordination and time management for responsible topics

· Work closely with other disciplines to meet project objectives; especially for CSR (customer specific requests) together with product marketing (PM).

· To write and present technical reports to internal and end customers to communicate design related issues and countermeasures when necessary.

To support technical inquiries from operations and the Technical Support

Requirements :

Education

Degree of mechanical / mechatronics engineering

Work experience

· Minimum 3-5 years or equivalent of relevant experience in automation / equipment industries

· Significant practical experience in mechanical design, construction and testing with a solid understanding of functional relationship of individual components and electromechanical systems.

· Good knowledge of mechanical parts evaluation and qualification

· Knowledge of structural dynamics/modal analysis is a plus

Expertise and methodology

· Strong analytical problem- solving skills and proficiency in CAD software and finite element tools such as Creo, Solid Edge, Mechanica / Ansys, etc.

· Working experience with equipment architecture design and system integration

Other requirement criteria

· Good communication skills

· Good English skills (verbal and written)

· Passion for continuous improvement

· Self starter, self organized

· Customer and service oriented

· Result oriented

· Team player

· Stress resistant

· Position: Project Executive

· Location: Sims Close

· Working Hours: Monday to Friday (9.30am - 6.30pm)

· Salary (commensurate with experience): Up to $3,500 + Performance Bonus

· Duration: Permanent

· Industry: Design Agency

Main Responsibilities:

· Maintaining and monitoring project plans, project schedules, work hours, budgets and expenditures

· Ensuring project deadlines are met

· Determining project changes and undertaking project tasks as required

· Developing project strategies

· Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project

· Assess project risks and issues and provide solutions where applicable

Requirements:

· Bilingual in English and Mandarin to converse with Mandarin speaking associates

· At least 1 year of relevant work experience

· Competency in Microsoft applications including Word, Excel, and Outlook.

· Ability to work on tight deadlines

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Responsibilities:

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming
• Manage talents and crew both in Studio and location filming and see to crowd control
• Prepare production reports
• Ensure there is continuity of costumes and props during production
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing

Job Requirements:

• Diploma and Degree graduates with no experience or candidates with 2 years of related experience are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

Flexible electronics lab at NUS MSE is looking for a Research Assistant to work on a soft robotics project. This position requires following responsibilities;
- Design, fabrication and characterization of soft robotic devices.
- Working on experimental setup of actuator preparation, fabrication and characterization.
- Working closely with PI and lab members.

Qualifications

• Bachelor’s degree
• Experience on Control
• Experience on Robotics
• Experience on Design
• Individual and team work ability
• Good writing and communications skills
• Risk management and problem-solving ability

Job Description & Requirements

· Teach and conduct math classes and programs

· Develop and curate curriculum resources

· Oversee and train students in preparation for math competitions

· Facilitate an inclusive and collaborative classroom environment for math education

· Encourage students to express their creativity and problem-solving skills through mathematical projects

· Provide quality feedback on students' mathematical skills and development progress

· Participate in campus events, including parent meetings and festive occasions

· Perform any other duties and responsibilities as assigned by the Teaching Supervisor

Job Specification:

· Diploma / Bachelor’s Degree in Mathematics, Education or related fields

· Experience in teaching or tutoring, especially with children and young adults, is advantageous

· Patient, approachable, and passionate about teaching mathematics to kids and young adults

· Ability to connect, interact, and establish positive relationships with parents

· Demonstrates professionalism in appearance, dressing, and communication skills

· Energetic, with a positive can-do attitude

· Strong team player

· Fresh graduates are welcome to apply; training will be provided for candidates with a strong interest in education.

Provide part-time 3D and 2D drawing services for our interior design projects, focusing on retail and residential spaces. Tasks include developing 3D renderings of architectural and interior designs and creating detailed drawings for construction and renovation projects.

Requirements:

• Certificate or Diploma in Interior Design or related field
• Proficiency in 2D and/or 3D drafting software
• Ability to work independently and meet deadlines
• Excellent communication skills and ability to collaborate effectively with team members

Join Artistori as we seek enthusiastic and dedicated educators specializing in fine art and visual arts. If you're passionate about nurturing creativity in children and enjoy guiding them through various artistic expressions, we invite you to be part of our team. Embrace the transformative power of arts education in fostering individual growth, from essential life skills to academic success. If you share our commitment to shaping young minds through art, we welcome you aboard!

We're seeking experienced art educators who:

1. Are proficient in and adaptable to inquiry-based pedagogy approaches.
2. Excel in generating curriculum ideas and crafting effective curriculums.
3. Have experience teaching a diverse range of ages, from 2 years old to adults.
4. Value parent involvement and believe in keeping parents informed about their child's activities, objectives, and performance.
5. Emphasize engagement and interest as catalysts for children's development and learning.
6. Foster a fun, engaging, and enthusiastic class atmosphere to promote learning.
7. Embrace multiple roles to effectively communicate, learn, discover, and collaborate with students.
8. Recognize the power of the arts in conveying children's interests, expressions, imaginations, and ideas, and can teach children to articulate them through artistic language.

Requisites:

• Strong communication and presentation skills.
• Excellent classroom, time, and student management abilities.
• Demonstrated initiative and a positive attitude towards nurturing teaching and learning.
• Proficiency in artistic knowledge and fine art techniques.

Qualifications

• Professional qualification in art, art education, visual arts, or fine arts.
• Early childhood certification is advantageous.
• Experience and skill in pottery and ceramics are valued.
• Proficiency in digital platforms is a plus.

Drop an email to us with your CV / Resume: [email protected]

Whatsapp: 88765551

WeChat: Artistori

Website: http://www.artistori.com

Facebook: http://www.facebook.com/artistori

Instagram: https://www.instagram.com/artistori_school

小红书: Artistori

意言社 Artistori

用艺术表达语言，让语言丰富艺术

Your Story, Your Art

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Cognita Schools are committed to safeguarding and promoting the welfare of children and young people and expects all staff, volunteers and other third parties to share this commitment. Safer recruitment practice and pre-employment background checks will be undertaken before any appointment is confirmed.

An exciting opportunity for a Secondary Art Teacher has opened in AIS. If you are someone who is driven in making a positive difference and with passion for growth and development, this role is meant for you!

Position Requirements:

• IBDP/IGCSE and/or HSC experience preferred, but not essential
• Experience in an International School environment would be a distinct advantage
• Excellent communication skills, multi-tasking and time management
• Ability to work as a part of a team and an interest in participating in the wider school community

Qualifications:

• A minimum four year recognised teaching qualification including a Bachelor’s Degree and Postgraduate Teaching Diploma/University Qualification or a Bachelor of Education
• A minimum of 3 years Full Time teaching experience in a recognised educational institution ideal, however graduates may be considered

Further information about this position is available in the job description found in the AIS website at https://www.ais.com.sg/work-for-us-positions-vacant/

Applicants are required to read the job description for the role prior to applying and submit a cover letter, curriculum vitae and a duly completed copy of the School's Job Application Form (downloadable from the school's website) to the email address: [email protected] by 19 May 2024. Kindly ensure that the position title is clearly specified in the job application form.

Only applications submitted using the school's job application form will be considered.

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Job Requirement:

• Degree in Engineering/Architecture or its equivalent.
• Minimum 5 years of relevant experience.
• Technical design capabilities
• Proficient in MS Project and MS Office (Knowledge of Primavera is an advantage)

Responsibilities:

• Preparation and writeup for technical submission
• Compilation of technical documentations
• Sourcing and Discussion with specialists/subcons
• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

Responsibilities:

• Conduct Solution Architecture activities when required on Bids and Projects, in close collaboration with Systems Engineers and reporting to the PDA in that case. In charge of proposing Solution Compliance.
• Support the Solution Orientation Review (SOR) for Bids in collaboration with the Solution Engineering Manager (Bids), Services Engineering and assigned bid team members.
• Propose draft DVa and report to the PDA in terms of Solution definition for allocated Bids/Projects.
• Ensure that the design of the Solution satisfies:
  • Customer needs and contractual requirements for a project,
  • Contractually applicable technical standards,
  • Alignment with the Product Policy,
  • Cost effectiveness, and
  • Applicable design legislation, rules and regulations.
• Ensures, with the support of Specialty Engineering experts & HSE stakeholders that:
  • Solution design takes into account contract requirements in terms of Safety, Security and Human Factors and applicable legislation, rules & regulations, including Environmental/HSE requirements & standards,
  • Related certification activities are performed correctly.
• Particular focus on risks qualification and quantification and mitigation actions at Bid phase and follow-up at Project phase. Risks must be understood and mastered.
• Participate in specific actions plans and dedicated task forces as allocated to solve complex technical problems.
• Contribute to elaborate the TopSKY-ATC product policy through commonalising specific Solutions required by projects and support the HE Product Design Authority in maintaining a rigorous Product policy.
• Take charge of a Technical Speciality when required (e.g. Network & Infrastructure) with the aim to:
  • be the subject-matter expert within the organization,
  • provides a conduit for the sharing of state-of-the-art knowledge across the discipline,
  • be responsible for capitalisation within his/her discipline.
• Pro-actively share knowledge with the experts network inside the AMS Business Line and participate when required into external events in the technical & ATM expert fields to represent Thales AMS.

Requirement:

• Tertiary Qualifications in Engineering
• Degree in computer sciences (minimum Bachelor of Sciences) and network discipline
• 7 years minimum of experience holding positions in systems engineering and/or software engineering and/or integration on complex software-centric real-time systems.
• A proven track-record in supporting the design of Solutions for complex System Of Systems.
• Proven capability to work in a multi-cultural environment and with variety of international customers.
• Experience in the ATM Domain is mandatory.
• Language: fluent English, French would be a plus.
• International work context
• Aptitude to work effectively as part of a team.
• Resilience under pressure.
• Capacity to learn quickly.
• Capability to manage various stakeholders having different objectives.

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Tanglin Mission

Tanglin Trust School Singapore has a long tradition of providing British-based learning with an international perspective. At Tanglin we strive to make every individual feel valued, happy and successful. Responsibility, enthusiasm and participation are actively encouraged and integrity is prized. Working together in a safe, caring yet stimulating environment, we set high expectations whilst offering strong support, resulting in a community of lifelong learners who can contribute with confidence to our world.

Our Vision

We aspire to be the best school in the world with a dynamic learning community which nurtures and inspires every individual to be the best they can be. Our core values of Respect, Responsibility and Purpose are at the heart of everything we do across the school.

The Role

This is a rare and exciting opportunity to join a DT department within a well-established, outstanding school. Our vision is that the department will be modern and forward-thinking, with learning located in authentic contexts, and that the curriculum will reflect the successful candidate’s creative energy. He/she will have outstanding subject knowledge, a passion for designing and will be at the cutting edge of technological innovation within the field. The successful candidate will be a teacher with commitment, integrity and excellent communication skills and a teacher with flexibility, resilience and a caring approach towards students.

Key Responsibilities

1. Learning & Teaching

• Manage an effective, enthusiastic, and safe learning environment.
• Deliver the curriculum to assigned classes in accordance with the timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies that develop the competence and confidence of every student.
• Seek to develop students’ attributes through the Tanglin Learner Profile, as well as seek opportunities to develop their own attributes through that framework.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Create opportunities for students to develop confidence in the subject through carefully planned and managed activities.
• Support a departmental and whole school culture of innovation that includes varied and exciting teaching approaches, technological integration, and thoughtful evaluation.
• Possess the flexibility required to teach a range of materials, topics, and ability levels.
• Possess the flexibility required to teach either pathway (A level or IB) in the Sixth form.

2. Planning & Development

• Take responsibility for at least one aspect of D&T curriculum development each year following discussion and negotiation with the department leadership team (eg, creating a new scheme of work, drafting of departmental policy, organisation of trip).
• Assist the D&T department leadership team in evaluating and developing the new curriculum.
• Take advantage of opportunities for professional development offered by Tanglin.
• Take responsibility for their professional development and that of colleagues by occasionally leading departmental inset or department meetings in an area of expertise.
• Assist the HOD (Head of Department) in identifying areas for development in D&T within the broader aims of the school development plan.
• Collaborate with colleagues in the planning and delivery of schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject and of different pupils.
• Assist the HOD in adapting curriculum content and methods of teaching and examining as appropriate.
• Support a school culture of innovation that includes technological integration.
• Be supportive of and open to the frequent change that characterises a school such as Tanglin.

3. Management of Resources and the Teaching Environment:

• Assist the HOD in identifying appropriate resources within the limits of the departmental budget.
• Assist the HOD in ensuring that departmental rooms present stimulating environments that help to influence pupils’ attitudes positively towards D&T.

4. Assessment, Recording & Reporting

• Ensure students’ work is regularly assessed according to D&T departmental policy and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy as laid down in the Staff Handbook.
• To use information gained from assessment, recording and reporting procedures to generate further improvement in pupil achievement.
• Assist the HOD in the setting and marking of school examinations and to supervise entries for external examinations.

5. Pastoral and Co-Curricular

• Lead the development of the F1 in Schools program in D&T.
• Contribute to co-curricular activities that broaden pupils’ experiences and contribute to the general life of the school.
• When required, take on a form tutor role in the Senior School and fulfil the responsibilities of that position.
• Follow the School’s policies and procedures regarding discipline and behaviour, daily routines, duties, homework, leave of absence, and visits, as laid down in the Staff Handbook.
• Be responsible for reporting any concerns about a child to the Designated Safeguarding Lead.

6. Communication and Liaison

• Help to establish an ability to spot and solve problems and to increase resilience in learning, through your own enthusiasm for the subject.
• Contribute wholeheartedly to D&T department activities such as supporting each school with projects, planning ‘House Day’ activities, ‘Children’s University’ and transition days.
• Attend and contribute to meetings of a professional nature with HOD, HOF, HOY, SSLT and in other circumstances when requested.
• Liaise with the HOD and HOF in respect of pupil records, rewards, and sanctions.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Learning Support Team regarding individual students who may have exceptional needs, to ensure that those needs are understood, planned for and met.
• Liaise with pastoral staff, including form tutors, Heads of Year, the Assistant Heads of School and the Head of Careers on matters pertaining to the study of D&T.
• Contribute to the strengthening of the parent-teacher partnership in individual and whole school initiatives as and when required.
• Assist the HOD in developing effective links with the wider community to extend the study of D&T and enhance teaching and learning.

Job Description:

We are looking for a highly motivated computational scientist with a deep understanding of chemistry/cheminformatics and structural biology to develop new AI models for ligand discovery. You will be working on a large collaborative project to build up A*STAR’s computational drug discovery capabilities. The candidate is expected to be familiar with the latest generative models. Familiarity with molecular docking programs is a plus.

Job Requirements:

• PhD degree in life sciences, chemistry, computational biology, or a related discipline
• Passion for science and research
• Highly motivated
• Proficiency in the use of machine learning frameworks (e.g. PyTorch, TensorFlow)
• Experienced in developing generative models
• Strong knowledge of chemistry/cheminformatics and structural biology
• Able to work independently and as part of a team
• Excellent written and oral communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Requirements :

1) A Degree in Civil or Structural Engineering from a recognized university or its equivalent recognized by the Professional Engineer Board, Singapore. A diploma holder with design experience will also be considered.

2) Minimum 2 years of design experience in Building projects and/or Earth Retaining Structures.

3) Conversant with local codes and authority submission procedures.

4) Competent in common engineering design software, analytical tools and BIM software.

5) Familiar with precast concrete, post-tensioned concrete and steelwork design, knowledge of MET design will be an advantage.

6) Proactive, responsible and keen to work in a team.

7) Excellent interpersonal, good verbal and written communication skills.

Job Description :

1) Perform Civil/Structural engineering design and analysis.

2) Participate in the BIM process. Involvement in the collaboration with peers and fellow Consultants from other disciplines.

3) Coordinate, monitor and track authority submissions for Projects.

4) Conduct feasibility studies, and inspections and prepare technical reports.

5) Attend meetings and design workshops, when necessary.

6) Liaise with Engineers and/or Consultant teams during the implementation of projects.