Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

· Work with a wide range of media daily, including wording creation, photography, video editing and etc.

· Update and maintain company website.

· Utilize various digital publishing platforms to create structured drafts.

· Liaise with sales designer/supplier/customer. (E.g.: for update/information needed.)

· Research on industry-related update and focus on trending topics.

· Analyze web function or volume to measure the success of content created. Prepare the necessary update to identify the result(s) and reporting to Director.

· Perform and complete jobs assigned as required by Marketing Manager/Director. (including Ad-hoc duties)

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Arts/Design/Marketing/Business or any related fields.
• Minimum 1 year experience in graphic designing.
• Proficient in English.
• Good sense of aesthetics.
• Preferably with web design knowledge.
• Passionate about social media and producing creative content.
• A team player who is also able to work independently.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

Job Description:

• Design of subsystem electronics according to top-level requirements, analogue, digital and mixed signal circuit design, simulation, schematics capture and PCB layout
• Hands-on prototyping of PCBA, circuit debugging/troubleshooting
• Design verification and planning of test criteria, test protocols and documentation of design specifications
• Anticipate the design risk and implement design risk control measures
• Assist in development and testing of firmware drivers for various subsystem modules and such as sensors and actuators (e.g. I2C temperature sensor, accelerometer, vacuum pump, solenoid valve, etc.)
• Work in conjunction with firmware development team for firmware optimization and firmware/hardware bug resolution
• Manage verification and validation activities of electronics hardware including the performance, reliability and regulatory compliance such as EMC and product safety. Implement design changes to resolve failures in a timely manner
• Actively collaborate with cross functional team members throughout the product lifecycle
• Collaborate/liaise with 3rd party contract manufacturers to oversee the PCBA production, ICT/FCT testing and validation

Qualifications/Experience:

• Bachelors/Master’s degree in Electrical/Electronic Engineering
• 3 years of work experience in product development industry. Fresh graduates with good grades can be considered for junior level position.
• Strong theoretical and practical knowledge of analogue and digital circuits, operational amplifiers, MOSFET transistors and precision circuit design. Familiarity with designs involving optoelectronics such as laser diodes, photodiodes is a plus.
• Experience in schematics capture, multilayer PCB layout design using ECAD tools. Altium Designer experience is strongly preferred
• Familiarity with C/C++ programming language is a huge advantage
• Familiar with standard digital communication interfaces such as SPI/I2C/RS232/RS422/USB etc.
• Exposure to medical device development & ISO 13485 quality management system is a plus
• Full exposure to product development life cycle from proof of concept to DFM with proper documentation is a plus
• Excellent communication skills
• Able to work independently with minimum supervision and a strong team player

Overview

MOSFET IGBT engineer/ technical expert (design, manufacture)

There are multiple component development bases in China, and you are required to assist and support the R&D team in China to carry out development work after joining the company.

Description

1. Design/ Development

Use simulation software and layout software to design the structure of the corresponding product, and design the composition of the manufacturing process.

2. Manufacture

Conduct DOE design, identify manufacturing process, and conduct quality evaluation. Cooperate with chip factories to develop, and conduct new product verification such as testing finished products and verification.

3. Quality evaluation

Analyze and organize test data, and apply the technology under research and development to new product development and intellectual property rights.

4、Others

Provide technical support for the company, but also need to assist in various identification and management work.

Experience & abilities required

・Relevant development experience in 6-inch and 8-inch Shield Gate Trench MOSFET, Super-Junction MOSFET IGBT

・3+ years of experience in semiconductor design or manufacturing

・Can use English as working language

・Good logical thinking and communication skills, work hard and have a sense of responsibility for work

・Experience in using simulation software and layout software is preferred

・Experience in IGBT MOS product development, or work experience in semiconductor companies is preferred

Introduction

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

In collaboration with the National University of Singapore (NUS), the Nanyang Technological University (NTU) and University of Illinois Urbana-Champaign (UIUC), SEC is undertaking a research programme on "Future Resilient Systems" (FRS). The FRS programme addresses the challenges with critical infrastructure systems that provide essential services to modern societies, which is of particular importance to innovation-driven economies like Singapore and Switzerland. Within this framework we are announcing the following job opening.

Task/Job description

• This position is under the FRS programme. The researcher will maintain and further develop InfraRisk, an integrated platform for the electricity grid, water network and transport system quantifying the effects of weather-related disruptive events on interdependent systems.
• The platform will be leveraged to design system resilience against disruptive events and across system interdependencies, with a focus on simulating and testing disruption/restoration scenarios relevant to Southeast Asia.
• An important technical aspect will be to model the recovery strategies considering interdependencies between the power, water, and transport systems.
• The ultimate goal of the integrated platform will be to identify features and requirements that aid in developing solutions to improve resilience.

Requirements

• The successful applicant must hold either a Master’s degree with a minimum of 1 year of working experience or a PhD/equivalent University level diploma in electrical, industrial & operational research, civil, mechanical, control engineering, or a related field.
• Principal qualifications include strong programming experience (preferably MATLAB or Python), analytical and quantitative skills and experience with robust optimization.
• She/he should be further experienced in resilience analysis, and in modelling power, water and/or transport systems.
• A solid knowledge of written and spoken English is mandatory, as this is the language for communication at work.
• We are looking for highly motivated and self-driven candidates, with good interpersonal skills and the ability to thrive in a diverse, multidisciplinary environment.
• Please note that salary will commensurate with qualifications and experience.

Information about the application process and contact for applicants

We look forward to receiving your online application including the following documents:

• A letter of motivation
• A CV
• Electronic copies of your educational certificates, and
• Contact details for at least 2 referees.

Applications via email or postal services will not be considered.

For further information about the Future Resilient Systems programme, please visit our website: https://frs.ethz.ch/. Questions regarding the position should be directed to Prof. Giovanni Sansavini by email to [email protected] (no applications).

Duration: 10 months to 1-year contract.

Work location: 1 Create Way, CREATE Tower, Singapore 138602 (NUS University Town)

The Singapore-ETH-Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a PhD in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

On behalf of our client who is an Original Equipment Manufacturer (OEM) in the Building Equipment space, we are looking for Mechanical Design Engineers.

Responsibilities

• Provides technical support to projects, Installation on problem verification, report, and coordinates with Group on job site issues and technical solutions related to mechanical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager

Requirements

• Degree in Mechanical Engineering or diploma with a minimum of 5 years of related experience.
• Proficient in Auto CAD & 3D software is essential

Salary will be offered in accordance with experience and qualification.

Location: East

EA License No. : 22C0971 | EA Reg ID : R21101298

Responsibilities:

• Improve Service Blueprint of retail outlets, identify as well as propose areas for improvements
• Conceptualise concepts and ideas for marketing campaigns on social media and website (Facebook & Instagram)
• Propose social media content, creative photo/ video shoots and schedules
• Produce copywriting, creative photo/video shoot for marketing campaign to boost sales and drive brand awareness
• Propose graphics, animations, gifs or video for marketing collaterals, social media platforms and website
• Competitor analysis and monitoring results of content on social media platforms to identify trends
• Content Creation and Marketing Materials:
• Oversee the creation of compelling marketing content, including product descriptions, videos, and blog posts.
• Develop marketing materials such as brochures, presentations, and promotional materials.

Minimum qualifications:

• Presently enrolled in a full-time Diploma or Bachelor program that is related to either business, marketing or branding
• Proficient in Video, Animation and Graphic editing tools not limited to Adobe Illustrator, Fireworks, InDesign, Premiere Pro and Photoshop is a plus
• Good foundation or high interest in Digital Marketing, Social Marketing, Video editing, Copywriting, Animation and Graphic Editing is a plus
• Be able to complete 6 months of internship with the company
• Ability to speak and write in English and Chinese fluently

Job Description:

• Plan and create content for online channels do not limit to social media, microsite, etc
• Develop pages, posts, and applications to appeal to the target audience
• Conduct in-depth social media research to develop various social media content like graphics, videos, and other forms of content to understand the Management needs
• Obtain input from Management Team to ensure that designs meet organizational standards and brand expectations, express ideas accurately, and represent the company or client appropriately
• Work independently as well as cooperatively with creative team to meet deadlines, stay within budget, and schedule project implementation based on workload, which may include five or more simultaneous projects
• Create a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photoshop
• Develop concepts by hand or with software, and execute original content by determining the ideal usage of color, text, font style, imagery, and layout
• Examine existing processes, identify flaws, and create solutions that improve design capabilities
• Review final layouts and suggesting improvements when necessary
• Stay up-to-date with new design techniques and software
• Any ad-hoc duties as directed

Job Requirements:

• Candidate must possess at least Diploma in Art / Design / Creative Multimedia / Computer Graphics or equivalent
• Minimum 1 years of relevant working experience, preferably with social media design experience
• Solid knowledge of image editing and digital sketching software, ike Photoshop, Indesign and Adobe Illustrator
• Meticulous, ability to multi-task and work within tight timeline
• Possess positive disposition, independent, resourceful and a team player

• Oversee daily salon operations
• Hire and train beauticians, as needed
• Organize employees’ shifts, considering peak times and seasonality
• Order beauty products, like creams and essential oils and replenish stock
• Arrange for regular maintenance services for all equipment
• Apply hygiene practices across all beauty stations
• Ensure all beauty treatments meet high quality standards
• Maintain staff records, including salaries and working schedules
• Achieve growth and hit sales targets by successfully managing the sales team
• Design and implement a strategic business plan that expands company’s customer base and ensure it’s strong presence
• Own recruiting, objectives setting, coaching and performance monitoring of sales representatives
• Build and promote strong, long-lasting customer relationships by partnering with them and understanding their needs
• Present sales, revenue and expenses reports and realistic forecasts to the management team
• Identify emerging markets and market shifts while being fully aware of new products and competition status

Responsibilities

• Produce all required 2D and detailed drawings for submission, approval and endorsement to authority and/or clients.

• Produce quality rendered 3D colour perspectives using AutoCad / Sketch-Up.

• Familiar with PUB drawings will be an advantage.

• Familiar with all the submissions to authority for building construction projects.

• Responsible to match drawings and measurements to actual installation at the project site.

• To attend site meetings and/or conduct site measurements (if necessary).

• Communicate effectively and work closely with consultants, sub-contractors and project team members.

• Involved in coordination and preparation of specifications to liaise with project managers, engineers and other relevant stakeholders for drawings and submission approval.

• Good communication and design skillset to liaise with clients on their needs and requirements.

Requirements And Skills

• Proven work experience as a Designer, Draftsman or similar role

• Required Skill(s): AutoCAD, Sketch-Up, Excel

• Ability to meet deadlines

• Ability to work independently with responsibility.