Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

We are looking for a R&D Engineer as we are setting up our R&D center in Singapore. Applying Engineers MUST be very familiar with cables, connectors and wire harness products. Work experience in cables, connectors or wire harness industry is required. Must have the ability to develop new products. Pro-active, Can-do attitude.

The incumbent will be responsible for the overall project assigned in all design phases (Phase 1 to Phase 4).

The incumbent will need to lead a team of Designers, FF&E designers, Co-ordinators & Draftsman while executing the work in accordance with the contract documents, schedule and budget.

He/she must possess the knowledge, experience and confidence to engage and professionally interact with clients, consultants, vendors and contractors.

He/she must be professional and a personable leader committed to the overall objective and self-development within the company.

Job Description

• Work Closely With Team Of Designers On Producing Design And Looked Into Detailing Which Is In Accordance To The Client’s Requirement,Contract Document And Budget.
• Oversees And Check The Design Produced By The Designers And Draftsman, To Ensure Compliance And Alignment To The Contract Document, Schedule And Budget.
• Assist In Project Co-Ordination Related Matters, Including Scheduling , Manpower Planning and Documentation Submission.
• Update Latest Developments/Information on The Projects With Respective Team Memebers Through Effective Communication.
• Able To Coordinate, Delegate, Give Feedback, And Mentor Subordinates Regarding Their Work And Professional Development Including Problems Solving.
• Review Of Shop Drawings.
• Attends Site Meetings And Site/Factory Inspection.
• Flexibility In Handling Multiple Projects.
• Build Positive Working Relationships With Clients For Repeat Business.

Work Experience & Qualifications

• Degree or Diploma in Architectural or Interior Design or equivalent.
• Minimum 15 years of relevant experience especially in hospitality industry and experience in leading a team of designers , FF&E designers and draftsman.
• Creativity and artistic flair.
• Good understanding of design (composition, planning, materials, details, furniture and fixtures).
• Able to interpret specifications and layouts.
• Good knowledge of drawing preparation and CAD standard, strong organizational skill and attentive to detail.
• Experience in handling projects in all design phases.
• Good knowledge of site work and progress.
• Strong in design detailing and freehand sketching.
• Familiar with hotel design programs, operators design standards and general rules of thumb
• Passionate and aware of global design trends.
• Highly motivated, strong communication, interpersonal, observation skills and team leader
• Responsible and able to work independently.
• Must be meticulous, a good team leader and able to work under pressure to meet tight deadlines and perform in a fast paced environment.
• Knowledge of AutoCAD and MS Office, Adobe Photoshop, 3D Max and sketch up will be a plus.
• Good problem solving skills.

Job purpose:

Assist in the maintenance of accounting principles, practices, and procedures to ensure accurate and timely financial statements

Job description:

• Handle full set of Account (AP/AR/GL) using Odoo.
• Prepare monthly financial Statements, management reports and other reports for fixed Asset, Stocks, Bank, Schedules etc.
• Handle day-to-day accounts activities.
• Handle any ad-assignments assigned by Director and Accountant

Requirement:

• Minimum Diploma in Accountancy
• 2 years’ relevant working experience in preparing full sets of accounts preferred

We are looking for a Design Manager Engineer & Design Engineer as we are setting up our R&D center in Singapore. Applying Engineers MUST be very familiar with cables, connectors and wire harness products. Work experience in cables, connectors or wire harness industry is required. Must have the ability to develop new products. Pro-active, Can-do attitude.

ROLES & RESPONSIBILITIES

• Assist in the planning and implementation of the project from working with Creative, Research, and Development on materials to use, fabrication and installation.
• Take charge to appoint the most appropriate suppliers and contractors that can deliver quality work and best pricing.
• Identify the resource requirements and assign individual responsibilities; ensuring that the project is delivered according to specified standards and within agreed schedule.
• Manage project budget and cost management.
• Be client-facing and be accountable for identifying client requirements and proactively managing client expectations, timelines, and deliverables by keeping communication with client and engaging them with a positive attitude.

REQUIREMENTS

• Minimum Diploma with at least 3 years of relevant experiences.
• Strong presentation and communication skills, as you are the connection between client and team.
• Able to read technical drawings and understand production requirements.
• Ability to manage multiple priorities in a fast-paced, matrixed environment.
• Excellent project management skills.
• Excellent written and verbal communication skills.

• Ability to read and interpret blueprints.
• Assisting supervisors with structural design, planning, layout, and installation.
• Conduct repair work and installation of doors, windows, drywall, cabinets, stairs, and other fixtures as required.
• Ability to assess the quality of woodwork and materials.
• Ability to operate tools, machines, and other equipment.
• Compliance with local building codes, and health and safety regulations.
• Provide excellent customer service.
• Ability to stand for prolonged periods, climb, pull, and lift heavy objects.

Job Descriptions:

• Prepare full set of account.
• Prepare and submission of quarterly Good and Services Tax (GST) to the Inland Revenue Authority of Singapore (IRAS).
• Prepare corporate tax computation and tax return (Form C / C-S).
• Prepare financial statements.
• Able to handle and face clients on the account related matters.

Requirements:

• ACCA Advance Diploma / Degree / ACCA Post Graduate.
• At least 1-year hands on experience in preparing full set of accounts.
• Knowledgeable about Singapore Companies Act, Cap. 50, Singapore Income Tax and GST.
• Positive working attitude and strong desire to learn.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for an Electrical Design Engineer to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

Technical team coordination & management

• Lead & approve the basic and detailed design of all technical aspects of an integrated solution, in line with customer and contract requirements (technical performance)
• Make sure that the project technical team delivers according to the project planning
• Monitor technical costs, make sure that the budget for the technical part is under control
• Coordinate all technical implementation activities done at factories or supplier premises and testing facilities until the project closure

Technical coordination of project stakeholders

• Work in close collaboration with Project Managers & other technical designers and engineers who take care of part of the technical scope
• Identify whether specific expertise support is needed and coordinate the expertise actions if any
• Lead and coordinate all technical aspects of the sub-contracted parts of the project, in strong coordination with the procurement team
• Act as a single point of contact for all project stakeholders regarding the technical content of the project; and ensure technical coordination among the project team

Design & Implementation: according to field of knowledge

• Perform, review some design and specification activities, by leveraging the Schneider Electric portfolio of products & systems in an optimized manner, in order to maximize profitability and limit technical risks; May perform some implementation/test activities (testing, FAT etc.)

Risk & Opportunity Management, Change management, Alert

• Identify any potential changes versus contract or already agreed design
• Work closely with the Project Manager to specify the changes and their implications for Schneider Electric (including cost impact evaluation), until getting a variation order
• Alert the Project Manager of any substantial issue that could affect the project performance or customer satisfaction

Customer interactions

• Lead technical discussions and clarifications with customers
• Act as the key and trusty contact person for all technical topics related to the project

Quality process, Methods, Tools

• Support the Project Manager to ensure full compliance with Schneider Electric processes, and with quality instructions, safety requirements, and governance principles
• Lead the technical team to correct any technical deviations or quality issues occurring during the project execution

Community of practices & Coaching

• Take part in the Technical Leaders' Community of Practice within your Execution Center, or globally within the Technical Excellence Community network
• Identify, get, formalize, share, and promote lessons learned and best practices
• Act as a role model and/or coach junior technical engineers and designers
• Be connected with the Line of Businesses and stay tuned on the last technical evolutions of equipment & systems (in your field of engineering, acting then as a referent in the Community)

What qualifications will make you successful?

• Minimum Bachelor’s Degree in Electrical Engineering
• Min 5 years in leading technical scope of projects in Power System or Electrical Distribution System application
• Working in one or several engineering application domains: Power System, Automation & Software, Telecom & IT, Cyber Security is a plus.
• Technical experience in a specific market segment (e.g., Power GRID & Utility, OGP, MMM, F&B, etc.) or in a customer application/process is a plus
• Ability to lead functional and remote technical teams
• Ability to communicate concisely and synthetically on technical issues/ topics
• Ability to read and understand applicable standards
• Ability to learn from others, share knowledge, coach others, and collaborate efficiently

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

Let us learn about you! Apply today.

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Our Art Directors are visual storytellers. They create visual languages that make hearts skip a beat. They harness the beauty of design to get brands into places no one else can. Their art induces change, inspires action and invokes advocacy. Problem solvers, our Art Directors collaborate with our copywriters, strategists, media planners, technologists and public relations experts to champion unforgettable experiences through-the-line.

Qualifications

· Through-the-line advertising experience

· Strong understanding of digital and social platforms

· Great design skills, including layout, typography, video, design

· Ability to manage multiple projects at one time to meet deadlines

· High level of proficiency in Photoshop and Illustrator

Write in if you like diversity, being involved in advertising and design marketing work for clients and brands in different industries.

We are looking for individuals familiar with interfacing with clients from global FMCG or retail brands, have a structured and methodical approach to business development

with good working knowledge of different marketing and advertising platforms.

Formulate, execute and review strategic plans.

- Must have strong account planning & execution skills

- Excellent communication and negotiation skills

- Generate leads, establish solution proposals, and develop high quality presentations

- Have a strong sense of teamwork and mutual support for fellow employees.

- Must possess strong networks with various levels within potential customer

- Must have an excellent time management.

- Senior professionals with brand clients are preferred

Job Description

• Responsible for management and coordination with planning of works with clients and suppliers
• Manage counter installation of brands counters and maintenance.
• Manage Promotion setup and dismantling
• Counter construction - preparation/brief/quality checks
• Ensure projects are on schedule.
• Provide projects reports - pre-shipment/ defects/ completion, etc.
• Maintain good relationship with project participants -internal and external.
• Liaise and coordinate with all project participants on proper progress updates to ensure a timely delivery.
• Make overseas trips or remote online to meet clients and suppliers.
• Create and update data in office system including PO creation & quotation
• Perform administrative responsibilities within scope of works.
• Able to work under a tight timeline and handle working pressure.
• Able to multi-task and work independently
• Any other duties as assigned by Management from time to time

Requirements

• Possess qualification of N level above
• Proven working experience in Interior design or construction.
• Proficient in Email, Microsoft office and Adobe Acrobat
• Excellent portfolio of previous works.
• Preferably with cosmetics and retail flair experience, and eye for detailing.
• Communication and presentation skills.
• Positive and keen learning aptitude.

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.

We have 7 years of industry experience in creating dream homes and offices for our clients. And now we are expanding our team to better serve our clients. If you enjoy working in a fun, cozy (have a look at our IG) working environment, with a team of members with open communication, look no further! Our team consist of young designers aspiring to further hone their design & skills in hopes of being featured in magazine. And now we need a like-minded Senior Interior Designer to join us!

Job Description / Responsibilities:

• Provide professional design consultation, planning & budgeting costs to prospective clients.
• Prepare project specifications with quotation, including design concept, material selection and space planning.
• Project manage and oversee renovation projects from commencement to handover.
• Prepare site drawings to vendors or subcontractors.

If you are a Senior Interior Designer looking to have a higher comission rate, or intend to progress further in this industry, we are open to discuss more during the interview.

We have 7 years of industry experience in creating dream homes and offices for our clients. And now we are expanding our team to better serve our clients. If you enjoy working in a fun, cozy (have a look at our IG) working environment, with a team of members with open communication, look no further! Our team consist of young designers aspiring to further hone their design & skills in hopes of being featured in magazine. And now we need a like-minded drafter to join us!

Job description / responsibilities:

• Propose interior design ideas for a given project accordingly to client’s requirement. This process may require listening to zoom calls between seniors / management and the client for the purpose of understanding the requirements and for information collection.
• Produce 3D drawings using Coohom accordingly to client’s requirements. This will require you to be physically in the office in order to use and match the correct laminate / materials.
• The due date for each project will be given by the Company’s designers. This includes the first completed rendering and the consecutive revisions thereafter.
• The timeline given shall follow the standard market practice of 1 to 2 weeks for first completed render, 5 to 10 days for revisions.
• Expose and adapt to the role of an interior designer.

Note: Candidates with 1 Year Experience will have added advantage

• Reporting to Senior Marketing Manager and Senior Graphic Designer
• Work closely with the marketing team to develop static motion graphics, animations and videos for a wide variety of marketing collaterals, from compaigns to assets for social media and websites
• Able to conceptualise, develop and execute interesting ideas for marketing projects
• Support Senior Graphic Designer in the design adaptations of any marketing materials online and offline for multiple brands
• Assist in photo shoots and product styling
• Update and manage all digital platforms such as company website, social media accounts to ensure contents are relevant and up to date
• Develop content and visuals for required social media platforms and EDMs
• Source and design company branded merchandises
• Support Marketing Team with ad-hoc projects and events
• Other ad-hoc duties as assigned
• Competent in Adobe Creative Suite (Ai, Ps and Ae)

• Understand the project brief from designers/clients
• Developed designs and concepts based on the client's corporate identity
• Prepare construction, joinery and details drawings
• Prepare specifications for Furniture, Finishes and Equipments
• Technical Drawing (AutoCAD): Space Planning & Construction Drawing

• Track projects status and follow-up with team for the action items
• In-charge of project team timesheets and keep track of billing status
• Assist project manager in coordinating
• Issuing of sales and purchase related documents (invoices)
• Responsible of general administration function
• Provide adminitrative support to the accounting department.
• Daily update in Google Spreadsheet
• Stock taking
• Administrative works about general workers
• Submission for project documents to related parties

• Organising and managing project team, including hiring contractors as needed to complete specifc tasks
• Communicating with clients throughout the project to ensure they are satisfied with progress and updates
• Developing and implementing project timelines, ensuring that dealines are met and tasks are completed on time
• Evaluating project risks and making recommendations for mitigration of identified risks
• Providing regular progress reports to clients on the status of projects
• Communicating with architects, engineers, contrators, subcontractors, suppliers, and other parties involved in the project
• Ensuring all project documentation is completed according to company standards and laws