Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

The High School is now recruiting for a dynamic teacher dedicated to learner-centered education for August 2024. We are welcoming applications for IGCSE/IB Diploma teachers of Design Technology.

Position requirements:

Minimum relevant Bachelor's degree.
Teaching certification/diploma.
Minumum 4 years teaching IGCSE/IB Diploma Design Technology.
Excellent communication skills and able to effectively communicate with parents, students, teachers, school administration and external agencies when necessary.
Exemplary verbal and written English.
Excellent time management and adaptability.
International school experience preferred.
Good confidential references on request, reflecting the qualities listed above.

Our team is looking for a full / part time art teachers. The candidate will be required to conduct and facilitate lessons for children aged 4 to 17 years old through a wide and creative array of arts. You will gain valuable work experience in arts education with children and our management.

Requirements:

§ At least a Diploma in Fine Arts, Design or related fields.

§ Absolute love, patience and care for children

§ Fast learner, able to handle and communicate effectively with children and parents

§ Passion in art, Independent, self-motivated and responsible

§ Able to work during weekends

§ English and Mandarin spoken

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently on the lookout for a Game Design Intern to join us!

Responsibilities:

Collaborate with the game design team to create game concepts, mechanics, and systems

Assist in designing and balancing game levels, and challenges

Conduct playtesting and provide feedback on game mechanics and user experience

Assist in creating and maintaining game design documentation and spreadsheets

Requirements:

Has education background in game design or game development

Proficiency in Unity is a bonus.

Excellent communication and teamwork skills.

Ability to work independently and take initiative.

What’s in it for you!

Excellent projects and team members conducive to personal growth

Vibrant work environment

Well stocked pantry

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Conduct material and field research and verify facts before scripting for production.
• Provide advice to producers based on the facts/data gathered.
• Build script draft and sequence for content flow and eventually write good quality Chinese scripts for programme.
• Brainstorm interesting programme concepts and do presentation at pitch sessions.
• Source for talent and assess suitability of role based on requirement of programme.
• Source for location and assess for suitability and cost.

• Minimum a degree in education with 2 years of working experience.
• Passionate about the entertainment industry.
• A strong communicator and has a flair for writing.
• Possess good research skills.
• Good command of Chinese language - both written and spoken as you will be attached to the Chinese Entertainment production.
• Effectively bilingual in Mandarin and English to communicate with various departments and organisations.

Responsible for business development and selling of exhibition booths and sponsorship on a daily basis for assigned shows. Work with management team and follow sales strategies as instructed by supervisor to ensure sales targets are met. Ensure the company's standards of sales performance are met.

THE ROLE

They are now looking for an established Exhibition Sales Manager to join their innovative team to continue to drive success across the business.

Key responsibilities include:

• Client management
• Building and developing relationships
• Identifying new business opportunities
• Selling stand-alone exhibition space
• Taking briefs and pitching for new business
• Upselling and cross selling additional services
• Working closely with management to ensure sales strategies are in line with the marketing of the business
• Attending industry networking events/ exhibitions to meet new contacts and generate business

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China, Singapore, South Korea, and Europe on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

UWCSEA Dover has a vacancy for an Art Technician from May 2024. Reporting to the Heads of Art, the successful incumbent will support the Art department and teachers with inventory and the creation and delivery of curriculum needs and materials.

Main Responsibilities

• Preparation of materials and provide classroom support for Teachers (delivery of iPad trolley, inventory and restocking of classroom supplies etc.).
• Assist in classroom routines and curriculum such as mounting/framing and hanging of artwork in the College, including annual Art exhibitions, GCSE exams, College displays etc.
• Conduct and maintain storeroom supply inventory.
• Assist students with technical constructions (i.e. general wood cutting).
• Work with a variety of common workshop tools and maintain the inventory, operation and proper storage of art tools (i.e. ceramics kiln, 3d printer, laser cutter etc. *Training for these tools can be provided.).
• Attend to any other duties as assigned.

Person Specifications

• Minimum Diploma in any related discipline with 2 years of experience.
• Relevant experience as a school art technician is desirable but will consider someone who has a good work history.
• Good initiative, self-management and communication skills.
• Ability to use basic woodcutting tools (i.e. cutting plywood down to standardised sizes)
• Knowledge of laser cutter, 3D printer, ceramics kiln is highly desirable, but some training can be provided.
• Ability to stretch canvas on frames.
• Ability to work independently and as part of a team.
• Approachable, friendly, and willing to assist in problem-solving.
• Able to manage time efficiently and prioritise tasks in the department.
• Physically fit to carry and handle artworks and materials (i.e. 10kg bags of clay).

Application

Apply via our portal by Tuesday, 2 April 2024 at 11:59pm Singapore Time.

The UWC Mission is to make education a force to unite people, nations and culture for peace and a sustainable future. We are committed to creating a community in which all members feel safe and secure, and know that their authentic selves and individual differences are accepted with respect and care. At UWCSEA, we acknowledge that diversity, equity, inclusion and justice (DEIJ) is an ongoing and evolving process and strive to create and sustain a sense of belonging for all members of our community, past, present and future. All qualified applicants, including those who identify as a part of marginalized group(s) and individuals with (dis)abilities are all encouraged to apply. Our school is committed to safeguarding and promoting the welfare of all the students in our care and expects all applicants to share this commitment. We follow safe recruitment practices and all appointments are subject to interview, satisfactory references, identity and criminal record checks.

• Prepare work schedule.
• Prepare P/O or W/O for suppliers and tradesmen.
• Liaise with clients, suppliers and tradesmen for delivery and commencement of work.
• Monitor site progress and inform sales personnel and clients accordingly.
• Ensure quality of work is done according to design provided by sales personnel.
• To co-ordinate touch-up or rectification works, if any.
• To ensure project is completed on time according to work schedule.
• Ensure proper housekeeping on site.

Role and Responsibilities:

• Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Senior Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification

Requirements:

• Minimum BSEE with hands-on experience in IC Design flow.
• Familiarity with modern EDA tools such as Cadence, Mentor, Synopsys etc.
• Have working knowledge in analog building blocks such as bandgap reference, LDO, amplifiers, low noise amplifiers
• Understanding of ADC topologies eg Delta-Sigma, SAR, flash, integrating etc … advantageous
• A good team player with good communication skills
• Enthusiastic and independent worker.
• Willing to work in Tampines

Responsibilities:

• Manage and support the interior design development and coordination process throughout the design and documentation phases.
• Manage the execution of interior works from tender till completion and handover
• Monitor to ensure resolution of design and technical coordination issues at site
• Review of Contractors’ submissions, work schedules, materials samples, shop drawings etc.
• Conduct site & factory visits, monitoring of quality of on and off-site fabrication
• Monitor and report of interior works progress and qualities, to ensure delivery timeline and workmanship

Requirements:

• Degree in Interior Architecture / Architecture or any related field
• At least 6 years of relevant experience in Interior Design & Site Execution, preferably with premium residential, offices, hotels experiences
• Self-driven, and able to work independently.
• Ability to multi-task and to work under pressure.
• Excellent problem-solving skill.
• Strong organizational, communication and interpersonal skill.
• Proficient in Project Management Programs, AutoCAD, SketchUp, 3D Max, Illustrator or other design programs, Microsoft Excel, Word, etc.

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Responsibilities:

• Collaborate closely with the Project Director and multidisciplinary teams to develop innovative design solutions, from concept through to construction.
• Manage project and design processes, ensuring timely delivery and adherence to deadlines, budgets, and regulatory requirements.
• Supervise and review drawings to ensure design constructability, contributing to firm-wide design excellence and problem-solving.
• Demonstrate creative thinking abilities and contributes to firm-wide design excellence and problem solving.
• Provide influencing ideas to enhance team productivity.
• Collaborate with project managers to execute design visions within project constraints, including timelines, budgets, and regulatory requirements.
• Ensure project filing is accordance to officewide standard system.
• Incorporates integrated sustainable design solutions into projects.
• Participates in managing client relationships and representing Company Brand when meeting with clients and other consultants.
• Attend presentations and meetings with client, consultants, and key stakeholders.
• Understands company agreements, contracts, and deliverables, and assures that company standards for project management are met.
• Contribute to the firm's promotion by participating in professional organizations and events, including international travel for project meetings, site visits, and business development as necessary.

Requirements:

• Bachelor's or Master's degree in Landscape Architecture, Architecture, or related field from an accredited institution.
• 7 to 10 years of professional experience in landscape architecture or related design field, demonstrating creative excellence.
• Proficient in AutoCAD, Revit, Adobe Creative Suite, SketchUp, Rhino; familiarity with BIM (Building Information Modeling) is a significant asset.
• Exceptional verbal and written communication skills, able to present concepts clearly and persuasively.
• Strong teamwork and interpersonal abilities, with experience in multidisciplinary collaboration.
• Professional licensure preferred but not required.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline transmitter >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline receiver >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D AutoCAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

• Support the Technical section in the Power and Renewables team for the development of Renewable Generation Projects
• Perform site assessments and evaluate engineering designs for ground mounted solar projects throughout the project lifecycle
• Follow up on the detail engineering phase with selected partners, ensuring compliance with Technical Specifications and relevant legal requirements of the Renewable Generation Projects
• Support the execution of Renewable Generation Projects with strict compliance of HSE, Environmental, Quality and Keppel relevant policies
• Supervise and oversee the on-site construction and commissioning processes to ensure the projects meet the design specifications
• Provide technical input for Operation & Maintenance activities (such as O&M manual, solar monitoring setup, etc.)
• Stay abreast of industry trends, new technologies, and best practices to improve project delivery continuously
• Ensure proper coordination between the Renewable Generation Projects and the rest of the Keppel stakeholders involved in the development of the Power Generation and Transmission Projects
• To undertake additional duties and responsibilities as deemed necessary

Requirement

• A Diploma in Electrical or Energy Engineering
• Strong technical knowledge of electrical engineering principles, including AC and DC systems
• Proficiency in industry-standard design tools, such as PVsyst, Helioscope, SolarGIS, and Homer Pro
• Proficiency in AutoCad
• Detailed knowledge and experience of modern Health, Safety and Environmental practices
• Good understanding, technical knowledge and experience in the Design and/or Construction of large-scale ground mounted Solar PV Power Project

Period of work: March - May 2024

Responsibilities:

1. Create communication materials such as flyers, posters, menus, brochures advertisements for various events, activities and promotions
2. Work closely with other departments to conceptualise, develop and produce suitable marketing and publicity material
3. Provide photography assistance for F&B promotions and other purposes
4. Liaise with vendors for production of print materials
5. Manage and update the website and Plasma TV as needed
6. Provide logistical support for the Annual General Meeting

Any other duties as assigned from time to time.

Requirements:

1. Min Diploma in Graphic Design/ Multimedia or equivalent
2. Proficient in various graphics, multimedia and digital design tools eg. Photoshop, Freehand, PageMaker, FrontPage, Illustrator, Flash etc
3. A teamplayer with excellent artistic and creative design skills
4. Able to work independently with initiative and a good eye for details, highly meticulous and observe all deadlines.