As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Understanding the client requirements and quantities take off as per marking and RCP drawings.
• Preparing BOQ (bill of quantities) by studying specification sheets from the sales team.
• Identifying gaps between BOQ and drawings, specifications and conditions of the contract and taking it for a logical closure.
• Monitor and control costs throughout the project, identifying cost-saving opportunities.
• Participation in the pre-tendering activities with client, architect and project managers and raising relevant pre-bid queries from the given tender.
• Preparing the initial quote and contract for the sales team from the company’s side.
• Coordination with the design team for analysing architectural and service drawings.
• Manage the valuation of work done and handle claims and variations.
• Preparing interim and final valuations, variations and claims of the construction site.
• Conduct feasibility studies and value engineering exercises.
• Collaborate with stakeholders to optimise project outcomes and achieve value for money.
• Reviewing construction plans and preparing quantity requirements.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.

Make orders for construction materials and other items as requested.

•  Ensure timely delivery of orders.
•  Ensure all delivery orders are in accordance to PO and verification of DO for preparation of payment.
•  Call for quotations and source for new supplies if need and recommendation of award.
•  Follow up on complaints on product quality.
•  Process and generate PO/RO
•  All other tasks assigned

• Bachelor’s degree in quantity surveying, engineering, construction management or a related field.
• 3+ years of experience in quantity surveying in the construction industry.
• Sound knowledge of construction industry practices, regulations and standards.
• Proficiency in cost estimation and cost management techniques.
• Familiarity with contract administration and legal aspects of construction projects.
• Understanding general contracting, design-build, package contracting, value-based project and loading margins and lumpsum in commercial fit-out, residential, hotel or retail projects.
• Experience working with AutoCAD and validating quantities from the given drawings.
• Ability to manage multiple projects simultaneously and prioritise tasks effectively.
• Strong analytical and problem-solving skills with extraordinary negotiation abilities.
• Proficiency in relevant software and tools for quantity surveying.

Summary:

• Basic up to $8000 (depending on experience)
• Yearly AWS
• Project incentives
• Profit sharing
• Location: Telok Blangah
• 5 days work week @ 10.00am - 6.30pm
• Career advancement

Key Responsibilities:

• Conceptualize and lead the design of luxury events and exhibitions
• Oversee the creation of 3D renderings, technical drawings and layouts
• Mentor and manage a team of designers to deliver exceptional work
• Manage vendors and contractors for seamless execution
• Conduct site visits to optimise spatial layout and attendee experiences
• Work closely with production team to align the design with client needs and ensure budget compliance
• Other relevant ad-hoc duties

Key Requirements:

• Min Degree in Interior Design or related field
• Min 7 years of experience in luxury, lifestyle and fashion event design
• Proficiency in design software (3ds Max, Adobe Creative Cloud, SketchUp, AutoCAD)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

The Associate Producer will play a key role in supporting the production of events, exhibitions, and experiential marketing projects. This position requires a detail-oriented individual with excellent project management skills and a passion for creative solutions. The Associate Producer will work closely with senior producers, creative teams, and clients to ensure the successful execution of projects from conception to completion.

Role & Responsibilities:

• Assist in the planning, coordination, and execution of events, exhibitions, and experiential marketing projects.
• Work closely with the Account Managers and Senior Producers to develop project timelines, budgets, and deliverables.
• Coordinate with internal teams (design, production, logistics) and external vendors to ensure project requirements are met.
• Support the development of creative concepts and proposals in response to client briefs.
• Manage project documentation, including schedules, budgets, and contracts.
• Assist in on-site event management, ensuring smooth operations and addressing any issues that arise.
• Maintain clear and effective communication with clients, providing updates and addressing any concerns.
• Conduct post-event evaluations to identify areas for improvement and gather client feedback.
• Stay updated on industry trends and best practices to bring innovative ideas to projects.

Qualifications:

• Diploma or bachelor’s degree in Event Management, Marketing, Communications, or a related field.
• At least 4 years of experience in event production, project management, or a related role.
• Strong organizational and time management skills, with the ability to manage multiple projects simultaneously.
• Excellent communication and interpersonal skills.
• Creative problem-solving skills and a keen eye for detail.
• Ability to work under pressure and adapt to changing project requirements.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Location: Henderson Road

Salary Range: Up to $8000 + AWS + Profit Sharing

Work Timings: Monday to Friday (10 am - 6.30pm)

SCOPE OF WORK

• Creative Conceptualisation: Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions that captivate audiences. Initiate and lead group ideation sessions
• Output: Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Team Leadership: Lead and inspire a team of designers
• Team Supervision: Oversee the design workflow for events and branded exhibitions, including 3D renderings, layouts, technical drawings and shop drawings of the design team
• Resource Planning: Projects allocation for the design team to ensure efficient turnaround
• Inter-department Collaboration: Work closely with our account servicing team and production team in ensuring the design is aligned with the client’s requirements from conceptualization to production, and also ensuring budget alignment for designs
• Vendors Liaison: Communicate closely with vendors and contractors to ensure seamless execution of design elements and production details
• Site Assessments: Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Mentorship: Provide mentorship, guidance, and professional development opportunities to members of the design team, fostering their growth and skill development
• Timeline Management: Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• External Agencies & Freelancers Management: Managing workflow with external freelancers when specialized skills or additional resources are needed

QUALIFICATIONS

• Bachelor’s or Master’s degree in Interior Design, Exhibition Design, or a related field
• Minimum 7+ years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• A dedication to creativity and a keen eye for aesthetics
• Strong portfolio of creative 3D design work and detailed technical drawings
• Proven track record in leading and managing creative teams; strong leadership anmentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills, with the confidence to pitch ideas and concepts to high-profile clients and internal teams
• Proficiency in design software such as 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD
• Demonstrated ability to balance multiple projects, applying both creative vision and practical logistics
• Exceptional attention to detail and problem-solving skills, with a passion for delivering elevated, impactful design.

EA Personnel Name: Chong Yeoh Choo

EA Personnel No: R1437462

EA License No: 21C0845

Purpose of the Role:

The Office Admin Executive plays a critical role in ensuring the smooth operation of the office and supporting the team at A Life By Design Group. This role involves managing administrative tasks, coordinating office activities, and providing support for the successful execution of interior design projects.

Key Responsibilities

Office Administration:

1. Manage and maintain office records, documents, and correspondence efficiently.

2. Coordinate procurement and inventory management of office supplies, ensuring stock availability.

3. Oversee the maintenance of office spaces, liaising with vendors and contractors for upkeep.

4. Organise and schedule appointments, meetings, and team calendars.

5. Provide office support, including document preparation, filing, and correspondence handling.

6. Coordinate mail and courier services, ensuring timely distribution and receipt.

7. Maintain a database of vendors, suppliers, and partners for project-related support.

8. Manage petty cash and maintain accurate financial records for reimbursements and claims.

Project and Team Support:

1. Assist with project logistics, such as sourcing materials, coordinating deliveries, and tracking deadlines.

2. Manage travel arrangements, bookings, and accommodations for site visits or business trips.

3. Support leadership with preparation of meeting agendas, taking minutes, and following up on action points.

4. Organise team events, workshops, and celebrations to foster a collaborative work environment.

Ad-Hoc Responsibilities:

1. Handle any other ad-hoc tasks as required to support office operations, leadership, or project execution.

2. Adapt to the evolving needs of the business and provide assistance as needed to ensure organisational efficiency.

Requirements and Skills:

· Diploma or degree in Business Administration, Office Management, or a related field.

· 3-5 years of experience in office administration or a related role.

· Prior experience in the interior design, creative, or architectural industry is highly advantageous.

· Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and other administrative tools.

· Strong written and verbal communication skills to interact professionally with team members, clients, and vendors.

· Ability to draft professional correspondence, reports, and presentations.

· Exceptional organisational and time management skills, with the ability to prioritize and handle multiple tasks efficiently.

· Detail-oriented and able to maintain accuracy under tight deadlines.

· Proactive and resourceful in finding solutions to administrative and operational challenges.

· Capable of working independently with minimal supervision.

· A team player with excellent interpersonal skills to collaborate across departments.

· Adaptability to work in a dynamic, creative environment.

· Discretion and ability to handle confidential information with professionalism.

· Enthusiastic, self-motivated, and able to take initiative when needed.

· Flexible and willing to take on any other ad-hoc tasks to support the business and team.

Working Conditions:

· Full-time role with standard office hours (e.g., Monday to Friday, 9 AM - 6 PM).

· Monthly salary ranges between SGD 2,800 and SGD 3,500, depending on qualifications and experience.

Purpose of the Role:

The HR Manager will oversee all human resource functions, including recruitment, employee relations, performance management, and compliance. Reporting to the CEO, the role involves ensuring HR policies align with business goals, fostering a positive workplace culture, and managing HR operations effectively. This position requires strong organisational skills, excellent communication, and a focus on supporting employee growth and satisfaction.

Key Responsibilities

Recruitment and Onboarding:

1. Oversee the full recruitment cycle, including job postings, interview processes, and candidate selection.

2. Prepare and execute employment contracts, onboarding plans, and orientation programs for new hires.

HR Administration:

1. Maintain up-to-date personnel records, contracts, and compliance documents.

2. Manage employee benefits, including insurance plans and wellness initiatives.

3. Ensure timely preparation and submission of all required HR documentation, including work passes and compliance reports.

Employee Relations and Support:

1. Act as the first point of contact for employees regarding HR-related queries and issues.

2. Foster a positive workplace environment through engagement activities and addressing employee concerns.

3. Assist with leave management, including sick leave, maternity leave, and vacation scheduling, in coordination with finance.

Policy and Compliance:

1. Develop, update, and implement HR policies, ensuring they align with legal requirements and best practices.

2. Oversee and ensure compliance with employment laws and regulations, including work passes and contracts.

3. Support the preparation and review of the company handbook, ensuring clarity and relevance.

Performance Management and Development:

1. Support the performance review process by assisting managers in setting objectives and preparing appraisal forms.

2. Recommend and coordinate employee training and development programs to enhance skills and growth.

3. Monitor and address performance issues, escalating to management where necessary.

Strategic HR Initiatives:

1. Contribute to workforce planning by identifying talent gaps and recruitment needs.

2. Collaborate with management on employee retention strategies and engagement programs.

3. Conduct market research to recommend competitive benefits and remuneration packages.

Additional Duties:

1. Support administrative tasks for the leadership team, including meeting arrangements, minute-taking, and travel coordination.

2. Assist with ad-hoc HR-related projects or initiatives as assigned by management.

3. Maintain confidentiality and act with discretion in handling sensitive HR matters.

Requirements and Skills:

· Diploma or degree in Business Administration, Office Management, or a related field.

· 3-5 years of HR management experience.

· Strong knowledge of employment laws and best practices, particularly in the Asia Pacific region.

· Excellent communication, interpersonal, and influencing skills.

· Experience with HR software (e.g., Quick HR or similar platforms).

· Proficiency in MS Office applications.

· Ability to prioritise important projects, manage workloads independently, and maintain a high degree of discretion and confidentiality.

· Proficiency with Microsoft Teams, Google Drive, SharePoint, and other Microsoft tools.

Working Conditions:

· Part-time role with flexible office hours, typically two days per week (Monday to Friday, 9 AM - 6 PM).

· Monthly salary ranges between SGD 2,320 and SGD 3,000, depending on qualifications and experience.

Job Description: As a Project Executive in Interior Design, you will be responsible for overseeing the planning, coordination, and execution of design projects. You will manage a team of designers, liaise with clients, and ensure that all projects are delivered on time, within budget, and to the highest standards of quality.

Key Responsibilities:

• Lead and manage multiple interior design projects simultaneously, from initial concept to final installation.
• Develop project timelines, budgets, and resource allocations.
• Collaborate with clients to understand their vision and requirements, providing expert guidance throughout the design process.
• Coordinate with architects, contractors, and vendors to ensure design integrity and successful execution.
• Monitor project progress, conduct site visits, and implement corrective actions as necessary.
• Facilitate communication between internal teams and external stakeholders to ensure alignment and transparency.
• Prepare and present project updates and reports to clients and senior management.

Qualifications:

• Diploma or Bachelor’s degree in Interior Design, Architecture, or a related field.
• 3 years of experience in project management within the interior design industry.
• Strong knowledge of design principles, project management methodologies, and industry standards.
• Proficiency in design software (e.g., AutoCAD, SketchUp, Adobe Creative Suite).
• Exceptional leadership, organizational, and communication skills.
• Ability to manage multiple projects and adapt to changing priorities.

What We Offer:

• Opportunities for professional development and advancement.
• A creative and collaborative work environment.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven