Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Responsibilities for Interior Designer

• Determine scope of work
• Negotiate fees clients and vendors
• Set project schedules
• Research plans to ensure they are technically feasible
• Produce rough sketches and storyboards
• Use CAD software to develop detailed designs
• Select appropriate material for the design and budget
• Advise clients on project progress

Qualifications for Interior Designer

• Proficient in CAD
• Well versed in design and 3D awareness
• Mastery with visualizing concepts and explaining to others
• Experience in design consultancy
• Skilled at inspecting and surveying buildings
• Forward thinking in design concepts
• Willingness to travel to client sites
  

Role Summary:
Tree Art International is looking for enthusiastic Course Consultants to join our team on weekends. As a Course Consultant, you’ll serve as the point of contact between Tree Art and prospective customers. The incumbent identifies and educate prospective customers on the Company’s course curriculum and supports customers by providing information and assistance with closing.

Key Responsibilities:

• Proactively engage with customers in-store, introducing them to our art programs and highlighting the benefits
• Conduct consultations to understand customer needs and recommend suitable courses
• Drive the enrollment for trial classes and sign-ups by presenting program details effectively
• Handle inquiries and provide accurate information on course content, schedules, and fees
• Support marketing initiatives to promote courses and trial classes
• Maintain accurate records of leads and registrations

Requirements:

• Current Polytechnic or ITE students from any field are welcome.
• Strong communication and persuasion skills
• Friendly, outgoing, and able to engage with various customer profiles
• Available to work on both Saturdays and Sundays
• Interest in art or experience in sales is a plus

Benefits:

• Competitive hourly rate
• Sales training and experience in customer relationship management
• Fun, creative work environment with opportunities to learn about art education

Summary:

The Associate Producer will play a key role in supporting the production of events, exhibitions, and experiential marketing projects. This position requires a detail-oriented individual with excellent project management skills and a passion for creative solutions. The Associate Producer will work closely with senior producers, creative teams, and clients to ensure the successful execution of projects from conception to completion.

Role & Responsibilities:

• Assist in the planning, coordination, and execution of events, exhibitions, and experiential marketing projects.
• Work closely with the Account Managers and Senior Producers to develop project timelines, budgets, and deliverables.
• Coordinate with internal teams (design, production, logistics) and external vendors to ensure project requirements are met.
• Support the development of creative concepts and proposals in response to client briefs.
• Manage project documentation, including schedules, budgets, and contracts.
• Assist in on-site event management, ensuring smooth operations and addressing any issues that arise.
• Maintain clear and effective communication with clients, providing updates and addressing any concerns.
• Conduct post-event evaluations to identify areas for improvement and gather client feedback.
• Stay updated on industry trends and best practices to bring innovative ideas to projects.

Qualifications:

• Diploma or bachelor’s degree in Event Management, Marketing, Communications, or a related field.
• At least 4 years of experience in event production, project management, or a related role.
• Strong organizational and time management skills, with the ability to manage multiple projects simultaneously.
• Excellent communication and interpersonal skills.
• Creative problem-solving skills and a keen eye for detail.
• Ability to work under pressure and adapt to changing project requirements.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Key Responsibilities:

· Lead the design and implementation of the security architecture for projects within the GovTech scope.

· Perform comprehensive risk assessments and implement security controls for cloud and on-premises solutions.

· Collaborate with internal teams and stakeholders to ensure security by design is embedded in all solutions.

· Develop secure architectural frameworks based on best practices, ensuring alignment with business requirements and compliance regulations.

· Conduct security assessments of infrastructure, systems, and applications to identify vulnerabilities and develop remediation strategies.

· Stay up-to-date with emerging security threats, technologies, and best practices to continuously improve the security posture of the organization’s systems.

Qualifications:

The ideal candidate must possess internationally recognized professional security certifications related to risk assessment and security design services, such as:

· ISACA Certified Information Security Manager (CISM)

· Cybersecurity Practitioner (CSX-P)

· Certified Information Systems Security Professional (CISSP)

· CISSP-Information Systems Security Architecture Professional (CISSP-ISSAP)

· Certified Cloud Security Professional (CCSP)

· AWS Certified Solutions Architect (Professional, Associate)

· AWS Certified Security

· Azure Solution Architect or Security Engineer

· Google Cloud Certified Professional Cloud Architect

· Cisco Certified Architect (CCAr)

Additional Skills:

· Strong understanding of security frameworks such as NIST, ISO 27001, and CIS controls.

· Experience with cloud platforms such as AWS, Azure, and Google Cloud in a security architecture capacity.

· Excellent problem-solving and analytical skills.

· Strong written and verbal communication skills, with the ability to clearly articulate complex security concepts to technical and non-technical stakeholders.

· Proven ability to manage multiple projects and meet deadlines under pressure.

Experience:

· Minimum 5-10 years of experience in security architecture and design, preferably in a government or highly regulated environment.

· Demonstrated experience in working with cloud security, network security, and application security.

Application Process:

Interested candidates who meet the qualifications and experience requirements are encouraged to apply with a resume and cover letter detailing their relevant certifications and experience in security architecture.

This is an opportunity to be a key player at a company with a great reputation in IoT semiconductor technology and growing business. We are looking for experienced/senior engineers to join our team in Singapore and be involved to develop the next generation IoT/AI chips based on a revolutionary architecture.

1. Work with team to define the design of WIFI/BT related modules.
2. Develop RTL design of one or more blocks, define RTL module partition, timing requirement etc.
3. Work with multi-disciplinary groups to make sure designs are delivered on time and with highest quality by incorporating proper checks at every stage of the design process.
4. Assist with the development of company documentation and generation of patents.

Qualification

1. Master's degree in Electrical Engineering (or equivalent), with 5+ years’ industry experience.
2. Team player, with good problem solving and communication skills.
3. Proficiency in System Verilog for RTL logic design and verification.
4. Familiarity with the design of digital MAC/baseband/high-speed interface/CPU or DSP is a plus.
5. Experience in Architecture/Block definition for SOC system such as WiFi, Bluetooth and GNSS.
6. Experience in micro-architecture design, and RTL coding with Verilog, familiar with Cadence and Synopsis tools.
7. Experience in synthesis, with analysis of power, timing and area.
8. Review micro-architecture to meet specification requirements and perform Design Quality Check
9. Experience in RTL and gate level simulation, unit test, system test and EDA verification

At Mediatek’s Memory Design Automation team, we work seamlessly with worldwide memory design team to deliver high performance, low power and small area in-house memories design kits and design flows under advanced technology nodes. We are looking for candidate to join us as memory design automation engineer for the delivery of robust memory and development of Memory Compiler automation flow.

Responsibility

1. Responsible for cutting edge technology node’s SRAM compiler design and deliver best quality of design kit.
2. Seamlessly collaborate with SRAM design and layout team to achieve highest quality of design kit delivery.
3. Responsible for data analysis and platform development of memory usage big data.
4. Responsible for physical verification (DRC/ERC/LVS/ANT/PERC) on SRAM compiler.
5. Responsible for spice simulation on timing, power and noise on SRAM compiler.
6. Responsible for QA check and development on SRAM compiler.

Requirements

1. Bachelor or Master Degree in Electrical and Electronic Engineering or Computer Engineering or Computer Science.
2. Multi-task capability and strong self-driven characteristics to meet challenging schedule.
3. Proficient with Perl, Shell, Python, C/C++ languages, knowledge with AI machine learning algorithm and infrastructure is an added advantage.
4. Strong interpersonal skills to work with team members with multi-cultural environment
5. Knowledge of high performance, low power SRAM/ROM and VLSI design is an added advantage. Experience with EDA tools will be helpful.
6. Candidate with experience is preferable.

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Mediatek’s Memory Design Automation team is looking for fresh talent to join us as a modeling engineer for the development of behavioral, FPGA, timing and DFT simulation models. The role will be required to create, debug and optimize SRAM models for ASIC design flow.

The candidate must be a team player, able to communicate clearly and concisely to deliver quality work on time.

About the team:

The Mediatek’s Memory modelling team collaborates with the world-wide memory design teams to create and qualify front-end models for use in the ASIC design flow. Team members will also be expected to perform circuit design verification to ensure memory circuits robustness.

What you do:

• Develop and integrate automation code into existing memory compilers to generate models meant for ASIC design flow.
• Develop automation flow and scripts with Perl or Python.
• Execute EDA tools from vendors such as Synopsys, Mentor to verify models’ correctness.
• Stay up to date with current modeling standards and development to improve models and flows for better memory IP performance.
• Work with memory design, compiler team and DFT team and tool vendors to resolve model issues and find solutions.

What you bring:

• Must have a Bachelor’s degree or higher in Electrical Engineering, Electronics Engineering, or related discipline with at least 3 years of semiconductor industry experience.
• Have at least 3 years experience using Linux systems.
• Good understanding of verilog syntax and its various aspects, such as behavioral, RTL and synthesizable verilog is a must.
• Good understanding of liberty timing syntax.
• Good understanding of upf and system verilog.
• Knowledge and experience with EDA simulation tools such as VCS, NC is required
• Experience with EDA tools will be helpful:

o DFT: Logicvision, Tessent, Fastscan

o Synthesis: Design compiler, Genus

o Simulation tools:VCS, QuestaSim, NC

o STA tools such as PrimeTime

• Good scripting and flow automation skills, in Perl or Python.
• A team player, meticulous, able to work and learn independently are important attributes for this job.

Location: One North, Singapore

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. of 8 years of relevant verification experiences.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Responsibilities:

• Manage and support the interior design development and coordination process throughout the design and documentation phases.
• Manage the execution of interior works from tender till completion and handover
• Monitor to ensure resolution of design and technical coordination issues at site
• Review of Contractors’ submissions, work schedules, materials samples, shop drawings etc.
• Conduct site & factory visits, monitoring of quality of on and off-site fabrication
• Monitor and report of interior works progress and qualities, to ensure delivery timeline and workmanship

Requirements:

• Degree in Interior Architecture / Architecture or any related field
• At least 6 years of relevant experience in Interior Design & Site Execution, preferably with premium residential, offices, hotels experiences
• Self-driven, and able to work independently.
• Ability to multi-task and to work under pressure.
• Excellent problem-solving skill.
• Strong organizational, communication and interpersonal skill.
• Proficient in Project Management Programs, AutoCAD, SketchUp, 3D Max, Illustrator or other design programs, Microsoft Excel, Word, etc.

Job Description: We are seeking a dynamic Sales and Marketing Executive to join our team. The ideal candidate will play a crucial role in driving sales and marketing initiatives, promoting our printing services, and expanding our client base.

Responsibilities:

• Develop and implement effective sales and marketing strategies to achieve business objectives.
• Generate leads, cultivate relationships, and negotiate contracts with potential clients.
• Provide excellent customer service and maintain strong relationships with existing clients.
• Prepare simple daily sales reports.

Requirements:

• Proficiency in English and Mandarin languages for effective communication with clients.
• Experience in either printing industry (1 to 2 years) or sales (2 to 4 years) is preferred.
• Strong sense of responsibility and a positive work attitude.
• Self-driven with a proactive approach to seeking out opportunities for growth and improvement.
• Proficiency in Microsoft Office suite.

Compensation:

The commission scheme will be based on the candidate's experience and performance, to be discussed upon successful interview.

If you are passionate about sales and marketing, possess the necessary skills, and thrive in a dynamic work environment, we encourage you to apply for this exciting opportunity. Join us in shaping the future of and making a difference in the printing industry today!