ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

1. MAIN DUTIES AND RESPONBILITIES

a. Helping to build good customer relations and arranging staff meetings

b. Training and development and handling complaints and queries (from customers and staff)

c. Arranging promotional events and carrying out client satisfaction surveys and reviews.

d. Reviews the arrival list daily and assists in preparing and distributing welcome amenities.

e. Always be present in the entrance and should maintain proper decorum at all times.

f. Promotes all the new and existing beverage and event in the outlet.

2. REQUIREMENTS

a. Ability to work during all business hours (including holidays, events & weekends)

b. Ablity to handle multipal tasks.

c. Will initiate activities that promote the cleanliness and appearance of the premise

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.
   

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

The primary role of the Manager / Assistant Manager, Operations is to provide support to the General Manager and any other persons or companies assigned, in a professional and timely manner.

Meticulous and insightful, this individual possesses excellent communication, negotiation, leadership and people management skills, and is able to work with fellow partners, management and colleagues to execute events within tight schedules and stipulated budget.

This individual must be flexible in terms of job scope and work hours to meet the demands of our fast-paced and dynamic organization. The ideal incumbent will have a cheerful disposition, impeccable personal grooming, is highly independent, resourceful and takes initiative, and has effective communication, time management, planning and organizational skills.

Job Responsibilities

• Define types and scale of the projects, propose a suitable venue, and develop event layout and seating plans
• Maintain good relationship with all stakeholders and source for new stakeholders when required
• Liaise and negotiate with all stakeholders, balancing cost efficiency and optimum performance for the events
• Create and propose profit and loss budget for different project profiles
• Oversee and develop operation plans from the start to the end of the events, including contingency and risk management plans
• Coordinate with vendors such as transportation, accommodation, production, ticketing agent and venue to ensure adherence to event plans, budget and ensuring everything runs smoothly and accurately
• Oversee and manage event expenditure within events budget, liaise with finance on invoicing and payment matters to ensure timely settlement
• Manage and liaise with artiste management on the requirements for the events
• Manage all escalated customer enquiries, requests and feedback promptly and professionally
• Comply with various event’s policies and procedures to ensure that they are within government rules and regulations
• Manage a team of 3-4 members in the operation department and tasking them to different projects
• Evaluate latest technology trends that can be leveraged to spur innovation in events and customer experience
• Recommend measures to improve processes, always strive to do better and adopt best practices
• Resolve all project issues and deviations to ensure that projects are executed as planned
• Review project deliverables to ensure that they adhere to event plans
• Explore and manage all other projects within the team such as exhibition, merchandise and customer experience programs
• Support ad hoc projects as directed by the General Manager

Job Requirements

• Possess at least a Diploma with specialization in Events Management, Mass Communication or Project Management preferred
• Preferably at least 4 years of relevant project management experience, preferably in the field of Events, Entertainment or Exhibition
• Strong interest in the music/entertainment or exhibition industry and possess great knowledge in music trends
• Great attention to detail, is highly responsible and takes pride and ownership in work done
• Excellent people managing skills
• Highly independent and resourceful team player with impeccable integrity
• Strong communication, negotiation, interpersonal, quick problem-solving, time management, and planning and organisational skills
• Able to multitask, work well in a diverse and dynamic environment and under pressure during events
• Fluent in written and spoken English; other language proficiency such as Mandarin/ Korean/ Cantonese is a plus given that you will be interacting with artiste and team who are from other countries and might only speak comfortably in their native language
• Comfortable and have readiness to work longer and irregular hours including weekends during event period

Job Duties:

• Responsible for the taking of quantities, sourcing subcontractors and suppliers, pricing and preparation of submission.
• Assist in sourcing of materials and gather sample material for project use.
• Call for sub-contractors and suppliers quotation.
• Compare sub-contractors and supplier pricing for tenders and awarded projects.
• Prepare PO for awarded supplier and subcontractors.
• Manage progress claim, progress payment and VO claims for awarded projects.
• Able to complete tasks within timeline.
• Tender and contract documents administration, prepare quotation/BQ, Cost Estimate, Cost Control and Budgeting.
• Project administration and documentation

Requirements:

• Diploma or Degree in Engineering/ Building/ Construction Management or related fields
• At least 1-3 years of experience in Retails, Offices and Other Commercial Interior Fit-out coordination.
• Good knowledge in cost and quality control, resource planning and on-site operations
• Proficient in MS Office and possesses good communication skills.
• Responsible, good team player and able to work under pressure.

For interested applicant, kindly send your resume in Word/PDF format, including the following in your resume:

1. Current Salary
2. Expected Salary
3. Availability
4. Reason for leaving

We regret to inform only shortlisted candidates will be contacted.

Roles & Responsibilities

• Responsible for full set of accounts and record transaction data accurately.
• Prepare payments and staff reimbursements
• Prepare financial reporting, closing statements, creating journal entries and manage AR/AP.
• Ensure accurate and updated reconciliations of all balance sheet accounts monthly.
• Assist with financial and tax audits.
• Compile accurate tax-related information for the organization.
• Responsible for IRAS related matters.
• Handle onboarding new employees.
• Managing employee records and HR documentation.
• Assisting with performance appraisals
• Handle HR compliance and legal requirements.
• Update fixed assets and depreciation records in accounting software.
• Prepare and review supplier payments, ensuring compliance with credit terms.
• Generate and maintain payroll and salary reports.
• Update attendance records, leave schedules, overtime, etc.
• Stay updated on MOM guidelines and implement changes as required.
• Assisting in office correspondence and general administrative tasks, and other ad-hoc duties as needed.

Requirements

• Minimum Diploma in Accounting or related field.
• At least 2-3 years of relevant working experience with experience in full-set accounts
• Meticulous, organized, and able to multi-task efficiently.
• Independent, collaborative, and a good team player.
• Proficient in Microsoft Office (Excel & Word).
• Local apply only due to no quota for foreign staff who need for working pass.

For interested applicant, kindly send your resume in Word/PDF format, including the following in your resume:

1. Current Salary
2. Expected Salary
3. Availability
4. Reason for leaving

We regret to inform only shortlisted candidates will be contacted.

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 2 years of hands on with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design
• Training given to candidate with no experience
• 2 rounds of interview (both round will be technical which is related to Physical Design)

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Description & Requirements

Sucessful Candiate should possess the following:

Degree in Quantity Surveying or related discipline with minimum 3 years experience in as QS in Interior fit out / building industry.

The Job:

• Manage Pre-tender to post-contract stages include procurement administration for projects.
• Taking off quantities, read specifications and interpret construction drawings and prepare project budget and recommend to Management for acceptance of contract value for tender submission.
• Responsible for vetting, drafting and negotiation of contract terms including pricing, quantity, management of vendor and sub-contractor. Ability to identify potential contract conflicts or technical issues and propose sound solutions.
• Must be resourceful in sourcing of materials, vendors and sub-contractors to meet the specification and schedule. Ability to evaluate and negotiate prices is an added advantage.
• Attend site show round, carry out site survey where necessary as well as attending tender interview.
• Control and monitor work process, procedures and ensure policy are in order so as to achieve productivity, timely delivery and acceptable standards.
• Project administration and documentation including preparation of interim valuations, pricing and agreement of contract variations, update claim submission and follow up with payment response.
• Determine final costs and variation orders as well as preparing final accounts for submission to client.
• Evaluation, certification and settlement of final cost with vendors& sub-contractors.

The Person:·

• Diploma/Degree in Quantity Surveying or related discipline.
• Minimum of 3 years of working experience as QS in Interior fit-out / building industry.
• Independent, highly self-motivated, proactive and detailed with excellent problem solving skills.
• Good team player and adaptable to a dynamic environment
• Good communication & interpersonal skills, able to interact with people of all levels.
• Independent and Confident to meet tight deadlines
• May require to travel overseas when required
• Proficient in Microsoft Office and AutoCAD

A Day in the Life:

• Manage the day-to-day operations of Kingsmen Exhibits Design Studio (KE Studio) in Singapore
• Lead and manage a team of designers of various disciplines on their day to day tasks
• Seek and procure new Key Accounts for KE studios as well as for Kingsmen Exhibits and the Kingsmen Group
• Work in close collaboration with the Account, Project and Sales Directors and teams to secure new accounts and projects
• Lead in pitching for projects and potential accounts in Singapore and any other Kingsmen office when required, including overseeing the progress through the various stages
• Increase the success rate of design pitches and tender submissions
• Expand KE’s various creative services at the highest level and on a wider geographical spectrum
• Lead and mentor all designers under your charge, improve and better their skills and the level of their design outputs and qualities
• Expand the scope and capabilities of the design manager in KE Studios
• Improve the work processes and efficiencies of KE Studios
• Work in tandem with the Creative Directors of Kingsmen Design Studios on improvements of the administrative procedures and policies
• Perform any other adhoc duties

Successful candidate should possess the following:

Degree/Diploma/Certification in Architecture/Interior Design with 2-3 years experience in concept development, space planning, construction detailed drawings, materials application, budgeting and tender processes for retail and commercial projects. (candidates with lesser years of experience may also apply)

Proficiency in AutoCad, 3D Studio Max, Sketch-up, freehand sketches, Adobe Photoshop, Illustrator and related software.

Basic Roles and Responsibilities

• Ability to create design proposals from conceptualization to visualisation and completion.
• Work independently or with teams to produce high quality presentation drawings, materials and construction drawings
• Manage fast pace, challenging projects with ownership; cooperating with clients and internal partners to ensure successful delivery of projects
• To be able to work with clients and team to completion of project.
• Work with Project team on handling site measurements and communicate with landlords, clients and specialists/ consultants on related design matters.
• To manage and handle clients and vendors independently including presentations and meetings.

The Person:

• Love your job and have good and positive attitude
• Creative and innovative in generating new concepts and ideas
• Result-oriented and passionate to deliver projects successfully
• Able to work independently with a high degree of integrity
• Self-motivated with excellent interpersonal and communication skills
• Good team player with value support and cultivate cooperation among colleagues
• Meticulous and have eye for details.
• Multi-tasking and able to meet tight datelines
• Must be able to communicate in both English & Mandarin.
• Able to interact with all levels and a good team player.
• Able to work within challenging and fast paced environment.

Administrative roles:

• Preparation of basic quotations, contracts and tender submissions.
• Assist team on correspondence, documentation and delivery schedules.
• Sourcing, ordering and delivering of project related materials.
• Record minutes of meetings and prepare emails, faxes, correspondence, memos, etc.
• Manage and maintain office stationeries and pantry supplies
• To assist and work together with ISO team
• To manage and maintain good housekeeping of the entire office together with Superior
• To handle and managed overseas courier services
• To handle phone queries and attend to guests
• Provide administrative and clerical support to HR/Admin manager
• To maintain and manage office equipment
• Ad hoc admin duties assigned by Directors or HODs.

PA roles :

• Co-ordinate and manage MD and EDs’ daily paperwork, emails and claims.
• Organize seminars and travel arrangement, hotels and travel expenses report for MD and ED.
• Prepare presentation materials for MD and ED including tender documents with respective team members.
• Manage phone and emails correspondence for MD and ED
• Manage and arrange appointments with internal and external parties
• Manage and spearhead company’s events and activities with team / committee from planning to execution and completion.
• Managing and reviewing filing system and archives.
• Ad hoc duties assigned by MD and ED.

The Person:

• Minimum 2 years of relevant secretarial / Admin experience preferred
• Proficient in MS Office applications.
• Must be able to communicate in both English & Mandarin.
• Good interpersonal with communication & written skills
• Self-motivated, pro-active, meticulous, well-organized and able to work with minimal supervision.
• Able to interact with all levels and a good team player.
• Able to work within challenging and fast paced environment.

Conceptualize, develop, integrate.

We are seeking a Creative Developer to join our KR+D studio team to be our internal

technology expert, assisting the team in producing and delivering ground-breaking

experiences powered by creative technology.

Our ideal candidate is a team player who can complement our current team members and

bring expertise in back-end development, hardware, and front-end development.

He or she will be responsible for assisting the digital studio manager in solution architecture,

research and development, conceptualization, and production.

A Day in the Life:

• Develop and maintain back-end systems using scripting languages such as Python,

C++, and JavaScript

• Design and implement databases using SQL

• Manage and configure infrastructure

• Develop and maintain hardware systems such as audio-visual, lighting, electronic,

and mechanical

• Collaborate with team members to design and implement front-end web applications

using HTML, JavaScript, CSS, and WebGL

• Write clean, efficient, and well-documented code

• Troubleshoot and debug code as needed

What We Are Looking For:

• Bachelor’s degree in computer science or related field.

• Solid competences with scripting languages such as Python, C++.

• Database design and implementation skills using SQL.

• Experience with front-end web development (HTML, JavaScript, CSS, WebGL).

• Able to setup and manage basic cloud or local infrastructure.

• Experience with hardware (audio-visual, lighting, electronics, mechanical…) is a plus.

• Good ability to work and communicate collaboratively in a team environment.

• Excellent organizational and problem-solving skills.

• Attention to detail and ability to write clean, efficient, and well-documented code.

• Curious and open-minded. Strong willingness and ability to acquire new skills.

• Attention to detail and ability to write clean, efficient, and well-documented code.

• Bonus points if you have a passion for generative AI and have been experimenting

with LLMs and / or Stable Diffusion fine-tuning.

Minimum 3 years experience in carpentry.

• Calculate fabrication materials
• Able to handle multiple projects and task
• Able to understand and read construction and detail drawings
• Ability to communicate with designers
• Ability to value engineer joinery works
• Calculate fabrication materials
• Experience with different trade material characteristic and usage
• Understand fabrication process and flow
• Able to lead a team of carpenter
• Ability to liaise with sub-contractors and conduct pre-construction discussion
• Ability to train non experience and junior production members
• Able to coach and impart knowledge and skill to new and junior production staffs
• Trouble shooting and propose solutions

We are looking for passionate interior designers to join our elite team in converting spaces into functional design. You will have the opportunities to collaborate with our experienced designers who have the track records in creating world-class designs for our delightful clients.

A Day in the Life

• Responsible for timely delivery of services and solutions with professionalism and quality at all times
• Work with lead designers and design teams in supporting design implementation
• Transform creative ideas into functional design concept based on given briefs and ensure that it is in line with clients’ objectives
• Provide space planning and design conceptualisation
• Liaise with clients on quotation and design
• Prepare layout plans, perspective drawings, elevation plans and dimensional drawings
• Present design to client for approval
• Prepare design documentations and material selections
• Work closely with project team, suppliers, sub-contractors and clients during construction/implementation phase
• Perform other ad-hoc duties as required

What We are Looking For

• Diploma/Degree in Interior Design or Architecture
• 3 to 5 years of working experience in Retail and Commercial interior design environment
• Have a strong design sensibility and the technical ability to develop a project from concept to execution
• Possess excellent technical design skills for fixtures with an eye for details
• Proficient in key design tools such as AutoCad, Sketchup, Vectorworks,3D Studio Max, Illustrator, VRay and Photoshop
• Hands-on experience in producing detail drawing and 3D modeling
• Demonstrate a good knowledge of architectural production standards, detailing, building materials, building codes and construction
• Good knowledge space planning & technical design from approved design schematic.
• Creative, resourceful and demonstrate out-of-box thinking
• Team player with a positive attitude as well as the ability to work independently
• Excellent presentation skill as well as verbal and written communication skills

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park - Nearest MRT: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Print Art Director
Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279