Responsibilities:

• Able to handle multiple job sites / projects
• Able to liaise with factory carpenters carpentry production works
• Able to communicate fluently with client’s representative, landlord and authorities
• Able to conduct proper inspection for takeover and handover job site on time
• Conducting regular site inspections to assess project progress, identify risks, and ensure compliance with safety protocols and regulatory requirements.
• Managing schedules, budgets, and resources, and coordinating with clients, stakeholders, consultants, and subcontractors
• Work closely with QS on all material ordering
• Assist the Project Director with additional Project Management responsibilities as needed.

Requirements:

• Experience in reading both ID and M&E drawings, including of ironing out discrepancies in drawings
• Experience in detailing installation works, both ID and M&E
• Experience in restaurant renovation will be an added advantage
• Candidates over 5 years project management or civil experience is an advantage.
• Be willing to work onsite and night for commercial projects.
• Good communication and coordination skills.
• Quickly learning ability.
• Good English and Chinese skill (Listening, oral, read and writing). Can communicate in speaking and writing.

Job responsibilities:

• Assist the WSH Manager to identify and assess risks arising from the workplace.

• Conduct site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations.

• Assist to conduct Safety Committee meetings, organize and promote safety events and campaign, etc.

• Conduct daily toolbox meetings to highlight safety issues.

• Supervise and attend to all issues related to workplace safety, health and environmental control.

• Ensure all documentation / permits / licenses related to work place safety, health and environmental control required by authorities and management are kept in order.

• Assist in conducting periodic WSH cross inspection for all sites to ensure compliance with government safety regulations and industry standards.

• Assist in conducting safety training / briefing such as familiarization on Risk Management’s standardize procedures to the respective site team to ensure safety awareness that the operations are safe and in compliance with statutory regulations and international standards / practices.

• Identify unsafe acts or practice and promptly correct any unsafe condition or practice.

• Any other duties that may be assigned.

Requirements:

• Advance certificate in Workplace Safety & Health/NITEC in Engineering (Environment, Health, Safety) or relevant field.

• Minimum 2 years of relevant working experience

• Familiar with regulatory requirements related to workplace safety and health, and all other aspects of safety

• Possess a high level of the initiative, strong interpersonal and communication skills.

DUTIES & RESPONSIBILITIES

· Liaise with consultants, clients and subcontractors on the progress of M&E works.

· Management of material, equipment and manpower in his section to ensure proper and economic usage.

· In-charge of receipt, transfer and control of M&E construction materials in designated area.

· Enforce the implementation of occupational health and safety procedures in accordance to Project Safety manual.

· To implement and monitor that the permit to work system is properly followed on site.

· To follow all QA/QC procedures and implement CONQUAS standard for site works on site.

· Prepare daily report for related works,

· To ensure the progress of works is on schedule.

· Supervise and ensure works are in accordance to the contract drawings and specifications.

· Coordinate / prepare technical submissions with suppliers / subcontractors.

· Prepare method statement, shop drawings, CSD drawing, installation / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.

· To assist in updating site work status report.

· Assist the Project Manager on all M&E matters including preparing M&E Master Construction and T&C Schedule.

· Liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

· Hold technical discussions with various stakeholders to resolve technical / site issues.

· Ad-hoc duties as assigned by Management.

Roles & Responsibilities

Job Description:
We are seeking a proactive Sales & marketing executive to expand our business by building and nurturing relationships with architectural firms and other stakeholders in the construction industry.

Key Responsibilities:

• Develop and maintain strong networks with architectural firms to promote company products and solutions.
• Identify new business opportunities and manage the sales process from lead generation to closing.
• Provide technical advice and tailored solutions to meet client needs.
• Collaborate with internal teams to ensure seamless project delivery.
• Achieve sales targets and drive revenue growth.

Requirements:

• Diploma/Degree in Engineering, Business, or a related field.
• Proven experience in sales within the construction industry, with a strong network in architectural firms.
• Knowledge of construction materials, systems, or solutions.
• Excellent communication, presentation, and relationship-building skills.
• Self-motivated and results-oriented.

• Sales and target driven
• Providing professional advice on space planning, design conceptualization and materials.
• Conducting site visit and discussion with client on layout plan.
• Oversee interior design process for entire project consistent with project timeline, budget and program.
• Multi-task and able to work independently.
• Good interpersonal & communication skills.
• Preferably bilingual in English & Mandarin to liaise effectively with Mandarin speaking client.
• Knowledge of construction materials, details, furniture, fabrics and lighting etc.

Acting role:

The Technical Controller appointed must possess a civil or structural engineering degree from a recognised institution and have the right qualifications and experience.

Resident Engineers must meet the acceptable qualifications set by BCA.

(Must be qualified by BCA)

Project Manager (Main jobscope)

• Familiar with all the documents submission to relevant government authorities
• Liaise with consultants and/ or sub-contractors engaged on the project
• Attend regular meeetings with client/ owner/ contractors/ sub-contractors and ensure the progress is on schedule
• Identify and comply with all applicable statuary/ regulatory requirements related to project
• Communication to external parties including client, subcontractors, consultants, vendors, etc on project needs, requirements and schedule by means of daily construction oversight
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Monitor and manage day-to-day operations of projects, including developing and coordinating activities with other sub-contractors
• Able to read submission plan.

Job Requirement:

• Candidate must possess at least Bachelor's Degree in Engineering (Civil) recognised by PE Board or equivalent
• At least 8 years of working experience in the related field is required for this position

Roles & Responsibilities

The Senior Quantity Surveyor is responsible for all cost and contractual issues on Main contract as well as Sub-contracts connected to the project.

A summary of the responsibilities for this position is, and not limited to, as follows:

• Preparation of Monthly Progress claims, variation orders and payments to subcontractors
• Involve in managing and reporting of project budget & cost control
• Responsible in Pre & Post-Contracts administration for both the Main Contract and Subcontracts.
• Monitor all financial aspects of the projects to ensure projects run according to budget
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment
• Be familiar with various stages of projects so as to source for the most viable yet reasonable priced materials.
• Able to share new perspectives on cost, orders and claims.
• With the understanding of the contractual legal rights, he/ she will be involved in advising the management on their position of the contract from the tender stage

Skills and Requirements

• Degree/Diploma in Quantity Surveying, Building or Civil Engineering
• Minimum 10 years working experience in SINGAPORE tendering, estimating and measurement of quantities on buildings projects worth at least $100 million.
• Good analytical skills
• Candidates with knowledge in Singapore Institute of Architects (SIA) Conditions of Contract, REDAS, FIDIC, FIDIC Short Form of Contracts will be an added advantage

Email resume to [email protected]

Job description:

• Operates according to company’s quality policy and in compliance to customer’s service standard
• To meet basic and routine requirements of internal and external customers/forwarders
• Communicate and liaise with various external parties pertaining to shipment and orders
• Update distribution database and network
• Maintain and filing of documentation
• May need to support operations if there are any urgent orders.
• Perform other assigned duties as required.

Requirement:

• At least 1 to 3 years of working experience, preferably in a transport/freight/haulage environment
• Good PC and office skills
• Sensitive to details and accuracy
• Good communication skills
• Able to commit Monday to Friday and half Saturday.
• Requires class 3 driving license to cover for driver or urgent delivery if needed

Duties and Responsibilities:

• Identify current and potential product shortages, develop and execute recovery, advise interested parties of status and recovery plans
• Release orders based on material requirements planning (MRP) and coordinate the flow of material throughout the customer order requirements
• Coordinate with Purchasing for availability of raw materials
• Coordinate material movement between vendors, warehouse and the production floor
• Assist in the development, implementation, analysis and coordination of the master production schedule
• Utilize Material Requirements Planning system (MRP) to ensure that data is accurate and up to date
• Facilitate transmittal of customer orders to distribution center and manufacturing facilities including shipment and paperwork of international orders; serve as key contact for customer service inquiries
• Maintain and update master files [items, vendors, etc] including new item setup
• Set up and monitor the integrity of Bill of Materials (BOM) and manage inventory accuracy
• Thoroughly review, familiarize and understand existing BOM structure as well as the physical products
• Key participant in developing and managing company SOP, assembly &parts drawing database process
• Manage inventory levels to meet corporate goals
• Coordinate and manage monthly cycle counts for all manufacturing locations and distribution center; key participant in annual physical inventory
• Support inventory checks to validate inventory accuracy; investigate & reconcile discrepancies & negatives
• Posting of daily production and inventory transactions
• Analyze data and collaborate with others to determine and apply appropriate ordering, inventory, and replenishment policies
• Code and prepareproper paperwork for billing and authorization of invoices per defined processes
• Provide department capacity plans, on a weekly basis
• Assist in maintaining the monthly KPI
• Provide reports and requested information as needed
• All other duties as assigned

Qualifications and Experience:

• Minimum diploma or equivalent with 3-5 years professional experience in manufacturing planning, inventory control, materials planning role
• Knowledge and experience with Sales & Operations Planning
• Strong understanding of MRP and supply chain software
• Advanced computer skills, Excel experience mandatory
• Outstanding planning and organizational skills
• Extremely strong analytical and problem-solving skills

# 6 days work week

# Working Hours: Mondays to Saturdays – 10:45 to 19:30 | Sundays/PH – 10:45 to 17:30

Job Responsibilities:

• Attending to customer’s enquiries at Walk-in Service counter
• Handle and resolve customer complaints
• Maintain of stock inventory
• Preparation of weekly/ monthly report
• Keep front desk neat & tidy with necessary material
• Take up other duties as assigned

Job Requirements:

• “O” Level/ ITE Nitec/ Diploma in related field
• Proficient in Microsoft Office
• Initiative with positive attitude, willingness to learn and must be a team player
• Committed and able to work independently
• Friendly and Customer service oriented
• Good communication skills

Work location: Bedok Mall

Job Responsibilities:

• Ensure daily delivery fulfilment
• Ensure delivery inventory issued for daily delivery
• Ensure delivered items to be in excellent condition when delivered to customer's place
• Responsible for the cleanliness and working condition of company's vehicle
• Any other ad-hoc duties as assigned

Requirements:

• Possess Class 3 license.
• Pleasant and polite, and be able to liaise with English/Chinese speaker
• Familiar with Singapore roads
• Willing to work 5.5days work week + OT as required
• Able to start work immediately or within short notice
• Working location: Woodlands Spectrum / Changi South Street 2

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Salary :

Base salary plus commission

Job Summary:

We are seeking an experienced Construction and Interior Project Manager to lead our construction projects from planning to completion, ensuring they are delivered on time, within budget, and to the required quality standards.

Key Responsibilities:

- Project Planning: Develop comprehensive project plans, including schedules, budgets, and resource allocation.

- Project Execution: Supervise and direct the project team to ensure work is carried out as planned and meets quality standards.

- Team Management: Lead and manage the project team, providing guidance and coordination to various stakeholders, ensuring effective communication and collaboration.

- Issue Resolution: Identify and address issues and challenges in the project, devise solutions, and take appropriate actions.

- Quality Assurance: Ensure the project adheres to quality standards and specifications, collaborate with relevant stakeholders, conduct inspections and audits.

- Progress Monitoring: Monitor project progress, ensure timely completion of work, address delays and changes promptly.

- Compliance: Ensure the project complies with relevant laws and regulations, ensure all work meets safety and environmental requirements.

- Risk Management: Identify and assess risks, develop risk mitigation plans, and oversee their implementation.

- Reporting: Provide regular progress reports to project stakeholders, including project status, issues, and risks.

Requirements:

- Bachelor's degree or related in Construction Management, Civil Engineering, or related field

- Minimum 5 years of experience in construction project management

- Proven track record of successfully managing construction projects

- Excellent communication, leadership, and problem-solving skills

- Ability to work under pressure and meet deadlines

- Familiarity with construction software and technologies

Job Summary:

- Lead construction projects from planning to completion, ensuring timely, within-budget, and high-quality delivery.

Key Responsibilities:

1. Project Planning: Develop comprehensive plans, schedules, budgets, and resource allocation.

2. Project Execution: Supervise and direct the project team to ensure work meets quality standards.

3. Team Management: Lead and manage the project team, ensuring effective communication and collaboration.

4. Issue Resolution: Identify and address issues, devise solutions, and take appropriate actions.

5. Quality Assurance: Ensure adherence to quality standards, conduct inspections and audits.

6. Progress Monitoring: Monitor project progress, address delays and changes promptly.

7. Compliance: Ensure compliance with laws, regulations, safety, and environmental requirements.

8. Risk Management: Identify, assess, and mitigate risks.

9. Reporting: Provide regular progress reports to stakeholders.

Requirements:

1. Education: Bachelor's degree in Construction Management, Civil Engineering, or a related field.

2. Experience: Minimum 5 years in construction project management.

3. Track Record: Proven success in managing construction projects.

4. Skills:

- Excellent communication, leadership, and problem-solving skills.

- Ability to work under pressure and meet deadlines.

- Familiarity with construction software and technologies

We are seeking an experienced and skilled Carpenter to join our team. As a Carpenter, you will be responsible for constructing, installing, and repairing structures and fixtures made of wood, wood substitutes, and other materials. You will work on various projects, including building, renovating, and maintaining buildings, furniture, and other woodwork products.

Key Responsibilities:

- Construct, install, and repair structures and fixtures made of wood, wood substitutes, and other materials

- Read and interpret blueprints, diagrams, and specifications to ensure accurate measurements and construction

- Measure, cut, shape, and assemble materials using hand and power tools

- Install doors, windows, cabinets, shelving, and other fixtures

- Build and install custom furniture, trim, and molding

- Repair and maintain existing structures and fixtures

- Work with other construction professionals to ensure project completion

- Follow safety guidelines and regulations

Requirements:

- High school diploma or equivalent required; apprenticeship or vocational training in carpentry preferred

- 3+ years of experience in carpentry

- Strong understanding of construction methods, materials, and safety protocols

- Proficient in using hand and power tools

- Ability to read and interpret blueprints and diagrams

- Good communication and teamwork skills

- Physical ability to lift, carry, and maneuver heavy materials

• Position : Procurement Executive (Interior Fit-out/ Interior Design Industry) –Up to $3500
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $3500 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Implement procurement strategies, policies, and procedures.
• Identify and manage vendors, including contract development and compliance, and vendor performance
• Negotiate with suppliers on lead-time, cost and quality to obtain the maximum benefit for the company.
• Issue of Purchase Order, updating of Purchase Orders status and Project Cost updating.
• Exercises a good working knowledge of materials and sources of supply and makes purchases at prices consistent with quality and quantity requirements
• Other Ad hoc assignment by Superior.

Requirements:

• Knowledge of import and export regulations.
• Experience in vendor management and contract negotiation.
• Ability to work in a fast-paced environment and manage multiple projects simultaneously.
• Self-motivated and able to work independently with minimum supervision

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Roles & Responsibilities

1. Applicant must at least have more than 2 years of stage performing

2. Recruit performing artiste and singers when needed

3. Participate in all stage performances

4. To train & guide the stage crew to improve on their performances

5. In charge to schedule and selection of performing artiste for specfic event's performances

6. Coordinate & attend all training & rehearsal

7. Source for necessary accessories and props for all performances.

8. Singing & Dancing skill

9. To ensure all stage crew is presentable on stage

Job SCOPE:

Assist the Chef

Basic culinary skills

Willing to learn

Be independent & responsible

Ensure kitchen cleanliness, safety & compliance to food hygiene

Team player that can readily work with the whole team

REQUIREMENTS:

Seek stable & positive individuals

Possess food hygiene and safety certification

Immediate start work preferred

Roles & Responsibilities

1. Applicant must at least have 1 year or more of stage performing,

2. Recruit performing artiste and singers when needed,

3. Participate in all stage performances,

4. Assist Operation Manager to train & guide the stage crew to improve on their performances,

5. In charge to schedule and selection of performing artiste for specfic event's performances,

6. Coordinate & attend all training & rehearsal,

7. Source for necessary accessories and props for all performances,

8. Singing & Dancing skill,

9. To ensure all stage crew is presentable on stage.