Roles & Responsibilities

• Able to cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results
• Prepare various surfaces for tiling with waterproofing material and cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms
• Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break, damage tiles or disrupt the alignment
• Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about executing the job

Requirement:

• Able to work independently for standard works
• Able to work on weekends
• Strong mentality to work at night shift
• Minimum Secondary Education
• Minimum 4 Years Physical Work Experience.

Responsibilities:

• Review Jigs and fixtures designs for new projects in collaboration with production team members.
• Develop and assess Design for Assembly for new projects.
• Provide official drawings/data (for new mechanical parts) to vendors for First Article data and sample submission for approval.
• Ensure tracking of approval status for new mechanical parts/modifications from drawing issuance until full approval.
• Assist production line during trial run phase.
• Collaborate with Quality Department to address quality concerns.
• Perform other pertinent tasks as required.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• With 3 years of experience in Mechanical or similar industry.
• Proven experience in Design for Assembly, Mechanical Part Approval procedures.
• Proficiency with Excel, Powerpoint, 2D, or 3D CAD.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Lead and manage design projects from concept to completion.
• Collaborate with cross-functional teams to develop innovative design solutions.
• Create and review detailed engineering design drawings using CAD software.
• Perform design analysis and optimization to ensure product performance and reliability.
• Coordinate with suppliers and manufacturing teams to ensure smooth production processes.
• Perform additional tasks as assigned.

Requirements:

• Bachelor's Degree in Engineering or related field.
• Min of 4 years of experience in Equipment Design.
• Proficiency in 3D CAD software
• Knowledgeable with automation equipment, high-precision machine design and high-speed pick & place mechanism.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Prepare and submit tender proposals, including cost estimates, bill of quantities, and pricing schedules.
• Review and analyze project specifications and drawings to accurately determine project requirements.
• Collaborate with project teams to develop accurate and competitive tender submissions.
• Liaise with clients, consultants, and subcontractors to gather necessary information for tender preparation.
• Compile and submit quotations for projects, including all necessary materials and services.
• Review and negotiate subcontractor and supplier contracts.
• Ensure compliance with industry standards, regulations, and company policies.
• Accurately certify and validate progress claims submitted by contractors.
• Take responsibility for managing the final account.

Requirements:

• Degree or Diploma in Quantity Surveying, Construction Management, or related field.
• Minimum 5 years of experience in tendering and quantity surveying in the interior design/construction industry.
• Strong analytical and problem-solving skills.
• Excellent communication and negotiation skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Responsibilities:

• Lead and manage construction projects from inception to completion.
• Coordinate and oversee all aspects of the project, including design, planning, budgeting, scheduling, and procurement.
• Collaborate with architects, engineers, and contractors to ensure smooth project execution.
• Manage and resolve project issues and risks in a timely manner.
• Ensure compliance with building codes, regulations, and safety standards.
• Manage project budgets, cost control, and financial reporting.
• Prepare and present project reports and updates to clients and stakeholders.
• Supervise and mentor project team members.
• Ensure quality assurance and delivery of projects within budget and schedule.

Requirements:

• Bachelor's degree in Civil Engineering, Architecture, or related field.
• Minimum3-6 years of experience in project management, preferably in the construction or design industry.
• Strong leadership and communication skills.
• Excellent problem-solving and decision-making abilities.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Responsibilities:

• Review Jigs and fixtures designs for new projects in collaboration with production team members.
• Develop and assess Design for Assembly for new projects.
• Provide official drawings/data (for new mechanical parts) to vendors for First Article data and sample submission for approval.
• Ensure tracking of approval status for new mechanical parts/modifications from drawing issuance until full approval.
• Assist production line during trial run phase.
• Collaborate with Quality Department to address quality concerns.
• Perform other pertinent tasks as required.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• With 3 years of experience in Mechanical or similar industry.
• Proven experience in Design for Assembly, Mechanical Part Approval procedures.
• Proficiency with Excel, Powerpoint, 2D, or 3D CAD.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Location: Aljunied

Working Hours: 5 Days (Mon – Fri)

Salary (commensurate with experience) Up to S$3,500

Industry: Branding Design Agency

Responsibilities:

• Collaborate with Creative Team: Work closely with our creative team to conceptualize and develop 3D design concepts and space planning for retail pop-out stores, counters, and kiosks, ensuring alignment with client objectives and brand identities.
• Create Photorealistic Renderings: Develop photorealistic 3D renderings and animations for branding, packaging, product visualization, and marketing campaigns.
• Material Inspection and Follow-Up: Inspect Dry-Lay/Materials and follow up by presenting mood/material boards, developing layout plans (often using 3D software like SketchUp), and creating perspective/detailed drawings for retail spaces.
• Graphic Design: Produce graphic design artworks using Adobe Illustrator and Photoshop.
• Theme and Plan Development: Create themes and plans, including window and in-store displays, signage, and posters.
• Concept Translation: Translate conceptual ideas into visually compelling designs that capture the essence of each brand and resonate with target audiences.
• Quality Assurance: Ensure all 3D designs meet quality standards, client specifications, and project deadlines.
• Client Presentations: Present design concepts to clients with confidence and professionalism, incorporating feedback and revisions as needed.
• Stay Updated: Keep informed about the latest trends, techniques, and technologies in 3D design to continuously enhance our offerings and capabilities.

Requirements:

• Diploma and above in interior / commercial design, or related field.
• Minimum of 2 years of professional experience as a 3D Designer, preferably in a branding or advertising agency.
• Proficiency in industry-standard 3D modeling and rendering software, such as AutoCAD, 3D Max, Adobe Suit
• Proficiency in AutoCad, Adobe (CS, Photoshop, Illustrator), Corel, SketchUp, 3D Max
• Strong portfolio showcasing your creative talent, technical skills, and ability to translate concepts into visually stunning designs.
• Excellent communication and collaboration skills, with the ability to work effectively in a team environment.
• Able to work in a fast-paced environment.
• Detail-oriented mindset with a passion for delivering high-quality design solutions that exceed client expectations.
• Ability to manage multiple projects simultaneously and prioritize tasks effectively in a fast-paced environment.
• Notices and addresses details with precision and thoroughness.

To Apply >>

Please attach updated detail resume in MS WORD FORMAT (.doc file) and include the following information:

• Personal Particulars (with short residence address)

• Education

• Work experiences (period of employment & job duty) in point forms

• Reasons for leaving each employment

• Last drawn salary in each employment

• Expected salary

• Earliest work commencement date / Notice period

(We regret that only shortlisted candidates will be notified)

EA Personnel No. R1106739

Our client is a Global MNC company in the Manufacturing industry. Due to their current expansion plan, they are looking for a Senior Mechanical Design Engineer (Molding) to join their Engineering team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Responsibilities:

• Spearhead the company’s design initiatives for product and process innovation/enhancement
• Develop prototypes to validate initial concepts
• Produce detailed engineering drawings with emphasis on Geometric Dimensioning and Tolerance Analysis
• Establish testing protocols for all product designs
• Conduct Intellectual Property research to safeguard the company against potential patent violations
• Manage Projects with stringent deadlines
• All other adhoc duties as assigned

Requirements:

• Minimum Bachelor’s Degree in Mechanical Engineering or other relevant field of studies
• Minimum 5 years of relevant working experience
• Knowledgeable/Experienced in product design (plastic molded parts)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Responsibilities:

• Create detailed 2D and 3D CAD drawings using software such as AutoCAD.
• Translate sketches, specifications, and other design data into accurate CAD drawings.
• Collaborate with architects, engineers, and designers to understand project requirements.
• Ensure drawings are in compliance with industry standards and regulations.
• Make necessary revisions and modifications to drawings as required.
• Maintain and update drawing files and documentation.

Requirements:

• Degree in Building Management/Construction Management
• At least 2-3 years of experience in similar industry.
• Proficiency in AutoCAD
• Experience in LTA Projects

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Overview:

The Formwork Design Engineer is responsible for designing and detailing formwork systems for concrete structures in various construction projects. This role involves collaborating with architects, structural engineers, and construction teams to ensure formwork designs are efficient, safe, and meet all project requirements and standards.

Job Responsibilities:

• Develop detailed formwork designs and drawings for concrete structures, ensuring they are efficient and meet project specifications.
  • Use computer-aided design (CAD) software to create and modify formwork designs.
  • Ensure formwork designs comply with relevant codes, standards, and regulations.
  • Perform structural analysis and calculations to ensure the formwork can safely support the loads during the construction process.
  • Evaluate and select appropriate formwork materials and systems based on project requirements.
  • Work closely with architects, structural engineers, and construction teams to understand project requirements and constraints.
  • Coordinate with other engineers and design team members to ensure consistency and accuracy in designs.
  • Provide technical support and guidance to construction teams during the formwork installation and removal phases.
  • Prepare and maintain detailed documentation, including design calculations, drawings, and technical reports.
  • Conduct site visits to inspect formwork installations, ensuring they adhere to design specifications and safety standards.
  • Identify and address any issues or discrepancies in formwork installations.

Job Requirements:

• Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field.
  • Professional certification or licensure (e.g., PE, Chartered Engineer) is desirable.
  • Proven experience in formwork design, structural engineering, or a related role within the construction industry.
  • Willingness to be trained and use Tekla design software is a bonus
  • Proficient in using CAD software (e.g., AutoCAD, Revit, Tekla) for creating detailed formwork designs.
  • Strong understanding of structural analysis and design principles.
  • Excellent problem-solving and analytical skills.

Additional Information:

• Working Location: Senoko Rd (Sembawang)
• The role typically involves working in an office environment with occasional site visits.
• Travel to various project sites may be required.
• Standard working hours, with some flexibility depending on project deadlines

22C1322 Maxhunt Resource Pte Ltd

R23116279 Ng Shu Wang

Job Responsibilities:

- Prepare material requisition lists for job requirements.

- Plan and design electrical switchboards, consoles and control panels according to customer's requirements and company standards.

- Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

- Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

- Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

- Check and follow-up on design and shop drawings with production departments.

- Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

- Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

- Carry out other responsibilities as and when assigned by the superiors.

- Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System

Job Requirements:

- Diploma in Electrical or equivalent

- 5 years of relevant experience

- Possess relevant experience with Switchboard Design

- Able to start work immediate

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Design Manager/ Design Director (Interior Design)

Working Hours: Monday – Friday (9am – 6pm)
Location: Bendemeer
Salary: $6,000 - $8,000

Responsibilities:

• Manage a team of nine designers.
• Responsible for design and creativity on projects from concept design and space planning through to development and presentation, ensuring high quality outputs and creativity.
• Actively seek and share inspiration and reference from sources outside of the business to support creative design solutions.
• Produce concept work using hand sketches and a variety of digital and traditional media to a high standard whilst directing the work of other junior team members on the project.
• Produce and check drawing packages for schematic and detail design stages
• Assemble presentations using a variety of digital and traditional media, particularly power point.
• Attend client meetings alone or with the support of the project leader leading or contributing to client presentations.
• Competently source reference material and carry out research to ensure that materials and products are fit for purpose.
• A comprehensive knowledge of markets, our clients and their competitors.
• Establish and develop a strong working relationship with clients on allocated projects and identify project opportunities independently
• Contribute proactively to business development, pitches, proposal writing and presentations.
• Attend site visits independently and respond to any issues.
• Involve in site measurement, layout plan & selection of material used
• Leading project communication, including liaising with the design, clients, construction, supplier and contractors’ team and ensuring meetings are properly recorded.
• Prepare accurate and timely fee proposals for projects.
• Ensure successful delivery and completion of a project within agreed timelines and budgets.
• Proven knowledge of materials and their application.

Requirements:

• AutoCAD, Adobe Photoshop, Sketch Up, Microsoft Office is a must
• At least 8 year(s) of working experience in Corporate Office Interior Design
• Team leading experience

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is a Global MNC company in the Manufacturing industry. Due to their current expansion plan, they are looking for a Mechanical Design Engineer (Molding) to join their Engineering team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Responsibilities:

• Spearhead the company’s design initiatives for product and process innovation/enhancement
• Develop prototypes to validate initial concepts
• Produce detailed engineering drawings with emphasis on Geometric Dimensioning and Tolerance Analysis
• Establish testing protocols for all product designs
• Conduct Intellectual Property research to safeguard the company against potential patent violations
• Manage Projects with stringent deadlines
• All other adhoc duties as assigned

Requirements:

• Minimum Bachelor’s Degree in Mechanical Engineering or other relevant field of studies
• Minimum 2 years of relevant working experience
• Knowledgeable/Experienced in product design (plastic molded parts)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Project Director

Salary: $7,000 – 8,000

Working Location: Kranji Link

Working hours: Monday – Saturday, 8:30 to 6pm

Report to Director / Executive Director

• The project director will coordinate project management and ensure that all requirements described are developed and implemented in a timely fashion that represents the views of key Directors.
• Responsible for making sure there is sufficient and appropriate personnel with the right level of resources and other support needed to implement good quality project & services.

Responsibilities:

1. To oversee all the upcoming and existing project from tendering to handing over.
2. To liaise with clients and consultants on projects and attend meetings;
3. Identifying the need for carrying out a formal design control, verification and validation program for work established by tender or contract requirements
4. Evaluate, review and check all the details design system and coordinate with project manager and consultants in order to ensure the completeness and functionality of all the services
5. Evaluate and review the pre-contract cost estimates, cash flow projection, feasibility studies and cost analysis done by the QS team on all aspects.
6. Manage the All the work done in accordance with approved design, material used and workmanship is in compliance with contract specifications.
7. Lead & Manage Project TeamsIn delivering service standards expected by the clients & consultant
   In Utilizing material usage that are fit for project specifications
   In ensuring that project schedules are met on time
   In rectifying & resolving project site issues
   In reviewing, monitoring and continuously improving project management system, workmanship, and quality of work at site.
   
8. To actively participate in ad-hoc projects and other duties when required

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Working Location: Woodlands
Working Hours: Monday - Friday, 8.30am - 6pm

Job Description (JD)

• Dealing with vendor on website maintenance, products catalogue details information sharing
• Handle E-commerce portfolio, liaising with different platform ( lazada, shopee, Amazon etc ) for listing up the products
• Source and deal with Expo / Convention Hall / Events company to run roadshow to promote the products
• Hands-on to run roadshow on the ground
• Manage the sales details from various platforms.
• Conducts market research and analyzes content performance to optimize strategies.
• Collaborates with cross-functional teams (especially content team) to integrate content into marketing campaigns effectively.

Requirement

• Minimum Diploma/Degree

Er Ser Leong | Registration No: R23111884

BGC Group Pte Ltd | EA No: 05C3053

Responsibilities:

• Involve in development and maintenance of software for equipments.
• Design and develop software for automated semi-conductor process equipment.
• Involve in maintenance, review, and improvement
• Assist in defining the architecture of new designs and produce technical documents
• Engage with customers to understand requirements and create specifications.

Requirements:

• Min Diploma in Electrical/Electronic Engineering, Computer Science,or it's equivalent
• At least one year related working experience
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected]

EA License No: 13C6305

Reg. No.: R1770654

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Benefits Summary:

• Company is in Semiconductor industry
• Permanent role
• Basic from $6,000 -$8,500
• Monday - Friday, 8.30am-5.30pm
• Location: Ang Mo Kio

Responsibilities:

• Lead a dynamic team of software engineers in crafting real-time software and automation control systems for the Company’s complete semiconductor equipment portfolio.
• Create and deploy software methodologies, documentation systems, and tools to bolster both ongoing software maintenance and new project development.
• Establish standardized software architecture and protocols as benchmarks for design, coding, testing, and deployment procedures.
• Pioneer the exploration, development, and integration of next-generation software engineering technologies.
• Provide technical assistance to diverse engineering departments in troubleshooting and resolving critical field issues.

Additional Information:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or its equivalent
• More than 5 years in a managerial capacity overseeing software development and automation control in a related industry
• Experienced in programming on Windows (XP and above) environment.
• Highly versatile in VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*
We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

TEH CHEE HONG | EA Personnel No.: R24121499

Job Description (JD)

-Dealing with vendor on website maintenance, products catalogue details information sharing

-handle E-commerce portfolio, liaising with different platform ( lazada, shopee, Amazon etc ) for listing up the products

-source and deal with Expo / Convention Hall / Events company to run roadshow to promote the products

-hands-on to run roadshow on the ground

-manage the sales details from various platforms.

- Conducts market research and analyzes content performance to optimize strategies.

- Collaborates with cross-functional teams ( especially content team ) to integrate content into marketing campaigns effectively.

Specific Requirements

Years of Experience: 5-6 years in marketing or content creation.

Degree Major: Bachelor's degree in Marketing, Communications, Journalism, or related field. Diploma with relevant working experience can be considered.

Looking someone :

-can manage vendors / resource to source partner to run mkt campaign ( offline )

-can craft and draft the artworks to be published

-independent

-good in gathering sales from various data point and present to stakeholde

-hands-on personnel to run mkt event and share about the products

-can source/ liaise with manpower agency for manpower needs

-someone Dip/Degree with 3 -5 years experience will be ideal.

Senior Designer

• Working Days: Monday – Friday (7:30am - 4:30pm / 8:30am-5:30pm / 9:30am-6:30pm)
• Working Location: Tai Seng
• Salary: $2500 - $4000 + AWS + Performance Bonus

Requirements:

• Diploma or Degree in Fashion Design or related discipline.
• At least 3 years of relevant experience in fashion design.
• Knowledge in textile, garment construction, design and development.
• Proficiency in Photoshop and Illustrator.
• Experience in manage multiple projects and meeting tight datelines.

Responsibilities:

• Mood boards, design development and presentation.
• Design and fabric research, sourcing, preparing prototype and prototype development.
• Create technical drawings for sampling and presentation.
• Liaise with relevant parties on development and construction.
• Manage fabric and trims library.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

about the company

Our client is a leading global real estate investment manager with a strong Asia foothold. Data Centre is one of the key areas of their business. Currently their Data Centre business has a presence in 8 countries over 27 locations.

They are looking for a Manager, Design & Development. This role will report to Director, Design & Development. The ideal candidate should be a Data Centre Electrical/ Mechanical Subject Matter Expect (SME). He/She will be responsible for overseeing projects development, reviewing solutions, and Built-To-Suit applications for Data Centres. This incumbent will be part of the solutions team to support sales and consult with customers in the Global Data Centre business.

about the job

• Supervise, assist, and facilitate collaboration among regional development teams, consultants, and internal departments to grasp project requirements, scope, and needs, ensuring successful product delivery.
• Examine necessary development and design documentation to confirm their alignment with project requirements, ensuring they offer a strong value proposition for the company.
• Provide SME engineering support to the DC team during project life cycle in terms of process, tools required, procedures, regulatory compliance, Dos and Don’ts, technical interpretations and support, and ensure quality
• In a consultative manner, work with and support the Sales team in technical sales and solutions in all markets including:

->Direct prospect engagements, including leading building and site

tours, sales calls and proposal generation, and pricing and

contract negotiations

-> Evaluate customer needs, and then architect and present a

preliminary solution together with other SMEs in the team

-> Generate sales leads through professional contacts and

networking

• Participate in forecasting, pipeline, market analysis and evaluate trends in prospect, customer and target tenant base
• Collaborate with the professional community by participating in technical forums and delivering presentations at industry events.

skills & experience required

• Bachelor’s Degree or equivalent in Electrical or Mechanical Engineering.
• At least 6 to 8 years’ experience in the mechanical or electrical engineering field, of which 4 years in designing mechanical or electrical systems for critical facilities such as data centres
• In-depth understanding of systems design
• Understanding on best practices and standards in systems design, installation and operation requirement
• Technical savvy with deep experience in Data Centre, Cloud, Hybrid Cloud and Telecommunications and Networking
• Expert application software skills in MS Projects, MS Word, MS Excel, Visio, AutoCAD
• Willingness for short duration overseas travel

If you are interested in the position, kindly send your CVs to wenyu.jiang (@) randstad.com.sg.

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted.

(EA: 94C3609 / Reg: R1332558)

Responsibilities:

• Member of Project Team for Supervisory Control & Data Acquisition (SCADA), Energy Monitoring Systems (EMS) or Distribution Management Systems (DMS) Systems Projects
• Responsible for software configuration using IBM Rational Clear Case and GIT version control
• Set-up and installation of UNIX/LINUX/WINDOWS servers, workstations, hardware, and networks (routers, switches, IP addresses)
• Assist in the preparation of tender which includes but not limited to: preparation of technical documents, setting up of demonstration servers and laptops
• Support preparation of documents which includes instrumentation work design, hardware and software design specifications
• Degree in Computer Science/Computer Engineering
• Knowledge in Relational DataBase Management System (RDBMS) and SQL commands; (example Oracle, MySQL, MSSQL, etc)

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Design and draft of Electrical Single Line / Panel Diagram according to customer technical specification
• Maintain, update and correct drawings as needed, and ensure its accuracy and completeness
• Collaborate with project teams to facilitate drawing preparation
• Respond promptly to inquiries and request relating to the drawings

Requirements:

· Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University;

· Knowledge in Autocad and Eplan;

· Possession of team spirit, good communication and organising skills;

· A good team player with strong collaboration and stakeholders’ management skills;

· Excellent organizing skills, spoken and written communication skills.

· Our benefits and compensation for permanent position are as follows:

·

· Salary for experience candidates will be considered based on the years of experience and our internal salary structure

·

· 1 month AWS

· Variable Bonus ranging up to 6 months depending on individual and company performance

· Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

· Working days: Monday to Friday (1 day work from home per week)

· Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

· 18 days up to 21 days for executive (Engineer and above)

· Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

· Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

· Term Life

· Personal Accident

· Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

· Flex Dollars of $500 per financial year

· Free annual year-end Health Check-Up

· Monthly Birthday Party Celebration

· Monthly Sports Activities

· New Born Gift

· CSR Initiatives

· Department Bonding Activities

· Biennial team building and staff appreciation dinner

· Gym Corner for employees to exercise

·

· Good Pay + Good allowance + Good Bonus

· Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

· Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Review Jigs and fixtures designs for new projects in collaboration with production team members.
• Develop and assess Design for Assembly for new projects.
• Provide official drawings/data (for new mechanical parts) to vendors for First Article data and sample submission for approval.
• Ensure tracking of approval status for new mechanical parts/modifications from drawing issuance until full approval.
• Assist production line during trial run phase.
• Collaborate with Quality Department to address quality concerns.
• Perform other pertinent tasks as required.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• With 3 years of experience in Mechanical or similar industry.
• Proven experience in Design for Assembly, Mechanical Part Approval procedures.
• Proficiency with Excel, Powerpoint, 2D, or 3D CAD.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Design and develop analog integrated circuits (ICs) for power management applications.
• Work closely with senior designers to understand design requirements and specifications.
• Perform circuit simulations and analyses to optimize IC performance and functionality.
• Create and modify schematic designs for analog ICs.
• Collaborate with layout designers to ensure efficient physical implementation of the ICs.
• Conduct thorough testing and characterization of IC prototypes.
• Participate in design reviews and provide technical recommendations.
• Stay updated with the latest industry trends and advancements in analog IC design.
• Ensure compliance with quality standards and project deadlines.

Requirements:

• Degree in Electrical Engineering or equivalent.
• At least 2 years of working experience in IC design and power management background.
• Strong knowledge of analog IC design principles and techniques.
• Proficiency and knowledge in tools such as Matlab, CMOS, Spectre and BiCMOS.

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Duties & Responsibilities:

RF/Analog/PMIC/Clock management/Mixed Signal Circuit Design, such as PA/LNA/Mixer/VCO/Filter/VGA/LDO/ Buck/ADC/DAC/PLL, develop and testing of connectivity IC for short range RF wireless applications such as Bluetooh, WLAN, Zigbee, NFC, GNSS etc.

Skills/Experience:

· Minimum Master Degree in Microelectronics/Digital Communication/EE

· RFIC design experience in RF/Analog/Mixed signal circuits using CMOS/SiGe/GaAs process

· Both junior and senior position are opened for application

· Have knowledge in RF/Analog design and verification flow using CAD simulation and verification tools from Cadence, Keysight (Formerly Agilent) and Mentor Graphics etc

· Hands-on experience in the design of RF/Analog/Mix signal blocks such as (but not limited to) PA/LNA/Mixer/VCO/ Filter/VGA/PLL/ADDA, PMU etc

· In depth knowledge and design experience in mixed-signal systems and circuit design/verification of PLL/ frequency synthesizer will be a plus

· Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance

· Some experience in script writing such as pearl, skill, matlab etc will be advantageous

· Highly motivated, able to work independently and demonstrates strong analytical and communication skills

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.