Working location : Jurong Island

Job Description:

• Design review with other disciplines before submission for bidding.
• Client ITB documents and prepares clarifications and deviation list.
• Preparation of Piping Design calculations such as Piping Sizing, Pipe thickness, Pressure Drop etc.
• Preparing Pipeline list, Valve list, Equipment list, Instrument list, Specialty component list and initial MTO (For alloy steel), Final MTO (for metallic/Non-metallic piping, Valves/Specialty components).
• Detailed designing of piping systems including Hydro test, cleaning and Flushing concepts. Prepare piping specification (Piping class manual), standards and design instructions.
• Checking of all the output documents with respect of Work instructions and checklists for ensuring quality.
• Knowledge on Material selection and specifications as per international codes and standards (ASTM, ANSI, API).
• Basic knowledge of pipe stress analyses.
• Check and finalise isometrics and Supporting Drawings for erection purposes and release.
• Prepare sub-contractor construction scope of work for EPC/EPCM projects.
• Continuous site support if there arise any Piping, E&I, civil,construction and Installation enquiry.
• Other ad-hoc duties deemed fit and necessary by the company.

Requirements:

• Minimum of Degree in engineering disciplines
• Minimum 5 yearsof experience in the design and engineering field.
• Motivated, responsible with positive attitude and able to work under pressure.
• Willing to working in Construction site (Jurong Island).
• Knowledge of AutoCAD and Autodesk Revit is required.
• Knowledge of BIM Model will be an added advantage.

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

► Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

• Conduct equipment design and development in accordance with customer requirements and internal specifications.
• Serve as the project lead, planning, organizing, and coordinating project meetings to review designs and ensure timelines are met.
• Maintain and manage documentation related to R&D activities, adhering to required standards.
• Track and ensure the Bill of Materials (BOM) is accurate and up to date.
• Create detailed 2D and 3D technical drawings.
• Initiate Engineering Change Notices (ECN) for design and drawing updates, and oversee the approval process and ECN workflow.
• Provide technical support for process and production teams, supply chain, and QA, including reviewing and troubleshooting designs and drawings.

Requirements:

• A Bachelor’s or Master’s degree in Mechanical Engineering or a related discipline.
• A minimum of 4 years of relevant experience in semiconductor or automation equipment design.
• Proficiency in Microsoft Office applications, including Word, Excel, and PowerPoint.
• A strong understanding of mechanical engineering principles and techniques.
• Extensive experience in mechanical design using SolidWorks is preferred. Experience with Autodesk/AutoCAD software will be an added advantage.
• Comprehensive knowledge and experience in material properties.
• Willingness to travel for overseas projects as required.x

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.
By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Duties & Responsibilities

• Design, develop and verify new products to meet product and process development requirements.
• Ownership of analog circuits used in SerDes, including evaluation of different circuit topologies for specific product requirements (e.g., Rx, CDR, Tx, bias generator, clock generation and distribution, etc.).
• Get along with multi-functional teams to define requirements/specs (e.g., modeling, package, board, DFT, ESD, etc.)
• Provide technical support to manufacturing during pilot, runs/tests.
• Craft block-level specifications based on link-budget, behavioral modeling, and transistor-level feasibility.
• Work closely with mask design to implement layout view of designs.
• Hold design reviews of blocks with peers/management to show design meets spec targets and requirements.
• Participate in projects and other adhoc duties assigned

Skills/Experience:

• Master or PhD in Electrical Engineering.
• Deep knowledge in high-speed SerDes protocols (e.g., PCIe, USB, SATA, etc.).
• Strong knowledge of analog CMOS designs and topologies.
• Deep experience with Tx & Rx equalization techniques and circuits.
• Deep experience in analyzing link jitter budget for high-speed serial links and creating block level requirements.
• Strong knowledge of different CDR architectures.
• Experience in lab testing of high-speed serial links and defining equipment needs

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Design Verification Engineer

Experience : 6+ Years

Salary Range :SGD 7000-10000

Skills Required:

FPGA SoC Verification Skills

ASIC SoC Verification Skills

System Verilog and UVM Skills

Automation Skills .

IP Verification Skills

Low power UPF based verification skills

Technical Expertise

Languages :Verilog, System Verilog, C, C++.

Verification Methodologies:UVM, OVM.

Scripting Languages:Perl,C-shell.

Simulators:Cadence IUS, Synopsys VCS, Verdi.

Protocols:PCIe,AGPT,CFDM,SPI,ISO7816,

DDR3, LPDDR2, GPIO, AXI, AHB, APB, JTAG, WDT, GPT.

Job Description:

• Able to assist in Costing
• Proficient in Autocad sanitary plumbing
• Candidate is proficient in Building Information Modeling (BIM)
• Knowledge in AUTOCAD (2D & 3D) & BIM drawing
• Plan, manage and execute design work, typically from concept through to completion and manage design changes during construction stages
• Plan all drawing request to meet the submission deadline
• On time delivery drawings, correct and accurate drawings
• Work closely with assigned PM on Autocad and Drawing Status reporting
• To attend site walk as and when required by the Engineers and Managers
• Ensure compliance with the relevant design codes and specifications

Requirements:

• Minimum 2-3 years relevant experience
• Positive working attitude, self-motivated and responsible
• Able to start work immediately
• Fresh graduates from ITE or Polytechnic are welcome to apply

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architectural
• Minimum 10 years of relevant experience in LTA project or Building project.

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:

Singapore

• Prepare and modify precast schematic, detailed, and production drawings for precast concrete components, steel molds, and reinforced concrete structures.
• Develop solutions for technical and design challenges in accordance with Singapore’s established standards.
• Create 2D and 3D presentations and design drawings.
• Compile data and conduct basic design computations.
• Engage in client communication, consult with authorities, coordinate with consultants and subcontractors, and attend design and construction meetings.
• May mentor and oversee the work of less experienced colleagues.
• Perform any additional tasks and duties as assigned by management or the direct supervisor.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Oversee the entire ICA design process, from concept to implementation, ensuring project is delivered on
• time, within specifications and meeting industrial standards.
• Lead and mentor a team of ICA engineers and ensuring the quality in design work.
• Oversee the development of control logic, CMS programming, HMI interfaces, and Sub-Control systems, ensuring seamless communication and synchronisation of control components.
• Oversee the selection of instrumentation, sensors, and transmitters for accurate data acquisition, measurement, and feedback control.
• Oversee the configuration and deployment of the Control Monitoring System for seamless process control and integration of subsystems.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimise the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Coordinate validation activities, including factory acceptance testing (FAT) and site acceptance testing (SAT), to ensure systems meet performance criteria.
• Develop RFQ and collaborate with suppliers and vendors to source components, equipment, and systems required for ICA and ensuring they meet quality and performance standards.
• Oversee testing and commissioning of the CMS, coordinating with process team to ensure system operate as intended.
• Ensure clear and consistent communication with project client and consultant throughout the project, providing updates, addressing concerns and managing expectations.
• Manage ICA design budgets, including cost estimation, resource allocation, and cost control.

Requirements

• Min. of Bachelor Degree in Electrical, Process Control & Instrumentation, Automation Engineering or related engineering discipline.
• 15 years of relevant ICA engineering experience in the planning, design, SAT/FAT and construction of major waste to energy, water, wastewater, process plant projects or similar major industrial projects. The Design Lead has robust experience in managing a team of suitably experienced Design Engineers and Technicians and interfacing with Client, Suppliers and Subcontractors.
• Familiar with code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• Proficiency in programming languages for PLCs (e.g., ladder logic, structured text) and HMI/DCS systems is advantageous.
• In-depth knowledge of control system architectures, such as DCS and PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Experience with functional safety standards (e.g., IEC 61508, IEC 61511) and cybersecurity best practices.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong leadership and communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater and WTE related control system.
• Relevant experience in design and site work for water, wastewater treatment and WTE works.
• Highly motivated and ability to work independently with minimal supervision.
• full time work at Tuas project site

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

We are a leading provider of arts education, offering visual arts classes, holiday art camps, and events for children and adults worldwide.

With a mission to inspire creativity and self-expression, we create educationally rich environments where imagination thrives.

Join our team and help shape the future of art education in Singapore!

About the Role:
As an Art Studio Manager, you will oversee the daily operations of three studios located at Great World, Tanglin Mall, and Jurong East. This dynamic role requires you to manage studio performance, ensure operational excellence, and nurture customer relationships. Your responsibilities include:

• Overseeing daily operations and managing team performance across all studios.
• Scheduling weekly team shifts and facilitating in-house training sessions.
• Managing customer accounts, addressing inquiries, and following up on leads.
• Monitoring and restocking studio resources to ensure smooth operations.
• Ensuring studios are clean, organized, and safe.
• Conducting weekly team meetings to align on goals and updates.
• Leading hiring processes for new teachers and staff.

This is a 5½-day workweek role. Flexibility is required to travel to all three locations.

About You:
We’re looking for a motivated and results-driven individual with a passion for arts education and team leadership. Ideal candidates will have:

• Proven customer support and sales experience.
• At least 1 year of supervisory experience.
• A minimum of 1 year of experience working with children.
• Strong organizational skills and attention to detail.
• Self-motivation and a results-oriented mindset.

What We Offer:

• A chance to lead and inspire a talented team.
• Opportunities for professional growth in a creative environment.
• The satisfaction of making a meaningful impact on students’ lives.

Next Steps:
Ready to take the lead?

Apply directly via the website or send your resume to [email protected].

We look forward to welcoming you to our creative community!

EA Registration No.: R23111820 (Ben Chang)
EA Licence No.: 22C1307 (First Konnection Pte. Ltd.)

Responsibilities:

• Coordinate C&S designs and ensure compliance with project specifications and local regulations.
• Collaborate with architects, engineers, and contractors to ensure alignment between C&S designs and other disciplines.
• Review and provide input on civil and structural design drawings and documentation.
• Resolve design issues during construction and provide technical support to the site team.
• Ensure the integration of C&S designs with the architectural and M&E (mechanical & electrical) systems.
• Conduct design coordination meetings with consultants and project stakeholders.
• Monitor design progress to ensure timely delivery of drawings and documents for construction stages.
• Ensure quality control and adherence to safety standards in civil and structural design implementations.
• Prepare reports and updates on C&S design progress for project management.

Requirements:

• Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field.
• Over 5 years of experience in civil and structural design coordination, preferably on large-scale construction projects.
• Experience in working with multidisciplinary teams and coordinating between design and construction teams.

Duties & Responsibilities

RF/Analog/Mixed Signal Design, Development and Evaluation of connectivity IC for short range RF wireless applications such as Bluetooth, WLAN, Zigbee, NFC, GNSS, IoT etc

Skills/Experience

• PhD in Microelectronics/Digital Communication/EE
• RFIC design experience in RF/Analog/Mixed signal circuits using CMOS/SiGe/GaAs process
• Must have strong knowledge in RF/Analog design and verification flow using CAD simulation and verification tools from Cadence, Keysight (Formerly Agilent) and Mentor Graphics etc
• Hands-on experience in the design of RF/Analog/Mix signal blocks such as (but not limited to) PA/ LNA/Mixer/VCO/Filter/VGA/PLL/ADDA, PMU etc
• In depth knowledge and design experience in mixed-signal systems and circuit design/verification of PLL/frequency synthesizer will be a plus
• Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance
• Some experience in script writing such as pearl, skill, matlab etc will be advantageous
• Highly motivated, able to work independently and demonstrates strong analytical and communication skills
• Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

A semiconductor and Automation company.

• Working days: 5 days
• Location: AMK
• Benefits: AWS, Bonus, Annual leave etc.

Responsibilities

• Conduct equipment Design & Development
• Responsible for equipment specifications & buyoffs
• Able to keep to project schedule and resolve design issues in a timely
  manner.
• Generate 2D/3D drawings in details.
• Participate actively in assembly, installation, operation and troubleshooting of equipment.
• Support service team at customer's site in equipment maintenance & training.

Requirements

• Degree in Mechanical Engineering
• Minimum 4 years of relevant experience in semiconductor or automation equipment design
• Proficient with 2D/3D CAD software (preferably SolidWorks)
• Able to travel overseas within short notice

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Print Art Director | 5 Days | ATL/BTL | Advertising Firm | Raeburn Park

Working days & hours: 5 days, Monday - Friday
Location: Raeburn Park, Singapore (Nearest MRT: Outram Park / Harbourfront)

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant