Duties & Responsibilities

1. Ensure efficient and effective management of design activities on tenders and projects to ensure that all design requirements of the contract are fulfilled
2. Ensure compliance with legal and other requirements, including standards and codes of practice, relating to the design
3. To oversee and supervise existing design team
4. Ensure design process and submissions comply with statutory regulations and requirements
5. Responsible to provide a fully functional structural system, analysis and calculations to fulfil adequate structural integrity and accuracy of the design
6. Must be able to lead, manage and check all kinds of design drawings by members
7. Coordination with relevant departments during the Design stage
8. Ensure that all technical/detailed drawings are compliant with the relevant codes and/or regulatory requirements
9. Ensure that all drawings must be done with constructability to site requirements, be practical, easy to understand, able to meet clients expectations and good profitability for the Company
10. To provide evaluation/findings and project results to HQ Tokyo in Japan on a frequent basis

Requirements:

1. Degree/Masters in Architecture/Engineering or equivalent
2. Minimum 12 years of working experience in the related field
3. Proficient in Software such as AutoCAD, Revit, etc.
4. Able to lead a team
5. Fluency in spoken and written Japanese is necessary as the incumbent will be required to communicate and collaborate with counterparts in Japan, Tokyo Head Office such as monthly progress reports
6. Ability to prioritize tasks well and able to work independently
7. Required to be resourceful, pay attention to details and has good communication skills

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

A Day in the Life:

• Manage the day-to-day operations of Kingsmen Exhibits Design Studio (KE Studio) in Singapore
• Lead and manage a team of designers of various disciplines on their day to day tasks
• Seek and procure new Key Accounts for KE studios as well as for Kingsmen Exhibits and the Kingsmen Group
• Work in close collaboration with the Account, Project and Sales Directors and teams to secure new accounts and projects
• Lead in pitching for projects and potential accounts in Singapore and any other Kingsmen office when required, including overseeing the progress through the various stages
• Increase the success rate of design pitches and tender submissions
• Expand KE’s various creative services at the highest level and on a wider geographical spectrum
• Lead and mentor all designers under your charge, improve and better their skills and the level of their design outputs and qualities
• Expand the scope and capabilities of the design manager in KE Studios
• Improve the work processes and efficiencies of KE Studios
• Work in tandem with the Creative Directors of Kingsmen Design Studios on improvements of the administrative procedures and policies
• Perform any other adhoc duties

Conceptualize, develop, integrate.

We are seeking a Creative Developer to join our KR+D studio team to be our internal

technology expert, assisting the team in producing and delivering ground-breaking

experiences powered by creative technology.

Our ideal candidate is a team player who can complement our current team members and

bring expertise in back-end development, hardware, and front-end development.

He or she will be responsible for assisting the digital studio manager in solution architecture,

research and development, conceptualization, and production.

A Day in the Life:

• Develop and maintain back-end systems using scripting languages such as Python,

C++, and JavaScript

• Design and implement databases using SQL

• Manage and configure infrastructure

• Develop and maintain hardware systems such as audio-visual, lighting, electronic,

and mechanical

• Collaborate with team members to design and implement front-end web applications

using HTML, JavaScript, CSS, and WebGL

• Write clean, efficient, and well-documented code

• Troubleshoot and debug code as needed

What We Are Looking For:

• Bachelor’s degree in computer science or related field.

• Solid competences with scripting languages such as Python, C++.

• Database design and implementation skills using SQL.

• Experience with front-end web development (HTML, JavaScript, CSS, WebGL).

• Able to setup and manage basic cloud or local infrastructure.

• Experience with hardware (audio-visual, lighting, electronics, mechanical…) is a plus.

• Good ability to work and communicate collaboratively in a team environment.

• Excellent organizational and problem-solving skills.

• Attention to detail and ability to write clean, efficient, and well-documented code.

• Curious and open-minded. Strong willingness and ability to acquire new skills.

• Attention to detail and ability to write clean, efficient, and well-documented code.

• Bonus points if you have a passion for generative AI and have been experimenting

with LLMs and / or Stable Diffusion fine-tuning.

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Design Project Manager - Bringing Creativity to Life with Efficiency

We are seeking a passionate and experienced Design Project Manager to join our team and lead the successful execution of exciting design projects from inception to completion. You will be responsible for overseeing all aspects of the project, from understanding client needs to managing delivery within budget and timeframe.

A Day in the Life:

• Client Relationship Management:

1. Collaborate with clients to clearly define their design aspirations and translate them into a formal design brief.
2. Facilitate seamless communication between the client and internal design team, ensuring client expectations are met and exceeded.
3. Proactively manage client expectations and navigate through any changes or challenges efficiently.

• Project Planning & Execution:

1. Develop comprehensive project plans using MS Project or similar project management software, outlining key milestones, timelines, and resource allocation.
2. Conduct regular meetings with client and internal teams to ensure clear communication, address design queries, and maintain project momentum.
3. Coordinate effectively with internal designers, landlords, architects, engineers, and other stakeholders involved in the project.

• Procurement & Tendering:

1. Identify and recommend qualified consultants to join the project team through a defined RFP process.
2. Assist the client in the tendering process, responding to technical queries, and clarifying project requirements.
3. Evaluate tender submissions, providing well-informed recommendations to the client for informed decision-making.

• Construction & Handover:

1. Facilitate regular stakeholder meetings throughout the construction phase, ensuring open communication and alignment.
2. Document meeting minutes for future reference and action tracking.
3. Manage client change requests, translating them into clear instructions for the project team.
4. Conduct regular site visits to monitor progress, oversee quality control, and address any logistical concerns.
5. Manage testing and commissioning procedures for project readiness.
6. Coordinate final inspections with landlord, consultants and contractors to ensure project compliance.
7. Prepare punch-lists and diligently follow up with contractors to rectify deficiencies.
8. Manage project close-out, including final accounts, handover documentation (as-built drawings, O&M manuals), and training sessions.
9. Oversee reinstatement and move management activities, ensuring a smooth transition to project completion.

What We Are Looking For:

• Minimum of 5 years of experience managing design projects in the Retail/Corporate industry. Junior candidates with demonstrably strong skills and relevant experience in design management may be considered.
• Proven track record of successfully delivering complex design projects on time and within budget.
• Excellent communication, interpersonal, and negotiation skills in both written and verbal formats.
• Strong organizational and time management abilities.
• Proven ability to prioritize tasks, manage multiple projects simultaneously, and adapt to changing circumstances while maintaining deadlines.
• Proficiency in design visualization software (e.g., AutoCAD, Revit), project management software (e.g., MS Project, Primavera), and communication tools (e.g., Microsoft Office Suite). Knowledge of BIM (Building Information Modelling) systems a plus.
• Experience with design procurement and tendering processes.
• Keen understanding of design constructability, able to identify potential constructability issues early in the design process and collaborate with designers to find solutions. Experience working with contractors and understanding how design decisions impact buildability and cost.
• Working knowledge of construction methods, materials, and regulations relevant to the industry. Ability to oversee construction activities, identify potential quality issues, and implement corrective actions promptly.
• PMP certification and/or LEED accreditation highly preferred. Demonstrates commitment to professional development and best practices in project management and sustainability.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Supervior and Chinese Language Teacher

Chinese Language And Art School Pte. Ltd.Jurong,Bishan, West Coast, East Coast, Bukit Timah and Central RegionTeaching -

Primary & Secondary (Education & Training)

Full timeSGD 7800 - 9000

We have 7 branches island wide in Singapore and gained a good reputation in Chinese Language tuition industry. If you were a patient and responsible person with experience and passion in teaching, you are the one we are looking for.

The main requirements for this role are followings.

1.Familiar with local Chinese Language syllabus and experienced on teaching Chinese Language cross levels from Primary 1 to Secondary 4.

2.Be capable of writing and designing Chinese Language teaching materials.

3.With good communication skills to handle parent's enquiry and feedback.

4.Be able to conduct presentation(s) in Seminars/workshops/Parent-teacher meeting

5.Good commitment on assigned job and be accountable to student'slearning outcome

6.Being passionate on teaching and supportive on team work

华艺书院成立于2003年,目前在全岛有七家分校区，专注于本地中、小学华文补习与辅导。我们的班级设置从学前到中学四年级，在小六会考和O水准会考的备考辅导方面成绩斐然。我们拥有一支优秀而专业的教师团队，现由于校区拓展计划，需要招纳多名优秀的教师加入华艺团队。如果您是一位有经验的、对教学充满热忱、富于耐心和爱心，又具有责任感和团队合作精神的教师，那您，就是我们要寻找的人！欢迎加入，待遇从优！

岗位职责和要求概述：

1.熟悉本地教育系统，能教授中、小学华文辅导课程；

2.了解本地学校华文教材，有能力修订和补充华文教材；

3.具有良好的语言沟通能力，和学生、家长建立良好的关系；

4.工作态度踏实认真，对本职工作有很强的责任感；

5.适应能力强，可以很对融入团队并配合工作；

6.工作积极主动，有很强的市场开拓能力

We are looking for passionate interior designers to join our elite team in converting spaces into functional design. You will have the opportunities to collaborate with our experienced designers who have the track records in creating world-class designs for our delightful clients.

A Day in the Life

• Responsible for timely delivery of services and solutions with professionalism and quality at all times
• Work with lead designers and design teams in supporting design implementation
• Transform creative ideas into functional design concept based on given briefs and ensure that it is in line with clients’ objectives
• Provide space planning and design conceptualisation
• Liaise with clients on quotation and design
• Prepare layout plans, perspective drawings, elevation plans and dimensional drawings
• Present design to client for approval
• Prepare design documentations and material selections
• Work closely with project team, suppliers, sub-contractors and clients during construction/implementation phase
• Perform other ad-hoc duties as required

What We are Looking For

• Diploma/Degree in Interior Design or Architecture
• 3 to 5 years of working experience in Retail and Commercial interior design environment
• Have a strong design sensibility and the technical ability to develop a project from concept to execution
• Possess excellent technical design skills for fixtures with an eye for details
• Proficient in key design tools such as AutoCad, Sketchup, Vectorworks,3D Studio Max, Illustrator, VRay and Photoshop
• Hands-on experience in producing detail drawing and 3D modeling
• Demonstrate a good knowledge of architectural production standards, detailing, building materials, building codes and construction
• Good knowledge space planning & technical design from approved design schematic.
• Creative, resourceful and demonstrate out-of-box thinking
• Team player with a positive attitude as well as the ability to work independently
• Excellent presentation skill as well as verbal and written communication skills

Key Responsibilities

• Required to manage and operate (hands-on) systems (server & storage) used in the University. Familiar with Microsoft Windows Server, SQL Databases, Linux, Cohesity Backup System, Office365, Microsoft HyperV, VMware/Netapp storage, Storage Spaces Direct, Hitachi (HCP), McAfee and Azure Cloud Platform. A strong knowledge on Microsoft Active Directory Architecture, PowerShell, Group Policies and Active Directory Federation Service is required.
• Required to provide Systems administration of Active Directory, Multi-Factor Authentication platform such as Okta, Antivirus and others.
• Required to provide Management systems availability statistics and patching reports, IT DR support and IT support for teaching-learning.
• Required to perform Systems hardening, Systems patching, Systems onboarding and decommissioning and other Systems related support services.
• Work with users to identify, understand requirements and develop deployment plans, assist with planning, developing, implementing and managing all system assets deployed in the University.
• Participate in process improvements such as operational efficiency of Systems Operations to provide prompt and effective support to existing systems.
• Rotational on-call duty along with team members and after office hours support.

Requirements

• Degree/Diploma in Computer Science or equivalent with at least 5 years of relevant working experience in design, configuration and management of Windows and Linux Infrastructure.
• Strong technical competencies and analytical mind, with specialized certifications such as MCSE, RHCE, CDCP, CCNA, ITIL, etc. would be preferred.
• Good working knowledge of IT governance, systems, security and system technologies and able to work with cross-functional departments.
• Excellent written, communication and interpersonal skills.
• Other traits include positive attitude, self-motivated, customer service oriented and a team player.

Only shortlisted candidate will be notified.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628