Mechanical Design and System Integration: Lead the mechanical design of UPW and

wastewater treatment systems, including the selection and sizing of equipment such as

process vessels, pumps, compressors, heat exchangers, dewatering devices, and other

mechanical components. Ensure seamless integration of these components into the overall

treatment system.

ØEquipment Specification and Procurement: Prepare technical specifications for mechanical

equipment and work with vendors to procure the required components. Evaluate equipment

proposals and make recommendations based on technical and budgetary considerations.

ØProject Planning and Execution: Collaborate with project managers and other engineering

disciplines to plan and execute UPW and wastewater treatment projects. Participate in project

meetings, design reviews, and progress assessments to ensure project objectives are met.

ØMechanical Engineering Analysis: Perform engineering calculations, simulations, and

modeling to assess the performance and reliability of mechanical systems. Address technical

challenges and propose solutions to optimize system performance.

ØQuality Control and Compliance: Ensure that all mechanical designs and installations comply

with applicable codes, standards, and industry best practices. Conduct quality control reviews

to verify design integrity and safety.

Ø Cost Estimation and Budget Management: Collaborate with the project team to prepare cost

estimates for mechanical components and equipment. Identify cost-saving opportunities

where applicable.

Full Time Position Only.

Responsibilities

1. Demonstrate proficiency in various art techniques, mediums, and styles, and effectively teach students how to use them to express their ideas and emotions.
2. Provide guidance and support to students in developing their artistic skills, including drawing, painting, sculpting, and other art forms.
3. Create a positive and inspiring classroom environment that encourages experimentation, self-expression, and collaboration among students.
4. Evaluate and provide constructive feedback on students' artwork, helping them identify areas of improvement and celebrating their achievements.
5. Ensure a safe and orderly art classroom environment, following appropriate safety guidelines and procedures for handling art materials and equipment.

Requirements

1. Demonstrate proficiency in various art techniques, mediums, and styles.
2. Previous experience teaching art to students of various age groups and skill levels.
3. Passion for art education and a commitment to fostering creativity and artistic growth in students.
4. Enthusiastic individual that has initiative, high adaptability
5. Strong communication and interpersonal skills, with the ability to connect with students, parents, and colleagues effectively.
6. Maintain tidiness and cleanliness of studio.
7. Knowledge of safety protocols and procedures for handling art materials and equipment.
8. Able to converse in English and/or Mandarin (as will need to liaise with student and/or parents who speaks in mandarin)

Design Project Manager - Bringing Creativity to Life with Efficiency

We are seeking a passionate and experienced Design Project Manager to join our team and lead the successful execution of exciting design projects from inception to completion. You will be responsible for overseeing all aspects of the project, from understanding client needs to managing delivery within budget and timeframe.

A Day in the Life:

• Client Relationship Management:

1. Collaborate with clients to clearly define their design aspirations and translate them into a formal design brief.
2. Facilitate seamless communication between the client and internal design team, ensuring client expectations are met and exceeded.
3. Proactively manage client expectations and navigate through any changes or challenges efficiently.

• Project Planning & Execution:

1. Develop comprehensive project plans using MS Project or similar project management software, outlining key milestones, timelines, and resource allocation.
2. Conduct regular meetings with client and internal teams to ensure clear communication, address design queries, and maintain project momentum.
3. Coordinate effectively with internal designers, landlords, architects, engineers, and other stakeholders involved in the project.

• Procurement & Tendering:

1. Identify and recommend qualified consultants to join the project team through a defined RFP process.
2. Assist the client in the tendering process, responding to technical queries, and clarifying project requirements.
3. Evaluate tender submissions, providing well-informed recommendations to the client for informed decision-making.

• Construction & Handover:

1. Facilitate regular stakeholder meetings throughout the construction phase, ensuring open communication and alignment.
2. Document meeting minutes for future reference and action tracking.
3. Manage client change requests, translating them into clear instructions for the project team.
4. Conduct regular site visits to monitor progress, oversee quality control, and address any logistical concerns.
5. Manage testing and commissioning procedures for project readiness.
6. Coordinate final inspections with landlord, consultants and contractors to ensure project compliance.
7. Prepare punch-lists and diligently follow up with contractors to rectify deficiencies.
8. Manage project close-out, including final accounts, handover documentation (as-built drawings, O&M manuals), and training sessions.
9. Oversee reinstatement and move management activities, ensuring a smooth transition to project completion.

What We Are Looking For:

• Minimum of 5 years of experience managing design projects in the Retail/Corporate industry. Junior candidates with demonstrably strong skills and relevant experience in design management may be considered.
• Proven track record of successfully delivering complex design projects on time and within budget.
• Excellent communication, interpersonal, and negotiation skills in both written and verbal formats.
• Strong organizational and time management abilities.
• Proven ability to prioritize tasks, manage multiple projects simultaneously, and adapt to changing circumstances while maintaining deadlines.
• Proficiency in design visualization software (e.g., AutoCAD, Revit), project management software (e.g., MS Project, Primavera), and communication tools (e.g., Microsoft Office Suite). Knowledge of BIM (Building Information Modelling) systems a plus.
• Experience with design procurement and tendering processes.
• Keen understanding of design constructability, able to identify potential constructability issues early in the design process and collaborate with designers to find solutions. Experience working with contractors and understanding how design decisions impact buildability and cost.
• Working knowledge of construction methods, materials, and regulations relevant to the industry. Ability to oversee construction activities, identify potential quality issues, and implement corrective actions promptly.
• PMP certification and/or LEED accreditation highly preferred. Demonstrates commitment to professional development and best practices in project management and sustainability.

Job Responsibilities

• Develop CAD from rough sketches/Produce drawings, documentations on electrical design
• Interpret and assist with technical proposals
• Assist FAT system at workshop
• Take initiative to resolve all the challenges encountered during the process of project
• Organize, manage and maintain proper documentations including project administrative
• Work with senior designer from inception to completion of project

Requirements

• Nitec/higher Nitec/Diploma in related field
• Fresh graduate who are willing to learn are welcome to apply
• Relevant 2-3 years working experience in the Maritime or similar industry preferred
• Candidates with administrative experience are welcome to apply
• Knowledge in PLC
• Proficiency in AutoCAD
• Good written and communication skills

Other Information

• 5 Days/ Monday to Friday
• Friendly & dynamic working environment

If you possess what it takes, we invite you to submit in a detailed and current resume stating current / expected salary and availability date.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Creative Direction:

1. Lead and manage the development of visual concepts, packaging designs, digital and print materials.
2. Ensure all creative outputs align with the brand’s aesthetic and message.
3. Provide guidance and feedback to the design team to maintain visual consistency across campaigns.

Campaign Management:

1. Oversee the creative execution of multi-platform campaigns, ensuring timely delivery and high quality.
2. Manage art direction across digital, social media, print, and physical experiences.

Collaboration:

1. Work closely with the Brand Communications Manager to maintain seamless communication and alignment.
2. Collaborate with other departments (marketing, product development, etc.) to ensure cohesive messaging and visuals.

Trend and Industry Knowledge:

1. Stay updated on the latest design trends, tools, and technologies.
2. Incorporate contemporary design practices and innovation into the creative process.

Budget and Resource Management:

1. Manage the creative department’s budget, including sourcing materials and collaborating with third-party vendors.
2. Ensure efficient use of resources to maximize campaign effectiveness within budgetary constraints.

Team Leadership and Alignment:

1. Conduct daily/weekly work-in-progress (WIP) meetings to ensure the team is aligned with ongoing projects and developments.
2. Provide leadership, mentoring, and feedback to junior designers and creative team members.

Vendor Relations:

1. Build and maintain relationships with external vendors for materials and production, ensuring they meet the brand’s quality standards.

Quality Control:

1. Ensure that all visual content produced adheres to brand guidelines and quality expectations.
2. Review and approve all design outputs before delivery to stakeholders.

Reporting and Analysis:

1. Track and report on the effectiveness of creative campaigns.
2. Analyze campaign results to inform future creative strategies.

*Job Description may be added to or change subject to growing business needs and upon discussion with the staff member.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

As a Process Gas Chromatography application engineer, you would be responsible for designing, developing, and optimizing gas chromatography systems. Your work would involve ensuring the proper functioning of gas chromatography instruments, troubleshooting issues, and providing technical support.

Responsibilities:

• To provide active support to gas chromatography tuning, preparation of GC operation data and report.
• Gas chromatography tuning involves columns installation, operation data collection, and handling of gas and liquid cylinders.
• Ability to troubleshoot gas chromatography issues.
• Support the manager to ensure the quality of the GC produced and to ensure the cleanliness and safety of the lab.
• Support the department on the daily operation activities.

Requirements:

• Minimum Degree in Chemical engineering/Chemistry/ Chemical Process, or any related module is preferred.
• Minimum 5 years of working experience as a Process Gas Chromatography Application Engineer, who is familiar with gas chromatography principles, operation, calibration, and data analysis is essential
• Proficiency in microsoft office.

We regret to inform that only shortlisted candidates will be notified.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

The Singapore University of Technology and Design (SUTD) has topped the list of emerging engineering schools (MIT report, 2018) and possesses a unique structure and mission within the vibrant nation of Singapore. SUTD features the integration of design with engineering, an intimate student to faculty ratio, an innovative active learning pedagogy, an interdisciplinary pillar organization, a stellar faculty, and a beautiful new campus. The Engineering Systems and Design (ESD) pillar within SUTD offers exceptional undergraduate and doctoral degrees with focus on Business Analytics and Operations Research, Financial Services, Supply Chain and Logistics, and Aviation Systems. ESD undergraduates are prepared for a wide range of engineering and management careers in private and public sectors, including healthcare, banking, manufacturing, supply-chain, energy, transportation, and entertainment and hospitality. They are equally adept at entrepreneurship and boldly initiating start-up ventures.

Job Requirements for Tenure-track/Tenured Faculty

We seek to fill positions in several areas including but not restricted to statistical and machine learning (ML), artificial intelligence (AI), operations research, data science, and industrial and systems engineering, with applications to healthcare, sustainability, supply chains and logistics, urban mobility, and quantitative finance.

The successful candidates will have earned or be nearing completion of a doctorate in an engineering systems-related field and have solid grounding in one or more systems methodologies including, but not limited to, AI/ML, optimization, stochastic modelling, statistics, game theory, financial engineering, and simulation. Empirical, experimental, computational, and analytical research approaches are all welcome. Candidates must be committed to excellence in teaching at the undergraduate and graduate levels and to developing and maintaining an active research program.

Successful candidates can look forward to competitive remuneration, assistance for relocation to Singapore, and attractive research start-up packages through SUTD Kickstarter Initiative (SKI) and grant opportunities.

A candidate’s full application package should include:

1. A cover letter
2. Curriculum Vitae (CV), including publications
3. Research statement / plans
4. Teaching statement / plans
5. 3 representative research papers
6. Contact information of 3 referees

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

• To carry out electrcial/instrumentation related detailed design and preparation of drawing.
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram.
• To carry out electrical/instrumentation calculation for the design.
• Responsible for reviewing of electrical/instrumentation documents and specification from clients and consultants.
• To check and review all electrical/instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office.
• To co-ordinate with engineers of other disciplines within the department.
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc….
• To provide technical support to project team for on-going projects and resolve any technical issue on site.
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

Machine Operation:

• Operate and maintain woodworking machinery (e.g., saws, drills, sanders, routers, planers, etc.)
• Set up and calibrate machines based on production requirements and design specifications
• Monitor machine operation to ensure high-quality, consistent output

Carpentry Production:

• Read and interpret blueprints, technical drawings, and work orders to produce precise wood products
• Measure and cut wood pieces to specified sizes and shapes
• Assemble wooden components into finished products using appropriate tools, fasteners, and adhesives

Quality Control:

• Inspect finished products for defects, ensuring adherence to design specifications and quality standards

Material Handling:

• Ensure that raw materials are readily available for production and efficiently used to minimize waste
• Organize and maintain materials for future production need

Maintenance and Safety:

• Perform routine maintenance and cleaning of woodworking tools and machinery to ensure they remain in optimal working condition
• Report machine malfunctions or required repairs to supervisors or maintenance teams

Collaboration and Communication:

• Work with team members to meet daily production targets and deadlines
• Communicate effectively with supervisors, design teams, and quality control to ensure product specifications and requirements are met
• Follow instructions and feedback from supervisors regarding any adjustments to work processes or materials

Requirements:

• Proficiency in Chinese and English. (The machine and system are in Chinese, require to coordinate with China)
• Can read 2D, 3D drawing
• 5 days Work Week

Roles & Responsibilities

• Handle full scope of QS duties which includes material take-off and variations.
• Provide estimating cost and implement Contract administration for renovation projects.
• Coordinate with project team for the cost estimation for any additional works.
• Ensure proper documentation of records concerning variation.
• Submit accurate cost and time implications to client.

Requirements

• Experience within a Design & Build or similar working environment as a Quantity Surveyor
• Preferably specialized in Interior Design or equivalent
• Candidate must possess at least Diploma in Quantity Surveying
• Previous experience of delivering projects with an understanding of challengers faced in terms of skill in time, cost and quality control and how to overcome them and exceed expectations
• Knowledge in MS Office including Microsoft Project, Excel, Word and Power Point
• Able to communicate in English and Mandarin is a must (To liaise with Mandarin speaking associates)

We are seeking a knowledgeable and detail-oriented Material Specialist to manage our Furniture, Fixtures, and Equipment (FF&E) library.

The ideal candidate will have a strong background in the design industry, with an understanding of suppliers and materials relevant to FF&E.

Key Responsibilities

1. Library Management: Organize, catalog, and maintain the FF&E library, ensuring easy access to materials and resources.

2. Supplier Knowledge: Maintain up-to-date knowledge of suppliers, products, and materials relevant to FF&E design. Organise supplier meetings

3. Research: Conduct research to support design projects, sourcing the latest trends, materials, and supplier information.

4. Documentation: Develop and maintain a comprehensive database of resources, including product specifications, pricing, and availability.

5. Collaboration: Work closely with design teams to understand their needs and provide relevant resources and materials.

6. Training: Provide training and support to team members on how to effectively utilize the library resources.

Qualification

• Experience as a Library would be advantage
• Strong understanding of FF&E materials, suppliers, and industry trends.
• Proficient in library management software and databases.
• Excellent organizational and research skills.
• Strong communication skills and the ability to collaborate effectively with diverse teams

Working closely with a Senior Interior Designer and other team members, you will support conceptual design approaches and develop project design and presentation drawings. In addition, you will support in coordination with other consultants and participate in project meetings and presentations as needed.

Responsibilities

· Support project deliverables at concept, schematic and design development.

· Collaborate on projects with our international design studios, project consultants and CAD team and 3D visualizers as required.

· Participate in project meetings and Client presentations as needed.

· Perform any additional responsibilities as may be requested or assigned from time to time.

Qualification

- Degree in Interior design

- Good at English communication

- Ability to use the design programs such SketchUp, Photoshop, CAD.

- Understand the design progress

Responsibilities

• To handle full set of interior design working including general design, presentation, documentation and site supervision
• Strong In Exterior & Interior Design conceptualizations and prepare details drawings
• Knowledge of Design Space Planning, Concept Development, Construction Detailing & Implementation
• Prepare presentations (2D, 3D, mock-up and renderings) for clients
• Attend client meetings and reporting of design progress. Determine Client’s goals and requirements, understand client’s needs to propose suitable designs
• Build and maintain good relationships with clients, suppliers and contractors

Qualifications & experience

• At least a Diploma / Degree in Interior Design or equivalent qualification with 7 years’ experience in residential interior design
• Required skill(s): AutoCAD, Adobe Photoshop, Sketch Up, Enscape, Microsoft Office
• Able to multi-task and work as an individual or part of a team in dynamic environment
• Demonstrate positive attitude and responsibility
• Willing to learn and self motivated

Job Description: We are seeking a skilled and creative Baker with experience in crafting both gourmet sandwiches and delicious muffins. The ideal candidate will have a strong background in baking, with a particular focus on perfecting the art of sandwich creation and muffin baking.

Responsibilities:

• Prepare and bake a variety of muffins, ensuring they meet our high-quality standards.
• Create an array of delicious sandwiches, paying close attention to flavor combinations and presentation.
• Maintain a clean and organized workspace, adhering to all health and safety regulations.
• Manage inventory and order supplies as needed.
• Collaborate with the team to develop new recipes and menu items.
• Provide excellent customer service and assist with any customer inquiries.

Requirements:

• Proven experience as a baker, with a focus on sandwiches and muffins.
• Strong understanding of baking techniques and ingredients.
• Ability to work early mornings and weekends.
• Excellent attention to detail and creativity in baking.
• Ability to work in a fast-paced environment.
• Good communication and teamwork skills.
• A passion for baking and creating memorable food experiences.

How to Apply: If you're a passionate baker with a knack for sandwiches and muffins, we'd love to hear from you! Please send your resume and a brief cover letter detailing your experience and why you'd be a great fit for our team to [[email protected]].

Essential duties and responsibilities for this position include:

The candidate will work together with a multidisciplinary research team to develop novel optoelectronic nanoscale devices and develop on-demand light-matter interaction technology.

The detailed job requirements:

• Strong publication track record
• Strong foundation knowledge in optics
• Strong capability with optical alignment and optical characterization is an essential requirement.
• Self-motivated and passionate on research work
• Possess good critical thinking and problem-solving skills.
• Good team player
• Excellent oral and written communication skills
• Prior experience with fabrication or manufacturing of optical elements or devices will be an advantage.
• Experience in FDTD or COMSOL for optics simulation will be an advantage.

Job Requirements

• PhD degree in physics/optics, materials science, and electrical and electronic engineering;
• Fresh PhD graduate and post-dos are welcome to apply for this position.

Key Responsibilities

• Required to manage and operate (hands-on) systems (server & storage) used in the University. Familiar with Microsoft Windows Server, SQL Databases, Linux, Cohesity Backup System, Office365, Microsoft HyperV, VMware/Netapp storage, Storage Spaces Direct, Hitachi (HCP), McAfee and Azure Cloud Platform. A strong knowledge on Microsoft Active Directory Architecture, PowerShell, Group Policies and Active Directory Federation Service is required.
• Required to provide Systems administration of Active Directory, Multi-Factor Authentication platform such as Okta, Antivirus and others.
• Required to provide Management systems availability statistics and patching reports, IT DR support and IT support for teaching-learning.
• Required to perform Systems hardening, Systems patching, Systems onboarding and decommissioning and other Systems related support services.
• Work with users to identify, understand requirements and develop deployment plans, assist with planning, developing, implementing and managing all system assets deployed in the University.
• Participate in process improvements such as operational efficiency of Systems Operations to provide prompt and effective support to existing systems.
• Rotational on-call duty along with team members and after office hours support.

Requirements

• Degree/Diploma in Computer Science or equivalent with at least 5 years of relevant working experience in design, configuration and management of Windows and Linux Infrastructure.
• Strong technical competencies and analytical mind, with specialized certifications such as MCSE, RHCE, CDCP, CCNA, ITIL, etc. would be preferred.
• Good working knowledge of IT governance, systems, security and system technologies and able to work with cross-functional departments.
• Excellent written, communication and interpersonal skills.
• Other traits include positive attitude, self-motivated, customer service oriented and a team player.

Only shortlisted candidate will be notified.

We are seeking a Senior Project Manager to be the interface between project ownership and delivery. You are required to act as a focal point of contact between the Client (or his representative), and Space Matrix, ensuring the desired project objectives are delivered.

In brief

• You will be responsible for implementing an appropriate and effective project or programme management framework for multiple corporate interior fit-out projects.
• You will manage project budgets including risk allowance. monitor and control changes/variations and ensure assigned projects are completed within budgets and schedules while meeting client needs, business objectives and design guidelines.
• You will coordinate and foster teamwork between all project stakeholders and ensure that project managers work cooperatively with the appropriate Client SMEs and keep them up-to- date on project status throughout the process.
• You will manage the design and project management/ site delivery team’s performance of delegated responsibilities
• You will be responsible for negotiation and coordination with vendors and business partners through the completion of the projects.
• You will establish and prepare formal reporting arrangements on project progress for the client and Company.

What we expect

• You are a project management professional with a minimum 8 years of experience in the building construction industry.
• You have relevant experience of managing corporate/ workplace interior fit-out projects.
• You have a diploma or degree in Architecture/project management or a related discipline.
• You have the knowledge of individual trades and subcontractors relevant to interior fit-outs
• You are tech-savvy, and have experience in successfully adopting digital and technology initiatives.
• You have the ability to work in a fast paced environment without compromising on quality and customer satisfaction.
• You work well under pressure and have the ability to work independently with minimal supervision.
• You will be a subscriber to the Company’s core values: teamwork, integrity and excellence.

About us:

Pls. visit our website www.spacematrix.com

Job Description: We are seeking a highly motivated and talented Research Fellow to join our interdisciplinary research team. The successful candidate will conduct cutting-edge theoretical and computational research in the following areas:

Research Areas:

1. Electromagnetism and Plasmonics: Theory and computational modeling of electromagnetism in complex media, plasmonic systems, and metamaterials, with a particular focus on cavity quantum electrodynamics (QED) and interactions between light and matter at the nanoscale.
2. Inverse Design in Nanophotonics and Quantum Nanophotonics: Application of inverse design techniques to optimize and design novel photonic structures and devices, including metasurfaces, photonic crystals, and quantum nanophotonic systems.
3. Plasma and Magnetohydrodynamics (MHD) Modeling: Development and application of advanced plasma modeling tools, such as particle-in-cell (PIC) simulations and magnetohydrodynamics (MHD), to study their interaction with plasmonic or excitonic systems.
4. Novel Optoelectronic Effects: Investigation of new optoelectronic phenomena in low-dimensional materials (e.g., 2D materials, nanowires, and quantum dots) and time crystals, focusing on their potential applications in next-generation devices.
5. Non-Hermitian and Topological Photonics: Study of non-Hermitian systems and topological photonics, including the exploration of novel phenomena such as exceptional points, edge states, and robust modes in photonic systems.

Key Responsibilities:

• Develop and implement theoretical models to describe complex physical systems in the research areas mentioned above.
• Conduct large-scale numerical simulations to study the behavior of plasmonic, nanophotonic, and optoelectronic systems.
• Analyze and interpret simulation results, developing insights into novel physical phenomena.
• Collaborate closely with experimental researchers, providing theoretical guidance and feedback on ongoing experimental work.
• Publish research findings in high-impact, peer-reviewed journals.
• Present research results at internal seminars, conferences, and workshops.
• Contribute to the development of computational tools and code libraries for the group's research.

Qualifications and Skills:

• Required:
  • A Ph.D. in Physics, Applied Physics, Engineering, Applied Mathematics, or a closely related field.
  • Strong background in electromagnetism, quantum mechanics, solid-state physics, and material sciences.
  • Solid experience in computational physics, with proficiency in numerical simulation techniques such as finite-difference-time-domain (FDTD), finite-element method (FEM), particle-in-cell (PIC) simulations, and magnetohydrodynamics (MHD).
  • Ability to develop and modify simulation codes to model complex, multi-physics systems.
  • Strong analytical and problem-solving skills, with the ability to derive and solve equations analytically or numerically.
  • Excellent written and verbal communication skills, with a demonstrated ability to write high-quality research papers and present complex ideas clearly.

Preferred:

• A strong publication record in top-tier journals in related fields.
• Experience with advanced simulation software (e.g., COMSOL, Lumerical, CST, or similar platforms).
• Familiarity with machine learning or artificial intelligence techniques for inverse design and optimization in nanophotonics is a plus.
• Ability to work independently and as part of an interdisciplinary team.
• Demonstrated creativity and innovation in solving complex theoretical and computational problems.
• Experience in collaborative research with experimentalists or other research groups is highly desirable.

Eligibility:

• Ph.D. holders with a relevant background in theoretical/computational physics, engineering, or applied mathematics are encouraged to apply.

• We seek out for a researcher with a PhD in Physics or similar. In particular the candidate is expected to have a strong back ground in many-body quantum physics with extensive experience in tensor networks and neural network quantum states.
• The researcher will work on developing the numerical approaches and apply them to areas such as quantum thermodynamics, many-body quantum systems out of equilibrium and biology.
• High competence in parallel programming and GPU programming is preferred.

Job Position:

Mechanical Engineer

Job Description:
We would like to recruit a Mechanical Engineer to aid our team in the development of a custom 3D printer. The machine would require a complex tool swapping system for custom built extruders. Furthermore, it will require automation mechanisms to increase production volume and efficiency
• Design and develop a 3D printer, including the kinematics, electronics, and thermal components. Generating a BOM of all parts required based on knowledge of 3D printing systems.
• Generate a detailed CAD model that shows the assembly process of the machine, to be provided to suppliers for the purchasing of parts.
• Generate custom G-Code to accommodate for the tool changing
• Generate custom G-Code for the automation mechanisms
• Include safety precautions for the multiple extruders and build plate
• Optimise the design as the project progresses through troubleshooting design flaws during testing, allowing for a more reliable printer.

Required/Preferred Skills:

• CAD Profiency
• Product Design and Design for Manufacturing & Assembly
• Electrical wiring and Electronics
• Problem-Solving
• Testing and Validation
• Project Management
• Familiarity and experience assembling and upgrading FDM systems
• Enthusiasm in building and problem solving

Required/Preferred Qualifications:

Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.

Experiences:

3+ years of experience in mechanical design, preferably with building customised 3d printer experience and related AM skills

Singapore University of Technology and Design immediately invites applications for multiple Research Assistant positions to work in Singapore, in the following areas:

· Robust perception, planning, and control for field robots
· Simultaneous localization and mapping
· Experimental robotics
· Novel mechanism synthesis and analysis

The position requires a M.Eng./M.Sc. in Engineering Product Development/Information System/ Mechanical/Electrical and Electronics/Computer Engineering or a related area.

Candidates are expected to possess experience in field robotic systems as evidenced by developmental project experiences/publications. Strong commitment to research and development is essential.