Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Art Teacher (Full-time / Part-time)

The HEart of our studio lies in our dedication towards delivering a holistic art programme, with a focus towards the engagement with the children and their learning experiences. The team is made up of nothing less than energetic individuals who are passionate for arts and teaching.

Heart Studio will be prioritizing applicants who have a current right to work in Singapore , and do not require Heart Studio’s sponsorship of a visa.

Main Responsibilities

- Create and conduct lessons for all curriculum and workshops according to HEart studio standards

- Teach Fine Art to children ( Sketching, painting and sculpture) in an engaging and creative manner

- Develop and prepare lessons plan and art related programs.

- Good communication skills to be able to engage and communicate effectively with parents , students and fellow teachers

- Demonstrate and assist students to use different techniques of art work aligned to their artistic abilities.

- Teach students to apply elements of design and modern principles of art

- Able to handle students of different age group

- Create a conductive environment to enhance learning

- Plan, coordinate Adhoc studio programs and events

- Effectively guide the students as per studio’s curriculum / lesson plan while tracking progress and providing timely feedback.

- Maintain studio cleanliness , housekeeping

Requirements:

• At least a Diploma/Degree in Fine Arts, Design or related fields
• 1-3 years of experience in teaching fine art to students in studio / pre school or equivalent capacity.
• Equipped with knowledge of painting and drawing
• Strong interpersonal skills and able to interact with all levels
• Enjoys working with children age 3 years to 17 years.
• Has patience and cares for children, comfortable communication with parents
• Keen for knowledge
• Strong foundation in classroom management
• Handles and communicate effectively with children and parents
• Independent, resourceful, self-motivated with initiative
• Honest, responsible and positive
• Proven track record and portfolio
• Able to work over weekends
• Competitive salary
• Part timers are welcome to apply

Working hours:

- Wed to Fri: 11am to 8.45pm

- Saturday: 9.30am to 6pm

- Sunday: 9.30am to 4.30pm

What Are We Offering :

· Competitive Salary

· On- the-job training & a great working environment.

If you are passionate about art education and possess the skills and qualities we are looking for, we would love to hear from you. This is an opportunity to be a part of an organization that values creativity, education and happiness.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Be a Part of Something BIG!

Singtel is seeking an Innovation Design Lead to spearhead the exploration and implementation of cutting-edge design technologies and methodologies. The Innovation Design Lead works at the intersection of design, technology, and business strategy to create forward-thinking solutions that push the boundaries of traditional design. From static imagery to motion graphics, the Innovation Design Lead is able to transform ordinary briefs into extraordinary experiences through creative execution and strategic campaign planning. The ideal candidate will have a strong creative vision and the ability to communicate effectively with both internal and external teams.

Make an Impact by

• Team Leadership - Manage and mentor a team of designers, fostering a collaborative environment that encourages creativity and innovation.
• Project Oversight - Oversee all stages of design projects from conception to execution, ensuring that timelines and quality standards are met.
• Campaign Planning - Collaborate with the marketing team to plan and execute creative campaigns. Ensure all visual content supports the overarching campaign strategy and business goals. Work closely with Creative Lead, marketing teams, peers, and other key stakeholders to brainstorm and develop content ideas. Provide clear, concise direction and feedback to internal and external parties involved in content production.
• Strong Copywriting - Able to complement visual content with creative, clear and concise writing.
• AI Integration: Utilize AI tools to streamline design processes, enhance creativity, and improve decision-making. This includes generative design techniques to explore new concepts and optimize existing designs.
• Stakeholder Communication - Able to collaborate across functions, present design concepts and solutions to stakeholders, articulating the rationale behind design decisions.
• Innovation & Trend Monitoring - Stay updated with industry trends, new technologies, and best practices in visual media. Continuously seek innovative ways to improve content quality and effectiveness, especially in an AI powered world.
• Strategic Design Leadership - Define the overall design strategy, ensuring that it aligns with the company’s vision and leverages AI capabilities to enhance product offerings.

Skills for Success

• Min Diploma holder
• A minimum of 5-10 years of experience in design roles, with at least 2-5 years in a leadership position at an in-house Creative team or advertising agency. Experience with AI-driven design processes is highly desirable.
• Proficiency in modern design tools (e.g., Adobe Creative Suite, Figma).
• Able to drive multiple projects from start to finish.
• An expert in design workflows with the ability to execute static ideas into moving visuals flawlessly. Doesn’t hesitate to get into the details, and does not lose sight of the broader strategic intent.
• Strategic thinker; always curious and creatively-minded in every way.
• Able to give and receive feedback positively without taking it too personally. See the value of different perspectives.
• Willing to work occasionally on weekends & public holidays, if required.
• Strong copywriting and presentation skills and be fluent in English.
• A leader and a good team player; able to work well independently or with a team while under pressure.

Rewards that Go Beyond

• Flexible work arrangements
• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Are you ready to say hello to BIG Possibilities?

Take the leap with Singtel to unlock new opportunities and accelerate your growth. Apply now and start your empowering career!

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Summary:

• Basic up to 6k
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to $8000 (depending on experience)
• Yearly AWS + Project incentives + Profit sharing
• Location: Telok Blangah
• 5 days work week @ 10.00am - 6.30pm
• Career advancement & stability

Key Responsibilities:

• Conceptualize and lead the design of luxury events and exhibitions
• Oversee the creation of 3D renderings, technical drawings and layouts
• Mentor and manage a team of designers to deliver exceptional work
• Manage vendors and contractors for seamless execution
• Conduct site visits to optimise spatial layout and attendee experiences
• Work closely with production team to align the design with client needs and ensure budget compliance
• Other relevant ad-hoc duties

Key Requirements:

• Min Degree in Interior Design or related field
• Min 7 years of experience in luxury, lifestyle and fashion event design
• Proficiency in design software (3ds Max, Adobe Creative Cloud, SketchUp, AutoCAD)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k +
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to $8000 (depending on experience)
• Yearly AWS
• Project incentives
• Profit sharing
• Location: Telok Blangah
• 5 days work week @ 10.00am - 6.30pm
• Career advancement & stability

Key Responsibilities:

• Conceptualize and lead the design of luxury events and exhibitions
• Oversee the creation of 3D renderings, technical drawings and layouts
• Mentor and manage a team of designers to deliver exceptional work
• Manage vendors and contractors for seamless execution
• Conduct site visits to optimise spatial layout and attendee experiences
• Work closely with production team to align the design with client needs and ensure budget compliance
• Other relevant ad-hoc duties

Key Requirements:

• Min Degree in Interior Design or related field
• Min 7 years of experience in luxury, lifestyle and fashion event design
• Proficiency in design software (3ds Max, Adobe Creative Cloud, SketchUp, AutoCAD)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to $8000 (depending on experience)
• Yearly AWS
• Project incentives
• Profit sharing
• Location: Telok Blangah
• 5 days work week @ 10.00am - 6.30pm
• Career advancement

Key Responsibilities:

• Conceptualize and lead the design of luxury events and exhibitions
• Oversee the creation of 3D renderings, technical drawings and layouts
• Mentor and manage a team of designers to deliver exceptional work
• Manage vendors and contractors for seamless execution
• Conduct site visits to optimise spatial layout and attendee experiences
• Work closely with production team to align the design with client needs and ensure budget compliance
• Other relevant ad-hoc duties

Key Requirements:

• Min Degree in Interior Design or related field
• Min 7 years of experience in luxury, lifestyle and fashion event design
• Proficiency in design software (3ds Max, Adobe Creative Cloud, SketchUp, AutoCAD)

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845