Job Description/Job Scope

1. Modeling of emerging data storage & communication channels and systems

2. Research and development of deep learning based channel detection and channel estimation techniques for emerging data storage and communication channels

3. Implementation of the developed algorithms into Python and Matlab packages

4. Working out research papers and patents

Qualifications, Skills, Experience

1. A PhD degree in Electrical Engineering

2. Fundamental knowledge on Machine Learning, Deep Learning, Error Correction Coding, and Signal Processing

3. Python and Matlab programming skills

4. Fluent in both written and oral English

Job Description/Job Scope

1. Characterization of emerging data storage & communication systems

2. Research and development of advanced channel coding algorithms and techniques, with a focus on polar coding

3. Implementation of the developed algorithms into Matlab and C/C++ software packages

4. Working out research papers and patents

Qualifications, Skills, Experience

1. A PhD degree in Electrical Engineering

2. Fundamental knowledge on Error Correction Coding, Polar Coding, and Digital Communications

3. Matlab and C/C++ programming skills

4. Fluent in both written and oral English

We have several available postdoctoral and research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for passionate interior designers to join our elite team in converting spaces into functional design. You will have the opportunities to collaborate with our experienced designers who have the track records in creating world-class designs for our delightful clients.

A Day in the Life

• Responsible for timely delivery of services and solutions with professionalism and quality at all times
• Work with lead designers and design teams in supporting design implementation
• Transform creative ideas into functional design concept based on given briefs and ensure that it is in line with clients’ objectives
• Provide space planning and design conceptualisation
• Liaise with clients on quotation and design
• Prepare layout plans, perspective drawings, elevation plans and dimensional drawings
• Present design to client for approval
• Prepare design documentations and material selections
• Work closely with project team, suppliers, sub-contractors and clients during construction/implementation phase
• Perform other ad-hoc duties as required

What We are Looking For

• Diploma/Degree in Interior Design or Architecture
• 3 to 5 years of working experience in Retail and Commercial interior design environment
• Have a strong design sensibility and the technical ability to develop a project from concept to execution
• Possess excellent technical design skills for fixtures with an eye for details
• Proficient in key design tools such as AutoCad, Sketchup, Vectorworks,3D Studio Max, Illustrator, VRay and Photoshop
• Hands-on experience in producing detail drawing and 3D modeling
• Demonstrate a good knowledge of architectural production standards, detailing, building materials, building codes and construction
• Good knowledge space planning & technical design from approved design schematic.
• Creative, resourceful and demonstrate out-of-box thinking
• Team player with a positive attitude as well as the ability to work independently
• Excellent presentation skill as well as verbal and written communication skills

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:
Singapore

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

ROLES AND RESPONSIBILITIES

• Good knowledge of interior architectural details, working drawings
• Flair in design; able to sketch fast and produce a good design concept
• Good understanding of materials cost and application
• Responsible for project deliverables, meeting overall project design schedules
• Result-oriented and passionate to deliver projects successfully
• Able to work independently
• Value support and cultivate cooperation among colleagues
• Work closely with the team , coordinate and implement the interior design of projects
• Liaison with client, sub-contractor

JOB REQUIREMENTS:

• Diploma in Interior Design
• 2-5 years of local working experience
• Fresh graduates with a desire to grow professionally are welcome
• Preferable experience in the workplace
• Fluent in spoken and written (English/ Chinese)
• Strong presentation, communication & interpersonal skills
• Team player with a positive attitude

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

Key Responsibilities

• Required to manage and operate (hands-on) systems (server & storage) used in the University. Familiar with Microsoft Windows Server, SQL Databases, Linux, Cohesity Backup System, Office365, Microsoft HyperV, VMware/Netapp storage, Storage Spaces Direct, Hitachi (HCP), McAfee and Azure Cloud Platform. A strong knowledge on Microsoft Active Directory Architecture, PowerShell, Group Policies and Active Directory Federation Service is required.
• Required to provide Systems administration of Active Directory, Multi-Factor Authentication platform such as Okta, Antivirus and others.
• Required to provide Management systems availability statistics and patching reports, IT DR support and IT support for teaching-learning.
• Required to perform Systems hardening, Systems patching, Systems onboarding and decommissioning and other Systems related support services.
• Work with users to identify, understand requirements and develop deployment plans, assist with planning, developing, implementing and managing all system assets deployed in the University.
• Participate in process improvements such as operational efficiency of Systems Operations to provide prompt and effective support to existing systems.
• Rotational on-call duty along with team members and after office hours support.

Requirements

• Degree/Diploma in Computer Science or equivalent with at least 5 years of relevant working experience in design, configuration and management of Windows and Linux Infrastructure.
• Strong technical competencies and analytical mind, with specialized certifications such as MCSE, RHCE, CDCP, CCNA, ITIL, etc. would be preferred.
• Good working knowledge of IT governance, systems, security and system technologies and able to work with cross-functional departments.
• Excellent written, communication and interpersonal skills.
• Other traits include positive attitude, self-motivated, customer service oriented and a team player.

Only shortlisted candidate will be notified.

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Seeking a full-time Research Assistant to join a team of researchers working to advance visual analytics in computer vision. Successful applicants will contribute to a research project that develops new techniques in image and video analysis.

Candidates should possess a strong interest in learning and researching state-of-the-art computer vision techniques, as well as a strong ability in coding and mathematics.

This position is ideal for individuals interested in pursuing an academically grounded, applied research career.

The candidate will be expected to:

• Understand basic machine learning and AI methodologies
• Code and run computer vision algorithms
• Contribute towards research conceptualization and methodology
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders

Skills and qualifications required:

• Obtained a Bachelors degree related to the computer science or mathematics
• Excellent written and verbal communication skills
• Strong programming skills.
• Proficiency with Python

How to apply:

Interested applicants are encouraged to send in their application with the following documents:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae

Enquiries about the position can be addressed to Assistant Professor De Wen Soh ([email protected])

Appointment will be initially made on contract basis for one year, renewable subject to good performance and mutual agreement.

We regret that only shortlisted candidates will be notified.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

The Trustworthy LLM/AI project is looking to hire Research Assistants / Senior Research Assistants. Each researcher will contribute in at least one of the following:

1. Research on automated vulnerability discovery (e.g., via Fuzzing) in IoT (Wireless) networked systems;
2. Research on IoT honeypot and threat intelligence.

Qualification & Experience:

• Bachelor's / Master's degree in Computer Science, Computer Engineering, or related field.
• Demonstrated expertise in software testing and/or software security and/or applied machine learning.
• Track record of strong R&D capability, with publications at leading cybersecurity conferences and/or journals.
• Working knowledge of the C/C++ or Python programming language.
• Working knowledge in binary analysis and code reverse engineering is advantageous.
• Familiarity with 5G and Wireless Networking is advantageous.

Job Title: Postdoctoral Researcher (3D-printed Injection Molds)

Scope of the Research:

The project aims to investigate the feasibility of fabricating 3D-printed moulds for injection moulding. The objective of the project includes:

• To identify materials and additives used for the process
• To fabricate well-defined micro and nanostructures by additive manufacturing
• To fabricate hierarchical structures with well-defined inner morphologies

• To characterize the properties of the fabricated structures
• To automate the fabrication process
• To modify or develop instruments applicable to the developed process

The researcher will work in an interdisciplinary research team consisting of electrical, chemical, and biomedical engineers, chemists, and materials scientists.

Qualification, Skills, and Experiences:

• PhD (for postdocs) or M.S./B.S. (for research assistants) in chemistry, materials sciences and/or related fields • Experiences in digital fabrication (3D printing, laser cutting, fluid dispensing)
• Experiences in the design and manufacturing of scientific instruments
• Experiences in microfluidics, microfabrication
• Experiences in digital fabrication, CAD, and 3D drawing and modelling
• Good track record of scientific publications
• Excellent written and oral communication skills in English

We are in search of a highly motivated and accomplished Research Fellow to join our team and significantly contribute to our upcoming research project "Empowering Real-World 3D Scene Understanding: Navigating Noise, Distribution Shifts, and Incremental Learning". The successful candidate will collaborate closely with our research team, working on the development of ground-breaking algorithms and methodologies for Real-world 3D scene understanding problems. This role offers an exciting opportunity to engage in cutting-edge research and have a substantial influence on the field.

Responsibilities:

• Undertake research in the field of real-World 3D scene understanding.
• Design and execute experiments to validate the proposed approaches.
• Analyze and interpret data sourced from inputs, including images or point clouds.
• Stay up-to-date with the latest advancements in real-world 3D scene understanding and related fields, and integrate new findings into research projects.
• Prepare research papers for publication in prestigious conferences and journals.
• Deliver presentations on research findings at conferences and other pertinent events.

Qualifications:

• A doctoral degree in Computer Science, Electrical Engineering, or a related discipline, with a specialization on computer vision and machine learning.
• A strong background in computer vision, machine learning, and 3D geometry.
• Proficiency in programming languages such as Python, C++, or MATLAB.
• Experience with relevant software libraries and frameworks, such as Pytorch, OpenCV, or PCL.
• A solid grasp of mathematical concepts related to 3D computer vision, including geometry, optimization, and statistical methods.
• A proven track record of publishing research papers in esteemed conferences or journals.
• Excellent problem-solving and analytical abilities.
• Strong communication skills and the capability to work effectively in a collaborative research environment.

We are inviting applicants for the position of Research Fellow to work on projects at the intersection of artificial intelligence, engineering, and design. The successful candidate will work with researchers from other domains to implement multimodal deep learning models with language, spatial and geometric datasets across the design scales of products, buildings and cities.

Requirements:

• Strong mathematical and data science knowledge
• Strong deep learning programming skills
• Strong interdisciplinary approach in working with large-scale and real-world datasets.
• Strong knowledge in innovation and entrepreneurship

The candidate should hold a PhD in AI, computer science, mathematics, data science, or other related field.