As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Responsibility:

• GDS layout and mask tapeout for MEMS devices;
• Performance and robustness simulation for MEMS microphones;
• Develop simulation models for MEMS microphone package/assembly level;
• Support failure analysis by simulation
• Write invention disclosures leading to patents for new devices

Requirement:

• At least a bachelor’s degree in Electronics /Physics/Mechanical Engineering or equivalent
• Skill at FEA modelling such as COMSOL, ANAYS etc. Experience with MEMS device layout using K-layout or similar tool
• Deep understand of mechanisms of MEMS devices
• Knowledge of MEMS fabrication processes
• Good analytical and problem solving skill

This is an opportunity to be a key player at a company with a great reputation in IoT semiconductor technology and growing business. We are looking for experienced/senior engineers to join our team in Singapore and be involved to develop the next generation IoT/AI chips based on a revolutionary architecture.

1. Work with team to define the design of WIFI/BT related modules.
2. Develop RTL design of one or more blocks, define RTL module partition, timing requirement etc.
3. Work with multi-disciplinary groups to make sure designs are delivered on time and with highest quality by incorporating proper checks at every stage of the design process.
4. Assist with the development of company documentation and generation of patents.

Qualification

1. Master's degree in Electrical Engineering (or equivalent), with 5+ years’ industry experience.
2. Team player, with good problem solving and communication skills.
3. Proficiency in System Verilog for RTL logic design and verification.
4. Familiarity with the design of digital MAC/baseband/high-speed interface/CPU or DSP is a plus.
5. Experience in Architecture/Block definition for SOC system such as WiFi, Bluetooth and GNSS.
6. Experience in micro-architecture design, and RTL coding with Verilog, familiar with Cadence and Synopsis tools.
7. Experience in synthesis, with analysis of power, timing and area.
8. Review micro-architecture to meet specification requirements and perform Design Quality Check
9. Experience in RTL and gate level simulation, unit test, system test and EDA verification

At Mediatek’s Memory Design Automation team, we work seamlessly with worldwide memory design team to deliver high performance, low power and small area in-house memories design kits and design flows under advanced technology nodes. We are looking for candidate to join us as memory design automation engineer for the delivery of robust memory and development of Memory Compiler automation flow.

Responsibility

1. Responsible for cutting edge technology node’s SRAM compiler design and deliver best quality of design kit.
2. Seamlessly collaborate with SRAM design and layout team to achieve highest quality of design kit delivery.
3. Responsible for data analysis and platform development of memory usage big data.
4. Responsible for physical verification (DRC/ERC/LVS/ANT/PERC) on SRAM compiler.
5. Responsible for spice simulation on timing, power and noise on SRAM compiler.
6. Responsible for QA check and development on SRAM compiler.

Requirements

1. Bachelor or Master Degree in Electrical and Electronic Engineering or Computer Engineering or Computer Science.
2. Multi-task capability and strong self-driven characteristics to meet challenging schedule.
3. Proficient with Perl, Shell, Python, C/C++ languages, knowledge with AI machine learning algorithm and infrastructure is an added advantage.
4. Strong interpersonal skills to work with team members with multi-cultural environment
5. Knowledge of high performance, low power SRAM/ROM and VLSI design is an added advantage. Experience with EDA tools will be helpful.
6. Candidate with experience is preferable.

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Mediatek’s Memory Design Automation team is looking for fresh talent to join us as a modeling engineer for the development of behavioral, FPGA, timing and DFT simulation models. The role will be required to create, debug and optimize SRAM models for ASIC design flow.

The candidate must be a team player, able to communicate clearly and concisely to deliver quality work on time.

About the team:

The Mediatek’s Memory modelling team collaborates with the world-wide memory design teams to create and qualify front-end models for use in the ASIC design flow. Team members will also be expected to perform circuit design verification to ensure memory circuits robustness.

What you do:

• Develop and integrate automation code into existing memory compilers to generate models meant for ASIC design flow.
• Develop automation flow and scripts with Perl or Python.
• Execute EDA tools from vendors such as Synopsys, Mentor to verify models’ correctness.
• Stay up to date with current modeling standards and development to improve models and flows for better memory IP performance.
• Work with memory design, compiler team and DFT team and tool vendors to resolve model issues and find solutions.

What you bring:

• Must have a Bachelor’s degree or higher in Electrical Engineering, Electronics Engineering, or related discipline with at least 3 years of semiconductor industry experience.
• Have at least 3 years experience using Linux systems.
• Good understanding of verilog syntax and its various aspects, such as behavioral, RTL and synthesizable verilog is a must.
• Good understanding of liberty timing syntax.
• Good understanding of upf and system verilog.
• Knowledge and experience with EDA simulation tools such as VCS, NC is required
• Experience with EDA tools will be helpful:

o DFT: Logicvision, Tessent, Fastscan

o Synthesis: Design compiler, Genus

o Simulation tools:VCS, QuestaSim, NC

o STA tools such as PrimeTime

• Good scripting and flow automation skills, in Perl or Python.
• A team player, meticulous, able to work and learn independently are important attributes for this job.

Location: One North, Singapore

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. of 8 years of relevant verification experiences.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Research Scientist for Research on Wireless Power Transfer

The hired Research Scientist will work on the research of wireless power transfer (WPT) in the Biomedical EM Lab at Singapore University of Technology and Design (http://people.sutd.edu.sg/~huangshaoying/). The contract is 1 year (renewable) for research assistants.

Project Description

The project is to investigate the electromagnetic mechanisms for a compact, efficient, and wideband antenna/radiator suitable for wireless energy harvesting (WEH)/WPT. This exploration will span both conductive and magnetoelectric (ME) antennas. Our study will consider WIFI, power from base stations, and WPT as potential power sources.

Job Scopes:

• Literature review of the research domain
• Investigations on the electromagnetic mechanisms for a compact, efficient, and wideband antenna/radiator suitable for WEH/WPT
• Designs of small antennas/radiators for WEH/WPT
• Antenna/radiator fabrications and testing
• Paper writing and documentations

Your profile

We are looking for a researcher with the following expertise and skills,

• A PhD in electrical engineering, physics, or related field
• Knowledge on EM theories microwave engineering, especially antenna theories and transmission line theories
• A background on EM modeling and simulation software (e.g., CST)
• Research or design experience on WEH/WPT and/or antenna designs
• Testing and characterization of RF/microwave devices or components
• Python/Matlab coding
• Good track record of the capacity to drive first author publications
• Good communication skills and interpersonal skills
• A good team player

For interested candidates

Interested candidate please send your CV to Huang Shaoying at [email protected]

Job Position: Research Engineer

Job Description

We are seeking machine learning and image recognition specialist to join our project team. The ideal candidate preferably has the background in machine learning techniques and image recognition algorithms to solve complex problems and improve project outcomes. You will work closely with a multidisciplinary team to develop, implement, and optimize ML models that are critical to the success of our projects.

• Design, develop, and deploy machine learning models and image recognition algorithms tailored to project-specific requirements.
• Collaborate with cross-functional teams to understand project needs, gather, and analyse requirements, and deliver ML-driven solutions.
• Conduct data collection, preprocessing, and augmentation to create training datasets.
• Implement and optimize image recognition models for accuracy, efficiency, and scalability.
• Evaluate model performance using appropriate metrics and make necessary adjustments to improve outcomes.
• Stay abreast of developments in machine learning and image recognition fields to incorporate cutting-edge technologies and methodologies into project solutions.
• Document model development processes, algorithms, and performance metrics.
• Provide technical guidance and mentorship to team members on machine learning and image recognition best practices.

Required/Desired Skills

• Experience in machine learning and image recognition, with a strong portfolio of project work that demonstrates expertise in these areas.
• Proficiency in programming languages such as Python, and familiarity with ML libraries (e.g., TensorFlow, PyTorch) and computer vision libraries (e.g., OpenCV).
• Experience with deep learning architectures (CNNs, RNNs, GANs) specifically designed for image processing tasks.
• Analytical skills with the ability to solve complex problems independently and as part of a team.

Required/Desired Qualifications

• Bachelor’s or master’s degree in Electronics & computer science, Artificial Intelligence, or a related field.

Experiences

Minimum 3 years’ experience in machine learning and image recognition within a technology/research organisation. Fresh graduate with relevant knowledge and skills will be considered.

Responsibilities:

• Manage and support the interior design development and coordination process throughout the design and documentation phases.
• Manage the execution of interior works from tender till completion and handover
• Monitor to ensure resolution of design and technical coordination issues at site
• Review of Contractors’ submissions, work schedules, materials samples, shop drawings etc.
• Conduct site & factory visits, monitoring of quality of on and off-site fabrication
• Monitor and report of interior works progress and qualities, to ensure delivery timeline and workmanship

Requirements:

• Degree in Interior Architecture / Architecture or any related field
• At least 6 years of relevant experience in Interior Design & Site Execution, preferably with premium residential, offices, hotels experiences
• Self-driven, and able to work independently.
• Ability to multi-task and to work under pressure.
• Excellent problem-solving skill.
• Strong organizational, communication and interpersonal skill.
• Proficient in Project Management Programs, AutoCAD, SketchUp, 3D Max, Illustrator or other design programs, Microsoft Excel, Word, etc.