Requirements:

• A Bachelors degree from reputable university.
• Qualifications or work experience in psychology, cognitive science, or healthcare in elderly population is preferred.
• Equipment with research skills, such as literature review, conducting experiments, basic statistical analysis, report write-up, etc., is preferred.
• Experience in qualitative study research, including data collection and audio transcription is a plus.
• Proficient in Hokkien is a plus.

Responsibilities:

• To assist and work closely with the research team SUTD PI and Research Fellow in managing and coordinating all matters in the project
• To arrange and schedule experiment/interview appointments with university students, healthy elderly participants, elderly care centres, or other target population
• To undertake data collection, data entry, data analysis, etc.
• Assist in the preparation and writing of progress reports, presentations, and abstracts to conferences.
• To undertake and support administrative work, such as procurement and purchasing laboratory items, liaising with relevant internal and external parties, etc.
• Any other duties assigned by the research team

Responsibilities & Duties

• Liase with Client, Consultant and project team for the planning, execution, and completion of projects.
• Leading monthly meetings.
• Ensure on-site work comply with the local authority requirements.
• Coordinate with supplier / sub-contractor of the tender specification and quotation.
• Prepare weekly work schedules.
• Oversee and hold overall responsibility for works carried out by junior supervisors assigned under his/her care.
• Ensure that all aspects met the government regulations and standards, including safety of works, inspections and testing of equipment and machinery, training needs of staff.
• Provide timely design progress reporting to management.

Requirements

• Diploma / Degree in Engineering or equivalent
• Minimum 3 to 5 years of experience in ACMV Design work
• Knowledge of Cleanroom System Design and Room Heat Load Calculation
• Ability to create proposal design documents
• Proficient in conducting fieldwork measurements to comprehend the site environment
• Conversant with local codes and regulations for ACMV
• Good analytical, communication and interpersonal skills
• Efficient, analytical skills and able to design work independently

Benefits

Working hour : 8:30am to 5:30pm (5 days’ work week)

1. AWS

2. Annual leave 17 days, up to a maximum of 22 days

3. Transportation reimbursement claims (2 ways from home to office/site)

4. VB – subjective

5. Medical / Dental benefits

6. Insurance – Hospital & Surgery, Personal Accident and Term Life

7. Annual heath screening up to $200

JOB PURPOSE:

The Design Engineer will be responsible for designing solutions encompassing both hardware and firmware for target applications identified by the Design Center.

PRINCIPAL ACCOUNTABILITIES:

The main design direction of the Design team is focused on machine learning and communications, with the goal of creating reference designs that allow Futures’ customers to implement their own systems at a second level.

By specializing in these areas, the Design Engineers can leverage their design experience and training to provide valuable support and add value to the customer's design process.

While the Design Engineers will not directly interface with all of Future's customers, the Technical Sales Manager (TSM) will take the lead in engaging with customers, while the Design Engineers will provide backend support.

JOB CONTENT (PRIMARY & SECONDARY FUNCTIONS):

It is the responsibility of the Design Engineer to carry out the following:

Primary Functions

· Design, development, testing and support of firmware/embedded software applications for microcontroller.

· Drive technology/development projects in all phrases from specification to release.

· Read or understand electronics schematic and system design.

· Work closely with cross functional teams to ensure project delivery on time.

· Define and create product software specification including software architecture, feature descriptions and applications notes of the system.

· Research technical issues and/or opportunities and provide recommendations.

· Participate in ad hoc software projects and assignments as required.

· Ability to perform schematic capture and PCB design is a plus.

Secondary Functions

· Support Center Director to generated training materials and solution specification.

CREDENTIALS:

QUALIFICATIONS

· Diploma/Degree in Computer or Electrical or Electronic Engineering or equivalent.

EXPERIENCES

· Proficient in C, C++ programming, Python, TensorFlow

· Knowledge of embedded electronics fundamentals

· Experience in real-time operating system

· Experience on developing Industrial controllers' products with machine learning is added advantages.

· Able to read schematics and utilize Oscilloscopes and other test equipment to debug Firmware issues.

· Strong analytical skills with ability to learn and apply research theories into developing algorithms to solve real world problems.

· Good leadership qualities (take initiative and have ownership)

· Able to work independently within tight schedule with positive disposition.

Competencies (Knowledge, Skills & Attitudes)

· Possesses strong Communication and Presentation Skills, including the ability to present information and ideas in a confident fashion to the customer’s engineers and technical managers.

· Displays good Commercial Awareness and Understanding of the business impact on how designs affect customers' profitability.

· Able to commit to response times and have sense of urgency.

· Proficient in allocating own resources.

· Able to select and specify devices for designs.

· Able to make decisions on how to optimize limited company resources.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

This position involves working on a project related to climbing robots and their application in port operations. The objective of this role includes designing a basket for the climbing robot and developing the robot’s limbs, considering their functions. The role offers the opportunity to collaborate with the research team at the National University of Singapore, led by members from the Department of Mechanical Engineering, and specialists from a high-technology company. The successful candidate will be self-motivated with an outstanding track record in robotics, mechanical design, or related disciplines. The main research tasks for the project include, but are not limited to:

• Designing and developing the payload of an articulated vertical climbing robot.
• Designing the climbing robot’s limbs and conducting tests in real-world outdoor environments

Qualifications

• Excellent modelling skills
• Experience with mechanical design
• Experience with manufacturing
• Literature review/summarizing skills
• Good writing/spoken communication skills

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

This position involves working on a project related to climbing robots and their application for port operations. The objective of this position includes developing a climbing robot control system and designing the corresponding hardware, to control a climbing robot can climb on the containers and function as a lashing bar. The role involves the opportunity to work with the research team within National University of Singapore in which the team leaders are from the Department of Mechanical Engineering, alongside Specialists from a high technology company. The successful candidate will be self-motivated with an outstanding track record in robotics, control, computer science, or related disciplines. The main research tasks for the project include but will not be limited to:

• Designing and developing electronics hardware for an articulated vertical climbing robot.

• Implementing the control system on hardware and conducting tests in real-world outdoor environments

Qualifications

• Good coding skills in C/C++

• Experience with hardware and electronics/circuit design

• Experience with embedded system (Arduino, STM32, etc.)

• Literature review/summarizing skills

• Good writing/spoken communication skills

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

A Day in the Life

• Conduct research on visual ideas
• Conceptualise and sketch graphics designs based on requirements/specifications
• Develop and execute ideas from concept stage to FA
• Delivering production artwork / guidelines / planogram artwork for Commercial implementation.
• Work closely with team members on implementation of concept and designs
• Oversee work rendered from colour proof/mock-up to final print and application
• Conduct on-site inspections to ensure that graphic designs are according to specifications

Who We Are Looking For

• Degree/Diploma in graphic design or visual communication
• Minimum 2 years of experience in graphic designs
• Experience in retail design and planograming will be an added advantage.
• Proficient in Adobe Creative Suite (Photoshop, Illustrator, Indesign and Acrobat)
• Able to create a variety of design styles
• Self-driven and positive work attitude
• Able to work effectively in a team and respect others
• Organised and meticulous
• Able to deal with challenging situations, and competing demands and priorities
• Able to work well with others to produce a successful outcome
• Understanding of fabrication methods and material standards will have an added advantage

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

As a Design Engineer, you will be responsible for leading the design process for solar power projects, from conceptualization to implementation. You will collaborate closely with cross-functional teams including project managers, professional engineers, LEWs, electrical engineers, and contractors to ensure the successful execution of solar energy projects. Your expertise will be pivotal in optimizing solar system designs and ensuring compliance with engineering standards.

• Contribute to the design and engineering review process for EPCs’ master document list submission, including system sizing, layout optimization, solar structural design and balance of system engineering.
• Collaborate with internal teams and external EPCs to integrate solar PV systems with existing infrastructure and building designs, including system components to suit site condition and in accordance to solar engineering standards (IEC, local standards, etc).
• Design and develop electrical single-line diagram, panel schedules and connection diagram for solar electric systems using computer-aided design (CAD) software.
• Complete all electrical calculations in detail related to the project (DC and AC).
• Review PVSyst reports and PR calculations.
• Assist in getting endorsements from Professional Engineers and LEWs for the related engineering calculation, analysis documents and drawings.
• Provide technical support to Project Manager and Engineer during design review, installation, start-up, testing, system commissioning, or performance monitoring.
• Provide technical guidance and support to junior engineers and project teams, fostering a culture of continuous learning and development.
• Stay abreast of emerging technologies, trends, and best practices in solar energy and construction industries, and integrate them into project designs.
• Play the role of document controller for the master document list and keep track of its transmittal.

Requirements:

• Bachelor’s degree in Electrical Engineering, or related field.
• Proven experience in the design and engineering of solar power systems, preferably in the construction industry.
• In-depth knowledge of solar PV technologies, components, and system configurations.
• Strong understanding of electrical systems, grid integration, and power distribution principles.
• Familiarity with local building codes, regulations, and permitting processes in Singapore.
• Excellent analytical, problem-solving, and decision-making skills.
• Effective communication and interpersonal abilities, with the capacity to collaborate effectively across diverse teams and stakeholders.
• Proficiency in CAD software (AutoCAD, SolidWorks, etc.) and PV design tools (PVsyst, Helioscope, etc.).

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Key Responsibilities

• Required to manage and operate (hands-on) systems (server & storage) used in the University. Familiar with Microsoft Windows Server, SQL Databases, Linux, Cohesity Backup System, Office365, Microsoft HyperV, VMware/Netapp storage, Storage Spaces Direct, Hitachi (HCP), McAfee and Azure Cloud Platform. A strong knowledge on Microsoft Active Directory Architecture, PowerShell, Group Policies and Active Directory Federation Service is required.
• Required to provide Systems administration of Active Directory, Multi-Factor Authentication platform such as Okta, Antivirus and others.
• Required to provide Management systems availability statistics and patching reports, IT DR support and IT support for teaching-learning.
• Required to perform Systems hardening, Systems patching, Systems onboarding and decommissioning and other Systems related support services.
• Work with users to identify, understand requirements and develop deployment plans, assist with planning, developing, implementing and managing all system assets deployed in the University.
• Participate in process improvements such as operational efficiency of Systems Operations to provide prompt and effective support to existing systems.
• Rotational on-call duty along with team members and after office hours support.

Requirements

• Degree/Diploma in Computer Science or equivalent with relevant working experience in design, configuration and management of Windows and Linux Infrastructure.
• Strong technical competencies and analytical mind, with specialized certifications such as MCSE, RHCE, CDCP, CCNA, ITIL, etc. would be preferred.
• Good working knowledge of IT governance, systems, security and system technologies and able to work with cross-functional departments.
• Excellent written, communication and interpersonal skills.
• Other traits include positive attitude, self-motivated, customer service oriented and a team player.

Skills: Performance control and optimization for decarbonizing urban operation (nonlinear) systems

Qualifications:

• PhD degree in control science and engineering, computer science, electrical engineering, or applied mathematics.
• Have multiple publications in top conferences/journals in system control, computer science, electrical engineering, networking, experiments, and system optimization.
• Fluent in oral and written English.

Experience:

• Expertise in research in control algorithm design and system optimization using performance control, machine learning, stochastic modelling, optimization, or game theory.
• Good at applying mathematical modelling and control algorithms to large-scale networks.

Postdoctoral Research Position in Optimization, Learning in Games, and Reinforcement Learning

Job Description:

The ESD pillar at SUTD invites applications for a postdoctoral research position in the fields of optimization, learning in games, and reinforcement learning. This position offers an exciting opportunity to engage in cutting-edge research and collaborate with leading experts in these areas.

Responsibilities:

• Conduct original research in optimization, learning in games, and reinforcement learning.
• Develop novel algorithms and theoretical frameworks to advance the understanding of these fields.
• Publish research findings in top-tier peer-reviewed conferences and journals.
• Collaborate with faculty, graduate students, and other researchers on related projects.
• Participate in seminars, workshops, and other academic activities within the department.
• Mentor and supervise undergraduate and graduate students.

Qualifications:

• A Ph.D. in Computer Science, Applied Mathematics, Electrical Engineering, or a related field.
• Strong background and research experience in stochastic optimization, game theory, and reinforcement learning.
• Demonstrated ability to conduct high-quality research and publish in leading academic venues.
• Proficiency in programming languages such as Python, MATLAB, or similar.
• Excellent written and verbal communication skills.
• Ability to work independently as well as in a team-oriented environment.

The Testing and Certification Engineer for the Asia & Pacific Open Testing and Integration Centre (OTIC) in Singapore will be responsible for conducting testing with customers and testing tool providers, analyzing and evaluating testing results to certify O-RAN components.

Main Responsibilities:

• To work with the testbed System Architect, Technical Manager, and the other team members to configure and test a device-under-test (DUT) / system-under-test (SUT) of different customers.
• To understand the test specification and certification specified by standards bodies such as 3GPP, O-RAN, ETSI.
• To work with customers and testing tool vendors to configure and integrate DUT / SUT and the testing tools to achieve the testing / integration / certification objectives.
• To design, develop and deploy test cases to evaluate different O-RAN-based DUT / SUT.
• To participate in international organization discussion meetings (ORAN Alliance, TIP, MGMN), update the latest specifications defined by these standards bodies, and contribute to defining upcoming specifications/standards.
• To design, develop, and deploy test cases for manual and automation test scripts to evaluate different O-RAN-based DUT / SUT.
• To design detailed criteria and implement the procedures for each certification defined in standards.
• To analyze test results and assist customers in troubleshooting interoperability, security issues.
• To research 5G-related specifications and technologies for 3GPP and O-RAN.

Job Requirements:

• Bachelor or Master’s degree in computer science, computer engineering, communication engineering, or related fields.
• Hands-on experiences in Linux systems, virtualization/containers, edge/cloud systems deployment and management (e.g., Kubernetes).
• Good programming skills, e.g.: Python, shell scripting, C / C++.
• Hands-on experience and working knowledge of developing and deploying automation test tools (e.g., Jenkin). Experience with CI/CD is a plus.
• Hands-on experience and working knowledge in deploying and operating wireless networks (e.g., LTE, 5G networks).
• Familiar with 3GPP, ETSI standards, and O-RAN specifications is a plus.

Enabling Competencies:

• Analytical and problem-solving skills.
• Good interpersonal, communication and writing skills.
• Able to work independently and as a good team player.
• Adaptable and able to multi-task in a fast-paced environment.
• Ability to work under pressure.

Responsibilities:

Graphic Design

• Design and produce high-quality graphics for various mediums, including print and digital media.
• Collaborate with other departments to develop visually appealing and cohesive marketing and publicity materials.
• Create engaging visuals for the website and assist in updating website content.
• Manage and update content on Plasma TV displays.
• Maintain and uphold brand guidelines across all design projects.

Food Photography

• Plan, style, and execute food photography sessions to create appealing images for marketing materials, social media, and the company website.
• Edit and retouch photos to ensure high-quality, professional results.

Communications and Digital Content Creation

• Assist in writing notices, eBlasts, letters, and speeches.
• Assist to produce engaging multimedia content.

Requirements:

• Minimum Diploma in Graphic Design / Multimedia or equivalent with minimum 2 years of relevant experience in graphic design, communications, and food photography, preferably in a corporate or agency setting.
• Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign, AfterEffect) and other design software.
• Proficient in WordPress for website maintenance.
• Expertise in food photography, including styling, lighting, and editing.
• Knowledge of digital marketing strategies and tools, including social media platforms and content management systems.
• Basic writing and editing skills, with a keen eye for detail and meticulous attention to accuracy.

The Retail Interior Design Consultant is responsible for driving sales in retail and designer sectors. A full understanding of northern european design concepts is required. He/She is responsible for driving the store's sales performance and service performance for specific brands. He/She also engages in innovation and productivity initiatives for the store. In order to drive seamless customer experience across channels. The Retail Interior Design Consultant overseas the entire requirements for the customer and needs to be able to use design software to develop the clients ideas. He / she operates in a fast-paced, diverse and customer-centric store environment.

~ Achieve sales targets. Follow up with customers.

~ Liase with key foreign suppliers
~ Manage service brand.
~ Design solutions for retail customers
~ Monitor merchandising presentation and develop visual display.

~ Understand sales trends

- Weekend and public holiday working is key to the achievement in the role

- Customer service skills are essential

We are seeking applicants for a full-time postdoctoral research fellow position in non-Hermitian physics (ONLY theory and simulation). The successful candidate will apply quantum mechanics and computational simulations to study the physical properties of non-Hermitian system and their nonequilibrium behaviour, as well as to explore potential device applications. The successful candidate may also carry out electrical circuit design, fabrication and measurement to experimentally confirm various non-Hermitian systems.

Essential job requirements:

• PhD in computational/theoretical Physics or a related field
• Strong expertise in condensed matter physics, especially in non-Hermitian physics
• Good understanding on topological electrical circuits
• Proven publication record

Additional requirements (optional):

• Machine learning technique
• Background in industrial circuit design software
• Some experiment experience in electronics and circuits

The pillar of Architecture and Sustainable Design at the Singapore University of Technology and Design invites applications for a full-time Tenure-Track Assistant Professor position in Architectural and Urban Design.

Candidates are expected to teach undergraduate (B.Sc.) and graduate (M.Arch) design studios as well as supervise PhD students. Additionally, candidates are expected to conduct research and produce creative work within a research-intensive university setting, seek for research funding from relevant government and industry sources and contribute to architectural and urban design research via academic publishing and creative work.

Job Requirements

Candidates should possess an accredited graduate degree in Architecture (M.Arch, PhD or equivalent), demonstrate outstanding past academic teaching and/or professional work in design and excellence in design research. Applicants should submit the following documents: cover letter, up-to-date curriculum vitae, research statement, teaching statement, portfolio of professional creative work, contact information of at least three references.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a full-time Research Associate to work in the Urban Climate Resilience module of the Future Resilient Systems programme, with a focus on Digital Twin-Enabled District Energy System Resilience. The appointment is for at most 12 months. The appointment is expected to start early 2024.

This collaborative research concerns the development of a digital twin for urban climate resilience, especially with respect to building operational GHG emissions, and interactive decision support. As a first pilot study, a digital twin of district energy systems was created for the NUS campus to investigate how past events and possible future scenarios can affect the resilience of these systems. This digital twin comprises a data visualization platform and building energy demand models for scenario assessment. Electricity and cooling meter data were collected for several buildings on campus, as well as WiFi connection logs providing an estimate for the number of occupants in each building. Analyzing the data showed that buildings’ cooling systems are operated in a relatively centralized way, meaning that buildings consume energy for cooling whether they are occupied or not. To explore future scenarios for the case study area, these meter data were used to calibrate building energy demand models for a baseline year. Standards were used for other buildings to make appropriate assumptions for the needs for different building typologies. The platform allows to display these simulation results in a variety of ways, such as by typology, by energy use intensity, or by energy use per capita. Different forecast scenarios have been considered to investigate how different building system operation modes can support the transition to flexible work arrangements post-COVID. The scenarios show there is a significant potential for energy savings by operating buildings in a more occupant-driven way, where only occupied workspaces are actively conditioned.

To expand the platform, additional use cases have been considered, such as modelling the campus’ thermal networks to investigate the effects of different scenarios on the existing cooling infrastructure, or investigating how electric vehicle charging could be used for load management to increase demand flexibility and thus build resilience into the electrical grid. While the actual digital twin platform is being developed as a PhD research, you would contribute to the larger research through one or more building operational energy-related case studies.

Qualifications

• Candidate must have a Master’s degree with at least 2 years’ relevant work experience, and good knowledge, skills and expertise in relevant field or PhD candidates who have at least 2 years’ experience as a fulltime PhD student and expected to complete a PhD degree within six months of starting the appointment may also be considered
• Good time management and planning;
• Excellent command of both spoken and written English;
• Highly motivated individual with capacity to work independently;
• Scripting/computer programming knowledge is required;
• Knowledge of data analytics and/or data visualization is desired;
• Expertise in building simulation and/or the application of deep learning is a plus.

LAI Games is an arcade experience company that connects people with games. Our vision is to reinvent the arcade industry by creating an arcade experience ecosystem that consists of physical arcade games and location-based VR games and experiences,

and other exciting arcade-based titles. Our team members contribute across a broad range of unique and innovative projects that connect, engage, and excite players across physical and virtual worlds.

LAI games is growing, and we want to expand our support to our customers by offering remote software management of our games, and we want to provide our customers with comprehensive use-data of our games. We want to expand our software team for this, and we’re looking for an experienced software engineering manager to realize this ambition.

The Senior Mechanical Design Engineer will lead and as well as engineer solutions to mechanical design challenges in amusement and arcade machines, taking ideas from concept through to mass production in an innovative, cost effective, production-friendly

manner. The position offers the candidate design freedom to explore new ideas as well as showcase his/her leadership skills by being a team lead in assigned projects.

What You’re Responsible For

• Create 3D and 2D CAD mechanical part and assembly drawings that detail the product’s design intent, supported by engineering calculations where necessary.
• Be the Mechanical Engineering team leader and offer guidance to the team and mechanical engineers.
• Review engineering designs & related documentation (e.g., 2D drawings, BOMS, calculations, tolerance analysis, etc.) from Mechanical Engineers with the aim of achieving the most optimal design with emphasis on reliability and safety Lead the DFX and support FMEA activities
• Create where needed specifications that align with stakeholders and bring clarity to the products to be produced.
• Lead or assist in development of validation requirements and associated validation test protcols
• Create RFQs and purchase requests for parts from suppliers and these may include electro-mechanical elements such as motors, solenoids, sensors, etc. Do simple sourcing of catalogue parts to fulfill prototyping and testing needs prior to production release, e.g., during concept trials.
• Ensure released product design is DFX optomized, manufacturable, reliable, repeatable, cost optimised (including optimised for container loading) and is safe and easy for assembly & servicing at customer locations.
• Ensure released product design meets regulatory requirements of the destination region such as CE mark & UL22.
• Specify and manage product BOMs.
• Along with Sustaining Engineering, manage engineering changes via Engineering Change Notifications with supporting engineering documentation.
• Document the key aspects necessary to accomplish the reliable manufacturing of products that will perform consistently in specified operating environments.
• Design & build mock-ups and prototypes by collaborating with vendors & technicians and/or via 3D printing.
• Collaborate with professionals outside the mechanical engineering team. This includes discussing and solving complex engineering problems with the various team members, suppliers, test labs and customers.
• Support project teams to meet agreed project deadlines, scope, quality & budget.
• Support Supply Chain team in specifying, analysing & testing components/product for alternate source or for cost reduction activities
• Support customer related quality issues with quick & reliable engineering solutions that are supported with test results.
• Help the technical documentation writer by supplying technical information and other required information to complete user/operator manuals, etc.
• Support lessons learnt documentation to prevent recurrence of repeat issues.
• Help with on-site setup and conduct its testing and reporting
• Travel to visit suppliers and production facilities when needed.

What We’re Looking For

• Minimum 6 yrs. of mechanical engineering working experience designing machines with electro-mechanical components, linkages, springs, etc.
• Very good working experience in: 3D & 2D CAD software, preferably Autodesk Inventor with a working knowledge in 3D surfacing, dynamics and FEM (mechanical stresses).
• Sheet metal design, especially for non-stamping processes, such as bending, welding and laser cutting and applicable secondary processes such as powder coating, spray painting, electroplating, etc.
• Designing with non-ferrous materials such as plywood, MDF and sheet plastics.
• The creation and maintenance (ECNs) of 3D & 2D drawings and BOMs.
• Specifying manufacturing and product tolerances and performing tolerance analysis
• Performing engineering calculations such as kinematics of linkages, torque requirements. analysis, forces in linkages, simple stress calculations of beams.
• Conducting root cause investigations, testing and writing reports using MS office applications.
• Conceptualising and designing reliability test rigs & writing test procedures to prove designs.
• Performing data analysis using MS Excel.
• Reviewing and providing constructive feedback on designs or documentation improvements.

Additional Attributes

• Mechatronics experience. Maker passion
• 3D printing technologies and able to work with 3D printers using the FDM method
• Designing vacuum formed parts and injection molded parts.
• PLM/PDM systems.
• Confluence (a system to store & share information)

Special Requirements

• Must be a creative, passionate and self-driven person with excellent verbal and written communication skills in English, able to clearly document & present ideas, write technical and non-technical correspondence.
• Must be a team player and a hands-on person who is resourceful in getting information from the Internet/libraries or other sources to aid in product development.
• Must have a passion for games is critical as you'll be collaborating with the games development team and contributing to LAI Games products.

Internal/External Relationships

• Internal: work with all functions, especially, R&D, SCM, Manufacturing, Project management. & Quality
• External: Component suppliers and production teams (prototyping, pre- production and mass production).

Qualifications/Education

• Masters or bachelor’s degree holder in mechanical/mechatronics engineering or similar discipline

Besides working with an awesome team, in an arcade, and making games, we also offer:

• Competitive salary
• Performance bonus
• Annual personal technology fund of $1,000 to buy games, toys, and tech
• Training and education programs
• Private medical, dental, and life insurance coverage
• Flexible working hours
• Monthly self-directed personal development days
• Finish work early every Friday afternoon for social drinks and games
• Work in a dynamic, creative arcade/workspace
• Team events - being a part of the out-of-home entertainment industry, we like to have frequent team events and enjoy what the industry has to offer

LAI Games is a global company committed to growing our employees along with the business. We’ve worked hard to foster an intensely collaborative and creative environment, a diverse and inclusive employee culture, and training and opportunities for professional growth.

Research Associate/Assistant (Urban Environmental Sustainability)

The Lee Kuan Yew Centre for Innovative Cities at the Singapore University of Technology and Design is seeking a full-time Research Associate or (Senior) Research Assistant, to join a growing research team focusing on addressing critical urban environmental sustainability challenges.

Successful applicants will contribute to a project that applies a transdisciplinary approach to investigate individuals’ discounting of the impact of climate change in Singapore, and how we can use the everyday shared experience of urban heat to unlock pathways for addressing the inertia towards climate action.

Candidates should possess a strong interest in transdisciplinary research and urban environmental sustainability. Expertise in quantitative research methods and a background in social and/or behavioral science will be a plus.

This position is ideal for individuals interested in pursuing an academic/industry research career.

The candidate will be expected to:

• Conduct and write literature reviews
• Participate in fieldwork and data collection
• Contribute towards quantitative and/or qualitative data analyses
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders
• Support the team in project management of the research (e.g., budgeting, liaising with external collaborators, project administrative duties)

Skills and qualifications required:

• A bachelor’s or master’s degree related to the social sciences, behavioural sciences, or environmental studies
• Demonstrable skills in quantitative and/or qualitative data collection and analysis
• Excellent written and verbal communication skills
• Strong interest or knowledge in urban environmental sustainability
• Strong organizational and data management skills
• Proficiency with statistical software (e.g., STATA, R, SPSS) is a plus

How to apply:

Interested applicants are encouraged to send their application with the subject heading – Research Associate/Assistant (Urban Environmental Sustainability) to [email protected] with the following:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae
• Two writing samples of publication or research work
• Three referees who may be contacted for a reference

We regret that only shortlisted candidates will be notified. Applications will be reviewed and will continue until the position is filled.

On behalf of our client who is an Original Equipment Manufacturer (OEM) in the Building Equipment space, we are looking for Mechanical Design Engineers.

Responsibilities

• Provides technical support to projects, Installation on problem verification, report, and coordinates with Group on job site issues and technical solutions related to mechanical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager

Requirements

• Degree in Mechanical Engineering or diploma with a minimum of 5 years of related experience.
• Proficient in Auto CAD & 3D software is essential

Salary will be offered in accordance with experience and qualification.

Location: East

EA License No. : 22C0971 | EA Reg ID : R21101298

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D AutoCAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

· Position: Interior Design Sales Executive

· Location: Tai Seng

· Working hours: Monday to Saturday (9.30am - 6.30pm)

· Salary (commensurate with experience): Up to $3,500 + ATTRACTIVE Commission + Performance Bonus

· Duration: Permanent

· Industry: Interior Design

Main Responsibilities:

· Manage and follow up clients assigned.

· Provide professional design development and budget consultation to clients assigned.

· Work closely with project coordinator for smooth project management.

· Initiate and plan out the project timeline.

· Sales acquisition for renovation projects. (Qualified leads will be provided)

· Advisory on space planning and design

· Preparation of quotation based on clients’ requirements

· Project management for renovation works including site supervision and project coordination

· Schedule workflow to meet customer move in date.

· Work closely with subcontractors and suppliers to ensure project work smoothly

Requirements:

· Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications

· At least 1 year of relevant sales working experience

· Minimum 'O' Level

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position: Project Executive
• Location: Sims Close
• Working Hours: Monday to Friday (9.30am - 6.30pm)
• Salary (commensurate with experience): Up to $3,500 + Performance Bonus
• Duration: Permanent
• Industry: Design Agency

Main Responsibilities:

• Maintaining and monitoring project plans, project schedules, work hours, budgets and expenditures
• Ensuring project deadlines are met
• Determining project changes and undertaking project tasks as required
• Developing project strategies
• Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project
• Assess project risks and issues and provide solutions where applicable

Requirements:

• Bilingual in English and Mandarin to converse with Mandarin speaking associates
• At least 1 year of relevant work experience
• Competency in Microsoft applications including Word, Excel, and Outlook.
• Ability to work on tight deadlines

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

· Position: Project Coordinator

· Location: Tai Seng

· Working hours: Monday to Saturday (9.30am - 6.30pm)

· Salary (commensurate with experience): Up to $5,000 + Performance Bonus

· Duration: Permanent

· Industry: Interior Design

Main Responsibilities:

· Support Project Manager in project implementation

· Understand and ensure compliance in project requirement and scope of work

· Responsible in counter checking details in drawings for correct dimensions, orientation, alignment upon project executions

· Supervise and lead work of sub-contractors and in-house workers

· Work closely with other site operations staff to meet the project schedule

· Ensure installation is carried out as per drawings and approved specifications

· Monitor the progress and quality of work being performed by workers

· Ensure site safety and ensure that all safety requirements are enforced

· Keep and maintain proper and updated site records on progress of work and report to Project Manager

· Plan and organize manpower or resources allocation

· Perform other duties and tasks as assigned

Requirements:

· Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications

· Diploma or above in Construction Management / Building Studies / Engineering / Architecture related disciplines

· At least 3 years of relevant working experience

· Possess Class 2/2A/2B/3 driving license and own vehicle

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

You will be responsible for the design and development of digital circuit using BiCDMOS process for chip used in automotive, Industrial Battery management system.

You will work within a group of design experts interfacing with layout, overseas design teams to create detailed specifications, innovative designs to meet the technological requirements, achieving sales and ultimately doing our part for empowering electrification of vehicles and enabling Metaverse; contributing to achieve carbon neutrality for our future generations.

Key responsiblities:

• Planning and designing IC block or system architecture based on design requirements
• RTL code level development and simulation verification
• Prepare and discuss circuit, results of design in design reviews
• Support Synthesis, place & route and timing closure of digital circuits
• Design For Testability (DFT); test-modes design
• Check post layout verifications (timing, functional, power consumption)
• Support to one chip designers to integrate total analog and digital one chip design
• Mixed signal simulations and high-level system modeling of analog blocks for one chip verification simulations
• Conduct IC verification on bench to check IC performance with respect to design
• Work with application engineers to support customer application issues

Requirements:

• Good PhD/Masters/Bachelor’s Degree in Electronics/Electrical Engineering equivalent.
• Experience in developing digital circuit proficient in digital design tools usage (Cadence/Synopsys)
• Competent in digital design flow (RTL coding & Simulation, Synthesis, Timing Analysis and Clock Tree Generation, DFT, Place and Route and etc)
• Competent in different digital design tools and languages (VHDL and/or Verilog and etc)
• Knowledgeable in Behavioral Modelling in VHDL/Verilog_AMS will be an added advantage
• Knowledgeable in Mixed-Signal Design and Simulation will be an added advantage
• Silicon debugging skill to solve design issues
• Good communication skills and ability to work in a team
• Preferred 3-5 years of digital IC design experience. Candidate with relevant design experiences will be considered.