JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

We are seeking a talented Bid Manager for our Singapore studio.

In Brief:

● You will lead and manage bids and track major KPIs.

● You will govern and drive RFP Responses, Central repository, Contract coordination, Process Management, Success Programmes and Internal Governance Role.

● You will forecast metrics related to the projects, programs, portfolios, resources, risks, etc.

● You will generate reports for different levels of management to help them make timely decisions.

● You will produce customer facing imagery and designs that convey value propositions, win themes and the solution narrative.

● You will be responsible for creating compelling designs, illustrations and graphics in a variety of formats, including but not limited to: high profile presentations, diagrams, maps, infographics, document design, exhibition and visual materials.

● You are confident in your ability to visualize your concepts and articulate your ideas to clients.

● You are to ensure compliance with required proposal deliverables.

● You are to create and manage a range of document and presentation templates.

● You will work with subject matter experts to turn written, numerical and existing content into compelling graphical representations.

● You will work within corporate brand guidelines.

● You have a minimum of 5 to 7 years of experience in Design/PM background or training. Obtaining Nicmar/PMI certification is an asset.

● You are well versed in advanced desktop publishing software skills such as Photoshop, Illustrator, Acrobat, InDesign, and Microsoft Office + Work on Google Suite

● You have experience in collaborating with diverse, cross cultural and multi-disciplinary teams.

● You have proven skills in producing proposal content within a complex business environment. International experience is an asset.

● You have the ability to work in a deadline-oriented environment without compromising artistic creativity and have the ability to work independently with minimal supervision.

● You have a positive attitude and the ability to work under pressure in a fast-paced environment.

● You will take on a techno commercial role with consciousness to quality.

● You possess a good eye for layout and design and is attentive to details.

● You have good oral and written communication skills.

To find out more visit www.spacematrix.com

Job Responsibilities:

· Responsible for the full set of accounting functions and activities for several companies of the Group, including performing monthly closing reports, bank reconciliations, and schedules.

· Perform AP functions such as ensuring all invoices/staff claims were duly approved by respective department heads, supported with Purchase Orders/Delivery Orders/Service Orders, and any other required documents.

· Responsible for processing payments, preparing payment vouchers and related supporting documents, GL coding, and posting all related payable entries, while also maintaining files for paid and unpaid invoices.

· Handle intercompany billings to ensure accuracy and timeliness in invoicing between subsidiaries.

· Maintain files for paid and unpaid suppliers’ invoices

· Handle intercompany billings

· Assist in updating daily cashbook

· Assist in handle audit, tax and secretary

· Assist in other ad-hoc duties as and when assign

Job Requirements:

1. Min Diploma in Accounting or equivalent.

2. At least 2 years or relevant working experience

3. Familiar with ERP System, preferably Microsoft Navision

4. Able work in fast paced environment and flexible in adapting changes

5. Able work independently with minimum supervision

6. Possess good working attitude and reliable

7. Good communication, interpersonal & organizational skills

8. Good time management and multi-tasking

Both New & Experienced motivated individuals with passion for design and an eagerness to learn are welcome to join our team

• There will be Mentorship for guidance to ensure you have an easy learning and growth
• We are a Long-established Interior Design Company
• If you are someone who value and appreciate Flexible working hours, then do join us

Job Description

• You will be preparing Design Proposal, Presentation for space planning and design conceptualization from client’s requirements
• You will be generating Quotation from client’s requirements
• You are to communicate & provide explanation confidently for any design/renovation process upon client’s query
• You will be converting prospective clients to actual sales
• You will be managing projects to meet project objective and client’s needs
• You will be in charge of the Project management as well as Site supervision of your project

Job Specification/Requirements

Even if you have no prior experience, we welcome you aboard as well, as training will be provided

• Candidates with a minimum Diploma in Interior Design or related & equivalent is preferred but not required
• Willing & eagerness to learn
• Strong communication skill
• Meticulous, great work attitude and self-motivated
• Passion for sales
• Excellent customer relations & service
• Able to work independently and a great team player
• Able to work under pressure
• Able to converse well in English
• Possess flair and creativity in interior design
• Candidates with more than 5 years of relevant experience will be considered for the Senior position

Benefits

• Starting Basic allowance available
• High Commission Rate
• Salaried scheme & Commission-based scheme available
• Sales Performance Bonus / Incentive
• Career advancement opportunity – to be promoted into Team Leader with an overriding commission.
• Direct leads at high-traffic shopping mall [IMM Shopping Mall], well known for interior design service

As our Lead - MEP, You will be leading the MEPF Design for Space Matrix and be aligned to Space Matrix goals and targets of revenue, client acquisitions, client retention through client success and thought leadership.

Specific Responsibilities

• You will be responsible for understanding from the MEP perspective, the client’s key business drivers influencing their decision-making process and how these decisions will play a pivotal role in helping our clients achieve their goals.
• You will be leading and owning the Design activities for MEP vertical and create holistic solutioning to fulfill client’s needs .
• You will be driving the Space Matrix proposition to be most value added/unique for the pitch/proposals.
• You will ensure to create coordinated solutions and work together as an effective team member towards common goals.
• You will lead all the projects as MEP Lead and make sure the project is successful and well within the budget and timeline with highest client satisfaction.
• You will be responsible for the quality of MEP design and will make sure all designs are within the budget.
• You will attend all client meetings to explain the design concept and detailed design. Visit sites as per the project requirement and provide solutions where and when required.
• You will review all drawings in Revit/AutoCAD and prepare BOQ and budget for projects.

• You have a minimum 10 years of experience in the building/ construction industry.
• You have relevant experience in corporate/ workplace projects.
• You are tech-savvy, and have experience in successfully adopting latest technology initiatives.
• You have the ability to work in a fast paced environment without compromising on quality and customer satisfaction.
• You work well under pressure and have the ability to work independently with minimal supervision.
• You will be a subscriber to the Company’s core values: teamwork, integrity and excellence.

To find out more visit www.spacematrix.com

As our Manager Procurement, you will be working directly with the project team on the overall planning and implementation of procurement strategies with respect to the ongoing projects. You will also suggest value engineering strategies in order to improve the cost efficiency while keeping the project deliverables in mind.

In brief

• You will be responsible for negotiating and finalizing the interior fit-outs packages for all ongoing projects.
• You will be responsible for reading from the drawing and BOQ and projecting a cost estimate with respect to interior fit-outs package.
• You will be responsible for following up with the vendors for on time material delivery to meet project deliverables.
• You will be responsible for developing and maintaining vendor network in the region in order to offer continuous expertise in terms for current rates and trends.
• You will have to be knowledgeable of vendors / suppliers and provide support for comparative and analysis in vendor selection as needed.
• You will always be updated in terms of market trends and offer suggestions/ strategies in order to increase project efficiency.

• You have a minimum 6 years of experience in the building/ construction industry.
• You have relevant experience in procurement for fit-outs in corporate/ workplace projects.
• You have the knowledge of individual trades and subcontractors relevant to fit-outs.
• You are tech-savvy, and have experience in successfully adopting digital and technology initiatives.
• You have the ability to work in a fast paced environment without compromising on quality and customer satisfaction.
• You work well under pressure and have the ability to work independently with minimal supervision.
• You will be a subscriber to the Company’s core values: teamwork, integrity and excellence.

To find out more visit www.spacematrix.com

We are seeking a talented Lead Designer - Workplace. You will be part of our design studio designing Corporate / Workplace Interior projects. Working closely with the design team, you will be responsible for developing design concepts for corporate interior projects and leading client presentations/pitches as well as design management and coordination for projects.

In Brief

● You will be responsible for working on strategizing design solutions to fit assigned programs and budgets.

● You will work on multiple projects and provide pre-design services which may include conducting feasibility studies or specifying the requirements the design must meet.

● You will work closely with the design team and manage the development of design successfully from one phase to the next, without compromise to quality, budget, or schedule.

● You will lead and participate in project meetings and Client presentations as needed & working closely with the team, you will be responsible for design management and coordination with project stakeholders as needed.

● You will provide quality control and review design documentation and schedule project team deliverables.

● You will attend Client work-sessions and design reviews as required.

● You will travel for assigned project presentations, coordination meetings and site visits as required.

● You have 10+ years of experience of working on Commercial interior / Corporate Interiors/Workplace design projects & managing a team.

● You have a strong design sensibility and the technical ability to develop a project from concept to execution.

● You are a team player with a positive attitude to go the extra mile.

● You have multi-tasking ability, with time management and organizational skills.

● You have a registered Diploma or Degree in Interior Design or Architecture.

● You have an excellent knowledge of design tools such as AutoCAD, Sketchup and Photoshop.

To find out more visit www.spacematrix.com

Job Description:

• Perform engineering design work, simulation and testing.
• Liaise with contractors, vendors, purchasers on fabrication and component purchase.
• Perform assembly and testing of prototypes
• Support trial testing conducted locally and overseas.
• Prepare technical paper and test report.
• Perform failure investigation and analysis.

Job Requirements:

• Degree in Electrical, Electronics or Mechatronic Engineering
• Possess passion in design
• Innovation, problem solver
• Good team player, positive attitude and committed
• Knowledge in electronics theory
• Experience in C/C++ coding
• Experience in image processing
• Experience in Network Communication
• Able to travel overseas
• Prefer candidate who have a class 3 driving license

Your assignment

• Know and understand the customers’ shopping behaviour, retail trends & life at home and use this knowledge to provide the relevant solutions for our customers

• Ensure that sales and profitability is secured through sales steering and range efficiency to maximise growth

• Know the key barriers and facilitate an easy buying process for my customers.

• Provide feedback to secure commercial opportunities in a multi-channel environment and work actively to help sell in all channels

• Ensure that area of responsibility is in excellent shape as new, fully stocked and that a high level of merchandising basics is always in place.

• Take responsibility to achieve the goals set for my area of responsibility

• Contribute towards improving the customer experience in the store and maintain a high level of service standard with a “First time right” mindset

• Conduct/Support product knowledge trainings for co-workers related to a product range.

• Ensure Balance operational excellence in daily operations to enhance the easy buying experience in line with commercial review requirements

• Support a customer-friendly and efficient execution of the payments, exchange & returns and click and collect process.

Your assignment

• To know and understand the customers’ shopping behaviour, retail trends & life at home and use this knowledge to provide the relevant solutions for our customers;
• To ensure that sales and profitability is secured through sales steering and range efficiency to maximise growth;
• To know the importance and actively work with replenishment proposal- securing the right parameters to ensure product availability ;
• To ensure that my area of responsibility is in excellent shape as new, fully stocked and that a high level of merchandising basics is always in place;
• To contribute towards improving the customer experience in the store and maintain a high level of service standard with a “First time right” mindset;
• To support a customer-friendly and efficient execution of the payments, exchange & returns and click and collect process.

Responsibilities

· Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)

· Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation

· Verify Logic at ISP level and Digital System level

· Optimize Design for less gate count and low power consumption

· Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

· Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience

· Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)

· Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.

· Strong debugging and problem-solving skills

· Good communication and interpersonal skills

· Result oriented and embrace change behaviours

Description

Electrical design engineers are responsible for the drawing creation and modification. The job is to come up with innovative ways to build new or improve existing panel and junction box (JB). Electrical design engineers must have an extensive knowledge of electrical engineering principles in order to do their job effectively. They need to be familiar with electrical components for panel and junction boxes.

Responsibilities

Safety

1. Ensure Workplace in Safe and Healthy Environment.

2. Ensure No Slips, Trips and Falls environment.

3. Maintaining a tidy workspace.

4. To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

5. To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Responsibilities

1. To have and maintain good daily attendance and punctuality.

2. To update team members at least 2 working days in advance before going for leave in order to minimize downtime.

3. Lead Ex Proof Team

Daily Task

1. Daily Update of Project Progress to immediate superior.

2. Weekly report progress

Main Task

1. Ensuring accurate adherence to the client's quotation specifications in the drawing.

2. Daily Update of Project Progress to immediate superior.

3. Weekly report progress.

4. Design and Update Electrical & Instrument system layouts, single line diagrams, control schematics.

5. Equipment/material schedules and data sheets, control wiring diagram for control systems etc.

6. Drafts engineering documents for client’s submission or for construction.

7. Performs electrical calculations on cable sizing, lighting illumination level, cable ladder/tray sizing etc.

8. Preparation of Project Design basis and specification.

9. Preparation of Single Line Diagram.

10. Preparation of Cable and Power Layout, Earthing Layout and Hazardous Area Layout.

11. Basic Technical and feasibility studies based on the process scope of work.

12. Resource Planning for design works.

13. Performs drafting on all engineering and construction drawings as per instructions given.

14. Produces revised or as-built drawings based on mark-ups and instructions given.

15. Other Ad-hoc duties assigned from time to time.

Special Task

1. Lead the Ex-Proof team.

2. Lead to Coordinate and cooperates with other disciplines for documentations to get approval by the Client.

3. Preparation of Template for Internal Components Drawings

Requirements

· Preferably Degree in Electrical Engineering or equivalent and above

· Preferably minimum 3 to 10 years of design experience in Schematics & Layout design (including library design), Cable Assembly Design, and Design documentation.

· Preferably Proficient with MS Office Program, AutoCAD

· Preferably Knowledge on designing in 3D layout will be an advantage.

· Proficiency in English (written and oral skills) is a must.

· A responsible, self-motivated, meticulous and resourceful team player with good organizational and communication skills.

· Ability to multi-task and work independently in a fast-paced environment.

· Excellent problem solving and time management skills.

· Familiar with Code of Practices, electrical design, electrical calculations

We are looking for a Design Manager for our Engineering department.

Responsibilities

• Lead the works in accordance with site specific HSEQ Construction Methodologies, Risk Assessments, Site Rules and Keller Policies and Procedures.
• Understand and manage clients' requirements and their obligations in the development of a building design.
• Liaising positively & actively with clients, consultants & authorities using his/her technical expertise to adopt / accept / approve the technical proposal for the projects.
• Ensure the design process recognises current legislation, standards and codes of practice.
• Ensure the design information is of the right quality and keeps pace with project timescales.
• Strive to eliminate health and safety risks in the design and financial risks during construction.
• Preparing detailed investigation report for any incidents related to technical issue.
• Review with the Business Development team on project closing reports and develop future improvement plans / strategies to reduce risk(s).
• Be involved in society work, including writing papers to seminars.
• Design D&B solutions, including solutions for ground improvement where relevant.
• Lead, develop and provide training to the team of Engineers.
• Provide technical marketing of solutions to clients and consultants.
• Conduct regular site visits to train and create buy-in from site personnel to promote quality and good practices.

This role may require travel to overseas offices to participate in global expertise groups occasionally.

Requirements

• PEB-recognised bachelor's degree in Civil Engineering or higher.
• At least 10 years experience in a geotechnical design role in the construction industry.
• Experience with PLAXIS will be advantageous.

What We Offer

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

The School of Mechanical and Aerospace Engineering (MAE) is one of the top 7 mechanical and aerospace engineering schools in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work. We invite highly qualified candidates in the following expertise areas to join its dynamic team of faculty.

• Smart Engineering Design and Innovation

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Relevant industry experience with a passion for education
• Expertise in the following areas, design informatics, smart product design, artificial intelligence in design, virtual product development, intelligent design ontology, design for the flexible adoption of new technologies, design automation for digital manufacturing and digital twins, will be advantageous.
• An excellent teaching record at either undergraduate or graduate levels
• Track record of translational research work with industry relevance would be preferred.

Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track would also be expected to acquire research funding and conduct research.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

To Apply:

• Applicants are invited to submit their applications (cover letter and CV) through the NTU career portal, https://ntu.wd3.myworkdayjobs.com/en-US/Careers/job/Assistant-Professor-in-Smart-Engineering-Design-and-Innovation_R00011873-1

We are looking for a Senior Geotechnical Design Engineer with at least 4 years’ experience in geotechnical design, analysis and writing technical proposals. The Senior Geotechnical Design Engineer should also be proficient in the use of Plaxis 2D and 3D, as well as in their knowledge of soil mechanics.

Reporting to the Design Manager, you will have the opportunity to collaborate with the Business Development Team to provide design support for tenders. You will be expected to review tender specifications, requirements and draft the technical proposals. Likewise, you will be working closely with the Operations team to perform design-related coordination work, analysing geotechnical issues at project sites, and preparing detailed drawings for the site team. Finally, you will be expected to guide and train junior engineers.

To be successful as a Senior Geotechnical Design Engineer, you should be independent, demonstrate strong analytical thinking and be able to have prompt, open and direct communications with internal and external stakeholders to achieve project expectations. Outstanding candidates should be meticulous, detail oriented, demonstrate willingness to learn and display a positive attitude with a drive for results.

Think you’ve got what it takes?

A day in the life of Senior Geotechnical Design Engineer

Design support for tenders:

• Review and summarize soil condition reports, tender specifications and requirements.
• Identify and summarise geotechnical problems and technical risk.
• Analyse geotechnical problems and draft technical proposal.

Design-related coordination work for ongoing projects:

• Perform analysis and design in accordance with current legislation, standards and codes of practice
• Guide and train junior engineers
• Prepare detailed construction drawings with the assistance of draughtsperson.
• Conduct regular site visits to integrate design concept and actual ground conditions.
• Quality Control (QC) review and verification between design assumptions and actual site conditions.
• Carry out geotechnical analysis and design using tools such as Slope/W and Plaxis as well as Keller’s in-house software.
• Conduct back analysis and research for future improvement based on actual performance and as-built data.
• Prepare technical proposal for remedial work during construction when required.
• Liaise with clients/consultants/ sub-contractors on technical related issues.

Note: This role requires candidates to perform regular site walks at outdoor construction sites

You will need:

• A professional degree in Civil or Geotechnical Engineering
• At least 4 years of relevant working experience in Geotechnical Engineering
• Proficiency in Microsoft Office (Excel, Word, Powerpoint), AutoCAD, Plaxis 2D and Plaxis 3D
• A valid Supervise Construction Work for WSH certificate (preferable)

What We Offer:

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Daily duties involves (but not limited to)

Design the new product as per the client requirement (SS / MS / Aluminium)

Ensure the laser machine schedule is followed as per the client / company requirement

Mantain the laser machine, bending machine, other machineries to its standard

Knowledge in laser machine is a MUST qualification to apply this job

- Bachelor degree in Civil Engineering

- 5+ years in design of pump system solutions, sanitary and plumbing solutions

- Soft skills - MS word, email, Acad

- Client handling and progress claims

- Liaision with sub-contractors

- Handling work crew

- Preparation of proposals and submission to client

- Sincere and dedicated candidate

Responsibilities & Requirements

· Engineering or Diploma with minimum 5 years’ experience in Mechanical Engineering

· Minimum 3 years’ experience in handling engineering drawing

· Software Skill: 2D knowledge in AutoCAD, and 3D knowledge in Solidworks

· 2-3 years’ experience in sheet metal development and fabrication knowledge

· Knowledge in various process for component making

· Understanding bill of material as stated in assembly drawing

· Knowledge in various material and its manufacturing ability

· Project follow up with production team

· Work with different department to follow up process to end product

· Strong organizational skills

· Excellent attention to detail

· An abundance of patience to see a complicated project to end

· Ability to think in a three-dimensional manner

· Comfortable with sitting for long periods of time

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilities:

• Structural design and checking; submission of structural drawings and liaise with government authorities; co-ordinate with site project teams; attend site meetings with clients and contractors.

• Assist Director or Senior Engineer on reviewing and provide solutions to technical problems as well as plan, monitor and report work progress of the construction/project.

Requirements:

• We need Junior and Mid-level Engineer to fill up the positions.

• Minimum 3 to 5 years of relevant working experience in consultants office.

• With Knowledge in Euro Code

• Min. Degree in Civil Engineering recognized by P.E.Board

• Effectively bilingual

• Be familiar in Prokon, Orion, TSD, Etabs, ZWCad softwares will be an advantage.

• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.

Interested candidates, please send your resumes online with the following details:

• Availability & related work experiences

• Current/last drawn salaries

• Expected salary

• Position applied for

We regret that only short listed candidates will be notified