- Plan, coordinate and execute projects in interior fit out works (Commercial - Shopping Centre)

- Must have experience in handling F&B projects in the past.
- Good experience in project management and scheduling
- Ability to understand drawing

- Basic knowledge in M&E works will be an advantageous

- Certificate/ diploma in any of the following relevant field such as Architecture, interior design, project management

Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

About audax

audax means courage. To have the courage to change the banking scene, eliminating constraints caused by existing legacy infrastructure. Our mission is to empower banks and financial institutions to scale and modernise at speed, reaching new customers without breaking the bank.

We began our journey supplying services to and powering Standard Chartered’s white-label plug and play Banking-as-a-Service (BaaS) solution, Standard Chartered nexus, through our technology capabilities. At audax, we seek go-getters who are hungry for growth and can bring fresh perspectives.

Website - https://www.audax.io

What you will be doing:

We are seeking a skilled UI/UX Lead Designer with hands-on experience to drive the design strategy for web portals while providing consultancy for mobile design within our Banking-as-a-Service (BaaS) product. This role emphasizes crafting intuitive and accessible digital experiences for web platforms while aligning mobile designs with the principles of our UI-less SDK.

Responsibilities:

• Develop and execute user experience strategies tailored to web portals, aligning with organizational goals and user needs.
• Conduct user research and usability testing to gain insights and validate designs for web platforms.
• Design wireframes, prototypes, and high-fidelity mockups, maintaining visual consistency and usability standards for web portals.
• Stewardship of cross-platform (web and mobile) design system, maintaining visual and UX consistency/standards.
• Advocate for accessibility and inclusivity by ensuring designs comply with WCAG guidelines and meet diverse user needs.
• Collaborate with cross-functional teams to define design requirements, present concepts, and ensure alignment with business objectives.

What you need to be successful in this role:

Mandatory Skills

• Bachelor’s degree in design, HCI, or related field
• Certifications in Interaction Design or Usability testing
• Minimum 6 years of hands-on UI/UX design experience, with a strong focus on web portals/ apps. Experience in fintech, BaaS, or enterprise platforms is a plus.
• Proficiency in Figma: Expertise in creating wireframes, prototypes, and high-fidelity designs, including collaborative workflows and design system creation.
• Accessibility Standards Expertise: Strong understanding of WCAG compliance to design for inclusivity across mobile and web platforms.
• Design System Development: Proven experience in developing and maintaining scalable design systems for web portals and mobile consultancy.
• HTML, CSS Fundamentals: Basic hands-on knowledge of front-end technologies to ensure seamless collaboration with developers.
• User-Centered Design Principles: Demonstrated ability to design intuitive, user-friendly web interfaces aligned with usability best practices.
• Familiarity with Agile principles and methodology, integrating design processes into sprint cycles and iterative development.
• Strategic Collaboration: Strong ability to work seamlessly with cross-functional teams, articulate design concepts effectively, and influence decision-making.
• Creative Problem-Solving: Innovative and user-centered approach to address complex design challenges while aligning with business goals.
• Time Management & Adaptability: Skilful in prioritizing tasks and delivering high-quality outcomes in dynamic, fast-paced environments.

Desired Technical Skills

• Cross-Platform Design Knowledge: Understanding design nuances for both web and mobile platforms, guiding mobile consultancy where needed.
• Usability Testing Tools: Experience with tools like Maze or Optimal Workshop for conducting user testing and gathering actionable feedback.
• Prototyping Skills: Advanced abilities to demonstrate complex user interactions and flows through interactive prototypes.
• Animation Skills: Experience with 2D animation in After Effects and export using BodyMovin/Lottie.
• Agile Design Integration: Proficiency in embedding design workflows into Agile frameworks, including sprint planning and iterative cycles.
• Front-End Collaboration: Basic knowledge of JavaScript or React to facilitate efficient design-to-development handoff.

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Job Summary

We are looking for enthusiastic Media Design & Production Interns who are looking to broaden their knowledge and skills in developing creative visuals and interactive media for executing branding strategies and marketing campaigns.

You will be involved in Bizsquare's and our clients' design and branding projects, as well as content marketing initiatives to drive traffic, engagement and leads, with the ultimate goal of increasing brand awareness and lead generation.

Responsibilities and Duties

• Design work for brand visuals and social media content

• Media production work like photography/videography and editing for branding & marketing collaterals

• Develop content marketing and brand strategies to reach out to the targeted audience using all marketing channels like website and social media etc.

• Create new ideas for campaigns to support brand awareness and lead generation efforts

Requirements

• Proficient in Adobe Photoshop/Illustrator and Adobe Premier Pro

• Able to adhere to milestones and deliverables, strong time management skills

• Creative mindset and has a flair in design

• Self-motivated and independent

Archangel Digital Studios is a dynamic and innovative digital marketing agency based in Singapore. With a passion for excellence and a focus on creativity, we aim to redefine the standards in the industry.

As a Social Media Design Intern working with the marketing team, you will be required to create visuals and assets for advertising, emailers, social media, flyers, banners and more, as well as bring fresh and creative ideas to the table.

The place of work will be from home.

Responsibilities:

• Graphic design
• Create creative content for marketing collaterals such as flyers & emailers
• Design posts for social media & advertising
• Keep up to date with industry changes and the latest in social media design

Requirements:

• Diploma, degree or experience in design
• A keen eye for aesthetics
• Highly motivated and proactive
• Able to turn around designs quickly
• Able to work independently, methodically and meet deadlines
• Experience with Web Development platforms WIX, WordPress & Shopify advantageous but not required

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Physical Design Engineer (Digital IC)

Job Description：
1. Works with the senior physical design team to complete the chip floorplan , clock architecture, and powerplan .
2. Involved in one or more physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.
3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:
1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science
2. 0 - 5 years of work experience in the digital backend design field. (Fresh graduates can be considered).
3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.
4. Willing to work in a new start up entity in Singapore

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Deliver sub-assemblies to production on time, cost and to specification.
• Develop detailed specifications and design requirements for interdependent systems
• Identify and design test requirements to replicate anticipated usage and optimise products to be robust and high performing.
• Build functional prototype products suitable for testing, review and demonstration
• Perform and review analysis on test failures and develop efficient solutions
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

• A degree in a relevant Engineering or Science discipline or equivalent
• 4+ Years of experience in a relevant role, working on complex and challenging technical problems
• A creative and considered approach to problem solving, following clear design processes
• A practical and methodical approach to design using an iterative development cycle of prototyping and testing
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team and across a business
• A demonstrable desire to constantly improve yourself including evidence of self-development
• Knowledge and understanding of a broad range of manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

My client is a well established C&S consultant firm in town.

Multi-disciplinary consulting civil and structural engineering services.

Responsibilities:

• Carry out comprehensive analysis and design works for complex and large scale projects.
• Perform analysis and design for the project
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Assist QP/Project Lead in managing project stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants.
• Work independently in analyses, design, submissions, construction support and coordination works.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• With working experiences in Singapore on structural engineering projects.
• Minimum structural design experience 5 years.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Knowledge in temporary works, ERSS will be an advantage.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Responsibilities:

• Work as a team leader. Overall control the entire Design Department.
• Preparing Shop drawings, tender drawing, fabrication drawings, cutting list etc. 3D drawings. Monitor and control the progress and quality of drawings provided by the whole team.
• Attend meetings related to tender, design discussion, design optimization, critical design resolutions.
• Liaise with Client, Main Contractor, Architect and Consultants for design & technical issues.
• Oversee fabrication work and overall project coordination. Provide technical support and guidance to the project team on site.
• Stay updated with the latest industry trends and technologies in aluminium facade design
• Report to the Director.

Requirements:

• At least 6 year experience in Alum and Glazing Design design works.
• Responsible, with good organizational and communication skills. Able to work as a team leader.
• Strong understanding of building codes, standards and construction techniques
• Excellent attention to detail, problem-solving and communication skills
• Bachelor’s degree in architecture, Engineering or a related field and above.
• Singapore Citizen and Permant Residence are preferred. (Foreigners with relevant experience will also be considered)

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Position: Management Executive
Company: The Design Factory
Location: Singapore
Salary Range: SGD $4,000 - $6,500 per month
Employment Type: Full-Time

About Us

We are a dynamic and innovative interior design firm dedicated to transforming spaces and creating exceptional experiences for our clients. As a growing company, we are seeking a talented and driven Management Executive to join our team and contribute to our continued success.

Job Description

As a Management Executive, you will play a critical role in ensuring the smooth operation and strategic growth of our firm. Your responsibilities will include:

1. Operational Management: Oversee daily business operations, including resource allocation and workflow optimization. Develop and implement efficient processes to enhance productivity and project delivery.
   
2. Client Relationship Management: Act as a key point of contact for clients, ensuring exceptional service and satisfaction. Assist in client presentations, meetings, and follow-ups.
   
3. Project Coordination: Collaborate with design teams to ensure project milestones and deliverables are met.
   Monitor project timelines, budgets, and quality standards.
   
4. Team Support: Assist in recruiting, onboarding, and training staff as needed.
   Provide administrative support to senior management.
   
5. Strategic Development:Contribute to the development and execution of business strategies to achieve organizational goals. Analyze market trends and assist in identifying growth opportunities.
   

Requirements

We are looking for a candidate who possesses the following:

• Education and Experience: A diploma or degree in Business Management, Interior Design, or a related field.
  At least 3 years of relevant experience in management or a related role.
  
• Skills and Competencies: Strong organizational and multitasking skills with a detail-oriented mindset.
  Excellent communication and interpersonal abilities.
  Proficiency in MS Office Suite and project management tools.
  Familiarity with the interior design or construction industry is a plus.
  
• Personal Attributes: A proactive and solution-driven attitude.
  Strong leadership capabilities and the ability to work effectively in a team environment.
  Creative problem-solving skills and adaptability in a fast-paced setting.

What We Offer

• Competitive salary commensurate with experience.
• Opportunities for career growth and professional development.
• A collaborative and vibrant work environment.
• Exposure to high-profile projects in the interior design industry.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

DESIGN ENGINEER

Prepare structural design calculations to comply with Eurocode

Computer literacy and able to operate Revit & Autocad Drafting Solution

BIM/Revit experience

Able to work as a team with other engineers and draftsmen

Report to Senior Design Engineer / Manager / PE

Attend project / site meetings

Regular visit site to check on the structural work

Assist PE with inspection works and to prepare reports