Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

You will be a key product developer for our Counter-UAS products for the local and overseas markets. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a product development team to design and develop our RF sensing and jamming products as part of the Counter-UAS product lines.

Be Part of Our Success

· Plan, execute, monitor, and control the various RF designs of the products

· Well verse in RF link budget calculation

· Specialized in software defined radio technology to design, develop and optimized RF frontend systems for SDR applications

· Proficient with tools such as MATLAB, GNU Radio and SPICE simulator and other electromagnetic simulation software packages

Qualities We Value

· Experience in Windows server OS, Unix/Linux OS & VM environment

· Experience in product development

· Good knowledge with SDR, RF receiver and power amplifier designs

· Strong interpersonal and communication finesse

· Proactive problem-solving prowess

· Ability to adapt to evolving technologies and industry best practices

· Singaporean Only

· Location: Jurong East

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

· Responsible for preparing and modifying schematic, detailed, and production drawings for precast concrete components, steel moulds, and reinforced concrete (RC) structures.

• Responsible for creating 2D and 3D presentations and design drawings, while developing solutions to technical and design challenges in compliance with Singapore's established standards.
• Responsible for compiling data and performing basic design computations.
• Participate in client liaison, authority consultations, coordination with consultants and subcontractors, and attend design and construction meetings.

Requirements:

• Diploma or Degree in Civil Engineering
• At least 5 years of related working experience
• Experience in checking Precast Concrete Shop Drawings and working with Precast Concrete Supplier Design Team

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)

Design and Marketing Executive (Fashion Design - Work Uniform)

• Working Days: Monday – Friday (9am - 6pm)
• Working Location: Tai Seng
• Salary: $2500 - $4000 + AWS + Performance Bonus

Design Job Scope:

• Mood boards, design development and presentation.
• Design and fabric research, sourcing, preparing prototype and prototype development.
• Create technical drawings for sampling and presentation.
• Liaise with relevant parties on development and construction.

Marketing Job Scope:

• Assist Manager in campaign planning, execution and all marketing related matters
• Manage external vendors for SEO, SEM strategies
• Propose and plan all relevant social media and digital content calendars aligned to the Marketing Calendar (IG, Linkedin etc.)
• Manage, create and copywriting work of all marketing materials including product catalogues, corporate presentation, promotional flyers, advertising materials, etc.
• Be involved with photography for all social media platforms and keep websites up to date
• Keep current and abreast on all digital content trends and conduct market research and competitor analysis
• Assist to coordinate and liaise with media to secure brand exposure and relevant partnerships
• Manage all product related information update on website
• Weekly & monthly report analysis for campaigns and engagement
• Any ad-hoc duties as assigned

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Project Executive

• Working Hours: Monday-Friday [9am - 6pm]
• Location: Kallang
• Salary: $2,500 - $3,000 + Performance Bonus

Requirements:

• Diploma in any industry

Jobs Scope:

• Prepare plan drawing and 3D drawing using AutoCAD
• To do colour scheme confirmation
• To tick off quantity of layouts
• Placing order for projects
• Prepare handover material/checklist for handover
• Prepare Master programme and ensure work progresses in accordance with schedule
• Coordinate all aspects of the project works with client, consultants and subcontractors
• Inspect work in progress on site to ensure quality is in compliance with drawing
• Attend site and coordination meeting
• Ad-hoc administrative tasks

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Job Summary:

• Location: North East
• 5 Days Work (Mon - Fri)
• Experience in Commercial / Renovation / Interior Design preferred

Job Scope:

• Ensure timely and high-quality execution of assigned projects according to specifications and client expectations.
• Manage subcontractors and suppliers to ensure on-time delivery within project budgets while maintaining quality standards.
• Develop and maintain project schedules and timelines to ensure projects are delivered punctually.
• Conduct project meetings as necessary for issue resolution and progress updates.
• Manage change requests, informing all stakeholders and mitigating any impacts on schedule and budget.
• Handle project transition periods, effectively managing client expectations.
• Supervise onsite setup to ensure adherence to quality standards, safety protocols, and timely completion as required.
• Administer Permit-To-Work processes and related documentation such as Risk Assessments and Safe Work Procedures.
• Source subcontractors, suppliers, and materials as needed for project requirements.

Job Requirements:

• Prior experience in managing interior fit-out projects, specifically in commercial office design and build will be an advantage
• Strong team player with excellent interpersonal and communication skills.
• Comfortable working dynamically in a fast-paced environment.
• Ability to manage multiple projects concurrently, depending on size and scope.
• Proficiency in Microsoft Project, Word, PowerPoint, Outlook, and Excel.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Senior Design Engineer

5 days
9am-6pm
25 Kallang Ave, Singapore 339416
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Bayes is representing a European Facade-Major on key hires as they scale-up their business across South-East Asia. We are presently seeking a Facade Design Manager as part of their hiring plans.

• Develop and deliver comprehensive technical presentations on façade performance during the concept stage.
• Support the preparation of detailed façade tender packages, ensuring accuracy and completeness.
• Demonstrate a solid understanding of design principles across a variety of materials and systems.
• Lead internal drafting teams to enhance productivity and technical expertise, including reviewing shop drawings and cutting lists.
• Identify and resolve unforeseen interface issues during different phases of design.
• Provide strong leadership by professionally managing team members, assigning tasks, and offering guidance to improve drafting efficiency.
• Oversee drawing submissions, ensuring adherence to tight schedules and timely delivery in line with agreed project timelines.

Requirements:

• Minimum 4-7 years of relevant experience in Facade Design Engineering for Facade/Building-Systems industry
• Local construction knowledge and authority-submission standards/requirements
• Ability to independently provide advisory, design management and construction-management for Facade-related responsibilities

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Job Summary

The job holder (2 years contract) reports to Director CDLT and is part of the management team that evaluates emerging pedagogy and technology related to education including implementing viable technological tools to enhance teaching and learning.

The job holder will work closely with both internal and external stakeholders to ensure that the curriculum and content development are developed successfully, and any learning technology adopted are with continuity through the provision of training, and the creation of self-help resources for users to enhance learning and good learner academic performance.

The job holder is expected to work from 8.30 am to 6.00 pm on weekdays and may be required to work over the weekends and Public Holidays to support MENDAKI’s events. Although the job holder is largely expected to work in an indoor environment, he is also expected to travel frequently for meetings.

Key Responsibility Areas

Curriculum Development

• Design and manage development of innovative, outcome-focused curriculum materials aligned with educational objectives and industry standards.
• Collaborate with subject matter experts to ensure curriculum content is current, engaging, and pedagogically sound.
• Recommend and integrate the learning technologies, including Learning Management Systems (“LMS”) and other educational tools, to enhance curriculum delivery and students’ engagement.
• Manage all instructional designs, employing evidence-based practices to create effective learning experiences.
• Manage the development of multi-media elements, including graphics, videos, and interactive components, to enhance instructional content with graphic and video developer.
• Stay abreast of emerging technologies and trends in educational technology to inform strategic decision-making and evaluate the pedagogical affordances.
• Manage storyboards and prototypes to outline the flow and structure of instructional content.
• Ensure curriculum designs are based on feedback and usability testing to enhance the learning experience.
• Make data-driven decisions to continuously improve curriculum content and delivery methods.
• Check that all multi-media elements are integrated seamlessly into the overall instructional design.
• Collaborate with cross-functional teams, including educators, technologists, and administrators, to ensure seamless integration of technology into the curriculum.

b. Curriculum Review & Evaluation

• Establish and enforce quality assurance processes for curriculum and instructional design, ensuring a high standard of excellence in educational content.
• Manage needs assessments to identify gaps in knowledge and skills and determine the most effective instructional strategies to address them.
• Conduct regular assessments and evaluations to measure the effectiveness of instructional materials and technology tools.
• Ensure that curriculum materials and learning technologies comply with relevant educational standards, regulations, and accreditation requirements.
• Collaborate with stakeholders to gather input and feedback for continuous improvement.
• Utilise data analytics to assess the impact of curriculum and learning technology on students’ learning outcomes.

c. Competency Development

• Develop and implement professional development programmes for educators and instructional designers, focusing on the effective use of learning technologies and best practices in instructional design.
• Communicate effectively with stakeholders, providing updates on curriculum development and learning technology initiatives.
• Conduct training sessions for educators and administrators on the effective use of learning technologies and newly developed curriculum materials.
• Mentor and guide instructional designers in the development of engaging and interactive instructional content.
• Participate in or lead special projects as required.

d. Team Management

• Effectively lead,motivate, and managethe staff underhis charge and foster a positive work environment.
• Delegate responsibilities, set performance indicators, and conduct performance evaluations to ensure the Team's success in meeting organisational objectives.
• Manage the budget for curriculum development and learning technology initiatives, optimising resources for maximum impact.

Requirements

• 8 - 10 years of related curriculum development, instructional design and learning development experience as well as learning technology.
• Experience with LMS and tools for learning (e.g.Articulate 360, Google Suite).
• Preferably had a master’s degree in MA (Instructional Design & Technology) or MEd (Learning Sciences & Technologies) or equivalent.
• Good understanding of youth, educationand working landscapes.
• Proficient knowledge of instructional design and current learning pedagogies and technologies.
• Strong interpersonal skills and the ability to manage stakeholders across different levels.
• Effective persuasive communication.
• Team leadership skills.
• Sound decision-making and problem-solving skills.
• Ability to multi-task.
• Strong projectmanagement skills.

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

FACULTY OPENINGS AT THE SINGAPORE INSTITUTE OF TECHNOLOGY

The Singapore Institute of Technology (SIT) is Singapore’s first University of Applied Learning, offering industry-relevant degree programmes that prepare its graduates to be work- and future-ready professionals. Its mission is to maximise the potential of its learners and to innovate with industry, through an integrated applied learning and research approach, so as to contribute to the economy and society.

The university’s unique pedagogy integrates work and study, embracing authentic learning in a real-world environment through collaborations with key strategic partners. Its focus on applied research with business impact is aimed at helping industry innovate and grow. Targeted to be ready in 2024, SIT’s centralised campus within the larger Punggol Digital District will feature a vibrant learning environment where academia and industry will be tightly integrated with the community. SIT espouses an applied learning approach and offers degrees with a strong focus on science and technology. Our faculty work closely with industry on translational research and innovation, as well as provide consultancy on solutions to industry challenges. This well-established nexus with industry endows our graduates with deep skills and work-ready training experience – attuning them to the needs and demands of the future economy.

As a young university, we encourage innovation, and seek the right candidates to join us in realising our vision. We offer competitive remuneration, generous employment benefits, access to funding to undertake research of relevance to industry, and opportunities to inspire and nurture the next generation of skilled and work-ready graduates. We currently have positions available at all levels, from Lecturer to Full Professor, in the following areas:

• Accounting: Financial Accounting
• Air Transport Management: Airlines Management, Airport Management
• Digital Communications & Integrated Media: Digital Web Analytics, Integrated Media Management, Digital Media Production
• Hospitality Business: Digital/Interactive Marketing, Data Analytics, Information Technology

Successful candidates will join the Business, Communication and Design (BCD) Cluster (one of five academic clusters in SIT) as members of a team of accomplished experts who are passionate about higher education and deeply involved in industry transformation through applied research programmes.

Faculty in the BCD Cluster undertake funded industry-relevant research, teach courses in Accounting, Air Transport Management, Digital Communications & Integrated Media, and Hospitality Business, as well as supervise industry masters and doctorate students in relevant topics. They are also provided paid leave to undertake consultancy work with industry and/or spend time attached with industry.

We will prioritise collegial and team-spirited candidates with either (a) an earned Ph.D. or equivalent from a reputable university with specialisation in any of the above-mentioned areas and some relevant work experience, or (b) extensive industry experience with demonstrated strong technical expertise in the above-mentioned areas.

Regional Operation Manager

• Working Days: 5 Day Work Week including weekends
• Working Hours: 10am - 6pm / 10am - 8pm
• Location: Orchard (Paragon)
• Salary: $6,000-$8,000 + overriding commission

Requirements:

• Knowledgeable in various business processes (finance, HR, procurement, operations, etc.).

• 3-5 years of retail experience with a strong background in planning and budgeting.

• Minimum 2 years of team management experience.

• Bachelor’s degree in Business Management or related field.

Jobs Scope:

• Ensure the smooth daily operations of our stores, aligning with our company's vision and mission.

• Expand brand awareness and sales channels in both B2B and B2B2C segments. • Design and execute growth strategies for the next 1-10 years, evaluating financial performance regularly.

• Devise plans for team execution, set policies, and maintain yearly budgets and expenses.

• Optimize employee productivity and professional development, including leadership hires at the front of the house.

• Collaborate with cross-functional teams to outperform in merchandise performance, visual display, sales, and pipeline management.

• Lead discussions with the finance team to ensure business profitability and effective cash flow management.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Project Supervisor

• Working Hours: Monday-Friday [9am - 6pm]
• Location: Kallang
• Salary: $3,000-$4,200

Requirements:

• Minimum 3 years of experience as a Project Supervisor or in an equivalent role within the construction or interior design industry.
• Strong working knowledge of construction methods, materials, and building regulations.
• Proficient in Microsoft Office; AutoCAD knowledge and other software skills will be an advantage.
• Valid construction supervisor or project management certification is highly desirable.

Jobs Scope:

• Coordinate and oversee all on-site activities to ensure timely completion of projects within budget and to the highest quality standards.
• Prepare the master program and ensure work progresses according to the schedule.
• Conduct regular site inspections to ensure work quality aligns with project drawings and specifications.
• Coordinate project works with clients, consultants, subcontractors, and other trades.
• Manage the delivery, setup, and handover of projects, including mock-ups at site locations.
• Supervise a team of skilled tradesmen, subcontractors, and vendors to ensure efficient workflows.
• Liaise with internal stakeholders from Sales and Business Development to support project leads through to completion.
• Attend site coordination meetings and provide progress updates to the project manager and client.
• Handle pre-sales and post-sales support, including corporate client inquiries and project billing to collection.
• Prepare handover materials, checklists, work orders, and payment invoices for in-house subcontractors.
• Maintain detailed project records and documentation.
• Attend to post-project defect services and conduct site surveys for existing projects to report on-site conditions.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Looking for a fun Interior Drafter to join our young and energetic environment!

Ready to bring luxury designs to another level? With our company expansion, we are looking for Interior Designers to join our family!

If you see things creatively and dare to create dreams into reality, here's where you should go.

We strongly believe on a flexible and family-like working environment.

Responsibilities:

• Develop AutoCAD and 3D visuals perspective rendering and layout plans with detailed specifications.
• Assist and work closely with inter-department teams.
• Develop and execute high-quality interior design concepts including mood boards and layout plans.
• Draft and prepare layout drawings.
• Able to manage multiple projects at one time.
• Create and upload interior walkthroughs using motion graphic software (Chinese software KuJiaLe will be a plus!).
• Collaborate with sales, contractors and project managers on projects.
• Any other ad-hoc duties assigned by the manager.

Requirements:

• Higher Nitec / Diploma in Interior Design or ID Architecture.
• Knowledge in 2D & 3D design (AutoCAD, 3Ds MAX / SketchUp Pro / Kujiale / InDesign/ Illustrator/ Photoshop) is a plus.
• Minimum 1 to 2 years of relevant experience as an Interior Designer, space planning from concept to implementation stage for residential to commercial.
• Knowledge of the design process, including M&E and detail construction / shop drawings, colour & materials, furniture and carpentry systems, specifications, and detailing will be a plus.
• Excellent interpersonal and communication skills, self-motivated, hardworking, willing to work independently and as a team.
• Able to work in a fast-paced environment and work under pressure.

Interested candidates,

What's Next?

1. Prepare a portfolio of previous works.

2. Send in your resume to [email protected].

Only shortlisted candidates will be notified.

1) RESPONSIBILITIES

- Act as the primary point of contact for DC Consultants and selected DC Key Accounts, collaborating internally to champion customers’ needs and drive outcomes.

- Create mapping for individual DC Consultant and regularly track progress.

- Actively promote Hoppecke DC solutions to increase market awareness and acceptance.

- Position Hoppecke’s DC solutions as primary offerings in DC Consultants & customers’ designs.

- Expectation to specify on design level (pre-tender).

- Provide prompt technical support to DC consultants or customers during the project process.

- Liaising with product/technical/back-office teams from factories, regional technical team.

- Work closely with the Sales Team on deal capture.

- Feedback on competitions solutions updates in the market.

- Regularly update activities via CRM platform (Sales force) to track opportunities pipeline.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

FACULTY OPENINGS AT THE SINGAPORE INSTITUTE OF TECHNOLOGY

The Singapore Institute of Technology (SIT) is Singapore’s first University of Applied Learning, offering industry-relevant degree programmes that prepare its graduates to be work- and future-ready professionals. Its mission is to maximise the potential of its learners and to innovate with industry, through an integrated applied learning and research approach, so as to contribute to the economy and society.

The university’s unique pedagogy integrates work and study, embracing authentic learning in a real-world environment through collaborations with key strategic partners. Its focus on applied research with business impact is aimed at helping industry innovate and grow. Targeted to be ready in 2024, SIT’s centralised campus within the larger Punggol Digital District will feature a vibrant learning environment where academia and industry will be tightly integrated with the community. SIT espouses an applied learning approach and offers degrees with a strong focus on science and technology. Our faculty work closely with industry on translational research and innovation, as well as provide consultancy on solutions to industry challenges. This well-established nexus with industry endows our graduates with deep skills and work-ready training experience – attuning them to the needs and demands of the future economy.

As a young university, we encourage innovation, and seek the right candidates to join us in realising our vision. We offer competitive remuneration, generous employment benefits, access to funding to undertake research of relevance to industry, and opportunities to inspire and nurture the next generation of skilled and work-ready graduates. We currently have positions available at all levels, from Lecturer to Full Professor, in the following areas:

• Accounting: Financial Accounting
• Air Transport Management: Airlines Management, Airport Management
• Digital Communications & Integrated Media: Digital Web Analytics, Integrated Media Management, Digital Media Production
• Hospitality Business: Digital/Interactive Marketing, Data Analytics, Information Technology

Successful candidates will join the Business, Communication and Design (BCD) Cluster (one of five academic clusters in SIT) as members of a team of accomplished experts who are passionate about higher education and deeply involved in industry transformation through applied research programmes.

Faculty in the BCD Cluster undertake funded industry-relevant research, teach courses in Accounting, Air Transport Management, Digital Communications & Integrated Media, and Hospitality Business, as well as supervise industry masters and doctorate students in relevant topics. They are also provided paid leave to undertake consultancy work with industry and/or spend time attached with industry.

We will prioritise collegial and team-spirited candidates with either (a) an earned Ph.D. or equivalent from a reputable university with specialisation in any of the above-mentioned areas and some relevant work experience, or (b) extensive industry experience with demonstrated strong technical expertise in the above-mentioned areas.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities:

• Supervise the administration of tender and contract documents.
• Manage the process of quantification, subcontractor and supplier sourcing, pricing, and submission preparation.
• Coordinate negotiations and procurements of materials and equipment throughout project duration.
• Supervise the preparation of bills of quantities (BQ), variation orders, cost estimates, and oversee cost control and budgeting.
• Support the project team in drafting letters, reports, and handling correspondences.
• Fulfill other quantity surveying responsibilities as delegated by senior management.
• Assess staff competency and recommend training for quantity surveying staff as needed.
• Evaluate and analyze the company's key performance indicators, devising improvement initiatives and actions for enhancement.

Requirements:

• Minimum Diploma / Degree
• At least 5 years of relevant experience
• Prefer with architecture / interior design experience

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Samuel Goh

EA License Number: 22C1430

Registration Number: R23112614

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)