• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

We are looking for an Aerospace Component Repair & Design Development Engineer on a 12-month contract to start with. There is a potential to extend further based on individuals' performance and business needs.

• Work location: Changi Airport

Roles and Responsibilities:

• Lead and develop repair processes for Component Repairs for Rolls-Royce Trent Engine Components.
• Lead and assist in development of required tooling for respective repairs and inspection requirement, creation of manufacturing routers and process instructions (data cards, recording forms, Setup plans, etc.)
• Lead in demonstration of First article for assigned repair schemes per AS9102, AS13000 and Rolls-Royce’s SABRe Guideline for suppliers.
• Work closely with the Manufacturing Engineers and Specialist from customer team to achieve assigned monthly targets of repair development of Repairs.
• Assist Manufacturing Engineers in resolution of technical and operational challenges or concerns raised to Rolls-Royce, and ensure follow through till approval is obtained, and repair is handed over to shop operations.
• Assisting all steps involved in Source Approval validation packages for Rolls-Royce Source control Repair schemes, and other documentation required for industrialization and approval.
• Assisting effectively interfaces with Engineering, Operations, Quality, Suppliers and other support teams during repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the repair development are executed on time and in budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.

Technical Expertise

• Well versed in Rolls-Royce Repair Schemes designs, application of engine manuals and Cleaning and inspection chapter, Special Process Manuals and Overhaul process.
• Demonstrated knowledge and experience in Rolls-Royce Component Repair processes.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, glass bead & shot peening, arc welding, Wide Gap brazing, machining, etc.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Commodity knowledge in Nozzle Guide Vanes and Stator Vanes repair is preferred.

Argyll Scott Consulting Pte Ltd

Role Summary

You will be an integral part of the Marketing Team and assisting in Design scope for our marketing projects. The successful intern will be attached to a mentor to maintain processes and assist with marketing day to day operations. You will be given the opportunity to get a head start in Marketing and gain exposure to working in one of Singapore’s largest Air-conditioning & Consumer Electronics Retailer and Service provider. Here at Gain City, we value Service Connection as the top core value in everything we do, and we welcome you to be a part of our big team of 800+ staff and counting!

Responsibilities:

• Work closely with creative team to adapt creative artworks, designs, signage and other display materials
• Design marketing print collaterals (e.g. posters, brochures, advertisements and label design)
• Develop digital assets such as animation, GIFs, flash, eDMs, digital banners and websites etc
• Prepare simple marketing materials
• Content Creation for social media brand pages
• Align designs specifications according to brand requirements and guidelines
• Prepare appropriate working files for digital/print/production
• Other Ad-hoc duties as assigned

Requirements:

• Understudy in Graphic Design
• Proficient in Adobe Creative Suite, Microsoft Suite, After Effects, Premiere Pro
• Students with photography, video editing & motion graphics skills will be a bonus
• Have an eye for details and aesthetics
• Ability to work in a fast paced environment
• Applicants must be Singaporean/PR and a full-time student pursuing an undergraduate degree or diploma from any of the following eligible institutions (NYP, NP, RP, SP, TP, NTU, NUS, SUSS, SIT, SMU,

• Position : Project Manager (Construction / Interior Design/ Furniture Industry)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5.5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Basic up to $5200 + $300 Transport Allowance if owns a vehicle + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Planning/Controlling/Monitoring/Managing & Directing the assigned project resources to best meet project objective.
• Ensures all changes to specifications, work scopes, and drawings are properly documented.
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is required in the smooth implementation of a successful project development.
• Assist in resolving any issues or challenges that may arise during the project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance with safety regulations and industry standards.
• Collaborate with internal teams to ensure successful project delivery.
• Manage material at the construction site to ensure zero wastage and no overstock of material.
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget.
• Coordinate and communicate with project teams, subcontractors, and suppliers.
• Ad hoc duties as assigned.

Requirements:

• Min 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC / Diploma holders or candidates with relevant experience and proven track records will also be considered.
• Experience in Construction / Interior Design/ Furniture Industry will be an added advantage.
• Able to start work within short notice preferred.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job description:

• Managing pneumatic system portfolios & dealing with technical specification and definition of industrial systems, products and solutions including system and product design
• Providing engineering solutions & handling technical & products issues
• Leading design team to come up with better system design and ensuring design meet market needs
• Providing sales & project & design support
• Ensuring company profitability and aligning with global product strategy

Basic salary up to $8000

5 days work week

Multinational corporation

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

· Responsible for preparing and modifying schematic, detailed, and production drawings for precast concrete components, steel moulds, and reinforced concrete (RC) structures.

• Responsible for creating 2D and 3D presentations and design drawings, while developing solutions to technical and design challenges in compliance with Singapore's established standards.
• Responsible for compiling data and performing basic design computations.
• Participate in client liaison, authority consultations, coordination with consultants and subcontractors, and attend design and construction meetings.

Requirements:

• Diploma or Degree in Civil Engineering
• At least 5 years of related working experience
• Experience in checking Precast Concrete Shop Drawings and working with Precast Concrete Supplier Design Team

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Are you a visionary creative with a passion for nurturing talent?

We are a boutique-sized event agency seeking a Creative Lead to spearhead innovative projects and inspire our team of young designers.

In this role, you'll lead the creative direction for our projects and pitches, ensuring outstanding quality while fostering an environment of collaboration and growth.

We're looking for a natural leader who genuinely cares about developing others, maintaining high creative standards, and driving exciting new ideas.

Key Responsibilities:
- Oversee all creative works for a diverse range of events
- Lead and mentor a team of young designers, guiding their professional development

- Collaborate closely with clients and stakeholders to bring their visions to life

Requirements:
- Proven experience in a creative leadership role in event production - Strong portfolio showcasing innovative and diverse projects
- Excellent communication skills and a nurturing leadership style

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 5 years or more experience in a relevant field.

DUTIES AND RESPONSIBILITIES

• Good knowledge of interior architectural details, working drawings and construction practices
• Proficient in AutoCad, SketchUp, Photoshop, MS Office suite, Revit
• Flair in design; able to sketch fast and produce a good design concept
• Good understanding of materials cost and application
• Work closely with the project manager, design coordinators, and project teams on conceptual designs, presentations, design development, and production
• Responsible for project deliverables, meeting overall project design schedules
• Result-oriented and passionate to deliver projects successfully
• Able to work independently with a high degree of integrity
• Value support and cultivate cooperation among colleagues
• Work closely with the team and Design Lead to develop, coordinate and implement the interior design of projects from concept design to documentation and construction
• Liaison with client, sub-contractor

JOB COMPETENCY (QUALIFICATION, EXPERIENCE & KNOWLEDGE)

• A recognized Degree/ Diploma in Interior Design or Interior Architecture
• 2-5 years of local working experience
• Fresh graduates with a desire to grow professionally are welcome
• Preferable experience in the workplace
• Fluent in spoken and written English
• Strong presentation, communication & interpersonal skills
• Able to work well in a fast-paced environment
• Team player with a positive attitude
• Conversant with local codes and regulations
• Interested applicants may also apply to [email protected] for consideration

Responsibilities:

• Identify, evaluate, and negotiate optimal purchase packages with suppliers or subcontractors, focusing on quality, pricing, terms, delivery schedules, and services.
• Coordinate purchasing activities across departments and suppliers to support assigned project requirements.
• Prepare and process purchase orders and associated documentation following company policies, procedures, and specifications.
• Manage requests to ensure operational needs are met, including goods and services supply, tracking orders for timely delivery, and verifying product quality.
• Maintain up-to-date purchasing records, data, and pricing in the system.
• Monitor and coordinate the delivery of purchased items to ensure timely arrival at stores or project sites.
• Organize and manage all purchasing documentation and files.
• Liaise with the accounts department to verify invoices, pricing, and delivery confirmations.
• Provide relevant departments with quotations for tender purposes.
• Assist with accounting tasks, including matching purchase orders with delivery orders and invoices, preparing payments, and maintaining documentation and filing.

Requirements:

• Experience in purchasing
• At least 1 year of experience
• Experience in office fit-out project at advantage

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Associate. The selected candidate will innovate Optical and Metasurface Design.

Key Responsibilities:

• Responsible for optical system design and development for metasurface based SLM 3D Holograph Display, Near-Eye Display, Virtual Reality and Augmented Reality etc. applications.
• Good experience on optical lens and system (e.g. Metalens) design
• Research meeting arrangement with project PIs and researchers
• Perform and analyze material/optics characterization
• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• A Master degree in the areas of Optical Engineering and/or Photonics devices and System.
• Knowledge and/or experience in using optical simulation tools such as Zemax, CodeV etc.
• Good interpersonal skills with the ability to work independently and also in a team environment.
• Entry level candidates are welcome to apply.

We regret that only shortlisted candidates will be notified.

This role is responsible for providing support to the reporting manager in the development of workforce solutions and workforce solution products for our clients. Specifically, this will include working with country stakeholders to design and price complex workforce solutions. This includes working on sales opportunities but also best practice initiatives to improve and enhance capability within the region.
In addition to working on specific sales opportunities, the role develops comapny product offerings, and solution-related sales collateral. This involves customer research, competitor research, partner research, product builds (in collaboration with relevant stakeholders), case study or reference searches, white paper searches, and tailoring of sales collateral.

Experience/Qualifications:
Essential:

• Sound technical skills and relevant experience
• Prior experience in a pre-sales, business analyst role and/or good analytical skills
• Experience working in a products/service solution focussed business
• Ability to work under tight timelines in a demanding environment
• Good communications and interpersonal skills
• Ability to analyse and reengineer business processes
• Possess a commercially-focused outlook including understand complex commercial models and P&Ls
• Good verbal and written communication skills
• Capability with Microsoft Office Product including advanced Excel Skills.

Desired:

• Prior experience designing and undertaking consulting engagements for clients
• Demonstrated understanding of various HR solutions technologies
• Awareness of market trends and current issues in HR management
• Prior project management and problem solving skills

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

HEAD OF DESIGN (EVENT)

Company background: One of Singapore's established event management company specializing in conceptualisation, production and management of small to large-scale events, conferences and exhibitions.

Location: Central (Bukit Merah)

Working Hours: 5 Days Work Week, Mon to Fri (10am to 6.30pm)

Remuneration Package:

• Basic up to S$ 8000
• AWS
• Project Incentive
• Profit Sharing

Job Responsibilities:

• Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions
• Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Lead and inspire a team of designers and oversee the design workflow for events and branded exhibitions (3D renderings, layouts, technical drawings and shop drawings)
• Projects allocation for the design team to ensure efficient turnaround
• Work closely with account servicing team and production team in ensuring design aligns with client’s requirements, and ensuring budget alignment for designs
• Communicate closely with vendors and contractors
• Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• Managing workflow with external freelancers when specialized skills or additional resources are needed

Requirements:

• Bachelor’s or Master’s Degree in Interior Design, Exhibition Design, or a related field
• Minimum 7 years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills
• Proficiency in 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Reference: 2024B005

Industry: Advance Manufacturing Technology

Location: Central area

Schedule: 5-day work week

Skills: Hardware / Software Designing

This Company is in the business of manufacturing of large-scale and sophisticated production in the transportation sector.

This position will be thrusted into developing hardware / software circuitry related to Advance RISC Machine.

Position Responsibilities:

• Will handle the designing of the physical aspect of Advance Risc Machines-based (ARM) single board computer with unique and specialize input/output interfaces.
• Will be closely involved in quality testing, inspection, debugging, coding and enhancing the development.
• Will be responsible in cataloging the procedures and documenting the step-by-step process.

Position Requirements:

• Degree holder in Computer Engineering, Mechanical Engineering or the related field.
• Must have experience or strong working knowledge in VHDL / Verilog Hardware Description Language coding.
• Detailed, organized, technical and operational immersed.

We will look to all candidates but will prioritize those closest to the requirements.

Thank you!

Joseph Syho

Reg Number: R1108657

EA Licence No: 18C9079

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Due to rapid growth, we are seeking an experienced Design Manager cum Team Leader to strengthen our technical team. This is a full-time position, and it is perfect for someone with rich façade design knowledge and passionate about managing roles.

Job Responsibilities

· In charge of Design Team to carry out façade design works.

· Organize and plan a design works to meet construction schedule.

· Provide leadership and manage the team members in a professional manner, e.g., allocation of work, providing guidelines to them in drafting to maintain the quality, improving productivity, checking drawings and cutting list profiles etc.

· Ensure design, drawings, and all other deliverables meet the standard requirements, specifications and within scope of works.

· Identify additional work/variations to the Project Manager / Contract Manager for processing/approval of the variation order.

· To coordination between Design Team, Consultants, Main Contractor and other contractors.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, review and comment of shop drawings in terms of constructability, sequencing and ensure quality of the design is maintained throughout.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To resolve any unforeseen interface problems throughout the various design phases.

Job Requirements

· Required skills: design development, design management.

· Knowledge and skills in Revit and Rhino are advantage, at least is able to read and extract information from 3D models prepared in Revit or Rhino format.

· Possess good communications and people skills

· Good organization, coordination and leadership skills

· Minimum 5 years working experience in façade design

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will have the opportunity to develop unconventional ultrasound transducer drivers, receiver circuits for IoT and biomedical applications as well as cutting-edge high-speed analog circuits for advanced optical communication.

Role & Responsibilities

• Design and tapeout circuit blocks e.g. high linearity low-noise amplifier, variable gain amplifier, envelop detector, and high voltage driver for MEMS ultrasound transducers.
• Work together with team on system integration and demonstration.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Minimum 2 years of transistor-level analog circuit design experience
• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Design experience with high voltage BCD process would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven