(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job Title: Site Support Coordinator

Location: Singapore
Job Type: Full-Time
Reporting to: Interior Design Manager

Job Overview

We are seeking a reliable and detail-oriented Site Support Coordinator to assist with site monitoring, customer interactions, and contractor communication.

The primary focus of this role is to follow instructions precisely from the Interior Design Manager and ensure tasks are executed as directed. This position involves taking photos and measurements on-site, documenting progress, and coordinating with Mandarin-speaking contractors. The work is a combination of on-site and remote tasks.

Key Responsibilities

• Follow Instructions:Take detailed and clear instructions from the Interior Design Manager and execute tasks as directed.
  
• Site Documentation:Capture clear and organized photos and videos of the site to document progress and current conditions.
  Ensure all visuals are labeled and shared promptly with the project team.
  
• Measurements:Accurately measure the site as instructed and report findings to the manager.
  
• Customer Feedback & Defects:Collect feedback from owners and share it with the project team.
  Walk through the site with owners to identify defects and document them for follow-up.
  
• Contractor Coordination:Communicate instructions to Mandarin-speaking contractors as required.
  Relay updates from contractors to the Interior Design Manager for timely action.
  
• Reporting:Submit daily updates, including photos, measurements, and any feedback collected.
  Maintain simple logs of completed tasks and observations.
  

Why Join Us?

• Gain experience in site operations and project coordination with clear, straightforward responsibilities.
• Work in a flexible role that combines on-site and remote tasks.
• Be part of a supportive team focused on delivering high-quality interior design projects.

Qualifications

• Language Skills: Fluent in English and Mandarin to communicate effectively with mandarin speaking contractors and team members.
• Experience: No prior experience required; training will be provided.
• Skills:Strong ability to follow instructions accurately and execute tasks precisely.
  Basic photography and measurement skills.
  Comfortable navigating construction sites and interacting professionally with contractors and clients.
  
• Other Requirements:Physically capable of conducting on-site inspections.
  Reliable, punctual, and detail-oriented.
  

Application

If you excel at following instructions and are eager to support site operations with diligence and attention to detail, we encourage you to apply.

Submit your resume and a brief statement about your interest in this role.

Join us as a Site Support Coordinator and play a vital role in ensuring project success through precise execution of tasks and clear communication.

Embark on a Creative Journey! Inspire Future Artists with a 4-Day Work Week!

We are recruiting for an art studio renowned for its innovative and nurturing approach to learning. Their unique programs are designed to foster creativity and encourage every child’s artistic expression.

Join their dynamic team, enjoy a balanced work-life schedule, and help shape the future of art education!

First Konnection – The Authorized Education Recruitment Specialist for this Role

What You Can Expect:

• Streamlined Process: Let us handle the logistics while you focus on showcasing your expertise.
• Direct Communication: Receive timely updates and clear guidance throughout the application process.
• Personalized Advice: Leverage our insights to present your strengths and secure the role.

About the Role:

• Inspire Creativity: Conduct engaging and imaginative art lessons for children.
• Nurture Young Minds: Develop supportive relationships with students.
• Collaborate and Innovate: Work with a dedicated team to create and deliver innovative art programs.
• 4-Day Work Week: Enjoy a flexible schedule that balances your career with personal time.

About You:

• Effective Communicator: Strong communication and interpersonal skills to connect with students and colleagues.
• Energetic and Adaptable: Thrive in a dynamic environment and enjoy fostering student growth.
• Availability: Willing to work a 4-day week, Wednesdays and Thursdays including weekends.

Why Join Us?

• Career Growth: Opportunities to grow with a leading art education provider.
• Supportive Environment: Be part of a team that values creativity and professional development.
• Balanced Work-Life: Enjoy the benefits of a 4-day work week while making a significant impact on young artists’ lives.

Ready to inspire and be inspired? First Konnection is here to support your career aspirations. Send your resume/CV to us and embark on a fulfilling career in art education. We look forward to welcoming you to the team!

Benefits of working with First Konnection:

• Proven success in placing educators in esteemed institutions.
• Personalized and supportive recruitment process.

Seize this exciting opportunity! Apply now!

EA Registration No.: R23111820 (Ben Chang)
EA Licence No.: 22C1307 (First Konnection Pte. Ltd.)

A global energy-efficiency and infrastructure firm is looking for an experienced Senior HVAC Design Engineer to oversee the design, development, and implementation of cooling systems and industrial utilities projects (HVAC/District Cooling Systems). The ideal candidate will have a strong background in mechanical engineering, with a focus on cooling technologies such as HVAC, refrigeration, and industrial water systems.

Responsibilities:

• Lead the design and development of cooling systems and industrial utilities projects (including large scale HVAC, chilled water, district cooling system, airside systems etc.)
• Manage the full project lifecycle from concept to delivery, ensuring adherence to timelines, budgets, and quality standards.
• Conduct feasibility studies, risk assessments, and cost-benefit analyses for proposed projects.
• Provide technical inputs for CAPEX and OPEX assessments
• Review equipment specification and ensure technical compliance

Qualifications:

• Bachelor's degree in Mechanical Engineering or any relevant disciplines
• Min. 5+ years of design expertise for cooling systems, industrial utilities, or large scale HVAC projects
• Strong technical knowledge of HVAC systems, refrigeration, industrial water systems, and related technologies.
• Proficiency in CAD/BIM software such as AutoCAD/Revit

If you are interested, kindly apply with your latest CV detailing your design expertise on HVAC/cooling systems. Only shortlisted candidates will be contacted.

• $3200 - $4000 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Marvell first revolutionized the digital storage industry by moving information at speeds never thought possible! Today, that same breakthrough innovation remains at the heart of the company's storage, network infrastructure, and wireless connectivity solutions. With leading intellectual property and deep system-level knowledge, Marvell's semiconductor solutions continue to transform the Enterprise, Data Center, SMB, Cloud, Automotive, Industrial, and Consumer markets. You will be solving new technical challenges alongside leading industry professionals in an open, creative environment with plenty of opportunities for personal / professional growth. Join our ambitious team within a multi-nation, multi-cultural company. Marvell develops leading-edge products within a unique high-tech environment that motivates & encourages continued learning and growth!

What You Can Expect

• Designing highly sophisticated CMOS transceiver/SERDES products.
• Implementation and verification of circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, CDRs etc. to meet key performance targets
• Performing design verification using industry standard tools such as Spectre, MATLAB etc.

What We're Looking For

• Master’s degree and/or PhD in Electrical Engineering and 5+ years of experience.
• The ideal candidate should have a deep understanding of analog mixed-signal design with experience in high-speed transceivers.
• Solid understanding and experience of designing analog mixed-signal circuit blocks including PLL, phase interpolator, low jitter clock distribution, Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, high-speed DACs and ADCs, Filters
• In-depth knowledge of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques
• Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE
• Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.)
• Familiarity with CDR architectures and implementations
• Design experience in advanced CMOS technologies, design with FinFet technology
• Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization
• Experience in lab testing of high-speed transceivers

RESPONSIBILITIES INCLUDE, BUT ARE NOT LIMITED TO:

• Develop HW microarchitecture, RTL design and verification for Expedera AI accelerators (Silicon IP)
• Explore HW design space power/performance/area optimization
• Collaborate with HW/SW architects in HW/SW co-design
• Execute with DevOps for quality assurance

REQUIRED QUALIFICATIONS AND EXPERIENCE:

• Bachelor's degree or equivalent in a relevant field such as electrical engineering, computer science
• Graduating Masters are welcome
• Familiarity with Verilog, Python, Linux

PREFERRED QUALIFICATIONS AND EXPERIENCE:

• SystemVerilog, Univeral Verification Methodology
• C++
• Git, Jenkins, Continuous Integration/Continuous Delivery, JIRA
• Machine Learning/Deep Learning
• GPUs, AI accelerators/NPUs, FPGAs

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Marvell first revolutionized the digital storage industry by moving information at speeds never thought possible! Today, that same breakthrough innovation remains at the heart of the company's storage, network infrastructure, and wireless connectivity solutions. With leading intellectual property and deep system-level knowledge, Marvell's semiconductor solutions continue to transform the Enterprise, Data Center, SMB, Cloud, Automotive, Industrial, and Consumer markets. You will be solving new technical challenges alongside leading industry professionals in an open, creative environment with plenty of opportunities for personal / professional growth. Join our ambitious team within a multi-nation, multi-cultural company. Marvell develops leading-edge products within a unique high-tech environment that motivates & encourages continued learning and growth!

What You Can Expect

• Designing highly sophisticated CMOS transceiver/SERDES products.
• Implementation and verification of circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, CDRs etc. to meet key performance targets
• Performing design verification using industry standard tools such as Spectre, MATLAB etc.

What We're Looking For

• Master’s degree and/or PhD in Electrical Engineering and 3+ years of experience.
• The ideal candidate should have a deep understanding of analog mixed-signal design with experience in high-speed transceivers.
• Solid understanding and experience of designing analog mixed-signal circuit blocks including PLL, phase interpolator, low jitter clock distribution, Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, high-speed DACs and ADCs, Filters
• In-depth knowledge of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques
• Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE
• Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.)
• Familiarity with CDR architectures and implementations
• Design experience in advanced CMOS technologies, design with FinFet technology
• Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization
• Experience in lab testing of high-speed transceivers

Job Description:

We are seeking a highly skilled Senior Hardware Design and Embedded Systems Engineer with over 10+ years of experience in hardware electronics and embedded systems. The ideal candidate will possess expertise in designing, prototyping, and delivering high-quality hardware solutions for automotive and mobility electronics. This role requires a strong focus on innovation, quality assurance, and project management.

Responsibilities:

Lead hardware design projects from concept to production, ensuring adherence to ISO26262, IEC61508, and SIL standards.

Oversee product estimation, planning, and change management to meet delivery timelines and maintain quality benchmarks.

Collaborate with customers, suppliers, and stakeholders to gather requirements and provide technical solutions.

Manage cross-functional teams, assign tasks, and monitor progress to ensure timely product delivery.

Perform risk assessments, troubleshoot issues, and implement solutions to address challenges.

Execute hardware testing, including unit and integration tests, and validate software-hardware integration.

Prepare technical documentation such as schematics, BOMs, and engineering specifications.

Conduct field failure analysis and provide exceptional customer service.

Key Projects:

Design and validation of automotive electronic systems like electric steering control units and instrument clusters.

Development of mobility solutions such as platform screen doors with advanced safety features.

Embedded product design for two-wheelers, four-wheelers, and industrial automation systems.

Qualifications:

Bachelor's degree in Electronics & Communication Engineering or equivalent.

Extensive experience with embedded systems, microcontrollers, and protocols such as CAN, UART, RS232, SPI, and I2C.

Proficiency in hardware design tools like Altium Designer and OrCAD, along with testing tools such as oscilloscopes and logic analyzers.

Strong understanding of DFMEA, IATF16949, EMI/EMC testing, and reliability assurance.

Skills:

Leadership and team management capabilities.

Exceptional problem-solving and decision-making skills.

Adaptable, self-organized, and passionate about hardware and automotive domains.

Preferred Qualifications:

Knowledge of PMDC and BLDC motor driver design.

Experience with automotive safety standards and compliance testing.

ielo design is a creative agency that provides tailored and fuss-free solutions to retailers and F&B players. As a one-stop agency, we offer a wide range of services that include: market insight, customer analysis, design development and production. We truly believe that each project we design is unique and driven by one objective: creating a stronger and deeper connection with customers that goes beyond aesthetics.

Simply, ielo design boosts its clients’ business results by optimising customer experience through all physical and digital touch-points.

ielo design in Singapore is looking for a project manager to manage retail and communication projects. The successful candidate must be an approachable team player and be open-minded, very organized and meticulous interested in the design world

He/she will work along with big retailers/FMCG and F&B brands. Candidates should be able to efficiently and creatively contribute to an ambitious growth agenda.

Creating and maintaining project schedules to proactively identify risks and track milestones

Ensure maintenance of agreements and organize documentation at all times

Managing and delivering day-to-day operational requirements of Clients on all projects

Consolidate information

Assisting the creative team by synthesizing useful insights from different sources in consolidated presentations

Does regular competitive evaluation

Foster great working relationships internally and externally

Job Description & Requirements

We are hiring a regional UI design lead for the team expansion in Singapore.

• Global team and new headcount.
• Competitive compensation;

Responsibilities:

• Lead and optimize the company's regional UI design work for the trading platform;

Requirements

• Web3/crypto experience is highly preferred.
• Mandarin is preferred to liaise with Chinese-speaking stakeholders;

Interested applicants please apply directly here or send your resume to [email protected] and attn it to Vicky Zhang (R23116827)

Short listed candidates will be notified;

www.bmjconsulting.co

EA Registration Number: R23116827

Data provided is for recruitment purposes only

Business Registration Number: 202302928R. Licence Number: 23S1715

Position: Program Assistant Manager (Mechanical Product Design/ Plastic Injection Tool Fabrication)

Location: Loyang East (Bus stop nearby)

Working hours: 5 days work week, Monday to Friday (8AM to 5:30PM)

Salary (commensurate with experience): Up to $6,000 + AWS + Bonus + 14 Days Annual Leave (Increase 1 day per year capped at 21 days)

Duration: Permanent

Industry: Electrical Manufacturing, Transport and Logistics

Main Responsibilities:

• To strategies, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• At least 2 years relevant experience.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on LinkedIn: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

• Designing tailored solutions for new deals and renewals based on client needs
• Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings
• Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure
• Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery
• Identify and implement process improvements to drive efficiency and success
• Attend and actively participate in client briefings pitches, locally, regionally and globally
• Utilise project management tools and techniques and drive innovation through technology enabled solutions
• Enable continuous improvement for existing clients and projects

Who you are:

• With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.
• An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems
• Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors
• You are energetic, committed and results oriented
• You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

• Work with some of the world’s leading and most recognised brands
• Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)
• Flexibility is at the core of who we are, and flexible work arrangements are encouraged
• Quarterly and annual recognition programs to celebrate our employee’s success
• We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity.

Solution Design and Implementation Lead

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

- Designing tailored solutions for new deals and renewals based on client needs

- Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings

- Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure

- Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery

- Identify and implement process improvements to drive efficiency and success

- Attend and actively participate in client briefings pitches, locally, regionally and globally

- Utilise project management tools and techniques and drive innovation through technology enabled solutions

- Enable continuous improvement for existing clients and projects

Who you are:

- With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.

- An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems

- Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors

- You are energetic, committed and results oriented

- You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

· Work with some of the world’s leading and most recognised brands

· Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)

· Flexibility is at the core of who we are, and flexible work arrangements are encouraged

· Quarterly and annual recognition programs to celebrate our employee’s success

· We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity

• Singapore Based (Paya Lebar)
• Working Days: Mon to Fri 9am – 6pm
• Basic Salary: $2500 to $3000
• Diploma or its equivalent or relevant ITE Certificates; 1-3 years of experience in Retails, Offices and Other Commercial Interior Fit-out coordination.
• Career Progression Opportunities

Requirements:

• Diploma or its equivalent or relevant ITE Certificates.
• At least 1-3 years of experience in Retails, Offices and Other Commercial Interior Fit-out coordination.
• Good knowledge in cost and quality control, resource planning and on-site operations
• Good knowledge of design, detailing, M&E services, Building Control Act and subsidiary legislations applicable statutory codes and regulations

Job Duties:

• Responsible for the taking of quantities, sourcing subcontractors and suppliers, pricing and preparation of tender submission
• Tendering and contract documents administration, preparing BQ, Cost Estimate, Cost Control and Budgeting
• Undertaking costs analysis for repair and maintenance project work
• Purchasing of materials and project related items
• Project administration and documentation

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568