We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Lead Design Engineer, you will be focussed on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

What we need you to do…

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products;
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Liaise and collaborate with the suppliers to develop innovative, robust and scalable technology platforms.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Own/contribute to team/department level initiatives & change projects.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

About you

• A degree in a relevant engineering, product design discipline or equivalent.
• 5+ years’ industry experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate your work, and others
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Senior Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

Responsibilities include:

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

​

About You

We are on the lookout for a dynamic and skilled Senior Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, science discipline or equivalent.
• At least 2-3 years’ experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Key Responsibilities:

• Create conceptual designs and presentations, including mood boards, sketches, and 3D models.
• Develop detailed design plans, floor layouts, and specifications.
• Engage with clients to understand their requirements, preferences, and goals.
• Present design concepts and ensure client approval at every stage.
• Coordinate with architects, contractors, and suppliers to ensure seamless project execution.
• Manage project timelines and budgets, ensuring all deliverables meet quality standards.
• 
  
• Source and recommend materials, furnishings, and fixtures that align with the design vision and budget.
• Stay updated on market trends and innovative materials.
• Ensure designs comply with safety, accessibility, and building code requirements.
• Prepare and submit necessary documentation for regulatory approvals.
• Work closely with other designers, drafters, and project coordinators to achieve project goals.
• Provide guidance and feedback to junior team members as required.

Qualifications:

• Proficiency in design software such as AutoCAD, SketchUp, 3D Max, Revit, or similar tools.
• Strong understanding of space planning, materials, and design principles.
• Excellent visualization skills with attention to detail.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

• Degree in the civil/structural discipline.
• At least five (5) years of relevant experience on projects similar in nature to civil projects
• Experience in the design of geotechnical works for deep excavation.
• Experience in LTA projects is an adventage.

Essential Job Functions:

The Design Manager is responsible, but not limited to, the following:

General

• Close communication with PD/PM to reflect PD/PM’s intention for the project and establish Design management policy/tactics in line with PD/PM’s intention.
• Responsible for dealing with client and consultant management.

Planning & Programming

• Planning of shop drawings submission schedule to control the sequence and time frame for development of shop drawings.
• Prepare documents/samples submission schedule to control the sequence and timing for samples submission/approval with preferable float time allowed for procurements.

Quality

• Co-ordinate all related design matters with Consultants/ Client.
• Ensure main contract and sub-contract designs co-ordinated fulfil all design requirements.
• Co-ordinate with Contract team for any formal and informal changes made by Consultants.
• Co-ordinate with Contract team for proper sequence of sub-contract awards.
• Resolve technical problems for team.

Safety

• Responsible for the compliance to safety & occupational health practices to be implemented at Design Section and Design subcontractors with IMS safe work methods.
• Responsible for site implementation of safety standards to comply with IMS safe work methods.

Minimum Qualifications:

• Degree or Diploma holder in related discipline.
• At least 10 years of design co-ordination experience with Architectural and Structural trades in the building construction industry.
• Able to work independently. Work experience for at least two large scale construction projects.

Knowledge/Skills/Abilities:

• Good knowledge of local authority requirements and engineering standards.
• Excellent verbal and written communication skills.
• Ability to organise and control activities of the design team.
• Good skill to manage changes by Consultants, i.e. comments to RFI or AI issued, ensure the changes are economically in favour to the Contractor.
• Familiar with 2D CAD operation and good understanding of 3D Modelling management.
• Ability to multi task.
• Ability to analyse and synthesize complex issues quickly.

Hello, visual virtuoso! Havas Play, our Social, PR, Content and Experiential Events division of Havas Singapore, are seeking an Art Director to amplify our dynamic team. You'll have the opportunity to weave impactful stories across various digital and social platforms. Let your portfolio speak for your creativity – include a link in your CV.

Please note: We appreciate every application. However, only those shortlisted will be contacted.

Your Role:

• Work closely with client servicing and creative teams. Your journey will include concept ideation, development, and execution of creative assets, ensuring they resonate with client briefs.
• Collaborate with the teams in ensuring that all creative output aligns with brand and design guidelines.
• Maintain creative and brand integrity across all campaigns and projects, which includes the timely delivery of high-quality creative materials for various client accounts.
• Work seamlessly with internal teams and external production partners to facilitate the smooth execution of creative projects.

Your Arsenal:

• Minimum 3 years of experience in the Advertising industry, preferably within a bustling agency environment.
• Proficiency in art tools and software such as Adobe Photoshop, Illustrator, Premiere, and After Effects.
• Solid understanding of motion graphics and video editing is a plus.
• Knowledge of generative AI tools would be the cherry on top.
• Updated with content trends across major social media platforms (Facebook, Instagram, TikTok, LinkedIn).

What Makes You Stand Out:

• Keen eye for design aesthetics and an unquenchable passion for creativity.
• Interest in the ever-changing world of design trends and social/digital content formats.
• Mastery in conveying ideas effectively.
• Proactive, responsible, and team-oriented attitude is your strength.
• Stellar organisational skills and a sharp eye for detail.

Embrace the Possibilities:

Not entirely certain if you tick all the boxes? Don't let that hold you back. At Socialyse, we're not just seeking qualifications – we're after talent. We're building an environment where diverse perspectives, backgrounds, and skills flourish. If you're genuinely passionate about what we do and eager to learn, we invite you to step forward and apply.

About Havas Singapore

Within our Singapore Village is a network of business units including Havas Media, Arena Media, Havas Play, Socialyse, Red Havas, Havas Market and BLKJ Havas, offering services across media, social, PR, e-commerce and creative. Since 2015, we’ve had an unbroken streak of Agency of the Year (AOTY) wins across disciplines, including Integrated Marketing AOTY, Media AOTY, Specialist AOTY, and PR AOTY.

We are also committed to building a diverse culture where our people can grow, thrive, and feel that they belong. In 2023 and 2024, we won Best Agency Culture at Marketing Interactive’s Agency of the Year Awards, and are a Great Place To Work® Certified™ agency.

Here at Havas, we pride ourselves on being committed to offering equal opportunities to all potential employees and have zero tolerance for discrimination. We are an equal opportunity employer and welcome applicants irrespective of age, sex, race, ethnicity, disability and other factors that have no bearing on an individual's ability to perform their job.

• Work closely with the sales team to identify and scope opportunities for the Cadence FED platform.
• Understand the Goal and Objective, then plan and execute and manage key technical evaluations by co-working proactively with existing and potential customers as well as team colleagues
• Train, ramp-up and accompany customer project.
• Conduct basic and advanced training, presentations and demos as necessary.
• Ramp-up other members of the team on the advanced FED front-end technologies and tools.
• Providing technical expertise to address clients’ queries, which need expert involvement

This position requires:

• 5+ years’ experience in digital IC implementation including logic synthesis, physical synthesis, floorplan, placement, STA signoff.
• Hands-on experience on running advanced process hierarchical, timing driven, SI prevention, low power place-and-route projects a big plus
• Familiar with logic synthesis tool (DC or Genus), P&R basic knowledge of ICC or EDI, STA (Tempus), Equivalence Checking (conformal-EC or Formality), UPF/CPF concept
• Knowledge of Linux and tcl is a must
• Good program/engagement management skills
• Effective team player, willing to learn

Seeking a full-time Research Assistant to join a team of researchers working to advance visual analytics in computer vision. Successful applicants will contribute to a research project that develops new techniques in image and video analysis.

Candidates should possess a strong interest in learning and researching state-of-the-art computer vision techniques, as well as a strong ability in coding and mathematics.

This position is ideal for individuals interested in pursuing an academically grounded, applied research career.

The candidate will be expected to:

• Understand basic machine learning and AI methodologies
• Code and run computer vision algorithms
• Contribute towards research conceptualization and methodology
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders

Skills and qualifications required:

• Obtained a Bachelors degree related to the computer science or mathematics
• Excellent written and verbal communication skills
• Strong programming skills.
• Proficiency with Python

How to apply:

Interested applicants are encouraged to send in their application with the following documents:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae

Enquiries about the position can be addressed to Assistant Professor De Wen Soh ([email protected])

Appointment will be initially made on contract basis for one year, renewable subject to good performance and mutual agreement.

We regret that only shortlisted candidates will be notified.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

JOB TITLE: SUBJECT TEACHER (DESIGN & COMPUTER SCIENCE)

Links to: Learning Area Leader, SLT Link Person

WHO ARE WE?

Nexus is an empowering, learning-focused community. We strive to create an honest, open and innovative community with our learners, parents and peers. We believe that we have something unique and special here, and we are proud to be different in the way we work and how we teach and learn.

At Nexus, we do things differently. Each member of staff is valued and recognised as a unique individual collaborating as part of a supportive community to elevate one another with innovative ideas. Our strategies emerge from the collective positive mindsets of our colleagues. You will experience high levels of ownership and empowerment in your role.

JOB DESCRIPTION

Subject teachers are informed, reflective practitioners who use inquiry-based teaching strategies to create positive learning environments that motivate and challenge learners to become proactive, life-long learners and leaders.

As a member of our Design and Computer Science team, you will be teaching groups of learners between years 7 to 13 (ages 11 to 18). We deliver the IB MYP, IGCSE (Edexcel), and IBDP across the Secondary school.

ROLE AND RESPONSIBILITIES

Employing effective pedagogy that enables children to become successful and self-regulated learners who achieve personal excellence by:

• Building learning-focused relationships;
• Empowering children to become independent learners;
• Using appropriate assessment tools for formative and summative assessment;
• Using assessment information to plan progression;
• Providing high-quality scaffolding and feedback to learners;
• Encouraging learners to reflect on their learning;
• Engaging learners in setting learning goals;
• Involving parents in their children’s learning through learner-led conferences and regular parent-teacher dialogue;
• Employing and integrating IT to enhance learning;
• Supporting learners to solve authentic problems related to real-world situations;
• Collaborating positively within a team and across teams;
• Meeting the Nexus Teacher Professional Standards, aspiring to grow and develop and being committed to professional learning;
• Involvement in whole-school events and activities as required;
• Working with learners as a form tutor as assigned, helping them set and achieve personal goals.

QUALIFICATIONS AND SKILLS

• A recognised teaching qualification
• Bachelor’s degree (or higher qualification) in Design Technology, Computer Science, Education, or a related field
• Familiarity with tools such as Python, Scratch, CAD software, Micro:Bits, Audino and robotics platforms
• Ability to teach a range of technical skills, including programming, graphic design, and prototyping
• Experience working with bilingual and multilingual learners and learners with diverse needs
• At least 2 years of relevant experience in an international school environment where the school curriculum focused on IBMYP, IGCSE or IBDP (preferred)

Nexus International School (Singapore) is committed to the safety and wellbeing of our children and families. Nexus endorses the Convention on the Rights of the Child, which Singapore ratified on 11 December 2008, and establishes a clear policy and guidelines to protect our learners from maltreatment by any person or persons who come in contact with them in any environment.

Nexus International School (Singapore) is an equal opportunity employer. We respect and seek to empower each individual and value the diverse cultures, perspectives, skills and experiences within our school.

Whilst every effort has been made to explain the main duties and responsibilities, the role may be revised from time to time.

Interested candidates may apply via https://careers.taylors.edu.my/job-invite/3966/

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Work closely with the sales team to identify and scope opportunities for the Cadence FED platform.
• Understand the Goal and Objective, then plan and execute and manage key technical evaluations by co-working proactively with existing and potential customers as well as team colleagues
• Train, ramp-up and accompany customer project.
• Conduct basic and advanced training, presentations and demos as necessary.
• Ramp-up other members of the team on the advanced FED front-end technologies and tools.
• Providing technical expertise to address clients’ queries, which need expert involvement

This position requires:

• 5+ years’ experience in digital IC implementation including logic synthesis, physical synthesis, floorplan, placement, STA signoff.
• Hands-on experience on running advanced process hierarchical, timing driven, SI prevention, low power place-and-route projects a big plus
• Familiar with logic synthesis tool (DC or Genus), P&R basic knowledge of ICC or EDI, STA (Tempus), Equivalence Checking (conformal-EC or Formality), UPF/CPF concept
• Knowledge of Linux and tcl is a must
• Good program/engagement management skills
• Effective team player, willing to learn

Key Responsibilites and Accountabilities

• Staff Management
• Maintains operations by initiating, coordinating, and enforcing program, operational, and personnel policies and procedures with the guidelines provided by the Human Resources Department
• Accountable for the achievement of top line and bottom line targets
• Training and development of the team (Cash handling, Inventory Management, Carmera setting, EPX/IMIX, Salesmanship)
• Maintains site staff quality by training, on the job evaluations, image quality, assessments and guest service evaluations
• Ensures availability of merchandise and services by maintaining inventories
• Knowledge in basic trouble shooting of the equipment in the site
• Generate reports to be used by various departments
• Make recommendations on pricing by reviewing sales activities; determining additional needed sales promotion; studying trends
• Maintains the stability and reputation of the site by complying with legal and partner requirements
• Knows and understands how to read a P&L and make the necessary operational adjustment to positively affect it.
• Ensure accurate reports are accumulated and sent to DM and head office
• Contributes to team effort by accomplishing related results needed
• Build a good relationship with internal management and partners
• Responsible for keeping accurate records to assist with payroll and OT on a daily basis for the team on site
• Implement guidelines provided by HR Department in the management of hi/her team
• Adheres to Company image and grooming standards at all time whilst on duty
• Perform any other reasonable tasks as may be requested from time to time

Skills and Qualification

• Candidate must possess at least Primary/Secondary School/"O" Level, Diploma/Advanced/Higher/Graduate Diploma in any field.
• Required language(s): English
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): customer service, leadership, microsoft excel, communication, extrovert
• Preferably Manager specialized in Sales - Retail/General or equivalent.
• Excellent verbal and written communication skills
• An extrovert who does not mind striking up conversation with complete strangers
• The ability to impart knowledge and create and training others within the organisation
• Flexible and adaptable
• A self-motivated fast learner

This is a multi-position posting for interior designers as we are seeking 2 positions with different experience levels.

General Duties

• Design driven with experience in show flat, residential and/or hospitality projects
• Have good excellent communication skills
• Ability to resolve technical issues in line with the project's design intent
• Creative thinking to develop new ideas, space planning, design development, and produce construction drawing for fabrication.
• Manage budget and deadlines on agile projects

Qualifications

• Diploma or Degree in Interior Architecture/Interior Design
• Minimum 2 years of professional experience (Remuneration shall be discussed based on experience)
• Proficiency in Autocad, SketchUp, Enscape, Photoshop and MS Powerpoint.
• Entry level are welcome to apply for the junior position.

Please email your resume and portfolio to [email protected].

Job Description:

· Produce mood, material & design presentations for internal & consultant meetings.

· Work independently from conceptual design, design development & space planning.

· Produce schematic design (Draft sketches, technical drawings on AutoCad, 3D views on SketchUp),

· Work with project managers during installation works to ensure that output matches with design.

Requirements:

· Degree of related fields preferred (Diploma holders with experience may apply).

· Requires communication with peers & fellow craftsmen.

· Candidates expected to be highly driven, responsible and self-motivated.

· Minimal 3 to 5 years' of work experience, preferably with experience in sales client facing function.

(Renumeration with CPF, will vary based on experience and portfolio)

• Ability to cut and lay tiles following tiles setting out plan. drawings able ties seting pid and read layout plans, and stiles in dify withorserlevel, consistent grouting
• Screeding of tiles base with trowels using waterproofing
• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms · Tap tiles into place carefully using tools to properly adhere tiles to the base
• Follow blueprints precisely and mark and measure surfaces that need to be tiled.

• Engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to civil projects, including at least five (5)years in the design of geotechnical works for deep excavation.
• Experience in LTA projects is an adventage.

Industry: Interior Design

Working hours: 10am to 7pm (Mon to Fri) - Flexibility in choosing working hours

Salary: $2000 to $3000 (No Experience), $3000 to $5000 (Experienced) + Commission

Additional Benefits

• Medical and Dental reimbursement
• Leads will be provided
• Design part will be handled by designing team
• Training provided

JOB DESCRIPTION

• Handle sales enquiries. (Focus more on sales, the design team will assist you in the design part)
• Discuss and propose professional advice on interior design, space planning, design conceptualization, and material selection to prospective clients
• Ensure customer satisfaction and resolve any issues that arise during the project
• Prepare proposal and quotation based on client requirements and design
• Manage and coordinate project progress from inception to completion
• Site supervision and project coordination
• Work closely with subcontractors and suppliers to ensure the project works smoothly
• Schedule workflow to meet customer move-in date
• Create detailed 2D or 3D designs for complex projects

JOB REQUIREMENTS

• Applicants with Min. Diploma/Degree in Interior Design or related fields are highly welcome
• Candidates with or without working experience are welcome to apply, training provided
• Preferably at least 1-3 years of working experience in sales interior design are welcome to apply
• Customer-oriented with excellent communication skills
• Independent with sales and target-driven mindset

EA Reg. Number: R21100629

EA License Number: 22C1278

We are inviting interested applicants who are good team players, enthusiastic, service-orientated, and professionally competent to join our dedicated team.

RESPONSIBILITIES:

1. Plan and deliver engaging, hands-on art lessons for elementary students in alignment with the school’s curriculum and learning objectives.

2. Introduce students to various art forms, techniques, and media, such as drawing, painting, sculpture, and digital art.

3. Foster an appreciation for art history and cultural diversity through lessons that incorporate artists, styles, and traditions from around the world.

4. Assess and evaluate student progress, providing constructive feedback to encourage improvement and creativity.

5. Organize and display student artwork in classrooms, hallways, and school exhibitions to celebrate their achievements.

6. Maintain a safe, clean, and organized classroom environment conducive to creative expression.

7. Manage art supplies and resources, ensuring availability and proper use.

8. Collaborate with other teachers and staff to integrate art into interdisciplinary projects and school-wide initiatives.

9. Encourage a positive and inclusive classroom atmosphere that supports all students’ artistic exploration.

10. Stay current on art education trends and best practices to continuously enhance teaching methods.

11. Maintain proper discipline in the classroom and on the school, premises utilizing teacher created discipline plans in conjunction with a school-wide discipline plan.

12. Employ a variety of instructional aides, methods, and materials that will promote best practices in order to reach the whole child, as stated in the ICS mission statement.

13. Lead Extra-Curricular Activities (ECA) for students to earn a minimum of three points of ECA credit. This includes planning, organizing, and supervising activities that enhance students' skills, interests, and overall development outside of the regular curriculum

14. Ensure Biblical Worldview Integration throughout the curriculum.

15. Complete lesson/unit plans, Atlas, ESO documentation, and PLC expectations within specified time frames.

16. Plan and lead a student Chapel when called upon.

17. Carry out supervisory recess duty as assigned (before school, break, lunch, after school).

18. Maintain regular and accurate attendance and grade reports that provide comprehensive information for each student’s learning progress. Inform the administration if/when unable to fulfill any duty assigned. Prepare adequate information and materials for a substitute teacher.

19. Communicate with parents, students, and other professional staff regarding student progress (behavioral and academic).

20. Demonstrate the character qualities of enthusiasm, courtesy, flexibility, integrity, kindness, self-control, perseverance, and punctuality.

QUALIFICATIONS:

● Bachelor’s degree in Art Education, Fine Arts, or a related field.

● Teaching certification (as required by state or district regulations).

● Previous teaching experience, preferably with elementary-aged children.

● Strong knowledge of art techniques, materials, and art history.

● Excellent communication and classroom management skills.

● Creativity, enthusiasm, and a passion for working with children.

● Maintain teaching credentials as required through sponsoring agencies (state/provincial education department, ACSI, etc.). Acquire and maintain teaching credentials as required by the laws of Singapore, NICS, and/or ICS.

PREFERRED SKILLS:

● Experience with integrating technology into art lessons.

● Familiarity with diverse learning needs and adaptive teaching methods.

● Ability to organize school-wide art events or projects.

Job Description:

• Responsible for developing system specifications and electrical diagram layouts.
• Assist in setting up, programming, testing, and implementation of computer control systems used for production automation and industrial equipment design.
• Designing and drafting drawings using CAD software.
• Evaluate engineering design to ensure it meets customer specification.
• Prepare design documents based on project specifications.
• Suggest modifications to develop and design to enhance quality.

Job Requirement:

• Good interpersonal and communication skill
• With PLC knowledge and have experience in Electrical wiring & diagram
• Familiar with CAD software
• Able to work well in a team
• Company is located at West Singapore

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629