This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

ABOUT WORLD TABLE TENNIS

At World Table Tennis (WTT), we are revolutionizing the sport we love and pushing the boundaries of what's possible through world-class entertainment events and engaging fan-centric content. With an unwavering focus on innovation at our core, we are committed to leading the global table tennis industry and inspiring the next generation of fans and players worldwide.

WTT HEAD OF CREATIVE DESIGN

World Table Tennis (WTT) is a commercial entity created by the ITTF to grow the professionalisation of table tennis by running ITTF’s commercial and events business. Taking a new, innovative and entrepreneurial approach to how table tennis should manage its competition platform and positioning, WTT has been tasked with re-imagining a new professional event structure, re-energising the entertainment and fan experience, and re-defining the new era.

WTT is seeking a visionary and hands-on Head of Creative Design to lead and oversee all design output across the ITTF Group. This role will play a key part in shaping the visual identity of WTT, delivering world-class creative solutions that elevate the brand and inspire audiences worldwide.

RESPONSIBILITIES:

• Lead and oversee the Creative Design Team, managing all design requests across WTT departments to ensure high-quality, timely outputs that align with the organization’s vision.
• Be hands-on with creative execution, developing branding elements and creating visual assets for WTT events, merchandise, activities, and initiatives.
• Develop and maintain effective workflows, mapping timelines for the Design Team while fostering clear communication with the wider WTT Team to manage expectations and priorities efficiently.
• Establish processes and guidelines for design briefs, setting timelines and requirements to ensure all requests are accompanied by accurate information, enabling the team to deliver their best work.
• Act as the custodian of WTT’s brand design, ensuring consistency, integrity, and excellence across all visual and print outputs for all stakeholders.
• Conceptualize and design impactful promotional and marketing materials, delivering campaigns that enhance WTT’s visibility, fan engagement, and commercial goals.
• Develop corporate presentation decks and assets, ensuring a strong visual narrative that effectively communicates WTT’s objectives to internal and external audiences.
• Design and produce printed materials,including brochures, annual reports, event programs, and other collateral, reflecting WTT’s brand identity and design excellence.
• Maintain standardization of WTT branding across all platforms, ensuring consistent application of visual guidelines across campaigns, digital assets, and event branding.
• Lead the design of logos, posters, banners, and event branding, creating standout visuals that captivate fans and stakeholders worldwide.
• Collaborate with third-party vendors for printing and production, building strong relationships to ensure quality outputs and timely delivery.
• Provide creative leadership and strategic design solutions, driving initiatives that enhance WTT’s global positioning and visual storytelling.
• Support management with additional creative tasks, maintaining a solutions-focused approach aligned with organizational goals.

REQUIREMENTS:

Essential:

• Tertiary education in Graphic Design with 5-7 years of relevant experience.
• Proven project management and team leadership skills.
• A strong design portfolio showcasing previous works.
• Strong business acumen with active listening abilities.
• Exceptional creativity and innovative design skills.
• Highly proficient in design software, including but not limited to Illustrator, InDesign, and Photoshop.
• Solid understanding of basic design theory, such as colour theory, typography, and application across print and digital platforms.
• A keen eye for detail while ensuring all designs are visually appealing.
• Meticulous with excellent time management and organisational skills.
• Strong communication, presentation, and interpersonal skills.
• Ability to think critically and adapt to changing situations as needed.

Desirable:

• Passion for sport and business.
• Ability to work in multiple languages, preferably South East Asian languages.

HOW TO APPLY

Submit CV and cover letter to [email protected] with the email subject titled “WTT Head of Creative Design”.

Due to the high number of candidate applications expected, only those who are shortlisted will be contacted.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

About InterOpera

InterOpera (https://www.interopera.co/) develops digital infrastructure and solutions for environmental attributes. As part of the global transition to net-zero and sustainable energy, we streamline sustainability processes for businesses, aggregate green data, RECs, and carbon credits, and facilitate the entire lifecycle of green attributes—including registration, issuance, management, trading, retirement, and analysis. Our vision is to digitally bridge sustainability and financial markets for a connected and sustainable future.

About the Role

We are seeking a talented and dynamic Product Design and Product Specialist to join our team in Singapore. This hybrid role combines expertise in product management and design, with a strong focus on customer engagement. If you thrive in a collaborative environment, are passionate about user-centric design, and excel at aligning product strategy with business goals, we’d love to hear from you!

Key Responsibilities

Product Design

• Design user-centric solutions, including wireframes, prototypes, and user interfaces.
• Enhance user experiences through thoughtful design that aligns with the brand’s identity.

Product Strategy

• Collaborate with stakeholders to define and align product goals with business objectives.
• Contribute to product roadmaps and strategic initiatives to achieve market success.

Customer Engagement

• Interact directly with clients to understand their requirements and gather actionable feedback.
• Ensure product development aligns with customer needs and delivers maximum value.

Cross-Functional Collaboration

• Work closely with developers, marketers, and sales teams to ensure seamless product execution.
• Foster a collaborative environment to deliver cohesive and innovative solutions.

Iteration & Improvement

• Regularly analyze product performance metrics.
• Implement design and functional adjustments based on data insights and client feedback to ensure continuous improvement.

Requirements

• Experience: 3–5 years in product design, product management, or related roles.
• Technical Skills: Proficiency in design tools (e.g., Figma, Sketch, Adobe XD) and familiarity with Agile methodologies.
• Soft Skills: Exceptional communication skills with a strong ability to engage with clients and cross-functional teams.
• Problem-Solving: Strong analytical mindset with the ability to translate feedback into actionable product improvements.
• Customer Focus: Demonstrated ability to create solutions tailored to customer needs.
• UX/UI Knowledge: Understanding of UX/UI best practices and user research methodologies.

Compensation

• Base Salary: SGD 5,000 to 7,100 per month
• Additional Benefits: may offer equity or stock options.

Why Join Us?

• Opportunity to work in a hybrid role that combines creative and strategic responsibilities.
• Collaborate with a passionate team in a fast-paced, innovative environment.
• Contribute to impactful projects that directly engage with customers and drive business success.

If you are a forward-thinking professional with a passion for design and product strategy, we invite you to join our team and help shape the future of sustainable solutions.

Send your application to [email protected] to take the first step toward an exciting career with us.

Are you a talented Civil and Structural Engineer looking to take your career to new heights? We have an exciting opportunity that offers a generous remuneration package, unparalleled professional development prospects, and a clear path for upward progression.

The Role

The role reports directly to the team lead. He or She is responsible for supporting the Professional Engineers on the design and supervision of new erections, addition and alteration (A&A) work to existing buildings, earth retaining and stabilising systems, specialist designs for the facade, glass, demolition works etc, as well as temporary works. The role may also be required to conduct site inspections.

Responsibilities:

• Carry out detailed analysis and design of civil, structural, and geotechnical works;
• Prepare design calculation reports and structural drawings for authorities' submissions;
• Coordinate with various stakeholders such as clients, consultants, and contractors for projects; and
• Supervise and inspect construction works;

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Strong engineering fundamentals and analytical skills in geotechnical and structural analysis and design work would be an advantage;
• A good knowledge of the application of design and drafting software such as Autocad, Staad Pro, Plaxis, Prota, and Tedds would be an advantage;
• Candidates without working experience are welcome to apply.
• For more senior positions, at least 3 years of design experience for executive engineers and at least 5 years of design experience for senior engineers.
• Passing FEE 1 and FEE 2 are an advantage.

Vision:

To be a Civil & Structural (C&S) Consultancy firm recognised for innovative engineering solutions that are created in the course of work.

Mission:

To engineer construction solutions that create new values for all building stakeholders.

Benefits:

• Flexibenefits, Medical, rand Dental
• 13th AWS and Performance Bonus
• Group Insurance
• Training Grant and Education support,
• Miscellaneous allowance,
• Blue Sky Friday
• Bonding Events

Working Hours:

Regular hours, Mondays - Fridays

Dress Code:

Business (e.g. Shirts), Dress Down Day -Friday

Enlitho Pte Ltd (“Enlitho”) is a deep-tech precision engineering company that specialises in Micro-Nano Engineering services, with a focus on the Biomedical, Optics, and Photonics industrial sectors. As a Mechanical Design Engineer at Enlitho, you will fulfill a crucial role in the development and integration of systems for manufacturing micro-nano devices.

Core Responsibilities

The ideal candidate will be responsible for the following:

• Designing and developing system specifications and requirements and performing engineering design calculations
• Analysis and preparation of detailed drawings for machine layout, components and sub-assemblies
• Drafting of necessary documentation detailing system design, test procedures, results, bill of materials, project planning, etc.
• Engaging with vendors for fabrication of parts and procurement of components and hardware relevant to the system
• Contribute to system testing, assembly, calibration and maintenance.

Background

The candidate should have a minimum of 1 year of experience (3 years for diploma holders) in mechanical or automated system design and a degree/diploma in Mechanical Engineering or a similarly relevant discipline.

Ideal Skillsets

The ideal candidate possesses the following skillsets:

• Proficiency and experience in 2D & 3D CAD (Solidworks, AutoCAD, etc.)
• Strong analytical skills and good knowledge of structures and materials
• Experience and familiarity with machine control hardware such as motors, sensors, robots, motion and I/O controllers, as well as machine vision hardware such as cameras, lighting, lenses, etc.
• Strong background in the design and construction of mechanical systems, preferably in automated systems design
• Core IT literacy and proficiency with MS Office Applications

The following will be considered a bonus:

• Relevant experience with micro-fabrication, microfluidics or other similar micro-nano devices
• Relevant experience with semiconductor processes (lithography, etc.)
• Relevant experience with manufacturing and process line development

Job Highlights

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits

Job Description

Your Role

• Prepare and compile costing for building and interior works
• Attend all design consultations and site meetings
• Prepare high standards of 3D and AutoCAD Drawings, Material Boards
• Prepare schedule of finishes and project management schedules
• Brief and explain to contractors the proposed design intents and finishes
• Ensure quality and a high level of customer satisfaction

Job Requirements

• Experience in designing residential and hospitality projects
• Must possess skills in the following Computer-Aided Software Skills: Autodesk AutoCAD & Adobe Photoshop
• It is good to have the following skillset in Autodesk 3D Max, SketchUp, Vray
• Highly motivated, confident, and eloquent with good interpersonal skills
• Good communication skills
• Computer proficiency in Microsoft Office – Excel, Word, PowerPoint, etc

Perks/Benefits

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits
• Friendly Working Environment
• Good Career Growth

Interested candidates, please send your resume and portfolio to [email protected].

whatsapp: 85986715

Position: Furniture Design Partner

Pass: singaporean, PR or LTVP

Salary: $1000-$10000

None during working hours

Requirements: Relevant experience in furniture design

Location: 211 Henderson Rd

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Work as a team leader. Overall control the entire Design Department.
• Preparing Shop drawings, tender drawing, fabrication drawings, cutting list etc. 3D drawings. Monitor and control the progress and quality of drawings provided by the whole team.
• Attend meetings related to tender, design discussion, design optimization, critical design resolutions.
• Liaise with Client, Main Contractor, Architect and Consultants for design & technical issues.
• Oversee fabrication work and overall project coordination. Provide technical support and guidance to the project team on site.
• Stay updated with the latest industry trends and technologies in aluminium facade design
• Report to the Director.

Requirements:

• At least 6 year experience in Alum and Glazing Design design works.
• Responsible, with good organizational and communication skills. Able to work as a team leader.
• Strong understanding of building codes, standards and construction techniques
• Excellent attention to detail, problem-solving and communication skills
• Bachelor’s degree in architecture, Engineering or a related field and above.
• Singapore Citizen and Permant Residence are preferred. (Foreigners with relevant experience will also be considered)

Responsibilities:

• Skilled in developing, organizing, planning, and executing projects while adhering to budget and schedule constraints.
• Maintain communication with clients and project team members throughout the project, ensuring a smooth flow of information, particularly during the production phase.
• Manage subcontractors and suppliers, ensuring preparation, organization, and clear, respectful communication with all parties.
• Prepare work schedules for all projects.
• Monitor ongoing project progress and track key milestones.
• Work closely with Sales, Design, and Procurement teams to ensure efficient project execution and provide support for material sourcing when needed.
• Conduct site surveys and ensure that any project defects are addressed.
• Provide ad-hoc after-sales support as required.
• Occasionally provide quotations for projects.
• Maintain an organized filing system in collaboration with colleagues.
• Provide M&E drawings and ensure minimal disruptions to production processes, preventing financial loss, while managing the overall project production sequence.
• Adhere to the company’s SOPs and KPIs.
• Perform other ad-hoc duties as assigned.

Requirements:

• At least 1 year of experience in project management, renovation, or construction-related fields.
• Strong time management and organizational skills, with the ability to manage multiple projects at once.
• Excellent communication and interpersonal skills, enabling effective collaboration with various stakeholders.
• Proficiency in Google SketchUp and Autodesk AutoCAD is a plus.

Wecruit Pte Ltd | 20C0270

Tew Jie Wei | R22106822

You are responsible for designing, editing and production of corporate collaterals as well as support ongoing design needs for the department and other internal stakeholders. In addition, you will support key corporate photography and videography projects in KKH as well review video scripts and provide filming counsel.

Requirements:

• Degree holder or relevant Diploma with eight years’ experience.
• Certificate in Basic Photography.
• At least two years’ experience in graphic design, photography and videography.
• Able to operate, maintain and troubleshoot photography equipment.
• Good knowledge of editing software such as Adobe Photoshop, Illustrator, Lightroom, Canva etc.
• Knowledge of current and developing trends in photography and videography technology, methodology and technique.
• Excellent interpersonal skills.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description

As part of our system Engineering team, you play a key role in the design and development of our Inspection and Metrology machines. In your role you will work hands-on on the mechanical integration, process optimization and automation of the machine. Your work will involve integration of the mechatronic, optical and software building blocks and will hence work closely together with Mechanical design, Hardware, Optics and software teams.

It is your job to analyze customer requirements, build up a deep understanding of the problem and translate these into automated solutions that you detail clearly in measurable design requirements. To verify the solutions, you will build and test high-speed mechatronic setups for spec validation and critical parameter analysis. Once these are confirmed, you will coordinate the design and implementation in the different teams to eventually integrate tested modules and building blocks in the machine and assess the impact of the integration on the overall machine performance.

You get the chance to confirm high speed Pick and Place handling capabilities at key customers on site and broaden your customer and application know how along the way.

Furthermore you seek the challenge of understanding, analyzing, (re-)defining, and implementing sophisticated material handling flows until the level of detailed micro-sequences.

You will often write PLC level test sequences for mockup validation and data collection. Once the system is validated, translate these sequences into SW requirements.

As a senior system Engineer, you are considered as project/product owner. That means, besides technical work, you will also lead a multi-disciplinary team on project/product basis. You need to consider both technical but also commercial (e.g. budget, timeline, resource) aspects while managing your project/product.

Minimum Qualifications

• MS degree or BS degree with outstanding skill in electro-mechanical, electronics, software or mechanical engineering; with sound knowledge on basic software logics
• 5+ years relevant experience in an automation oriented engineering role in a high-end equipment company, covering most of following technical domains: machine conceptual and mechanical design, setting up specifications, PLC controller hardware and software design, user interface, SW (describing, testing of flows), conversion, test protocols, debugging, characterization, lead improvement projects
• Strong analytical capabilities
• Programming skills are a plus (PLC controllers, C, C++ Python, VBA, …)
• Independent thinking, challenging existing ideas and approaches
• Hands-on, self-organized, taking initiative and ownership
• Occasional travel within Asia & Europe
• Proficient in English

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and implement software solutions for automated semiconductor process equipment.
• Enhance equipment performance by implementing Continuous Improvement Processes (CIPs) and other development initiatives.
• Provide field support for upgrades and resolution of customer issues.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Duties & Responsibilities:-

• Responsible for project and site supervision, attend site meetings and co-ordinate with various stake holders, regulatory bodies, subcontractors and all related parties to ensure the smooth implementation/completion of project.
• Ensures completeness of documentation ie all changes to specifications/work scopes/drawings/etc are accurately documented.
• Assist in resolving challenges that may arise during project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance of safety regulations in accordance to industry standards.
• Efficient management of resources and materials.
• Manage manpower and overtime costs to ensure optimal.
• Ad hoc duties as assigned.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Project Executive

Working Hours: Monday-Friday (9.00 am - 6.00 pm)

Working Location: Bartley

Salary: $2500-$3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Remuneration package: Up to $5,800 Basic + AWS + Variable Bonus

• Working location: Woodlands

• Over 30 years of Reputable Automation Engineering Company

Responsibilities

• Provide a key role in the design, development & testing of industrial robotic machines & equipment
• Responsible for producing schematic drawings, creating electrical control systems, ensuring proper setup & tunning of control systems, & sourcing of control components

Requirement

• Diploma or Degree in Electrical Engineer or related
• Experience in designing & implementing of electrical control system

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Job Description:

1. Lead the team in designing, simulating, and documenting analog circuits and chip designs.

2. Oversee and optimize layout design and routing to enhance efficiency and quality.

3. Support product testing, debugging, and application development.

4. Mentor junior analog designers and prepare comprehensive design documentation.

Job Requirements:

1. Master’s degree or higher in Microelectronics or Electronic Engineering with over 10 years of relevant experience.

2. Expertise in designing analog mixed-signal circuit blocks, including bandgap references, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and circuits like de-emphasis, CTLE, DFE, and CDR architecture, as well as high-speed digital components (serializers, deserializers, counters, dividers, etc.).

3. Proficiency in high-speed interface protocols such as PCIe, USB, SATA, DDR, and LPDDR.

4. Advanced knowledge of analog mixed-signal design, with experience in high-speed serial and parallel circuits using cutting-edge processes (e.g., 3nm, FinFET, SOI, bulk CMOS).

5. Extensive hands-on experience with design tools and static timing analysis tools (e.g., Nanotime).

6. Strong problem-solving skills and a proven ability to deliver results within tight timelines.

Interested candidate may send your resume to [email protected]

Piping Design Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: S$ 2,500 - 3,500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Duration:

May 2025 - August 2025 (3 months)

Job Description:

We are seeking a talented and creative Visual Communication & Experience Design Intern to join our team. The ideal candidate should have an interest in niche fragrances. As an intern, your main responsibility will be to enhance the consumer experience visually, both online and offline, by effectively communicating and showcasing our Scent Journer fragrance products. Your role will involve utilizing your content creation skills to help consumers understand our products visually, without relying solely on the sense of smell. Additionally, you will contribute to increasing the average order value through visually appealing and innovative designs.

Responsibility:

• Visual Communication:

Develop creative and visually compelling content that effectively communicates the unique qualities and benefits of our Scent Journer fragrance products.

• Online Experience:

Collaborate with creative director to create visually engaging content for our website, social media platforms, and online advertising campaigns. Ensure the design elements align with our brand identity and enhance the consumer experience.

• Offline Experience:

Assist in the development of visually captivating packaging designs, point-of-sale materials, and other physical collaterals that effectively convey the essence of our fragrance products.

• Consumer Understanding:

Conduct research on consumer preferences, market trends, and competitor analysis to gain insights into visual communication strategies that resonate with our target audience. This include engage directly with customers to understand, gather feedback, and identify areas for improvement in the customer experience.

• User Experience Enhancement:

Opportunity for your input on design considerations in product development that enhance the overall consumer experience to be launch.

• Creative Problem Solving:

Develop innovative visual solutions to improve the consumer's understanding and engagement with our fragrance products, focusing on increasing the average order value. Intern will be involved in sales and pricing strategy too.

Requirements:

• Proficiency in Photoshop and Illustrator.
• Strong visual communication skills with a keen eye for detail and aesthetics, with strong creative and design skills.
• Demonstrated interest in luxury fragrances and knowledge of the fragrance industry.
• Proactive with the ability to handle multiple projects and prioritize tasks.
• Strong communication and interpersonal skills.
• Passion for understanding consumer behavior and translating it into impactful visual experiences.
• Ability to take direction, incorporate feedback, and iterate on designs.
• Confidence in interacting with customers to identify the visual communication gap.

Job Description
In your new role you will:

• Work as architect with system engineers to define IP specifications, architecture & test concept.
• Specify, rtl design and verify digital circuits in achieving high performance, low power, and efficient implementation for sensor IPs.
• Perform RTL design and behavioral model coding, Logic Synthesis, StaticTiming Analysis, and structural checks as LEC, Spyglass (Linting, CDC &RDC).
• Execute DFT/power integrity-related activities – Scan Insertion, ATPG &power analysis.
• Work with Physical designer to achieve timing closure and ECO fixes ifrequired.
• Conduct design reviews and support in documentation.
• Support verification engineer to define verification test items.
• Support in the roadmap formulation for the sensor IPs.
• Support view generation engineers to verify the correctness of the IPsviews.

Your Profile
You are best equipped for this task if you have:

• Bachelor/Masters Degree in Electrical Engineering or similar field with a focus on electronics.
• 8+ years of professional experience in the field of Digital Design with good knowledge of EDA tools (Cadence, Synopsys)
• Proven track record to formulate digital design architecture and concept& to work together in a team of designers.
• Proficiency in System Verilog and/or Verilog/VHDL for RTL design and verification tasks
• Familiar with the entire digital design flow as in LEC, Spyglass, defining constraints for synthesis, ATPG and primetime analysis.
• A good understanding of IP development flow , chip integration,timing-analysis, and testability.
• Knowledge in mixed signal IPs like ADC, PMU, oscillator and tempsensors would be an advantage.
• Basic Knowledge about Safety and Security standards and applications(e.g. ISO 26262 and ISO21434, respectively) – would be an advantage
• Good English communication and interpersonal skills.
• Strong analytical and problem-solving skills.