DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Responsibility:

To resume to role of a DfSP to conduct Design for safety risk assessment as per MOM guide

Requirement:

Bachelor degree in C&S / Architecture / Mechanical engineering or relevant

Certificate in DfSP

Experienced in conducting DfS risk assessment

*WSHO qualification is not relevant and will not be considered.

We are currently working with a leading semiconductor test and measurement equipment manufacturing MNC in expanding their PCB Design team. Targeting to add 4 headcounts to the team by end of 1st quarter 2025.
Reporting to Engineering Manager, the PCB Design Engineer/Senior Engineer will be responsible for:
Responsibilities:

• Conduct physical layout of PCBs, including component placement, routing, trace length adjustments, and verification.
• Utilize electrical knowledge in high-speed design, RF, and power to meet project specifications.
• Design for manufacturability by collaborating with PCB suppliers and implementing industry best practices to minimize costs and enhance yield.
• Test new internal design tools and provide feedback to the development team.
• Establish design processes aimed at reducing cycle times, minimizing defects, and enhancing product performance.
• Develop design documentation and training materials.

Requirements:

• Minimally Bachelor’s Degree or Diploma in Electrical/Electronics Engineering with a minimum of 4 – 6years of relevant PCB design experience.
• Particularly in analog and mixed-signal applications, and collaboration with PCB fabrication houses to improve manufacturability.
• Experience with blind, buried, and micro vias is a plus.
• Familiarity with logical net listings, schematic usage, electrical and routing rule creation, and signal/power integrity optimization.
• Experience in RF, backplane, and electrical package design/routing, as well as a background in semiconductor testing or the ATE industry, is advantageous.
• Proficiency in Cadence Allegro/Valor and/or PAD Power PCB, as well as Microsoft Excel.
• Strong communication skills, a sense of responsibility, attention to detail, and a collaborative mindset.

Benefits:

• Strong company branding within top 10 list.
• Competitive salary and comprehensive employee benefits.
• Hybrid work arrangement.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Develop innovative design solutions and solve engineering problems.
• Deliver parts to production on time, cost and to specification
• Produce functional prototype products suitable for testing, review and demonstration
• Develop detailed specifications and design requirements
• Develop tests to replicate anticipated usage and optimise products to be robust and high performing
• Perform analysis on test failures and develop efficient solutions

About you

• A degree in Mechanical Engineering discipline or equivalent with relevant professional experience
• A creative and considered approach to problem solving, following clear design processes
• 2 + years of industry experience
• Practical and methodical design development expertise through prototyping and testing
• Knowledge and understanding of a broad range of engineering and technological disciplines
• Proven examples of developing a technically challenging design
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team
• Ability to plan, prioritise and co-ordinate your own time
• Knowledge and understanding of multiple manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620

• Design and shop drawing preparation & submission of automatic fire sprinkler systems.
• Prepare shop drawings from contractual drawing issued by main contractors’ assigned projects.
• Prepare preliminary schemes, penetration drawings as needed.
• Be able to produce pipe schedule hydraulics of his assigned project.
• Have understanding of equipment used in connection with each project.
• Prepare reports to Design Manager of deviations from original Tender drawings.
• Provide clear path of communication & coordination between his counterparts and superiors.
• Any other duties that may be assigned by the company.

Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

(A) Essential Job Functions:

The Design Engineer (C&S) is responsible, but not limited to, the following:

• Coordination of civil/structural works for construction.
• To attend meetings with client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

• Machine design in Mechanical aspect
• Perform mechanical part detailing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Co-ordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Solidwork 3D software to do mechanical design
• Good knowledge and experience in machine automation
• Degree / Diploma in Mechanical Engineering

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm