• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.

We are seeking for a motivated Design Engineer specializes in the design, analysis, and coordination of building works in construction projects. These professionals work closely with architects, structural engineers, and construction teams to ensure compliance with design specifications, and collaborating with various stakeholders to achieve project goals.

Responsibilities:

• Prepare and complete precast shop drawings within specific time and in accordance with the project timeline.
• Check for accuracy and update amendments to precast shop drawings.
• Produce precast layout plans and fabrication shop drawings of precast concrete elements for production and submission to clients.
• Liaise with consultants concerning drawing details and technical issues.
• Liaise internally with production and suppliers on the submission/ issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Incorporate on the drawings (2D and 3D) and update any amendment openings and recesses, architectural features, cast-in-items, lifting system and any other relevant details.
• Coordinate Structural, Architectural and M&E drawings to check and highlight any discrepancy and raise RFI to finalize precast shop drawings for production.
• Request any detail required for precast shop drawings.
• Check every detail and ensure precast drawings tally with construction drawings.
• Attend technical meetings with consultants/clients as and when required.
• Perform any other ad-hoc duties assigned.

Requirements:

· Bachelor's degree in Building/Civil Engineering or related as recognized by PE Board.

· Minimum 5 years’ experience in site planning and coordination works for building projects.

· Minimum of 3 years of relevant practical experience in Precast design for building works in Singapore.

· Familiar with both structural detailing (including rebar detail) and basic architectural detailing.

· Proficiency in software (e.g., AutoCAD, Revit, TELKA or All Plan).

· Excellent organizational and time management skills.

· Strong communication and interpersonal skills.

· Attention to detail and a commitment to quality.

· Ability to work independently and as part of a team.

Job Description

• Design and implement computational / AI methods in Architecture, Engineering and Construction (AEC) domains;
• Research and prototype implementations of emerging digital technologies that can be harnessed in the AEC;
• Regularly document and explain decisions made in creating the prototype;
• Work in a team to actively contribute new ideas, technologies and insights regarding the development of AEC tech;
• Periodically attach to Architectural Design teams throughout the building design lifecycle to immerse in building design tasks to discover pain points and test solution prototypes;
• Schedule and organize user research / testing / feedback sessions.

Job Requirements

• Proficiency in Revit + Dynamo, Rhino + Grasshopper, or other parametric design software;
• Proficiency in Python, Typescript, C#/.NET;
• Proficiency in version control using Git;
• Experience in UI/UX.
  

Good to have Skills (in order of priority)

• Proficiency in Linux
• Proficiency in Containers e.g., Docker, Podman, Kubernetes
• Familiarity with the following:
• IFC (Industry Foundation Class) Spec
• APIs for Revit, Rhino, QGIS, Blender, SketchUp
• Web application development
• API development
• Experience in Ruby
• Experience in Databases such as SQL, MongoDB

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Job Responsibilities:

• Conduct site survey and prepare the drawing as per project requirements that complies to the SCDF regulations
• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc
• Prepare economics analysis, proposal and tender documents for submission
• Liaise with vendors/suppliers for price lists and up-to-date product and service information with the procurement team
• Familiarize yourself with Authority requirement and IEC standard or equivalent for renewable system installation)
• Coordinate closely with client site personnels and safety coordinators
• Liaise with other teams to gather feedback on design and costing for continuous improvement
• Produce design drawings like SLD, Panel and String Layout using AutoCAD software
• Ad hoc task assigned by the reporting officer
  

Job Requirements:

• Minimum Degree in Electrical Engineering/Renewable energy-related field is preferred
• Well versed with Autocad is a must. Familiar with PVSyst and Sketchup is a preferred
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectivel
• At least 1-2 years prior experience preferred but not required
• Knowledge in electrical design and solar engineering
• Driven, high energy individual who strives for success
• Strong technical understanding and troubleshooting skills
• Quick learner, goal-oriented team player with strong communication
• Interest in renewable energy and sustainability is a plus

Need 10 years of experience in the field, with at least 50,000 followers accross all social platforms. Team player, able to teach different students with different learning styles. We are a great team with a cohesive spirit, 6 months trial period will be implemented to see if you fit the team. Thank you for looking

Duration: Daily from 11 January to 19 January

Working Hours: 11:00 AM to 5:30 PM (6.5 hours/day)

Responsibilities:

• Supervise the gallery during operating hours.
• Ensure the safety and security of artwork on display.
• Assist visitors with any queries about the exhibits.

Requirements: To be properly attired (Smart Casual)

Location: 1 Straits Blvd, Singapore 018906

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Who We Are

The EDL Group is a leader in surfacing materials, serving architects and interior designers with cutting-edge solutions for stunning and functional spaces. Headquartered in Singapore, with a regional presence and over 200 employees worldwide, we pride ourselves on delivering innovative, design-led products that inspire creativity.

Job Description

We are looking for a Design Manager to spearhead our Graphic Design team and bring bold, innovative ideas to life.

Key Responsibilities

1. Strategic Planning:

• Collaborate with senior management to define the creative direction and align it with business goals.
• Develop and implement strategies to enhance the design team’s productivity and creativity.
• Ensure all creative outputs align with brand guidelines, company objectives, and marketing goals.

2. Internal collaboration:

• Work closely with internal stakeholders across departments to understand project goals and creative requirements.
• Act as the key point of contact for internal design needs, managing expectations and delivering high-quality results.

3. Concept Development & Execution:

• Drive brainstorming sessions to develop innovative ideas that meet internal objectives.
• Oversee the design process from concept to final delivery

4. Team Leadership:

• Lead, mentor, and inspire the graphic design team
• Provide constructive feedback and guidance to team members to elevate the quality of deliverables and foster professional growth.

Qualifications

• Proficiency in Adobe Creative Suite (Illustrator, Photoshop, After Effects, Premiere Pro, etc.) and other design tools.
• Experience in Print, Motion Graphics, and Digital Design (websites, social media, animations, videos).
• A strong portfolio showcasing a variety of projects, including print, motion, and digital designs
• Strong communication skills
• Capable of working independently and managing multiple projects and deadlines.
• A proactive mindset, passion for design, and eagerness to learn new skills.

Preferred Skills

• Expertise in typography, 3D design, or advanced motion graphics.
• Understanding of UX/UI design principles for digital projects.

What We Offer

• A dynamic and creative work environment.
• Opportunities for growth and development.
• The chance to lead and shape impactful projects

This role is responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications. This role defines regional product and system portfolios and create ways to fulfill such portfolio through local capability, partners and Envac AB HO & cross regional technical collaboration. This role actively interacts with commercial functions and customers to know the market trends and customer needs in order to fulfill such needs in a timely manner. This role protects ad define market position of Envac’s various product portfolio with strategic pricing schemes and drives the commercial team to achieve profitable growth with co-responsibility for profitability. The candidate will be reporting to the General Manager.

Key Responsibilities:

Products / Systems

Manage product life cycles including new products and accessory configuration update. Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements. Focus on Product and system Application Development for Southeast Asia and China. This is to broaden and differentiate Envac offers.

• The above scope includes technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design – (Have team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

-To attend technical review with sales team

-To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

-To attend coordination meetings with architects, M&E and structural consultants

-To coordinate and determine the level of pipe sleeve crossing under major roads

-To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc

-To determine the position and depth of launching pits that will aid the installation under major roads

-To study and highlight authority requirements during the meeting.

-To reply to HDB review form

-To reply to NEA BP, DC, WD Advise

-To produce preliminary drawings to aid the tender process for main contractor

-To prepare drawings for PWCS QP endorsement

-To prepare drawings for Acoustic Consultant’s specifications

-To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

-To attend technical meetings with main contractors

-To coordinate pipe clashes with M&E and structural services

Design Support

-To generate fabrication drawings for non-standard equipment

-To monitor project design submission schedule

-To allocate work assignments to other designers

-To check designs, shop drawings done by other designers

-To hold trainings to designers

Job Responsibilities

• To respond, follow up and complete design requests on time.
• To understand project requirements and produce designs for proposals and tenders, collaborating with Sales and Operations Teams to clinch projects.
• To take on special customized projects whenever required
• To ensure information are properly handed over to Sales and Operations Teams, in accordance to client’s requirements and ensuring all installation compliance
• To visit Clients with Sales/Operations team for presentations, networking etc.
• To assist Design Manager to perform any other related projects and duties as required.

Job Requirements

• Degree in Architecture or equivalent
• Preferably 2 years of working experience in design, landscape, architecture, or any related field
• Software Skill(s): Revit, Autocad, Lumion, Sketchup, Photoshop, 3Ds Max.
• Creative and has technical knowledge in basic construction design
• Able to create design concept and narrative for Design Proposals

Job Purpose:

The Design Manager will play a pivotal role in enhancing the unique style and personality of The Standard, Singapore. Working closely with the property and Corporate Design Team, you will support the property’s design initiatives, focusing on furniture, small construction projects, signage, maintenance of existing designs, and assisting in design development. Your creativity will be key to ensuring that every visual element aligns with The Standard’s vibrant and distinctive brand.

Duties and Responsibilities:

• Collaborate with Teams: Work closely with the Management Team to ensure that all spaces meet the specified standards and that public areas are always "in show" status.
• Maintain Design Integrity: Partner with Housekeeping, Engineering, and Food & Beverage teams to ensure that interior design standards are consistently met. This includes ensuring all rooms, displays, layouts, structures, signage, and event setups are visually up to par.
• Lead Property Tours: Conduct weekly property tours with department heads to report on active, pending, and completed projects impacting guest experience, ensuring they are aligned with brand integrity.
• Project Reporting: Assist in clear and accurate reporting of design projects across all departments, ensuring ongoing communication and understanding.
• Design Execution: Execute all design-related projects as specified by the corporate design team, including material sourcing, vendor selection, budget management, and creating maintenance manuals.
• Vendor Coordination: Schedule, follow up, and oversee outside vendor projects in a professional manner.
• Procurement and Inventory Management: Manage the processing and tracking of Purchase Orders, coordinate furniture placement, landscaping maintenance, and oversee tools and materials needed across the property. Maintain and organize inventory of all fixtures, furniture, and equipment on and off property.
• Support Marketing and Events: Collaborate with the marketing team on the physical and creative setups for activations and events, ensuring design consistency.
• Installations and Communication: Coordinate on-site installations and communicate work schedules with relevant departments.
• Material Sourcing: Source new and replacement materials for projects, whether locally, nationally, or internationally.

Skills and Qualifications:

• Bachelor’s degree in Interior Design, Architecture, or a related field.
• 2-4 years of interior design experience, preferably within hospitality or lifestyle brands.
• Strong project management skills with the ability to manage multiple tasks and meet deadlines.
• Proficiency in Adobe Creative Suite, Microsoft Office, CAD, SketchUp, and similar design software.
• Ability to read and interpret construction documents, floor plans, and understand spatial relationships.
• Knowledge of basic wood and metal finishes and general contracting terms.
• Excellent communication skills in English, both verbal and written.
• Highly organized with extreme attention to detail.
• Ability to work independently and as part of a team with a positive attitude.
• Adaptability and the ability to thrive in a fast-paced environment, meeting project needs and expectations.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Key Responsibilities:

• Create conceptual designs and presentations, including mood boards, sketches, and 3D models.
• Develop detailed design plans, floor layouts, and specifications.
• Engage with clients to understand their requirements, preferences, and goals.
• Present design concepts and ensure client approval at every stage.
• Coordinate with architects, contractors, and suppliers to ensure seamless project execution.
• Manage project timelines and budgets, ensuring all deliverables meet quality standards.
• Source and recommend materials, furnishings, and fixtures that align with the design vision and budget.
• Stay updated on market trends and innovative materials.
• Ensure designs comply with safety, accessibility, and building code requirements.
• Prepare and submit necessary documentation for regulatory approvals.
• Work closely with other designers, drafters, and project coordinators to achieve project goals.
• Provide guidance and feedback to junior team members as required.

Qualifications:

• Proficiency in design software such as AutoCAD, SketchUp, 3D Max, Revit, or similar tools.
• Strong understanding of space planning, materials, and design principles.
• Excellent visualization skills with attention to detail.
• Candidates with no experience are welcome to apply.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.