Senior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols. As a senior member of the engineering team, you’ll have the opportunity to lead projects with the support of a cross-functional team of RF engineers, technicians, software engineers, etc.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 8 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Senior IT Business Analyst/Product Design
Duration: 12 Months (convertible to perm)
Location: Beach Road


YOUR RESPONSIBILITIES:

• Lead program/project requirements and design sprints to define business and technical requirements through design implementation.
• Manage the requirements delivery (planning, estimation, risk management, reporting) to succeed in meeting overall program/project delivery.
• Leverage business knowledge to advise features/requirements priorities to delivery leads and/or product owners.
• Gather requirements by facilitating/coordinating meetings and conversations between business users, product owners, designers, SMEs, tech leads, and other relevant stakeholders.
• Identify people and systems impacted by functional and non-functional requirements.
• Collaborate with AI-enabled tools and methodologies to ensure requirements are effectively integrated into AI-supported workflows.
• Create/gather acceptance criteria in user stories and prepare any requirements specifications.
• Validate AI-generated outputs, ensuring alignment with business objectives and compliance with pre-set rules.
• Proactively engage, manage, and build strong relationships with clients and stakeholders.
• Work closely with Developers, DevOps engineers, Designers, and QA teams during all phases of the development lifecycle.
• Participate actively in mob programming sessions to facilitate AI-supported collaboration and contextual alignment among team members.

Requirements:

• Degree in Information Technology or equivalent.
• Relevant domain: Financial Institution, Retail, E-Commerce, Environmental, Social, and Corporate Governance (ESG).
• With more than 5 years of working experience in IT business analysis, including experience in AI-driven workflows or collaborative AI-enabled team structures.
• Good understanding of enterprise applications or prior experience in various tech products/development stacks is ideal but not mandatory.
• Strong familiarity with AI tools such as ChatGPT, GitHub Copilot, Jira Automation, or other AI-enabled platforms is a plus.
• Participated in full software or product development cycles.
• Knowledge and experience of Agile development practices.
• Experience working within teams or other high-collaboration environments is highly desirable.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of a senior engineer if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit Television, Gas Detection and Fire Alarm systems with the support of a senior engineer if necessary;
• Design of Information Technology cabling system with the support of a senior engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of a senior engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submissions including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Requirements

• Minimum 4 years of relevant experience
• Good technical knowledge and understanding of Engineering Design and Construction for Basic Electrical Equipment and distributions concepts
• Basic knowledge of Project execution processes.
• Advanced knowledge of local code of practice of design implementation.
• Local construction knowledge

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Deliver sub-assemblies to production on time, cost and to specification.
• Develop detailed specifications and design requirements for interdependent systems
• Identify and design test requirements to replicate anticipated usage and optimise products to be robust and high performing.
• Build functional prototype products suitable for testing, review and demonstration
• Perform and review analysis on test failures and develop efficient solutions
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

• A degree in a relevant Engineering or Science discipline or equivalent
• 4+ Years of experience in a relevant role, working on complex and challenging technical problems
• A creative and considered approach to problem solving, following clear design processes
• A practical and methodical approach to design using an iterative development cycle of prototyping and testing
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team and across a business
• A demonstrable desire to constantly improve yourself including evidence of self-development
• Knowledge and understanding of a broad range of manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

Working Hours: Monday-Friday, 9.00 am - 6.00 pm

Working Location: Novelty Techpoint, Singapore 536212 (Bartley)

Salary: $2500 - $3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.