· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

As the Marketing & Design Intern, you will be assisting the Communications Director in developing content and doing market research for a new business.

You will be assisting in:

- Social Media management

- Designing and development of content using Canva

- Website editing

- Learning Management System management (on TalentLMS.com)

You must:

- Have an eye for detail

- Have good written and/or spoken English

- Be able to do market research and present findings

- Be able to work independently

- IT-savvy is a plus

If you are trustworthy, efficient, and able to work independently, there are opportunities to work flexibly and on independent projects.

NO experience needed. FRESH GRADS WELCOME :)

A semiconductor and Automation company.

• Working days: 5 days
• Location: AMK
• Benefits: AWS, Bonus, Annual leave etc.

Responsibilities

• Conduct equipment Design & Development
• Responsible for equipment specifications & buyoffs
• Able to keep to project schedule and resolve design issues in a timely
  manner.
• Generate 2D/3D drawings in details.
• Participate actively in assembly, installation, operation and troubleshooting of equipment.
• Support service team at customer's site in equipment maintenance & training.

Requirements

• Degree in Mechanical Engineering
• Minimum 4 years of relevant experience in semiconductor or automation equipment design
• Proficient with 2D/3D CAD software (preferably SolidWorks)
• Able to travel overseas within short notice

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Highlights

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits

Job Description

Your Role

• Prepare and compile costing for building and interior works
• Attend all design consultations and site meetings
• Prepare high standards of 3D and AutoCAD Drawings, Material Boards
• Prepare schedule of finishes and project management schedules
• Brief and explain to contractors the proposed design intents and finishes
• Ensure quality and a high level of customer satisfaction

Job Requirements

• Experience in designing residential and hospitality projects
• Must possess skills in the following Computer-Aided Software Skills: Autodesk AutoCAD & Adobe Photoshop
• It is good to have the following skillset in Autodesk 3D Max, SketchUp, Vray
• Highly motivated, confident, and eloquent with good interpersonal skills
• Good communication skills
• Computer proficiency in Microsoft Office – Excel, Word, PowerPoint, etc

Perks/Benefits

• Opportunities to work on award-winning projects
• Performance bonus for high-performer
• Good medical benefits
• Friendly Working Environment
• Good Career Growth

Interested candidates, please send your resume and portfolio to [email protected].

whatsapp: 85986715

Position: Furniture Design Partner

Pass: singaporean, PR or LTVP

Salary: $1000-$10000

None during working hours

Requirements: Relevant experience in furniture design

Location: 211 Henderson Rd

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Enlitho Pte Ltd (“Enlitho”) is a deep-tech precision engineering company that specialises in Micro-Nano Engineering services, with a focus on the Biomedical, Optics, and Photonics industrial sectors. As a Mechanical Design Engineer at Enlitho, you will fulfill a crucial role in the development and integration of systems for manufacturing micro-nano devices.

Core Responsibilities

The ideal candidate will be responsible for the following:

• Designing and developing system specifications and requirements and performing engineering design calculations
• Analysis and preparation of detailed drawings for machine layout, components and sub-assemblies
• Drafting of necessary documentation detailing system design, test procedures, results, bill of materials, project planning, etc.
• Engaging with vendors for fabrication of parts and procurement of components and hardware relevant to the system
• Contribute to system testing, assembly, calibration and maintenance.

Background

The candidate should have a minimum of 1 year of experience (3 years for diploma holders) in mechanical or automated system design and a degree/diploma in Mechanical Engineering or a similarly relevant discipline.

Ideal Skillsets

The ideal candidate possesses the following skillsets:

• Proficiency and experience in 2D & 3D CAD (Solidworks, AutoCAD, etc.)
• Strong analytical skills and good knowledge of structures and materials
• Experience and familiarity with machine control hardware such as motors, sensors, robots, motion and I/O controllers, as well as machine vision hardware such as cameras, lighting, lenses, etc.
• Strong background in the design and construction of mechanical systems, preferably in automated systems design
• Core IT literacy and proficiency with MS Office Applications

The following will be considered a bonus:

• Relevant experience with micro-fabrication, microfluidics or other similar micro-nano devices
• Relevant experience with semiconductor processes (lithography, etc.)
• Relevant experience with manufacturing and process line development

Your new company

My client (located in the North) is a leading provider of innovative technology solutions and manufacturing services.

Your new role

Below are some of the key responsibilities for the role;

• Spearhead technical assignments in research, design, and development of electrical hardware products, encompassing electromechanical devices, components, and systems.
• Conceptualize and develop innovative hardware, circuits, and software solutions, ensuring feasibility and efficiency.
• Collaborate in design reviews, offering expertise in design for manufacturability and assembly.
• Create and release engineering documentation, communicating with vendors to expedite design parts and assemblies.
• Drive the design of AC/DC power distribution systems, including circuit breakers, power supplies, and cabling harnesses.
• Develop, test, and document designs, ensuring compliance with safety standards and customer requirements.
• Estimate product and project parameters, including power consumption, weight, size, and schedule.
• Facilitate a seamless transition from engineering to production, collaborating with manufacturing and other organizations.
• Interface with customers to understand technical requirements and propose quality solutions.
• Troubleshoot electrical issues on-site, demonstrating excellent problem-solving skills.
• Assist engineering management in developing schedules and specifications for new and legacy products.
• Maintain cutting-edge technical knowledge and direct engineering and technical support personnel as needed.

What you'll need to succeed

The successful candidate, should have;

• Educational Background: Bachelor's Degree with 6 years of experience or Master's Degree with 3 years of experience in Electrical/Electronics/Mechatronics Engineering.
• Technical Expertise: Working knowledge of electrical systems, motion, temperature measurement, PID loops, and safety interlock circuits.
• Design Experience: Dynamic electromechanical system design and proficiency in OrCAD, AutoCAD, PCAD, SolidWorks, or similar 3D CAD software.
• Safety Knowledge: NFPA, Semi Safety Requirements, and Machine safety.
• Communication Skills: Excellent written and verbal English and effective communication skills.

What you'll get in return

• Joining a company that is at the forefront of our industry
• Working with a talented and ever-evolving team
• Enhancing your skills while working on exciting and challenging projects

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

The primary role of a Design Manager is to manage all design work required during construction projects. This includes overseeing the production of technical drawings and plans used to build a structure. You ensure that all designs are produced on time and to a high quality and that they are coordinated with the work of architects, engineers and technicians. You also oversee the design process using technical expertise to ensure that designs meet the client’s expectations.

all designs are reviewed with health and safety in mind. You work closely with the design team to identify any potential risks and hazards and ensure that they are addressed in the design process. You also ensure that all designs meet all relevant health and safety regulations and standards.

Design Manager, you will need a related subject, such as architecture, construction management, construction project management, design management, or architectural technology.

Requirements:

• must possess technical skills and knowledge in construction design and project management.
• knowledge of design software, such as AutoCAD and BIM
• familiar with construction drawings and specifications.
• knowledge of construction materials and methods, building codes and regulations, and sustainability standards.
• excellent analytical thinking skills, be able to think critically and solve problems.
• possess strong leadership and motivational skills to manage the design team and ensure that projects are completed successfully.

1. Responsible for overall planning and coordination of the development work from conceptualization, design in architectural drawings with 3D max, 3D Studio, SketchUp, Photoshopand Auto-Cad, budgeting, scheduling and quality standrards.

2. Coordinate with revelent authorities & owners till project is complete.

3. Site monitoring till project is hand over.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Description & Requirements

1. Design Direction and Presentation:

a. Provide design guidance, creative direction, and innovative proposal to meet client requirements.

b. Present and effectively communicate design intent during client pitches and project discussions.

2. Client Management:

a. Efficiently handle multiple projects concurrently, overseeing them from start to finish, including sales, design, and execution phases.

b. Ensure that projects are completed on time and meet client expectations.

3. Design Implementation:

a. Conceptual design for pitching projects, including mood board, rendering.

b. Translate design concepts into detailed plans, ensuring that aesthetic intent aligns with technical feasibility.

c. Collaborate with design principal, and clients, qualified Persons and vendors to refine and finalize design details.

d. Collaborate with MEP engineers to ensure the seamless integration of mechanical, electrical, and plumbing systems within the interior design.

e. Produce comprehensive construction drawings, including floor plans, elevations, sections, and details, with a focus on precision and clarity.

4. Building Management Submissions:

a. Prepare and submit drawing package required for approvals from building management.

b. Coordinate with QP for submission to relevant authorities.

c. Manage the submission process, tracking progress, and ensuring timely approvals.

5. Project Design Coordination:

a. Coordinate with project teams to integrate architectural, structural, MEP, and interior design elements seamlessly.

b. Coordinate with procurement team to select feasible materials for design implementation.

c. Collaborate with Project Leaders from project initiation to completion, offering design expertise and insights.

d. Attend adhoc meetings related to design and project matters, including client meetings, project meetings, and site visits.

e. Monitor the implementation of design intent on-site and provide guidance or recommend design changes as necessary.

6. As-Built Submissions:

a. Ensure that all design changes and solutions are seamlessly integrated into project documentation.

b. Oversee the creation of accurate as-built drawings, reflecting the final state of the project post-construction.

c. Ensure that as-built submissions are complete and comply with relevant industry standards.

Requirements:

1. A recognized Degree/Diploma in Interior Design or an equivalent qualification.

2. Proficiency in a range of design-related software, including Hand Sketch, Sketchup, AutoCAD, and similar tools.

3. A minimum of 5 years of relevant experience in commercial design, showcasing strong technical knowledge in areas such as shop drawings, site surveys, and detail drawings.

4. Proven experience in managing projects from start to finish, encompassing sales, design, and execution.

5. Exceptional flair for creative design and a meticulous eye for design details.

6. Highly proactive with outstanding coordination and execution skills.

7. A collaborative team player with excellent communication abilities.

8. Demonstrated ability to meet and exceed expectations while adhering to tight deadlines.

9. Willing to travel overseas

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

• Proficient in AutoCAD, PhotoShop and Sketchup, Enscape or VRay.
• Experience in design development, tender, specification and construction drawings.
• Excellent interpersonal and communication skills, self-motivated, hardworking, meticulous willing to work independently and as a team.
• Project Site Experience.

Requirements:

2-4 years relevant working experience.

Diploma/ Degree in Architecture or related field.

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements.
• Manage multiple projects concurrently from design stage to project completion.
• Ensure project team's current workflow practices are in line with company standards and proposed improvements.
• Establish good working relationships with different parties to promote continued partnerships.
• Support the procurement of new business.

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Key Responsibilities

Preparation and present DFM (Design for manufacturing)

Construct the Tool design assembly layout

Prepare and issue 2D detail insert & mould base drawing with appropriate tolerance for manufacturing

Tool design must be manufacturability and can estimate cycle time base on as design

Tool design concept able to run production efficiently with lowest cycle time

Tool design capable to run auto cycle

Assist in Customer Engineering Change

Continual improvement on the tool concept

Conduct tool design review to present his / her design concept

Endorse and release tooling drawing to tool room for mould manufacturing

Raise Purchase requisition for the tooling related direct and indirect purchase

Any other duties and responsibilities delegated by superior

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

A Design Project Manager in Singapore is responsible for overseeing and coordinating design projects from initiation through to completion, ensuring that design processes meet client requirements, timelines, budgets, and quality standards. This role often involves managing teams of designers, architects, engineers, and other specialists while working closely with clients and stakeholders.

Here are the key duties and responsibilities of a Design Project Manager in Singapore:

1. Project Planning and Strategy:

• Define project scope: Collaborate with clients and stakeholders to understand and define the project’s objectives, deliverables, and key performance indicators (KPIs).
• Create project timelines: Develop detailed project plans with timelines, milestones, and deadlines.
• Set budgets: Establish project budgets, including resource allocation for design teams, equipment, and materials.
• Manage scope changes: Handle any changes to the project scope and update project plans and budgets accordingly.

2. Team Leadership and Coordination:

• Lead design teams: Manage and supervise multidisciplinary design teams, including architects, designers, engineers, and other professionals.
• Delegate tasks: Assign responsibilities to team members and ensure that they have the resources and guidance needed to meet project goals.
• Monitor progress: Track the progress of design deliverables to ensure timelines and quality standards are met.

3. Client and Stakeholder Communication:

• Client liaison: Maintain regular communication with clients to understand their needs, gather feedback, and ensure the design aligns with client expectations.
• Present designs: Present design concepts, updates, and progress to clients and stakeholders through meetings, reports, and presentations.
• Manage expectations: Ensure that clients' expectations are properly managed and met, addressing any concerns or issues promptly.

4. Design Oversight:

• Design coordination: Oversee the design development process, ensuring the quality and consistency of the design work across all stages of the project.
• Ensure design feasibility: Ensure that the proposed designs are feasible within the given budget, timeline, and technical constraints.
• Maintain design standards: Ensure that designs adhere to relevant industry standards, codes, and regulations in Singapore.
• Approve design changes: Evaluate and approve design modifications, ensuring that they align with the overall project objectives.

5. Budget and Resource Management:

• Resource allocation: Allocate resources (design staff, tools, software, etc.) efficiently to meet project needs.
• Budget management: Track and manage the design budget, ensuring that resources are utilized efficiently without exceeding financial limits.
• Cost optimization: Identify opportunities for cost-saving without compromising the design quality and functionality.

6. Risk Management:

• Identify risks: Identify potential risks associated with the design phase, including delays, cost overruns, or technical challenges.
• Mitigation plans: Develop and implement risk mitigation strategies to minimize the impact of identified risks.
• Problem resolution: Resolve issues related to design, scheduling, or budgeting that may arise during the project lifecycle.

7. Quality Assurance and Control:

• Monitor design quality: Ensure that design outputs meet the required quality standards, as defined by the client, regulations, and industry best practices.
• Conduct reviews: Organize regular design reviews to assess progress, identify any quality issues, and make necessary adjustments.
• Implement feedback: Incorporate feedback from clients, stakeholders, and the project team to improve the design process and outcomes.

8. Contract and Vendor Management:

• Manage contractors: Work with contractors, vendors, and third-party service providers to ensure design requirements are met.
• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers and vendors involved in the design process.
• Vendor coordination: Ensure that external partners, such as consultants or material suppliers, meet the design specifications and project schedules.

9. Compliance and Legal Requirements:

• Adhere to regulations: Ensure that all design processes and outputs comply with Singapore’s legal, environmental, and building regulations.
• Obtain necessary approvals: Ensure that all design documents, plans, and approvals are in line with regulatory requirements and are submitted to the appropriate authorities.

10. Project Reporting and Documentation:

• Progress reporting: Provide regular progress reports to senior management and clients, including updates on design, timelines, and budgets.
• Documentation: Ensure all design documentation is accurately maintained and archived for future reference.
• Post-project review: Conduct post-project evaluations to assess the design process and identify areas for improvement for future projects.

Skills and Qualifications:

• Design Expertise: Strong knowledge of design principles, architecture, and industry-specific design software (AutoCAD, SketchUp, Adobe Creative Suite, etc.).
• Project Management Skills: Ability to manage multiple projects simultaneously, with experience using project management tools (e.g., Microsoft Project, Trello, Jira).
• Leadership and Teamwork: Ability to lead and inspire design teams, and work collaboratively with stakeholders, clients, and contractors.
• Communication Skills: Strong verbal and written communication skills to present design concepts and ideas effectively.
• Problem-Solving Abilities: Ability to solve complex design and project-related issues efficiently.
• Budget Management: Experience in managing budgets, cost estimating, and financial reporting.

Roles & Responsibilities

We are looking for a highly experienced and skilled Design Manager with minimum of 8 years of experience. The candidate should have a proven track record of managing design teams on projects for large scale of Design in international background. The Design Manager must be well-versed with project requirements and standards.

Responsibilities:

Ensure designs meet project specifications, client expectations and company standards within a timeline.

Oversee the entire design process, from concept through to detailed design and construction documentation.

Coordinate with multidisciplinary teams, including architects, engineers, and consultants.

Foster a collaborative and productive team environment. Provide mentorship and guidance to junior designers.

Conduct regular meetings and presentations to update the team (and clients if necessary) on project progress and address any concerns.

Ensure client requirements are accurately captured and reflected in the design.

Implement and enforce quality control procedures to ensure the highest standards of design.

Review and approve design documents, drawings, and specifications.

Conduct regular design audits and peer reviews to maintain quality and consistency.

Ensure all designs comply with relevant regulatory requirements and standards. Stay informed about the latest industry trends, technologies, and best practices.

Requirements:

Bachelor’s degree in Civil Engineering, Architecture, or a related field.
Master’s degree is preferred.
Minimum of 8-10 years of relevant experience in civil engineering or architecture. Proven experience in managing design teams on complex projects.
Experience in the design of residential and mixed use developments is preferred. Strong leadership and team management skills.
Excellent communication and interpersonal skills.
Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
Strong problem-solving and decision-making abilities.

As a fast-paced, growing business; this role will be responsible for significantly contributing to projects to deliver excellent service levels to clients and assist in the ongoing development and growth of the business, whilst providing sound technical, design and contract management support.

They should comply with B&W Engineering’s standards, procedures, process and implementations to ensure project requirements and clients’ specifications are fully met. Have the ability to demonstrate extensive experience in a wide range of technical areas and have a sound level of knowledge at Senior Engineer level.

Desirable experience would include the management of Data Centre projects..

Role Responsibilities and Requirements

Degree or higher in appropriate engineering discipline or have sufficient equivalent experience.

IES Electrical and Electronics Engineering Professional Membership desirable.

Singapore Professional Engineer registration or progress towards beneficial.

Proven experience in working within and running projects within a multi-disciplinary team with the successful delivery of the design for critical projects.

Experience in project management and MEP engineering track record with some experience of data centres or other critical engineering facilities.

Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc

Knowledge of Dialux, Trimble (Amtech) Etap /AutoCAD/Revit/ BIM/CAD calculation software.

Ability to use IT based calculation and spreadsheet software.

Significant experience in production of drawings, calculations, schedules & specifications for a range of building types

At least 5 years overall experience with 3 years Data Centre design

Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial

Demonstrate a thorough understanding of the design process.

Peripheral experience in architecture, structures, civils, security and permitting.

Excellent understanding of the various code requirements and standards across the APAC region.

Sound knowledge of key Health and Safety issues and legislation including Singapore Design for Safety (Dfs)

Ability to keep clear and accurate records and reports.

Understand and maintain the long-term goals of the business.

Understand the company QA process, maintain and contribute to the same standards across the APAC region

Ability to work autonomously, as part of a wider team.

Ability to embrace an intensively collaborative design environment working for and reporting daily to an expert client.

Ability to proactively step outside the role of conventional design regiment and stages to achieve the client’s deliverables.

Flexible and willing to travel to service international projects and customers.

Possess exceptional clear communication skills and command of spoken/written English.

Have an appreciation of different cultures/races and embrace the same.

Be a motivated, highly dependable

Maintain an appropriate knowledge of industry initiatives.

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114