ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

As part of IME Integrated Circuit Design and System Department, we are looking for a candidate with relevant experience in ultrasound imaging system design. This candidate will define an ultrasound transducer array beamformer IC architecture for imaging applications. The candidate will work closely with MEMS team on system architecture, circuit design, simulation, validation, and integration.

Role & Responsibilities

• Perform system-level beamformer architecture, design, and simulation, to derive circuit-level design specifications.
• Beamforming array optimization using AI algorithms.
• Design and implementation of beamformer algorithm in hardware.
• Work together with team to investigate novel circuit/system solutions to create new inventions.

Requirements

• Master’s / PhD degree in Electrical Engineering or equivalent
• Good understanding of ultrasound imaging systems and beamforming theories.
• Knowledge of AI algorithms and implementation will be a plus
• Familiar with IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Scratch is a design and build consultancy that is focused on developing holistic spaces in the built environment for residential and commercial applications.

We are looking for design oriented self-starters, with high level of attention to detail and curiosity for innovation.

Project Managers to be Involved in:

1. Project coordination and site planning, handling of schedule and timelines.

2. Purchasing with suppliers, and delivery coordination with quality assurance.

3. Communication with team and stakeholders with 3D and 2D CAD visualisation and drawings.

4. Client coverage and to develop a close relationship with all stakeholders throughout duration of project.

This position reports to the project director and interfaces with design and projects team, contractors, suppliers and clients.

Technical Skills and Competencies:

- Active participation in strategic planning process, including developing goals and objectives.

- Active learning in project management software, while forecasting effective management of stakeholders.

- Active familarisation in 2d and 3d visualisation software.

- Active coordination of various subs, elements, sourcing and fabrication within the project.

- Self motivated and willingness to learn.

Scratch is committed to an employee-orientated, high performance culture that emphasises empowerment, quality, continuous improvement, and the recruitment and on-going development of a superior workplace.

This position is open for both recent graduates and mid-career individuals (mature and non mature).

Graduates interested in this position should possess a Degree and above qualification.

Mid-career individuals from any qualification level can apply.

Interns can apply for traineeship positions.

Benefits:

• Competitive salary
• Health and wellness allowance
• Paid time off and holidays
• Opportunities for professional growth and development
• Collaborative and creative work environment

How to Apply:

Please submit your resume, portfolio, and a cover letter outlining your experience and design philosophy to [email protected]

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Job Duties
- On-job training on teaching techniques, drawing demonstration, colour coordination
- Composition layout and colour scheme of lesson plan will be provided and briefed everytime before the classes begin
- Teach children age 3 to 8 years old to draw and paint according to our drawing layout and lesson plan
- Small group class, 2 to 4 students per teacher
- Work on every Sunday 9:15am to 2:45pm regularly for at least six months
- Pay $10 per hour, ½ hour lunch not paid

Requirement:
- proficient in both drawing and painting, especially subjects / styles that are appealing to kids, 'O' level art or equivalent
- have great patience
- enjoy working with children
- fluent in spoken English

Please email/whatsapp ([email protected]/9692 9495) to us the following about you
1. address, contact number
2. artworks (please also include some cartoon illustration)
3. experience in teaching and working with children
4. art or design qualification
5. current occupation (please state course if still studying)
6. highest education qualification (if different from 4.)
7. Photo

This is a multi-position posting for interior designers as we are seeking 2 positions with different experience levels.

General Duties

• Design driven with experience in show flat, residential and/or hospitality projects
• Have good excellent communication skills
• Ability to resolve technical issues in line with the project's design intent
• Creative thinking to develop new ideas, space planning, design development, and produce construction drawing for fabrication.
• Manage budget and deadlines on agile projects

Qualifications

• Diploma or Degree in Interior Architecture/Interior Design
• Minimum 2 years of professional experience (Remuneration shall be discussed based on experience)
• Proficiency in Autocad, SketchUp, Enscape, Photoshop and MS Powerpoint.
• Entry level are welcome to apply for the junior position.

Please email your resume and portfolio to [email protected].

Job Description:

· Produce mood, material & design presentations for internal & consultant meetings.

· Work independently from conceptual design, design development & space planning.

· Produce schematic design (Draft sketches, technical drawings on AutoCad, 3D views on SketchUp),

· Work with project managers during installation works to ensure that output matches with design.

Requirements:

· Degree of related fields preferred (Diploma holders with experience may apply).

· Requires communication with peers & fellow craftsmen.

· Candidates expected to be highly driven, responsible and self-motivated.

· Minimal 3 to 5 years' of work experience, preferably with experience in sales client facing function.

(Renumeration with CPF, will vary based on experience and portfolio)

• Ability to cut and lay tiles following tiles setting out plan. drawings able ties seting pid and read layout plans, and stiles in dify withorserlevel, consistent grouting
• Screeding of tiles base with trowels using waterproofing
• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms · Tap tiles into place carefully using tools to properly adhere tiles to the base
• Follow blueprints precisely and mark and measure surfaces that need to be tiled.

Print Art Director
Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Nearest MRT: Outram Park / Harbourfront)

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park - Nearest MRT: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description & Requirements

• Production of CAD and BIM Revit model for MEP works.

• Maintain the 3-D BIM data and complexity of content to meet project deliverable requirements.

• Work with BIM and Site Project Team for relevant M&E required model and drawing (e.g., Shop drawings, CSD drawings and As-Built drawings).

• To notify BIM Team and Project team to all M&E design issues and assist in solving clashes in BIM model and CSD drawings.

• Support the project BIM team by monitoring and providing quality check on sub-contractors BIM Model Submissions.

• Assist project Site M&E Coordinator on preparation materials for technical meetings with Clients, Consultants and Sub-contractors.

• Assist the QS department in quantifying M&E items in Model.

• To assist and ensure BEP and Standard Modelling is followed by all stakeholders.

• To strictly follow Model elements and LOD requirements as determined in the Bim Execution Plan.

• Model elements to the appropriate standards at each project stage.

• Clash Detection Report and interface checking for all M&E together with Other Trades.

• Utilize internal coordination and clash detection procedures as part of the normal modelling process.

• Communicating issues back to project team.

• To produce Quality Shop drawings/CSD Drawings for submission.

• To provide Quality BIM model interface.

• Any other duties that may be assigned.

Job Overview

Semiconductor devices are the necessity in our modern life. In Aurigin, we are a team of brilliant people designing and manufacturing automated systems in the Semiconductor industry. We are continuing to grow big and fast. We are inviting passionate Hardware (Electrical / Electronics) Engineers to join in this journey with us.

Responsibilities and Duties:

• Design and create system architecture, electrical schematic, wiring diagrams, IO map, PLC code, panel layouts and PCB boards for automation machines
• Create electrical bill of materials (BOM), spare part list, installation instruction manual, maintenance guides
• Perform machine system set up, IO check and trouble-shooting of electrical system
• Perform circuit simulations/analysis, design, development, testing and debugging of circuit board and embedded firmware
• Create PCB board bill of materials (BOM), Gerber file, assembly drawing, schematic drawing, technical design documentation, simulations/analysis report, test report
• PCB prototype board making and debugging
• Manage all electrical material including PCB boards according to machine production assembly schedule
• Perform firmware and PLC code maintenance, bug fixing and enhancement
• Provide technical support, and training on electrical system of automation machine
• Supervise the workmanship of electrical technician and contractors to ensure the build quality of automation machine

Requirements

• Degree in Electrical/Electronic Engineering, Diploma with minimal 2 years experience are welcome
• Good knowledge on electrical Design
• Proficiency in Eplan software
• Able to analyse project requirements, develop electrical schematics, wiring diagrams, and layouts
• Experienced in design to conformity with safety, regulatory standards such as CE, UL, VDE, CSA and SEMI-S2
• Excellent in PCB design with analogue/digital circuit and lighting
• Able to develop circuit board with RS232, RS485, I2C, SPI, USB, Ethernet
• Able to use simulation tools (example: Pspice/ LTspice/ TINA)
• Excellent in Microchip assembly and C/C++ programming languages
• Good programming skill of PLC
• Good soldering skill and electrical wiring harness skills
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Project management skills with the ability to manage priorities, timelines, and resources effectively
• Good in written and spoken English
• Work as a team member in a multi-discipline engineering team