Teacher needed!!!

• Primary Art

Part Time: $20 to $35 per hour (commensurate with experience)

Working hours:-

Part Time: Mon to Fri between 9am to 3.30pm

Locations: Central West

Responsibilities:

• Prepare and conduct lessons according to the course syllabus and scheme of work
• Provide necessary supervision to the students and report students’ discipline issues to the Student Affairs staff
• Schedule and prepare examination papers and assignments
• Monitor the performance and progress of each student, including academic counselling
• Give feedback to Management about the continual improvement of the class performance
• Mark and grade all course work, assignments and examination papers
• Give feedback to Management on the course proceedings at the end of semester/course/modules
• Participate in programme review meetings

Requirements:

• Minimum a Diploma
• At least 1 year of relevant experience

HOW TO APPLY:

Please send in your resume to: [email protected] & indicate in the subject as "Primary Art Teacher (Part Time, Central West)".

**PLEASE INDICATE YOUR EXPECTED SALARY RANGE**

We regret that only shortlisted candidates will be notified.

DIS Manpower Pte Ltd

EA License No.: 08C3226

EA Personnel: Sng Wei Lin

Reg No.: R1101806

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Requirements:

1) Recognised Bachelor’s degree or equivalent in Structural Engineering, recognized by the Professional Engineer Board, Singapore.

2) Minimum 2-5 years of design experience in a consulting Environment

3) Strong engineering analysis and design skills and knowledge.

4) Competent in common engineering design software and analytical tools.

5) Knowledge of BIM and drafting for general Civil & Structural drawing is an added advantage.

6) Strong in structural and geotechnical principals and good knowledge of EURO codes.

7) Competent in conventional concrete and structural steel works design.

8) Good planning, organizational, writing and communication skills.

Job Description :

1) Assist and support Team Leader in the execution of projects as part of the project team.

2) Provide technical support in various stages of project, including conceptual design, design development, contract documentation, authority submissions, contract administration, site meetings, etc.

3) Participate in BIM coordination with the assistant of the BIM team.

4) Prepare schematic design, layout, calculations, technical reports and specifications, etc.

5) Conduct feasibility study, engineering assessment and prepare technical report. Liaise with clients, architects, contractors and suppliers to resolve project issues.

6) Carry out site inspections and technical reviews, when necessary.

7) Design management and participation in the successful delivery of projects.

8) Attend meetings, reporting and design matters.

9) Liaise with fellow Engineers and/or Consultant team.

Job description:

• Managing pneumatic system portfolios & dealing with technical specification and definition of industrial systems, products and solutions including system and product design
• Providing engineering solutions & handling technical & products issues
• Leading design team to come up with better system design and ensuring design meet market needs
• Providing sales & project & design support
• Ensuring company profitability and aligning with global product strategy

Basic salary up to $8000

5 days work week

Multinational corporation

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

• Designing tailored solutions for new deals and renewals based on client needs
• Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings
• Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure
• Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery
• Identify and implement process improvements to drive efficiency and success
• Attend and actively participate in client briefings pitches, locally, regionally and globally
• Utilise project management tools and techniques and drive innovation through technology enabled solutions
• Enable continuous improvement for existing clients and projects

Who you are:

• With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.
• An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems
• Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors
• You are energetic, committed and results oriented
• You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

• Work with some of the world’s leading and most recognised brands
• Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)
• Flexibility is at the core of who we are, and flexible work arrangements are encouraged
• Quarterly and annual recognition programs to celebrate our employee’s success
• We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

We are looking for an experienced, energetic and creative individual to join our dynamic advertising agency.

Art Director (Print)
(Singapore)

Responsibilities:

· Able to lead the print team and oversee development of work for consumer/corporate client campaigns and projects

· Strong in conceptualising and proposing innovative print ideas (ATL/BTL/TTL)

· Oversee the day-to-day work of the design team and provide art direction guidance

· Able to work on several projects simultaneously

Requirements:

· Bachelor of Arts In Graphic Design, Fine Arts or equivalent from an accredited art/design school or university

· Excellent interpersonal and presentation skills

· Min. of 3 years professional experience as an Art Director in print, web and design creative

· Outstanding portfolio with Regional/Local clients

· Must be proficient in all the Design software – Photoshop, Illustrator, InDesign, Freehand, Flash

· Sound knowledge in production processes

Benefits:

- Medical & Hospitalisation Coverage;

- Smart Casual Work Attire;

- Confirmed staff get an additional day off monthly (on top of Annual Leave)

Interested applicants please send us your CV, expected remuneration and a softcopy of your portfolio to [email protected]

Only shortlisted candidates will be notified.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Senior Design Engineer, you will be working within a fast paced and exciting field with a dedicated inspiring workspace focused on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

Responsibilities include:

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products.
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

​

About You

We are on the lookout for a dynamic and skilled Senior Design Engineer to join our team. You will be enthusiastic about engineering and product design, bringing a robust technical foundation and a passion for developing innovative solutions. You take pride in your craft your craft and thrive in a fast-paced, collaborative environment. Key skills and attributes you will bring to the role include:

• A degree in a relevant engineering, product design, science discipline or equivalent.
• At least 2-3 years’ experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate with work of others.
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

As a Lead Design Engineer, you will be focussed on developing products depending on advanced robotics and artificial intelligence technologies. Within Upstream Robotics you will be a crucial member of a dynamic team to help meet and exceed the requirements of our products and embedded technologies. You will be working closely with other engineers, designers, scientists, specialists, downstream teams and other cross functional teams to create and develop new technology, product formats and business cases for projects in our portfolio.

What we need you to do…

• Designers will be expected to initiate new product concepts and ideas and identify market opportunities from a blank sheet of paper.
• Be responsible for leading key pieces of complex technology/product sub-assemblies that help to define the specification of future products;
• Produce working concepts for reviews with the use of handmade or prototype parts.
• Produce mechanical designs across a range of device types and technologies to deliver our product performance specifications while considering cost, manufacturing, and time delivery.
• Be responsible for 3D CAD and design requirements of mechanical systems of mechanical systems from concept, through evaluation to downstream delivery. Take an active role in defining design specifications for a given concept.
• Liaise and collaborate with the suppliers to develop innovative, robust and scalable technology platforms.
• Use hand calculations and/or computer simulation to validate designs through the development process, backed up with lab-based testing / characterisation / validation.
• Analyse test results, summarise and communicate these with both technical and non-technical colleagues.
• Challenge and develop Dyson engineering practices to continuously improve design quality.
• Define plans, monitor progress and report to management on technical risks.
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.
• Own/contribute to team/department level initiatives & change projects.
• Influence - you’ll need to be able to convince stakeholders at all levels of the business.

About you

• A degree in a relevant engineering, product design discipline or equivalent.
• 5+ years’ industry experience
• Sound understanding of basic mechanical/product design principles and the development of products and technologies through prototyping and testing.
• Proven ability to communicate through a variety of media.
• Ability to plan, prioritise and co-ordinate your work, and others
• Technical and personal credibility to work effectively in cross-functional design teams throughout the project development cycle.
• Basic knowledge and understanding of multiple tooling and manufacturing techniques.
• Proven experience of delivering creative design solutions that improve upon existing product designs.
• A creative and considered approach to problem solving, following clear design processes.
• Practical and methodical design development through hands on rig building, prototyping, and testing.
• Ability to plan ahead, prioritise tasks and coordinate with the work of others.
• Good commercial awareness with pragmatic approach to balance cost and value.
• A self-starter who thrives in a fast-paced, collaborative environment
• A passion for user focused design.

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job Title: Site Support Coordinator

Location: Singapore
Job Type: Full-Time
Reporting to: Interior Design Manager

Job Overview

We are seeking a reliable and detail-oriented Site Support Coordinator to assist with site monitoring, customer interactions, and contractor communication.

The primary focus of this role is to follow instructions precisely from the Interior Design Manager and ensure tasks are executed as directed. This position involves taking photos and measurements on-site, documenting progress, and coordinating with Mandarin-speaking contractors. The work is a combination of on-site and remote tasks.

Key Responsibilities

• Follow Instructions:Take detailed and clear instructions from the Interior Design Manager and execute tasks as directed.
  
• Site Documentation:Capture clear and organized photos and videos of the site to document progress and current conditions.
  Ensure all visuals are labeled and shared promptly with the project team.
  
• Measurements:Accurately measure the site as instructed and report findings to the manager.
  
• Customer Feedback & Defects:Collect feedback from owners and share it with the project team.
  Walk through the site with owners to identify defects and document them for follow-up.
  
• Contractor Coordination:Communicate instructions to Mandarin-speaking contractors as required.
  Relay updates from contractors to the Interior Design Manager for timely action.
  
• Reporting:Submit daily updates, including photos, measurements, and any feedback collected.
  Maintain simple logs of completed tasks and observations.
  

Why Join Us?

• Gain experience in site operations and project coordination with clear, straightforward responsibilities.
• Work in a flexible role that combines on-site and remote tasks.
• Be part of a supportive team focused on delivering high-quality interior design projects.

Qualifications

• Language Skills: Fluent in English and Mandarin to communicate effectively with mandarin speaking contractors and team members.
• Experience: No prior experience required; training will be provided.
• Skills:Strong ability to follow instructions accurately and execute tasks precisely.
  Basic photography and measurement skills.
  Comfortable navigating construction sites and interacting professionally with contractors and clients.
  
• Other Requirements:Physically capable of conducting on-site inspections.
  Reliable, punctual, and detail-oriented.
  

Application

If you excel at following instructions and are eager to support site operations with diligence and attention to detail, we encourage you to apply.

Submit your resume and a brief statement about your interest in this role.

Join us as a Site Support Coordinator and play a vital role in ensuring project success through precise execution of tasks and clear communication.

Solution Design and Implementation Lead

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

- Designing tailored solutions for new deals and renewals based on client needs

- Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings

- Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure

- Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery

- Identify and implement process improvements to drive efficiency and success

- Attend and actively participate in client briefings pitches, locally, regionally and globally

- Utilise project management tools and techniques and drive innovation through technology enabled solutions

- Enable continuous improvement for existing clients and projects

Who you are:

- With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.

- An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems

- Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors

- You are energetic, committed and results oriented

- You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

· Work with some of the world’s leading and most recognised brands

· Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)

· Flexibility is at the core of who we are, and flexible work arrangements are encouraged

· Quarterly and annual recognition programs to celebrate our employee’s success

· We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Duties and Responsibility

· Create, develop & update BIM model either from scratch or existing supplied 2D CAD or PDF drawings.

· Ensure model quality and identify any conflict between disciplines.

· Generate & update Revit-based plans, sections, elevations and details that can be used as design analysis, tender drawing, drawing for Authority submission, shop drawing, fabrication drawing and as built drawing.

· Generate 3D centre-line model for structural Engineer to perform analysis.

· Maintenance & implementation of company’s BIM standards, Facade template, contents and library

· Any other ad hoc duties as assigned by Supervisor

Knowledge, Skill and Abilities

· Must have at least basic knowledge in Facade design. Experience in BIM submission to authority is must.

· Proficient in Revit. Knowledge in other BIM software is added advantage.

· Must have a good time management.

· Must be able to work with minimum supervision

· Must be knowledgeable, keen and observant in worksets and worksharing function of BIM.

· Must be a team player and with good working attitude

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.