As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job Title: Site Support Coordinator

Location: Singapore
Job Type: Full-Time
Reporting to: Interior Design Manager

Job Overview

We are seeking a reliable and detail-oriented Site Support Coordinator to assist with site monitoring, customer interactions, and contractor communication.

The primary focus of this role is to follow instructions precisely from the Interior Design Manager and ensure tasks are executed as directed. This position involves taking photos and measurements on-site, documenting progress, and coordinating with Mandarin-speaking contractors. The work is a combination of on-site and remote tasks.

Key Responsibilities

• Follow Instructions:Take detailed and clear instructions from the Interior Design Manager and execute tasks as directed.
  
• Site Documentation:Capture clear and organized photos and videos of the site to document progress and current conditions.
  Ensure all visuals are labeled and shared promptly with the project team.
  
• Measurements:Accurately measure the site as instructed and report findings to the manager.
  
• Customer Feedback & Defects:Collect feedback from owners and share it with the project team.
  Walk through the site with owners to identify defects and document them for follow-up.
  
• Contractor Coordination:Communicate instructions to Mandarin-speaking contractors as required.
  Relay updates from contractors to the Interior Design Manager for timely action.
  
• Reporting:Submit daily updates, including photos, measurements, and any feedback collected.
  Maintain simple logs of completed tasks and observations.
  

Why Join Us?

• Gain experience in site operations and project coordination with clear, straightforward responsibilities.
• Work in a flexible role that combines on-site and remote tasks.
• Be part of a supportive team focused on delivering high-quality interior design projects.

Qualifications

• Language Skills: Fluent in English and Mandarin to communicate effectively with mandarin speaking contractors and team members.
• Experience: No prior experience required; training will be provided.
• Skills:Strong ability to follow instructions accurately and execute tasks precisely.
  Basic photography and measurement skills.
  Comfortable navigating construction sites and interacting professionally with contractors and clients.
  
• Other Requirements:Physically capable of conducting on-site inspections.
  Reliable, punctual, and detail-oriented.
  

Application

If you excel at following instructions and are eager to support site operations with diligence and attention to detail, we encourage you to apply.

Submit your resume and a brief statement about your interest in this role.

Join us as a Site Support Coordinator and play a vital role in ensuring project success through precise execution of tasks and clear communication.

Solution Design and Implementation Lead

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

- Designing tailored solutions for new deals and renewals based on client needs

- Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings

- Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure

- Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery

- Identify and implement process improvements to drive efficiency and success

- Attend and actively participate in client briefings pitches, locally, regionally and globally

- Utilise project management tools and techniques and drive innovation through technology enabled solutions

- Enable continuous improvement for existing clients and projects

Who you are:

- With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.

- An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems

- Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors

- You are energetic, committed and results oriented

- You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

· Work with some of the world’s leading and most recognised brands

· Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)

· Flexibility is at the core of who we are, and flexible work arrangements are encouraged

· Quarterly and annual recognition programs to celebrate our employee’s success

· We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity

Print Art Director | 5 Days | ATL/BTL | Advertising Firm | Raeburn Park

Working days & hours: 5 days, Monday - Friday
Location: Raeburn Park, Singapore (Nearest MRT: Outram Park / Harbourfront)

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Work Location: Tan Kah Kee

Working Hours:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 30 minutes lunch break

• Fridays: 9:00am to 5:30pm, inclusive of 30 minutes lunch break

Contract Period: 16 January 2025 TO 15 January 2026

Job Description

Art:

Main duty:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal

2.To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)

3.To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.

4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters

5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.

6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)

7. To assist in photo-documentation of students at work for purposes of T&L review

8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

Main duty:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)

2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking

3. To supervise students at work on occasions when teaching staff is not around.

4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.

5. To assist in setting up for lessons in terms of instruments / computer / electronic set up

6. To assist in setting up of video cameras for practical examinations

Job Requirement

The Personnel shall minimally have the following qualifications, skills and experience:

a. Good communication and interpersonal skills

b. Good team player with a high level of initiative and independence.

c. Proficient in MS Office and Excel

d. Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students. The Personnel should preferably have the following qualifications, skills and experience:

e. Qualification: Full GCE O Level certificate or its equivalent

f. Have some prior experience in a makers space or art studio environment

g. Have prior experience working on several projects or several teams concurrently.

EA: 22C1322

EAP: R24124011

Job description:

• Have more than 2 to 3 years of experience in video game production
• Able to independently complete the 2D graphics of slot machine games
• Design of characters, symbols, scenes, UI and grand prize fonts, etc.
• Early development stage_Assist in collecting art materials
• Provide the art team with excellent, clear production direction art materials
• Mid-term development_Suggestions on Southeast market preferences
• Provide the team with theme and art design suggestions for the Southeast slot machine market
• Phased report_Survey on online slot games in Southeast Asia
• Continuously track and study the preference trends in the Southeast slot machine market

Necessary conditions:

• Have art experience related to SLOT game development, and understand SLOT mechanisms and rules
• Develop and deliver high-quality art assets based on production needs and deadlines
• Work with the team to ensure style and quality meet specifications and project feedback
• Provide technical and local support to the team when needed
• Do not exclude AI technology from joining process development

Bonus points conditions:
Be familiar with the application of AI art tools ComfyUI and WebUI

Museum Art & Co is currently accepting applications for both part-time and full-time Art Curator Associate (E1) positions to deliver a knowledgeable, thoughtful, and inspiring customer service experience that plays an integral role in achieving the stores' sales and metric goals.

Proactively engages with customers to drive conversion and sales and create a memorable customer experience.

Responsibilities:

1. Creates a highly positive experience for customers that supports the store mission and encourages repeat visitation for Museum Art & Co Gallery.

2. Proactively engages with customers to drive conversion and sales and create a memorable customer experience.

3. Maintains a professional and positive presence on the sales floor.

4. Responds to customer inquiries and assist in making selections.

5. Executes daily stock maintenance by ensuring that all merchandise and fixtures are signed, displayed, lit, and clean.

6. Participates in physical inventory.

7. Perform in-store product demos from time to time to engage customers (training to be provided).

8. Performs any other duties reasonably related to the functions described above.

Requirements:

Minimum A Levels education required.

No work experience in retail sales required (Training will be provided).

Committed to delivering a high level of customer service.

Strong verbal, organizational, and communication skills.

Able to perform physical tasks as needed.

Interest in design, jewelry accessories, books, museum art, and architecture is desirable.

Fluency in a foreign language is a plus.

POS, Email, and Inventory Management Systems.

Ability to work afternoon and weekend hours.

*Note: Please include a resume. Applications without a resume will not be considered.*

Shortlisted applicants will be notified via email or call.

Teacher needed!!!

• Primary Art

Part Time: $20 to $35 per hour (commensurate with experience)

Working hours:-

Part Time: Mon to Fri between 9am to 3.30pm

Locations: Central West

Responsibilities:

• Prepare and conduct lessons according to the course syllabus and scheme of work
• Provide necessary supervision to the students and report students’ discipline issues to the Student Affairs staff
• Schedule and prepare examination papers and assignments
• Monitor the performance and progress of each student, including academic counselling
• Give feedback to Management about the continual improvement of the class performance
• Mark and grade all course work, assignments and examination papers
• Give feedback to Management on the course proceedings at the end of semester/course/modules
• Participate in programme review meetings

Requirements:

• Minimum a Diploma
• At least 1 year of relevant experience

HOW TO APPLY:

Please send in your resume to: [email protected] & indicate in the subject as "Primary Art Teacher (Part Time, Central West)".

**PLEASE INDICATE YOUR EXPECTED SALARY RANGE**

We regret that only shortlisted candidates will be notified.

DIS Manpower Pte Ltd

EA License No.: 08C3226

EA Personnel: Sng Wei Lin

Reg No.: R1101806

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

■OVERVIEW

We’re looking for a Business Development and Marketing Specialist in Singapore to drive brand growth by connecting local businesses with design services for the Japanese market. This role involves strategic outreach, event participation, and collaboration with our Japan team to build strong client relationships and achieve 12 new projects annually.

■RESPONSIBILITIES

Role Purpose
Drive Brand Growth: Expand the design company’s brand presence among Singaporean businesses looking to enter Japan, with a focus on strategic marketing and relationship-building.
Annual Goal: Achieve 12 new projects by positioning the company as the go-to partner for design services in the Singapore-to-Japan business landscape.
Daily Tasks and Workflow (Flowchart Style)

＜Earlier stage>
1. Market Research & Brand Positioning
Research Local Market Trends → Identify Emerging Needs and Gaps for businesses expanding to Japan.
Develop Targeted Outreach Campaigns: Use insights to craft campaigns highlighting how design services can meet clients' strategic goals.
2. Lead Generation & Brand Outreach
Execute Targeted Outreach: Identify and connect with key decision-makers through LinkedIn, email campaigns, and phone calls.
Promotional Meetings: Showcase how the company’s design solutions enhance brand perception and customer engagement for companies aiming for the Japanese market.
3. Event Marketing
Participate in Exhibitions and Networking Events: Act as a brand ambassador, building awareness of the company’s design expertise and creating lasting connections.
Post-Event Campaigns: Follow up with attendees to solidify the company’s presence and encourage lead conversions.

＜Middle and later stage>
4. Customer Relationship & Engagement
Develop Personalized Client Journeys: Engage clients through tailored marketing materials, case studies, and success stories.
Gather Customer Insights: Collect and analyze feedback to refine marketing messages and enhance service appeal.
5. Collaboration with Japan HQ for Campaign Execution
Create Cohesive Marketing Materials: Work with the Japan team to develop client proposals, case studies, and branded presentations.
Coordinate for Seamless Campaigns: Ensure that marketing efforts are aligned across regions to maximize brand consistency.
6. Retention Marketing & Client Follow-Up
Nurture Ongoing Relationships: Engage past clients with email updates, new service promotions, and case studies on successful projects.
Build Loyalty Programs: Develop and execute campaigns to maintain interest and foster repeat collaborations.

■REQUIREMENTS

-Experience: 2+ years in business development, or marketing, ideally within creative, design, or related industries.
-Market Knowledge: Familiarity with Japanese business culture or experience working with Japanese clients is a plus.
-Event Participation: Experience in networking, attending trade shows, or industry events to generate leads and promote brand presence.
-Collaboration Skills: Proactive in coordinating with cross-functional teams, especially with remote teams such as the Japan headquarters.
-Goal-Oriented: Self-motivated with a track record of achieving revenue targets or business development KPIs.
-Tech Skills: Proficiency in Design tools and social media marketing tools

■PREFERRED SKILLS

-Communication Skills: Strong verbal and written skills to engage and build rapport with clients and present design services effectively.
-Client-Focused Mindset: Ability to understand client needs, propose tailored solutions, and provide excellent post-project support.
-Language Proficiency: Fluency in English is required; Japanese language skills are a bonus but not mandatory.

■SALARY/ GURANTEE

SGD 4,000 ～4,500 （MONTH） Open & Negotiable

We are looking for a highly experienced and skilled Design Manager with minimum of 8 years of experience. The candidate should have a proven track record of managing design teams on projects for large scale of Design in international background. The Design Manager must be well-versed with project requirements and standards.

Responsibilities:

Ensure designs meet project specifications, client expectations and company standards within a timeline.

Oversee the entire design process, from concept through to detailed design and construction documentation.

Coordinate with multidisciplinary teams, including architects, engineers, and consultants.

Foster a collaborative and productive team environment.

Provide mentorship and guidance to junior designers.

Conduct regular meetings and presentations to update the team (and clients if necessary) on project progress and address any concerns.

Ensure client requirements are accurately captured and reflected in the design.

Implement and enforce quality control procedures to ensure the highest standards of design.

Review and approve design documents, drawings, and specifications.

Conduct regular design audits and peer reviews to maintain quality and consistency.

Ensure all designs comply with relevant regulatory requirements and standards.

Stay informed about the latest industry trends, technologies, and best practices.

Requirements:

Bachelor’s degree in Civil Engineering, Architecture, or a related field.

Master’s degree is preferred.

Minimum of 8-10 years of relevant experience in civil engineering or architecture.

Proven experience in managing design teams on complex projects.

Experience in the design of residential and mixed use developments is preferred.

Strong leadership and team management skills.

Excellent communication and interpersonal skills.

Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).

Strong problem-solving and decision-making abilities.

Secretlab is endeavoring uncharted waters by exploring exciting new product categories. Our commitment to innovation and excellence has positioned us as a leader in our industry. As we continue to expand our product portfolio, we are seeking a talented and passionate project lead to join our dynamic team.

Position Overview:

The PCB Designer will spearhead the design and development of PCB’s. This pivotal role entails team leadership, ensuring projects align with quality benchmarks and deadlines.

Experience:

• 3+ years of experience in PCB design, with a proven track record of successfully designing and manufacturing complex PCBs.
• Experience with high-speed digital circuits, analog circuits, RF circuits, or power electronics is a plus.
• Strong experience with industry-standard PCB design tools (e.g., Altium Designer, Cadence, Eagle, or similar).
• Familiarity with design for manufacturability (DFM) and assembly (DFA) guidelines.

Skills:

• Proficiency in schematic capture, PCB layout, and routing techniques.
• Understanding of signal integrity, high-speed circuit design, and electromagnetic interference (EMI) mitigation.
• Experience with power distribution design, thermal management, and grounding techniques.
• Knowledge of PCB fabrication and assembly processes, including surface-mount technology (SMT) and through-hole components.
• Familiarity with component libraries, part creation, and footprint design.

Qualifications:

• Bachelors degree in electrical engineering, computer engineering or related field.
• 8+ years of progressive leadership experience in engineering teams with expertise in audio DSP engineering.

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Leading provider of semiconductor equipment

Senior Design Engineer

Responsibilities:

• Manage mechanical design team

• Ensure mechanical design process meets schedule

• Conduct transforming, conceptualization and design review session with internal design team

• Continuous review, development, enhance and improve company products

• Provide technical support and solutions to products inquiry

Requirements:

• Degree in Mechanical, Mechatronics Engineering or equivalent

• Minimum 8 years of design experience in factory automation design

• Minimum 3 years in design supervisor experience

• Experience in semiconductor equipment handler will be an added advantage

• Analytical minded with strong organizational skills

• Proficient in using 3D software

• Able to effectively, interact with a variety of personnel at all organizational level and customers

Interested applicants, please email detailed updated resume in MICROSOFT WORD format and indicating your current salary and expected salary to:

[email protected]

David Lim

Principal Consultant/Manager

Registration No.: R1102027

[email protected]

FA Search Pte Ltd (lic no. 07C4794)

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Duties and Responsibility

· Create, develop & update BIM model either from scratch or existing supplied 2D CAD or PDF drawings.

· Ensure model quality and identify any conflict between disciplines.

· Generate & update Revit-based plans, sections, elevations and details that can be used as design analysis, tender drawing, drawing for Authority submission, shop drawing, fabrication drawing and as built drawing.

· Generate 3D centre-line model for structural Engineer to perform analysis.

· Maintenance & implementation of company’s BIM standards, Facade template, contents and library

· Any other ad hoc duties as assigned by Supervisor

Knowledge, Skill and Abilities

· Must have at least basic knowledge in Facade design. Experience in BIM submission to authority is must.

· Proficient in Revit. Knowledge in other BIM software is added advantage.

· Must have a good time management.

· Must be able to work with minimum supervision

· Must be knowledgeable, keen and observant in worksets and worksharing function of BIM.

· Must be a team player and with good working attitude

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.