Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

(A) Essential Job Functions:

The Design Engineer (Geotechnical) is responsible, but not limited to, the following:

• Coordination of Geotechnical works for construction.
• To attend meetings with Client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Role:

You are a Reckless Ericka ambassador with a passion for our products.

You are a driven individual with the ability to be hands-on, have keen eye for details and are open to giving and receiving feedback.

You will play a crucial role in being exceptionally creative and work alongside the Designer to support areas in Sourcing and Production.

Key Responsibilities(Production):

• Support logistical needs via tracking, receiving packing and unpacking of samples shipments.
• Manage production sample fitting and photoshoot samples to ensure that tasks are executed timely and accurately.
• Attend any quality complaints and feedback, investigate issues, and ensure timely responses.
• Receiving and processing Orders, new stock, replenishments, returns, damages and transfers, as well as all stock-take exercises (studio).
• Opening, conduct quality check and packing new stocks to ensure that it meets Reckless Ericka's standards and specifications.
• Investigate defect issues with Designer.
• Ensure stocks tally online and onsite.
• Ensure overall tidiness and housekeeping of stock baskets and studio sales floor.

Key Responsibilities(Designer's Assistant):

• Have a user-centric, thoughtful approach to gathering insights (through focus sessions and surveys) and solving for customer needs
• Understand our market, targeted customer personas, and good design principles through research and customer studies.
• Prepare moodboards, designs, sketches and technical packs for collection development.
• Keep all tracking systems promptly updated providing effective visibility to the Designer.

Requirements:

• Weekdays (except PH), adjustable hours as long as present during our core working hours - 8+1h between 8am to 8pm.
• Effectively bilingual in English and Mandarin (spoken).
• Experience in fashion or creative related studies.
• Have a good understanding of Reckless Ericka's creative vision and our target customers.
• Proactively acquiring knowledge regarding company general information, fashion news, new product information, customer feedback and staff communication.
• Good working knowledge of Adobe Photoshop and Illustrator.

How to Apply:
Please submit your CV, portfolio (if applicable), and a cover letter detailing your relevant experience and why you’re the perfect fit for our team.

Email to: [email protected]

Please state the positon you are applying.

We thank all applicants for their interest; however, only shortlisted candidates will be contacted.

Senior Design Engineer work in conjunction with Clients, Consultant, Contractors and Sub-Contractors in order to oversee the design and construction of a project. Additional responsibilities include reviewing project bids, review of design drawings, checking and submission of shop drawings and arch materials for approval, and accurate representation of the best interests of the overall project is a major aspect of the coordinator's duties.

Key Accountabilities :-

• Coordination with Client, Consultant, System Wide Contractors and Architectural Sub-Contractors
• Compliance with various regulations by the government and requirements set by the client
• Review and interpret plans, provide schedules, check shop drawings and method statements, submit architectural materials for approval, provide progress report to client
• Oversee various Architectural Sub-Contractors work, highlight interfacing with various SWC, comply with schedules, meet the standards of client
• Assist consultant and client to carry out Architectural RI inspection
• To ensure all works are carried out in line with LAIO health and safety standards in order to provide high quality works in a safe and efficient manner

Requirement:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Architecture or equivalent
• At least 5 Year(s) of working experience in the related field is required for this position
• It is a requirement to have Civil Infrastruture and LTA MRT Project experiences
• Exposure to design and building contract
• Able to work independently with minimum supervision
• Strong interpersonal skills and ability to communicate at all levels
• Required Skill(s): MS Office, Computer Literate (Microstation, AutoCAD 2D and 3D), report writing

Responsibilities:

• Understand project requirements and design concepts to translate conceptualise design ideas into drawings
• Prepare layout plan, 2D construction Drawing, shop drawings, section details, space planning in fast-paced work environment
• Work closely with interior designer and sales designer to deliver high quality work
• Revise drawings and layouts to accommodate changes and enhancements
• Perform other duties as assigned by the superior

Requirements:

• Junior position at least 1 year and senior position at least 3 years experience
• Passionate in interior design, and able to manage new and existing projects to achieve project objective
• Required Skill(s): Autocad, Photoshop
• Can do attitude and able to multitask & work independently with minimum supervision
• Candidates who can start work immediately or on short notice will have an added advantage (Singaporean & Permanent Resident preferred)

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities:

• Fully responsible for Netlist-to-GDS physical design implementation of low power chips

Requirements:

• Bachelor/Masters Degree in Electrical/Computer Engineering
• 3-6 yrs Experience in physical design with tape-outs
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC or Encounter
• Good in script programming with Perl, TCL/TK or other languages

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Roles and Responsibilities

• Financial Record ManagementMaintain and update accurate financial records and accounts.
  Record day-to-day financial transactions, including income and expenses.
  
• Financial ReportingPrepare financial statements, including balance sheets, income statements, and cash flow statements.
  Provide regular financial reports to management and stakeholders.
  
• Budgeting and ForecastingAssist in preparing budgets and financial forecasts.
  Monitor spending against budgets and provide variance analysis.
  
  
• Accounts ReconciliationReconcile bank statements, accounts payable, and accounts receivable.
  Investigate and resolve discrepancies in financial records.
  
• Audit SupportCoordinate and support internal and external audits.
  Provide necessary documentation and data for audit processes.
  

We are looking for some experienced Carpenter for our company with following conditions:

• Must have more than 5 years experience in Floor Tiling
• Must stay in company lodge/dormitory.
• Must willing to work after regular hour
• Management may ask for in person interview
• First 3 month will be consider as probation period

Job responsibilities:

• Assist the WSH Manager to identify and assess risks arising from the workplace.

• Conduct site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations.

• Assist to conduct Safety Committee meetings, organize and promote safety events and campaign, etc.

• Conduct daily toolbox meetings to highlight safety issues.

• Supervise and attend to all issues related to workplace safety, health and environmental control.

• Ensure all documentation / permits / licenses related to work place safety, health and environmental control required by authorities and management are kept in order.

• Assist in conducting periodic WSH cross inspection for all sites to ensure compliance with government safety regulations and industry standards.

• Assist in conducting safety training / briefing such as familiarization on Risk Management’s standardize procedures to the respective site team to ensure safety awareness that the operations are safe and in compliance with statutory regulations and international standards / practices.

• Identify unsafe acts or practice and promptly correct any unsafe condition or practice.

• Any other duties that may be assigned.

Requirements:

• Advance certificate in Workplace Safety & Health/NITEC in Engineering (Environment, Health, Safety) or relevant field.

• Minimum 2 years of relevant working experience

• Familiar with regulatory requirements related to workplace safety and health, and all other aspects of safety

• Possess a high level of the initiative, strong interpersonal and communication skills.

We are looking for some experienced Carpenter for our company with following conditions:

• Must have more than 2 years experience in carpenter works
• Must stay in company lodge/dormitory.
• Must willing to work after regular hour
• Management may ask for in person interview
• First 3 month will be consider as probation period

Able to operate machines to cut tiles and able to work in fast paced environment.

Skilled in laying tiles with good workmanship.

Responsible and Hardworking.

Roles & Responsibilities

Job Description:
We are seeking a proactive Sales & marketing executive to expand our business by building and nurturing relationships with architectural firms and other stakeholders in the construction industry.

Key Responsibilities:

• Develop and maintain strong networks with architectural firms to promote company products and solutions.
• Identify new business opportunities and manage the sales process from lead generation to closing.
• Provide technical advice and tailored solutions to meet client needs.
• Collaborate with internal teams to ensure seamless project delivery.
• Achieve sales targets and drive revenue growth.

Requirements:

• Diploma/Degree in Engineering, Business, or a related field.
• Proven experience in sales within the construction industry, with a strong network in architectural firms.
• Knowledge of construction materials, systems, or solutions.
• Excellent communication, presentation, and relationship-building skills.
• Self-motivated and results-oriented.

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Assists Lead Engineer in developing concept for new project work;
• To develop Civil & Structural framing plans, layouts from concept stage to basic engineering stage to further detailed engineering stage for smaller to larger projects;
• Assists Lead Civil and Structural Lead in developing Civil and structural details, drawings, calculations, specifications for larger projects;
• Works independently in the detailed design, specifications, and calculations;
• Develops Expertise in carrying out design works to comply to local code requirements;
• Ensures that the drawings developed for the project comply to project standards/ company standards;
• Assists Lead Engineer in dealing with shop drawings, vendor print review and comment, if necessary or as advised by the Lead Engineer;
• Assists Lead Engineer working on developing necessary documents as per project requirement and also assist Lead Engineer in analyzing output results;
• Assists Lead Engineer in meeting with client in kick off meeting or other weekly meeting as and when needed;
• Provides guidance to the Assistant Engineer, Engineer in carrying out the design works;
• Visits Client site as and when necessary and as advised by Lead Engineer;
• Assists in technical report writing, compiling and coordinating;
• Assists Project Managers in achieving project completion within budget and on schedule;
• Addresses site issues related to design;
• Supports construction on solving process design issues. Visit site to check and analyses issues;
• Assists Project Managers in achieving project completion within budget on schedule;

Requirements

• Bachelor Degree in Engineering (Civil)
• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for computer aided design team
• Familiar with the Local authorities requirements for civil and structural submissions

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job Description

• Prepare Tender Drawings, Shop Drawings, Construction Drawings, As-Built Drawings, etc.
• Prepare Drawings submission format, including title block, notes and legends, drawing to scale, etc.
• Attend BIM Coordination Meeting
• Support Project Team in managing RFI and making presentation using BIM-Model.
• To monitor, update drawing submission status including compilation and discuss with Project Team.
• All other ad-hoc tasks as assigned by reporting Manager

Job Requirements

• Certificate in Autodesk Autocad and Autodesk Revit MEP Advanced Module
• Diploma/Degree in Mechanical Engineering or equivalent
• At least 3-5 years of working experience in M&E using AutoCAD, Revit and BIM preferably from Construction Industry
• Ability to work independently and target oriented in a stressful environmen

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Responsibilities:

• To provide administrative support and coordination to the project management team in the execution of the customer program.
• Attend customer complain and provide necessaries solution
• Act as primary point of contact for the customer on operational and performance issues.
• Monitor project performance to customer requirements and expectations.
• Issue regular reports on program performance.
• Coordinate work of various functional groups such as Operations, IT, Quality.
• Identify areas of non-conformance and develop remedial plans.
• Resolve customer issues in a timely manner via a customer-defined escalation process and coordination of internal resources.
• Conduct regular meetings with Operations/Business managers to ensure customer needs and timelines are achieved.
• To monitor and follow up with functional departments on the progress of the work, updating the status of project plan and where appropriate to identify the relevant activities and critical items having significant impact on the project deliverables.
• Support administration works of project management team where applicable
• Responsible for the inquiry, order through to delivery
• Able to coordinate between departments on the progress of the work to update and keep track of the project plans
• Orders and delivery dates Management
• Other ad-hoc duties as assigned.
• Working location: Woodlands

Key Responsibilities

• Required to manage and operate (hands-on) systems (server & storage) used in the University. Familiar with Microsoft Windows Server, SQL Databases, Linux, Cohesity Backup System, Office365, Microsoft HyperV, VMware/Netapp storage, Storage Spaces Direct, Hitachi (HCP), McAfee and Azure Cloud Platform. A strong knowledge on Microsoft Active Directory Architecture, PowerShell, Group Policies and Active Directory Federation Service is required.
• Required to provide Systems administration of Active Directory, Multi-Factor Authentication platform such as Okta, Antivirus and others.
• Required to provide Management systems availability statistics and patching reports, IT DR support and IT support for teaching-learning.
• Required to perform Systems hardening, Systems patching, Systems onboarding and decommissioning and other Systems related support services.
• Work with users to identify, understand requirements and develop deployment plans, assist with planning, developing, implementing and managing all system assets deployed in the University.
• Participate in process improvements such as operational efficiency of Systems Operations to provide prompt and effective support to existing systems.
• Rotational on-call duty along with team members and after office hours support.

Requirements

• Degree/Diploma in Computer Science or equivalent with at least 5 years of relevant working experience in design, configuration and management of Windows and Linux Infrastructure.
• Strong technical competencies and analytical mind, with specialized certifications such as MCSE, RHCE, CDCP, CCNA, ITIL, etc. would be preferred.
• Good working knowledge of IT governance, systems, security and system technologies and able to work with cross-functional departments.
• Excellent written, communication and interpersonal skills.
• Other traits include positive attitude, self-motivated, customer service oriented and a team player.

Only shortlisted candidate will be notified.

Role Description

This position is to demonstrate the designer's versatility, creativity and design philosophy. For design concept, conceptual renderings, mood boards, and design plans that illustrate the designer’s thought process and approach to transforming a space. A brief overview of the designer’s expertise, including space planning, material selection, lighting design, furniture sourcing, and project management.

Spectific Responsibilities

1. Meet with clients to discuss their design goals, preferences and budget, provide guidance and advice of design concepts and solutions.

2. Create mood boards, sketches and rendering to visually represent design ideas and present design ideas to clients for approval and refine based on feedback.

3. Choose furniture, fixtures, lighting and materials that complement the design concept.Ensure that all materials chosen fit within the client's budget and asthetuc preferences.

4. Prepare detailed design specifications and plans and create technical drawings that provide precise measurements and dimensions that are clear for contractos and vendors.

5. Works closely with contractors and vendors during the implementation and coordinate the delivery and installation of furniture, fixtures and materials to ensure it meets the design specifications.

Duration of Attachment Offered

• 6 months

Job Position:

Mechanical Engineer

Job Description:
We would like to recruit a Mechanical Engineer to aid our team in the development of a custom 3D printer. The machine would require a complex tool swapping system for custom built extruders. Furthermore, it will require automation mechanisms to increase production volume and efficiency
• Design and develop a 3D printer, including the kinematics, electronics, and thermal components. Generating a BOM of all parts required based on knowledge of 3D printing systems.
• Generate a detailed CAD model that shows the assembly process of the machine, to be provided to suppliers for the purchasing of parts.
• Generate custom G-Code to accommodate for the tool changing
• Generate custom G-Code for the automation mechanisms
• Include safety precautions for the multiple extruders and build plate
• Optimise the design as the project progresses through troubleshooting design flaws during testing, allowing for a more reliable printer.

Required/Preferred Skills:

• CAD Profiency
• Product Design and Design for Manufacturing & Assembly
• Electrical wiring and Electronics
• Problem-Solving
• Testing and Validation
• Project Management
• Familiarity and experience assembling and upgrading FDM systems
• Enthusiasm in building and problem solving

Required/Preferred Qualifications:

Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.

Experiences:

3+ years of experience in mechanical design, preferably with building customised 3d printer experience and related AM skills