Responsibilities:

• Coordinate design and drawings with consultant
• Monitor and report on the progress of shop drawing production
• Work closely with Architectural and M&E teams, resolve issues on drawings
• Responsible in technical submissions for materials, construction methods, and C&S shop drawing

Requirements:

• Bachelor's Degree in Civil/Structural Engineering
• Minimum 2 - 3 years of working experience in construction industry
• Relevant design experience with contractor will be an advantageous
• Demonstrates independence with excellent analytical and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Descriptions:

1. Participate in high-level product specifications, microarchitecture and implementation of high-speed memory interfaces

2. Responsible for delivery of AMS circuits in SerDes, including the evaluation of different circuit topologies

3. Worked on high-speed serial and parallel interface design, defining specifications and implementing modules such as bandgap, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalization techniques and circuits such as de emphasis, CTLE, DFE, CDR architecture and implementation, high-speed digital circuits (serializers, deserializers, counters, dividers, etc.)

4. Work with the verification team for lab debugging

5. Work with the software team and/or customers to solve problems, debug and tune system performance

Job Requirements:

1. Bachelor's degree in communications, electronic engineering or computer engineering, master’s degree preferred

2. More than 4 years (senior engineer) and 6 years (staff engineer) of ASIC design experience, familiar with ASIC development process

3. Good AMS circuit design skills and EDA tools such as Cadence Virtuoso, Calibre, Hspice/Spectre, and static timing analysis tools (e.g., Nanotime)

4. Familiarity with high-speed interfaces such as DDR, SerDes, PCIe is preferred

5. Ability to solve customer problems and deliver results in a timely manner

6. Strong organizational and communication skills where English is a must and Chinese is preferred

HOW TO APPLY:

Interested applicants, kindly send your resume to [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Mason & Co is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Mason & Co Pte Ltd

EA License No: 19C9622

EA Personnel: Cheah Wei Xuan (Thea)

EA Personnel Reg No: R23118878

Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

(A) Essential Job Functions:

The Design Engineer (C&S) is responsible, but not limited to, the following:

• Coordination of civil/structural works for construction.
• To attend meetings with client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

• Machine design in Mechanical aspect
• Perform mechanical part detailing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Co-ordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Solidwork 3D software to do mechanical design
• Good knowledge and experience in machine automation
• Degree / Diploma in Mechanical Engineering

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Join Our Team as an Art and ArtScience Instructor at Supergenius Preschool!

Are you passionate about art and science education for young children? Do you have experience teaching art and exploring the intersection of art and science? If so, we have an exciting opportunity for you to join our team as an Art and ArtScience Instructor at Supergenius Preschool.

Job Description

Art and ArtScience Instructor

As an Art and ArtScience Instructor, you will play a pivotal role in fostering creativity, critical thinking, and interdisciplinary learning in babies, toddlers, and preschoolers. Your expertise in art and science will inspire children to explore the connections between these two fields and nurture their curiosity. Here are the key responsibilities associated with the role:

Roles and Responsibilities

• Plan and deliver engaging art and art science lessons that encourage children's creativity, curiosity, and critical thinking.
• Introduce children to various art techniques, materials, and styles, fostering their self-expression and artistic development.
• Explore the intersection of art and science, incorporating scientific principles, experiments, and concepts into art activities.
• Teach children about the natural world, encouraging them to observe, document, and create art inspired by nature.
• Facilitate hands-on art and science experiments, encouraging children to make observations, predictions, and draw conclusions.
• Encourage children to explore different art mediums, such as paints, clay, recycled materials, and natural resources, in their artwork.
• Foster a safe and inclusive learning environment that promotes collaboration, experimentation, and problem-solving.
• Adapt teaching techniques to cater to the developmental needs and abilities of each age group, ensuring an age-appropriate curriculum.
• Collaborate with other teachers to integrate art and art science lessons into the preschool curriculum, promoting interdisciplinary learning experiences.
• Communicate regularly with parents, sharing children's progress, achievements, and areas for further development in art and art science education.
• Maintain a safe and organized art studio, ensuring all art supplies and materials are well-stocked and properly maintained.

Job Requirements

To excel in this role, we are seeking candidates with the following qualifications and attributes:

• Artistic Proficiency: Possess strong artistic skills and a deep understanding of various art techniques, materials, and styles suitable for young children.
• Knowledge of Art Science: Familiarity with the connection between art and science and the ability to incorporate scientific concepts into art lessons.
• Experience with Young Children: Previous experience teaching art and art science to babies, toddlers, and preschoolers, preferably in an educational or early childhood setting.
• Passion for Art and Science: Display a genuine passion for art and science education, fostering children's creativity, curiosity, and critical thinking.
• Communication and Interpersonal Skills: Effective communication skills to engage with young children, parents, and colleagues in a positive and supportive manner.
• Adaptability and Flexibility: Exhibit adaptability and flexibility in lesson planning, accommodating the individual needs and interests of each child.
• Patience and Empathy: Possess patience, empathy, and a nurturing attitude towards children's artistic and scientific development, fostering a safe and inclusive learning environment.
• Team Player: Collaborate effectively with other teachers and staff members to promote interdisciplinary learning experiences and a cohesive preschool community.

Working Hours

• The working hours for this position are Monday to Friday, from 9:00 am to 6:00 pm and/or Weekends 9:00am to 6:00pm ( optional )

Join Us

• If you are passionate about art and science education, fostering creativity and critical thinking in young children, and exploring the connections between art and science, we invite you to apply for the position of Art and ArtScience Instructor at Supergenius Preschool.
• To apply, please reach out via WhatsApp at +65 6962 4455 or email your application to [ [email protected] ].

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

• Prepare work schedule.
• Prepare P/O or W/O for suppliers and tradesmen.
• Liaise with clients, suppliers and tradesmens for delivery and commencement of work.
• Monitor site progress and inform sales personnel and clients accordingly.
• Ensure quality of work is done according to design provided by sales personnel.
• To co-ordinate touch-up or rectification works, if any.
• To ensure project is completed on time according to work schedule.
• Ensure proper housekeeping on site.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park - Nearest MRT: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Print Art Director
Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Raeburn Park, Singapore (Nearest MRT: Outram Park / Harbourfront)

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Café Barista cum Server (Latte Arts)

Working days & hours: 6 days, 10hrs

Location: Clarke quay

Salary: $2800 - $3000

Responsibilities:

• Prepare coffee drinks, teas, and other beverages to customer specifications

• Operate and maintain all coffee-making equipment and tools

• Maintaining cleanliness of work area and equipment

• Interact with customers in a friendly and professional manner

• Follow all safety and sanitation procedures

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Café Barista cum Server (Latte Arts)

Working days & hours: 6 days, 10hrs

Location: Clarke quay

Salary: $2800 - $3000

Responsibilities:

• Prepare coffee drinks, teas, and other beverages to customer specifications
• Operate and maintain all coffee-making equipment and tools
• Maintaining cleanliness of work area and equipment
• Interact with customers in a friendly and professional manner
• Follow all safety and sanitation procedures

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Café Barista cum Server (Latte Arts)

• Working days & hours: 6 days, 10hrs
• Location: Clarke quay
• Salary: $2800 - $3000

Responsibilities:

• Prepare coffee drinks, teas, and other beverages to customer specifications

• Operate and maintain all coffee-making equipment and tools

• Maintaining cleanliness of work area and equipment

• Interact with customers in a friendly and professional manner

• Follow all safety and sanitation procedures

☎️ Whatsapp +6588278652 (Hym)

Highlights

• Comm + AWS + Quarterly Bonus
• Retail hours
• Art piece/ Highend/ Luxury

Responsibilities:

• Ensure high levels of customer satisfaction through excellent sales service.
• Maintain outstanding store condition and visual merchandising standards.
• Ensures the stock model, according to the guidelines set by the Company and carry out inventories according to the established periodicity.
• Collaborate into achieving the sales target.
• Good housekeeping of stores.
• Monthly stock take

Requirements:

• “O” level
• Min 2 years in retail industries

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

Highlights

• Comm + AWS + Quarterly Bonus
• Retail hours
• Art piece/ Highend/ Luxury

Responsibilities:

• Ensure high levels of customer satisfaction through excellent sales service.
• Maintain outstanding store condition and visual merchandising standards.
• Ensures the stock model, according to the guidelines set by the Company and carry out inventories according to the established periodicity.
• Collaborate into achieving the sales target.
• Good housekeeping of stores.
• Monthly stock take

Requirements:

• “O” level
• Min 2 years in retail industries

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Sim Jia Hui (Jacinda)
EA Personnel Reg No: R22106242