Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

XCL World Academy is seeking to appoint a Secondary Years Design & Technology Teacher. This is a full-time contract position commencing from 1st August 2025.

Preference will be given to teachers who have relevant subject-specific IB MYP and DP experience, as well as a clear track record of superior teaching in international school settings.

Main Responsibilities

• Teachers should be willing to contribute positively to the collaborative culture of the department and broader SY Team.
• Demonstrates to professional ethics, international mindedness and the school’s mission.
• Adheres cooperatively to XCL policies and regulations, including duties, deadlines, programme requirements (IB).
• Seeks clarification in case of lack of clarity to fully meet all expectations of the role and sets and maintains high standards of professionalism.
• Contributes to the development of curriculum and assessment documentations.
• Show exemplary attendance to work eg. recognizes the importance and provides support for XCL extended school day activities.

Person Specifications

• Undergraduate degree from a recognized university or college.
• Teaching experience and professional certification specific to applied position.
• Minimum of two years’ experience as a class teacher, preferably in an international K-12 school.
• Preferred minimum 2 years of relevant IB programme experience.
• Possess skills and attitudes aligned to the purpose, mission and vision of XCL World Academy.
• Need clear eagerness, resilience and understanding to engage and collaborate in the development of a highly aspirational school.
• Have demonstrated commitment and education and learning beyond the classroom.
• Be flexible and willing to take on new challenges.
• Salary commensurate with experience (International School) and according to the school's teaching scale.
• This is a full time 2-year contract position, renewal will be offered based on performances and class allocations.

Application:

Qualified candidates are welcome to apply by 4 January 2025.

About us

XCL World Academy is an international school in Singapore for students aged 2 to 18, fully committed to the academic, emotional and social development of its students. We are immensely proud to be the first and only international school in Singapore authorized to offer all four International Baccalaureate (IB) programmes.

We aspire to recruit employees that share and understand our commitment to empowering an international community of happy learners who aspire to positively impact others. We are committed to safeguarding and promoting the welfare of children and young people. All appointments are subject to Safer Recruitment processes such as interviews, employment reference checks, identity and criminal record checks.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Develop innovative design solutions and solve engineering problems.
• Deliver parts to production on time, cost and to specification
• Produce functional prototype products suitable for testing, review and demonstration
• Develop detailed specifications and design requirements
• Develop tests to replicate anticipated usage and optimise products to be robust and high performing
• Perform analysis on test failures and develop efficient solutions

About you

• A degree in Mechanical Engineering discipline or equivalent with relevant professional experience
• A creative and considered approach to problem solving, following clear design processes
• 2 + years of industry experience
• Practical and methodical design development expertise through prototyping and testing
• Knowledge and understanding of a broad range of engineering and technological disciplines
• Proven examples of developing a technically challenging design
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team
• Ability to plan, prioritise and co-ordinate your own time
• Knowledge and understanding of multiple manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

• Design and shop drawing preparation & submission of automatic fire sprinkler systems.
• Prepare shop drawings from contractual drawing issued by main contractors’ assigned projects.
• Prepare preliminary schemes, penetration drawings as needed.
• Be able to produce pipe schedule hydraulics of his assigned project.
• Have understanding of equipment used in connection with each project.
• Prepare reports to Design Manager of deviations from original Tender drawings.
• Provide clear path of communication & coordination between his counterparts and superiors.
• Any other duties that may be assigned by the company.

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620

Sales Interior Designer (Junior/Senior)

Working Day: 5 Day (4weekday + 1weekend)

Working Location: IMM Building (Required Site Visit)

Salary:

1. Junior (Basic $1200 + 35% Project Profit)
2. Senior (Full Commission Role, 65% of Project Profit)

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

#SCR-angel-liew

Job Specification/Requirements

• At least 1 year experience in Sales Role
• Possess flair and creativity in interior design
• Candidates with more than 5 years of relevant experience will be considered for the Senior position
• Possessed Diploma in Interior Design or related & equivalent is preferred (Training will be provided)

Job Description

• Prepare Design Proposal &/OR Presentation for space planning and design conceptualization from client’s requirements
• Generating Quotation from client’s requirements
• To communicate & provide explanation confidently for any design/renovation process upon client’s query before project confirmation
• Manage Client’s expectation before and during the project duration
• Converting prospective clients to actual sales
• Managing projects to meet project objective and client’s needs
• In charge of the Project management as well as Site supervision of individual’s project
• Sales & Customer orientated services

Account Executive

(Interior Design Industry)

• Nearest MRT : Redhill
• Working days: 5 days
• Mon to Fri 9/10am to 5pm (can WFH 1-2 days per week)
• Salary: S$ 2,500 to 3,000

Requirements

• Diploma in Accounting, Finance, or a related field.
• 2 years of full-set accounting experience.
• Proficiency in accounting software (e.g., QuickBooks).
• We are a start-up interior design firm looking for detailed-oriented and organized accounts executive to join our company.
• We allow hybrid working arrangements and has a collaborative working environment.

Job Description:

• Handle full sets of accounts including invoicing, receipt updates, vendor invoice processing, payment arrangements, journal entries, maintenance, bank reconciliation, balance sheet schedules, fixed assets registers, and general ledger
• Manage day-to-day financial operations and monitor cashflow
• Prepare and review gst submission and tax returns
• Preparation of financial statements and assist in other related statutory filings required
• Manage end to end payroll process, including preparation, calculation and disbursement of monthly salary/commission
• Ensure compliance with all statutory requirements such as CPF, income tax and other relevant payroll tax obligations
• Support general administrative task

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Need 10 years of experience in the field, with at least 50,000 followers accross all social platforms. Team player, able to teach different students with different learning styles. We are a great team with a cohesive spirit, 6 months trial period will be implemented to see if you fit the team. Thank you for looking

Duration: Daily from 11 January to 19 January

Working Hours: 11:00 AM to 5:30 PM (6.5 hours/day)

Responsibilities:

• Supervise the gallery during operating hours.
• Ensure the safety and security of artwork on display.
• Assist visitors with any queries about the exhibits.

Requirements: To be properly attired (Smart Casual)

Location: 1 Straits Blvd, Singapore 018906

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Deliver sub-assemblies to production on time, cost and to specification.
• Develop detailed specifications and design requirements for interdependent systems
• Identify and design test requirements to replicate anticipated usage and optimise products to be robust and high performing.
• Build functional prototype products suitable for testing, review and demonstration
• Perform and review analysis on test failures and develop efficient solutions
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

• A degree in a relevant Engineering or Science discipline or equivalent
• 4+ Years of experience in a relevant role, working on complex and challenging technical problems
• A creative and considered approach to problem solving, following clear design processes
• A practical and methodical approach to design using an iterative development cycle of prototyping and testing
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team and across a business
• A demonstrable desire to constantly improve yourself including evidence of self-development
• Knowledge and understanding of a broad range of manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

JOB DESCRIPTION

· Work on SoC architecture discussion and optimization with architect; SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Work on SoC floorplan with architect and APR; SoC power check; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Senior Design Engineer
5 days
9am-6pm
Kallang
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Senior/Process Design Engineer (Wastewater Treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

Job Scope:

You will assist the Transformation team in the following areas:

· Design internal comms content, e.g. EDMs, articles, infographics, bite-sized videos, etc.

· Publish and maintain the repository of the internal comms content

· Provide administrative and logistics support for staff well-being initiatives and staff engagement activities

· Perform tasks associated with the planning and execution of events

Requirements:

• Diploma holder and above
• Good communication and interpersonal skills
• Ability to work effectively as an individual and in a team
• Proficient in Microsoft Office applications e.g. PowerPoint and Word
• Proficient in graphic design, video editing software and have good knowledge of social media/design/communications trends
• Experience in video filming and event photography will be an added advantage

Salary: $11 to $18/hour

Location: Maxwell Road

Contract Period: 6 months

Working Hours:

Mon to Thurs: 8.30 am to 6pm

Fri: 8.30am to 5.30pm

EA License No: 96C4864

Reg. No.: R24121728