Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Acting role:

The Technical Controller appointed must possess a civil or structural engineering degree from a recognised institution and have the right qualifications and experience.

Resident Engineers must meet the acceptable qualifications set by BCA.

(Must be qualified by BCA)

Project Manager (Main jobscope)

• Familiar with all the documents submission to relevant government authorities
• Liaise with consultants and/ or sub-contractors engaged on the project
• Attend regular meeetings with client/ owner/ contractors/ sub-contractors and ensure the progress is on schedule
• Identify and comply with all applicable statuary/ regulatory requirements related to project
• Communication to external parties including client, subcontractors, consultants, vendors, etc on project needs, requirements and schedule by means of daily construction oversight
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Monitor and manage day-to-day operations of projects, including developing and coordinating activities with other sub-contractors
• Able to read submission plan.

Job Requirement:

• Candidate must possess at least Bachelor's Degree in Engineering (Civil) recognised by PE Board or equivalent
• At least 8 years of working experience in the related field is required for this position

- Plan, coordinate and execute projects in interior fit out works (Commercial - Shopping Centre)

- Must have experience in handling F&B projects in the past.
- Good experience in project management and scheduling
- Ability to understand drawing

- Basic knowledge in M&E works will be an advantageous

- Certificate/ diploma in any of the following relevant field such as Architecture, interior design, project management

Archangel Digital Studios is a dynamic and innovative digital marketing agency based in Singapore. With a passion for excellence and a focus on creativity, we aim to redefine the standards in the industry.

As a Social Media Design Intern working with the marketing team, you will be required to create visuals and assets for advertising, emailers, social media, flyers, banners and more, as well as bring fresh and creative ideas to the table.

The place of work will be from home.

Responsibilities:

• Graphic design
• Create creative content for marketing collaterals such as flyers & emailers
• Design posts for social media & advertising
• Keep up to date with industry changes and the latest in social media design

Requirements:

• Diploma, degree or experience in design
• A keen eye for aesthetics
• Highly motivated and proactive
• Able to turn around designs quickly
• Able to work independently, methodically and meet deadlines
• Experience with Web Development platforms WIX, WordPress & Shopify advantageous but not required

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Sim Jia Hui (Jacinda)

EA Personnel Reg No: R22106242

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

• $3500 - $4200 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Project Executive | Up to $3k | 5 Days | Kallang

• Working Hours: Monday-Friday [9am - 6pm]
• Location: Kallang Jct
• Salary: $2,500 - $3,000 + Performance Bonus

Requirements:

• Diploma in any industry

Jobs Scope:

• Prepare plan drawing and 3D drawing using AutoCAD
• To do colour scheme confirmation
• To tick off quantity of layouts
• Placing order for projects
• Prepare handover material/checklist for handover
• Prepare Master programme and ensure work progresses in accordance with schedule
• Coordinate all aspects of the project works with client, consultants and subcontractors
• Inspect work in progress on site to ensure quality is in compliance with drawing
• Attend site and coordination meeting
• Ad-hoc administrative tasks

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Print Art Director

Working days & hours: 5 days, Monday - Friday
Salary: SGD 3,500 - SGD 5,000
Location: Outram Park / Harbourfront

Responsibilities:

• Lead the print team and oversee development of work for consumer/corporate client campaigns and projects
• Conceptualising and proposing innovative print ideas (ATL/BTL)
• Oversee the day-to-day work of the design team and provide art direction guidance
• Experience work on several projects simultaneously

Requirements:

• Bachelor of Arts in Graphic Design, Fine Arts or equivalent from an accredited art/design school or university
• Min. of 3 years professional experience as an Art Director in print and design creative
• Proficient in all the Graphic Design software – Photoshop, Illustrator, InDesign, Freehand is preferably.
• Sound knowledge in print production process preferred

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• $3500 - $4200 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• $3500 - $4200 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Participating in new LTA project [Viaduct and Station]
• Having experience in LTA project [Viaduct and Station] is mandatory.
• Permanent role/ 5 workdays
• Applicants waiting for year end bonus [Year 2024] are welcome to apply.
• MNCs & leading A1 main contractor

Job Description:

• Responsible for all permanent and temporary works design and leading design team.
• Participate in new LTA project [Viaduct and Station]
• Responsible for handling client and consultant, coordinate with consultants, client, and authorities for design matters and submission.
• Oversee the shop drawings submissions and issuance, planning and control delivery of design schedule, monitoring the progress.
• Internal coordination with construction and other departmental teams for their requirements, provisions.
• Resolve all technical queries and submit/raise (RFA/I) to concern parties to clarify on design details

Requirements:
• Degree in Civil Engineering and/or relevant field
• experience in LTA project [Viaduct and Station] is mandatory.
To apply, please include the following details inside your resume:
• Reasons for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date
How to apply
Interested candidates who wish to apply for the position, you may send in your updated resume to [email protected]
We regret that only short-listed candidates will be contacted shortly.
Lionel Cheow

EA License | 14C7092
EA Registration Number | R1105005

Summary:

• Specialise in commercial outfitting, interior design consultancy
• Basic salary up to $3800
• Variable bonus + Performance bonus
• $800 wellness package per annum
• Location: Potong Pasir
• 5 days work week @ 9am - 6pm

Key Responsibilities:

• To prepare tender bids for submission
• Documenting any changes in design and updating budgets
• Review and understand all drawings and specifications
• Monitor project costs to ensure objectives of the project are achieved in accordance with company standards and building contract law
• Responsible for coordination with contractors, suppliers, and other parties
• Handle pre or post-tender procurement which includes sourcing and negotiating with suppliers
• Tabulate and evaluate price comparison and prepare cost analysis / cost reduction strategies
• Handle project administration and documentation
• Other related duties assigned by the manager

Requirements:

• Min 1 year experience in ID field
• Experience in full interior fit-out projects
• Familiar with the entire bidding process

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Project Executive (Interior Design)

Salary: $2,500 - $3,000 + Performance Bonus

Working Hours: Monday - Friday (9am - 6pm)

Working Location: Kallang

Jobs Scope:

• Prepare plan drawing and 3D drawing using AutoCAD
• To do colour scheme confirmation
• To tick off quantity of layouts
• Placing order for projects
• Prepare handover material/checklist for handover
• Prepare Master programme and ensure work progresses in accordance with schedule
• Coordinate all aspects of the project works with client, consultants and subcontractors
• Inspect work in progress on site to ensure quality is in compliance with drawing
• Attend site and coordination meeting
• Ad-hoc administrative tasks

Requirements:

• Diploma in any industry

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279