Main contractor for LTA project seeking for the above position:-

5.5days work day per week

Junior Engineer (Design Dept).

• Prefer with experience in LTA MRT project
• Responsible and ownership attitude
• Like to work as a team
• Skill in autocad, Microstation will be advantage

Scope Of work:

• Coordination work with design consultant, contractors, clients & authorities
• In charge of planning (Road & Drainage diversion)
• Preparation of method statement and documents submission
• Establish & Maintenance of QA/QC procedure
• Supervison of contractor's / vendor's quality related site work
• Address site issue related to design.
• Manages timely submission & approvals from local authorities
• Manage & produce detailed design inclusive of calculations & drawings production in compliance with Eurocode/ BS code , ACI & ASCE for authority submission.

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

You are a highly talented individual looking for a challenge. We are a dynamic strategic business and brand consulting team looking for a Design & Project Associate to join our team and help drive the success of our clients’ businesses.

FT Consulting offers a dynamic work environment that fosters creativity and professional growth. As a Design & Project Associate, you’ll play a pivotal role in shaping impactful branding and business consultancy projects, contributing to the success of both our company and our clients.

Responsibilities:

● Assist in preparing and presenting consulting proposals and presentation materials.

● Receive and interpret design briefs from the Company and/or its clients.

● Execute creative and effective design solutions that align with project objectives and timelines.

● Participate in consultancy assignments and activation campaigns.

● Collaborate with team members to deliver high-quality consultancy solutions.

● Ensure flexibility and adaptability in handling ad hoc projects and tasks.

Requirements:

● High performing fresh graduates or candidates with no more than 2 years of design experience will be considered.

● Minimum Diploma in Visual Communication, Graphic Design or similar.

● Proficient in Adobe Creative Suite. Ability to use video editing tool(s) is a plus.

● Strong organisational and time management skills, able to deliver high quality work under demanding deadlines and manage clients independently with minimal supervision.

● Curious, creative, willingness to learn, digitally savvy, team-player and detail oriented.

● Good command of written and spoken English.

If you aspire to take on a role where you can holistically understand and implement end-to-end solutions for clients—bringing creation to life—and showcase your creative flair not only through visual designs but also through innovative ideas and strategies for clients across various industries, we would love to hear from you.

Email your resume and portfolio (PDF 3MB maximum or web URL), indicating your current and expected salaries to: [email protected]

We regret that only shortlisted applicants will be notified.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Visit www.ppsjob.com.sg

Have years of experience in similar role (Interior, construction, civil)
Liaise with consultants and construction team, including Project Director/Managers, Engineers etc. for cost related issues
Prepare Bill of Quantities (BOQ) in accordance to specifications and drawings for calling of quotation
Sourcing of sub-contractors for related scope of works
Carry out cost comparison and shortlisting sub-contractors for the award of sub-contracts, including negotiation of quotation before finalizing the cost comparison & recommendation
Prepare and issue sub-contract documents/works order for approved sub-contracts' works
Monthly progress claim assessment and payment of sub-contractors in fair manner, and to ensure works carried out in compliance to contracts and specifications.
Prepare and claim variations to consultant
Site visits to understand the progress of construction and works involved
Working as a team member with colleagues to support each other on past to current work experienc

**Take note: This role is fully commission-based and the salary indicated is an estimate of what most Interior Designers in our company achieve monthly.

Requirements:

• Passionate about interior design.
• Self-motivated and driven to achieve sales targets.
• Background in interior design is advantageous.
• Ability to meet client requirements.

Responsibilities:

• Handle sales inquiries effectively.
• Provide expert advice on space planning and interior aesthetics.
• Create mood board proposals to communicate design concepts.
• Develop design briefs and schedules in collaboration with the team.
• Assist the Team Lead in preparing quotations (Training will be provided).
• Collaborate with the Visualization team to produce 3D design drawings.
• Engage in discussions with clients regarding design proposals.
• Manage and coordinate with subcontractors throughout project implementation.
• Conduct on-site inspections to ensure high-quality workmanship.

Benefits:

• Competitive full commission structure.
• Company-provided leads and marketing support.
• Comprehensive training on product/material knowledge and sales tactics.
• Yearly bonuses for achieving sales targets.
• Flexible working hours.
• Opportunities for career advancement based on performance.
• Potential to lead a team with overriding commissions.

Job summary

Join us as an Interior Design Sales Consultant, turning passion into earnings. Hope to welcome you to our family!

Key selling points

• Competitive full commission with yearly bonuses for achieving sales targets
• Strong support & guidance from company
• Opportunities for career advancement based on performance

Design Assistant/Executive

Your primary roles are to create 3D models for RISIS products (jewellery, lifestyle, and sculpture), to operate our Rapid Prototyping (RP) Machine, to do 3D scanning of RISIS products and to do any modifications on the 3D scanned models. You are required to work closely with the Designers (Sculpting, Jewellery & Lifestyle) to generate high quality 3D-printed models for visualization or production purposes. You must analyse, evaluate, and repair CAD models suitable for Additive Manufacturing. In addition, you may be tasked to design and model corporate gifts products to enhance your knowledge and skills so that you have a better understanding of the whole process from conceptualizing, developing, and producing premium gifts.

Key Responsibilities:

• To create 3D models based on 2D drawings.
• To be able to visualize, create and repair CAD files/data (.STL, .OBJ, .3DM).
• To generate 3D models as per specifications given, either by scanning or by using company-provided 3D modelling software within the required deadline.
• To generate 2D image renders for visualization based on 3D models.
• To operate and conduct regular maintenance of our Rapid Prototyping Machine.
• To liaise with suppliers on the purchasing of all necessary materials used for producing CAD models and other relevant 3D matters.
• To keep proper stock records, manage the sufficient supply and usage of all 3D related consumables.
• To keep a monthly maintenance logbook for the Rapid Prototyping Machine.
• To perform post-processes and provide high QC for 3D printed jobs.
• To maintain, update, and follow through 3D printing SOP to achieve the most optimal output and for the success of the 3D printing results.
• To perform preventive maintenance on the Rapid Prototyping Machine as and when needed to keep the machine always in ‘tip-top’ condition.

Other Responsibilities

• To support relevant sales department to do visuals for corporate project proposal.
• To co-ordinate and perform any tasks assigned by the Design Manager.
• To assist Designers with Design Order Form to relevant factories or suppliers when necessary

Requirements

• Diploma / degree in Fine Arts or related discipline.
• Preferably with 1–2 years of experience in similar capacity.
• Working knowledge of 3D design software packages.
• Ability to work well in a team.
• Meticulous and able to meet tight deadlines

The ideal candidate will be responsible for all technical and engineering aspects of their assigned projects. They plan, schedule, predict, and manage all the technical tasks of their assigned project to assure accuracy, proper resources, and quality from start to finish.

Responsibilities

• Responsible for all technical and engineering aspects of their assigned projects
• Responsible to finish all tasks given by manager or top management on time
• Establish or design testing methods to monitor the overall quality of the project
• Collect and analyse project information to create status reports and recommend future actions
• Complete assigned project on time in full and coordinate with related department link to the project.

Qualifications

• Bachelor's degree or Diploma in Mechanical Engineering or equivalent experience
• Strong experience in AutoCAD, 3D Drawing (Autodesk Inventor, Solid Work, Pro E, similar)

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of buildings and other physical infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architecture
• Minimum 10 years of relevant experience in LTA project or Building project

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsible for planning and monitoring schedule for all projects.

Work closely with drafters and peform quality check of all drawings before production on site.

Prepare precast profile drawing to comply the authorities requirment and standards.

Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site

Requires hands on design with detailed experience in 3-D environment, Experience in structural detailing seamless from 3-D mathematical design analysis to 3-D reinforcement detailing with the aid of Telka TSD and TS models etc.

Keen in 3-D modelling designs by using Tekla software.

Looking for Interior Designer Assistant:

- Relevant Interior Design Degree (Diploma in ID)

- Min 1 years experience (fresh graduate can apply)

- To work in Institutional and Workplace projects

- Design Flare, strong in design presentation (visual & communication) and technical knowledge in building services

Specific Responsibility, Accountability & Authority:

1. Responsible to the Project Director/Associate and will liaise with the Architect, senior ID and 3D Department, for projects where the Architect of the building is AWP. For purely ID fit-out works commissioned independently, Interior Design Assistant is responsible to the ID Associate/Senior ID and will liaise with the senior project executive and 3D department.

2. Assist in the day-to-day executive work including design presentations, project management, contract administration and project correspondences

3. Reports to ID Director on all design and technical matters.

4. Assist in conceptual & detail Design Development.

5. CAD or manual drafting of sketch and detailed construction drawings to comply with the various relevant authorities’ requirements. Track the application for planning and building approvals with government authorities by consultants.

6. Liaising with vendors/suppliers’ representatives for ID materials, finishes, FF&E specifications.

7. Evaluate and comment on the contractor’s construction programme and resource planning and establish the expenditure control system and the limits of authority to order variations to contracts.

8. Providing all necessary information and issuing directions and instructions to the project manager and the building contractor to enable the building contractor to proceed with the works.

9. Perform the following tasks as required by the project:-

· Liaison with clients and consultants

· Site inspection

· Attend consultants / site meetings

· Assist in the architectural/ID co-ordination, organisation & preparation of construction documents and drawings.

· Preparation of the following:-

- Minutes of meeting

- Material specifications and schedule of finishes

- FF&E cut sheets

- Material sample board

- Images and Perspectives (with the assistance of 3D department

· Liaison with suppliers & contractors.

For Senior Interior Design position, the above responsibility applies. In addition:

10. Plan the deliverables and the resource allocation for each stages of the project.

11. Assist in the maintenance and improvement of the ID system standardization.

• Graphic Designer
• Mon-Fri
• 9am-6pm
• Basic Salary: $2,200 - $2,600
• Office at Kaki Bukit, Singapore
• Printing Industry

Job Duties

• Able to handle both Windows and Mac System
• Create template, layout and designs for all items in the company
• Work closely with the team members and oversee that quality work and ensure timely completion of task within the deadline
• Any ad-hoc duties to be assign

Job Requirements

• Familiar with Adobe Photoshop and Illustrator / InDesign
• 1-2 years working experience in Printing industry preferred
• Knowledge in pre-press preparation and digital printing is an advantage
• knowledge of color separation will be an added advantage

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

With INNISFREE,
step beyond the simple outer charm
and discover every beautiful moment of yourself.

This is an opportunity for you to be part of the Number 1 Beauty Company in Korea for the Singapore market!

At Amorepacific, we exist to inspire and celebrate Asian beauty through our unparalleled blend of traditional Asian wisdom, pristine ingredients, and technological innovation to a customer base that spans the globe.

This role will support, design, and execute eDM and visual merchandising (VM) requirements for all stores in Singapore. It involves collaborating with the TM, Sales, and Marketing teams to ensure timely eDM design and launch, while identifying and addressing any issues that may arise against brand guidelines and standards.

Job Responsibilities:

• Work closely with the TM team on VM launch schedules & eDM
• Develop strategic eDM Design to effectively showcase promotions.
• Propose and recommend eye-catching product displays at retail stores to highlight the product's strength and promote the image of the brand through posters, shelf strips, wobblers and others and execution in-stores
• Manage external suppliers & vendors to ensure setup is done according to brand guidelines
• Monitoring competitors’ activities in the perspective of VM.

Job Requirement:

• Possess/Obtaining Diploma in Design or equivalent.
• Proficiency in design and editing software such as Adobe Photoshop, Adobe Illustrator and other relevant design and/or editing programs
• A can-do attitude with a tenacious spirit
• Resourceful, Creative and Detailed-oriented.
• Passion in beauty industry

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor’s degree in mechanical / industrial engineering with 2-3 years of relevant experience
• Good exposure in Plastic Injection molding parts design
• Knowledge of product design, engineering plastics behaviour, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

1. Curate suitable social media content to optimize outreach and engagement on relevant platforms.
2. Drive our content marketing strategy across all touchpoints, including website, social media, and email, to enhance engagement and conversions.
3. Create compelling visuals that align with our brand, enhancing both digital and offline presence, improve our content marketing strategy across social channels, focusing on content creation and publishing.
4. Create visual assets to support marketing and branding campaigns.
5. Assist in developing scalable design solutions and templates.
6. Maintain brand standards and guidelines.
7. Actively contribute to the design process and creative production.