Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Responsibilities:

• Create specifications and define software architecture for embedded systems.
• Design and develop MCU based firmware for embedded system.
• Design and develop middleware, application and GUI in Windows, embedded Linux or other environments.
• Work closely with other engineers to analyze and resolve bugs.
• Analyze performance bottleneck and optimize product quality and throughput.

Job Requirements:

• Master or degree in computer science, computer engineering or electronic engineering, or equivalent
• At least 5 years direct relevant experience for the senior engineer position.
• Fresh graduates with relevant knowledge or experience are welcome.
• Experience in MCU firmware or embedded Linux development.
• Firmware development experience with STM32 family is a plus.
• Good understanding in hardware and ability to develop low level codes.
• Strong programming experience in C/C++. Rich experience on embedded software development is a plus.
• Good knowledge in software debugging and performance optimization.
• Good experience in embedded systems based on ARM Cortex-M or Cortex-A series processors.
• Familiar with ISO13485 or IEC 62304 design process, source version control and bug tracking system is an advantage.
• Independent and resourceful.

Roles & Responsibilities:

• Responsible to create concept designs for sales proposal and as well as detail design for confirmed projects.
• Ability in selecting the right components, design of fabrication items as well as working with vendors/sub-con for assigned projects.
• Responsible for planning and executing strategies for completing projects on time and also managing the projects’ budget.
• Exhibit a level of creativity and ingenuity, as well as problem solving skills, to provide reliable, cost-effective solutions to design issues and attend to customers’ enquiries.
• Working with respective project engineer and assembly team on project schedule management, budget management, as well as customer’s review/discussion.

Job Requirements:

• Minimum of 3 years relevant experience in related process manufacturing
• Degree in Mechanical Engineering
• Working knowledge of high-level communication protocols and troubleshooting skill
• Good analytical and planning skills
• Able to work under very tight project timeline
• Independent and good team player
• Willingness to travel overseas, as required

Purpose of the Role:

The Design & General Manager at ALBD Living, Singapore, will be pivotal in driving the company’s vision to become the leading boutique full-service Interior Design, Marketing, and Branding Studio. This role combines strategic leadership with hands-on management to ensure operational excellence, financial growth, and the delivery of exceptional design solutions. By fostering innovation, building strong client and supplier relationships, and cultivating a high-performing team, the Design & General Manager will position ALBD Living as a thought leader and a trusted partner in the industry.

Key Responsibilities

1. Operational Leadership:

· Oversee all aspects of the Singapore office, including design, client service, and project execution.

· Manage performance targets, KPIs, and budgets to achieve financial and strategic goals.

· Ensure operational efficiency, optimize processes, and maintain compliance with regulations.

2. Financial Management:

· Achieve EBITA targets (20%) by improving operating ratios, pricing strategies, and supplier relationships.

· Drive financial growth with a minimum benchmark of SGD $3M in revenue within 12 months.

3. Organic Revenue Growth:

· Focus on expanding the Singapore/Australia client base through new acquisitions and enhancing relationships with existing clients.

4. Leadership and Team Development:

· Recruit, train, and lead a high-performing team in a collaborative and scalable work environment.

· Conduct workshops and training sessions to develop skills and prepare the team for future growth.

5. Design Excellence:

· Champion innovative and high-quality design solutions aligned with ALBD Living’s brand vision.

· Ensure projects meet exceptional standards for creativity, functionality, timelines, and budgets.

6. Client and Supplier Relationship Management:

· Build strong relationships with clients and suppliers, ensuring high satisfaction and retention rates.

· Act as a trusted advisor to deliver exceptional service and outcomes.

7. Market Expansion & Positioning:

· Establish ALBD Living as the leading boutique full-service studio in Singapore.

· Develop strategies to maintain thought leadership through speaking engagements, publications, and industry awards.

These KPIs ensure a balance between creative excellence, client satisfaction, and the company’s commercial success. Regular tracking and evaluation of these metrics will guide the continual improvement of both creative and strategic efforts.

Requirements:

· Bachelor’s Degree in Interior Design, Architecture, Business Administration, Marketing, or a related field.

· 10+ years of experience in a leadership role within the Interior Design, Branding, or Marketing industry.

· Proven track record of achieving financial growth, including meeting revenue targets.

· Demonstrated ability to oversee business operations, including design, project execution, and team leadership.

· Experience in client relationship management and supplier negotiations.

· Strong understanding of financial metrics such as EBITA, cost optimization, and pricing strategies.

· Familiarity with the Singapore and Australia markets is advantageous.

Skills:

· Leadership and Strategic Vision: Exceptional leadership skills to inspire and manage diverse teams and drive business growth.

· Financial and Operational Management: Expertise in achieving financial objectives and optimizing operational processes.

· Creative Excellence: Strong ability to champion innovative, high-quality design solutions.

· Client and Supplier Management: Outstanding interpersonal skills to build trust and deliver exceptional client outcomes.

· Business Development: Acumen for identifying and capturing new opportunities and expanding market presence.

· Team Building: Skilled in recruiting, mentoring, and fostering a collaborative work environment.

· Design and Branding Knowledge: Solid understanding of design principles, marketing strategies, and branding trends.

· Public Speaking and Thought Leadership: Ability to represent the company through speaking engagements, publications, and awards.

· These concise requirements and skills highlight the qualifications and expertise needed for the role.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Based on the master program, work out a schedule for shop drawing preparation/approval and material approval/procurement and monitor the status.
• Supervise BIM modelers to produce shop drawings.
• Liaise with the BIM team on drawings production to identify clashes with other trades.
• Review, coordinate, and liaise with Consultants and Subcontractors to define the Architectural construction details and interface to Structure and M&E services.
• Ensure compliance with construction drawings, project specifications, client's needs, and authorities' codes and standards.
• Verify site installation according to approved shop drawings and finalize as-built drawings.
• Review project specifications, technical clarification, and construction drawings, identify technical issues, and seek clarification.

Requirements:

• Candidate must possess at least a Professional Certificate, Diploma, or a Bachelor’s
• Degree in Building or Architectural from a recognized institution.
• Minimum 5 years of relevant experience in building projects
• Knowledgeable in Singapore Building Codes and Regulations for Code on Accessibility in the Built Environment, Approveddocument/Acceptable solution and Green mark issued by BCA
• Familiar with local standard quality implementation, BCA CONQUAS, and other Quality Mark Assessments Familiar with Safety aspects in the Construction industry.
• Preferable experiences in Hospital/Medical facility in Singapore.
• Preferable knowledge of BIM software / Autodesk Revit.

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620

• Design and shop drawing preparation & submission of automatic fire sprinkler systems.
• Prepare shop drawings from contractual drawing issued by main contractors’ assigned projects.
• Prepare preliminary schemes, penetration drawings as needed.
• Be able to produce pipe schedule hydraulics of his assigned project.
• Have understanding of equipment used in connection with each project.
• Prepare reports to Design Manager of deviations from original Tender drawings.
• Provide clear path of communication & coordination between his counterparts and superiors.
• Any other duties that may be assigned by the company.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Develop innovative design solutions and solve engineering problems.
• Deliver parts to production on time, cost and to specification
• Produce functional prototype products suitable for testing, review and demonstration
• Develop detailed specifications and design requirements
• Develop tests to replicate anticipated usage and optimise products to be robust and high performing
• Perform analysis on test failures and develop efficient solutions

About you

• A degree in Mechanical Engineering discipline or equivalent with relevant professional experience
• A creative and considered approach to problem solving, following clear design processes
• 2 + years of industry experience
• Practical and methodical design development expertise through prototyping and testing
• Knowledge and understanding of a broad range of engineering and technological disciplines
• Proven examples of developing a technically challenging design
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team
• Ability to plan, prioritise and co-ordinate your own time
• Knowledge and understanding of multiple manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days) while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 230 million units as of October 2023. For more information, visit www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

Responsibilities

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

Specific responsibilities include:

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.
• Develop test plans at block, sub-system, and chip level.
• Execute SoC-based verification at full-chip.
• Write C-based lib packages and tests.
• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.
• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.
• Automating the test environment for randomized testing and scoreboarding.
• Utilize advanced debugging techniques to identify and resolve design and verification issues.
• Perform root-cause analysis and work with design teams to fix identified issues
• Define and track functional and code coverage metrics to ensure thorough verification.
• Ensure that verification quality meets or exceeds industry standards and project requirements.
• Edge-based AI inference is preferred.

Requirements

What you need to have to be successful

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification
• Should have delivered multiple chips functioning to Specification.
• Identify and manage verification deliverables, milestones, and schedules.
• Proactively identify potential verification risks and develop mitigation strategies.
• Collaborate with design, architecture, and software teams to understand and verify design intent.
• Communicate verification progress, issues, and results to stakeholders and management.
• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges
• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.
• C-based verification in an SoC environment is required
• Experience with ARM processor-based designs and low-power design techniques is a plus.
• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile
• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5
• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

Experienced Art Instructor Required for Teaching in Schools and Social Centres

- Need to have experience in Art teaching (for children/adults/seniors)

- Minimum a Diploma in Art/Art education

- Must have MOE/NAC registrations as Art Instructor

- Ex Art Teacher most welcome

*Part-time basis with hourly rate from S$50 to $80

*Interested candidates do send me your CV and certifcations to [email protected]

*Our track record: https://www.pinterest.com/compositeAD/

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Assist in producing tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Involve in project planning, implementation and close monitoring of projects.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board).
• Engineers with minimum 1 years' experience in relevant engineering design work. Conversant with latest design codes and authority requirements (Codes of practice, directives, etc.).
• With good attitude towards work and timeline.