Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Design Manager reports to Design Lead and collaborates with Studio Manager. You will be responsible for implementing an appropriate framework and best practices and manage the design delivery process and essay a bridging role between the design and the delivery for Hospitality interior design projects.

Key responsibilities

• Understands and adheres to the Project Plan including project design and Financial goals.
• Drive the project design forward with the Design Lead from kick-off to completion.
• Support the Design Lead as required during Concept and Schematic phases and in preparation of presentations
• Fully involved in the project design development - work closely with the design teams from Design Development stage all the way to practical completion, ensure design information is of the right quality; oversee the drafting of detailed workings, drawings and specifications; prepare tender applications and make related presentations; Study construction documents and analyze and approve changes to construction design documents.
• Manage the quality of deliverables and ensure that Design documentation keeps pace with project timescales and projects come within budget and deadlines; keep consult with executives and make recommendations for resource allocation.
• Coordinate and foster teamwork between all project stakeholders – the design internally the Consultants externally

Support team through full project lifecycle from planning to construction.

Qualifications

• Hospitality Design related background in both Education and working experience
• Experience in Project design development
• Proficiency in Design program such AutoCad, Photoshop, SketchUp
• Good at presentation skill and client management

Requirement: CV with Updated portfolio

*commerical project

Key Responsibilities:

· Provide design guidance, creative direction, and innovative proposal to meet client requirements.

· Present and effectively communicate design intent during client pitches and project discussions.

· Efficiently handle multiple projects concurrently, overseeing them from start to finish, including sales, design, and execution phases.

· Ensure that all relevant submissions to the authorities are accurate and timely and comply with industry standards

· Coordinate with different stakeholders

· Ensure that projects are completed on time and meet client expectations.

Requirements:

· A recognized Degree/Diploma in Interior Design or an equivalent qualification.

· Proficiency in a range of design-related software, including Hand Sketch, Sketchup, AutoCAD, and similar tools.

· A minimum of 5 years of relevant experience in commercial design, showcasing strong technical knowledge in areas such as shop drawings, site surveys, and detail drawings.

· Proven experience in managing projects from start to finish, encompassing sales, design, and execution.

· Exceptional flair for creative design and a meticulous eye for design details.

· A collaborative team player with excellent communication skills, able to work effectively both within and across departments.

· Willing to travel overseas

Job Overview:

The Design Lead will play a pivotal role in shaping and executing our brand’s visual strategy. This individual will lead creative projects from concept to delivery, mentor junior designers, and ensure a cohesive look and feel across all digital, social, and physical brand touchpoints.

Key Responsibilities:

1. Design Strategy and Execution

• Develop and execute a consistent brand visual strategy across digital channels, including TikTok, Facebook, Instagram, and our e-commerce platforms.

• Translate marketing objectives into clear and effective designs, balancing aesthetics and functionality.

• Partner with the Head of Creative & Marketing and team to create compelling assets for product launches, campaigns, and digital advertisements.

2. Team Leadership and Collaboration

• Lead and mentor a small design team, providing direction, feedback, and professional growth opportunities.

• Collaborate with copywriters, social media managers, and external agencies to produce high-quality creative work.

• Foster a collaborative environment, encouraging experimentation and innovative design solutions.

3. Project Management

• Manage multiple projects simultaneously, ensuring timely delivery within brand guidelines.

• Review and prioritize project timelines, maintaining high standards of quality across all deliverables.

4. Design System Development

• Establish and maintain a design system that supports consistency across all brand materials.

• Stay updated on design and industry trends, ensuring our brand stays innovative and engaging.

5. User-Centric Approach

• Champion a user-first perspective, leveraging customer insights to refine and adapt design strategies.

• Conduct design reviews and use feedback loops to ensure optimal user experiences.

Qualifications:

• Bachelor’s degree in Design, Fine Arts, or a related field.

• 5+ years of experience in design roles, with a strong portfolio showcasing digital, social, and e-commerce designs.

• Proficiency in Adobe Creative Suite (Illustrator, Photoshop, After Effects) and design tools like Figma or Sketch.

• Experience in managing and mentoring design teams is a plus.

• Strong understanding of brand development, user experience, and design principles.

>> Job title: Restaurant Chef / Central Kitchen Chef

>> Location: Various Location

>> Working hours: 11am to 11pm

>> Salary: $3000 - $5000

>> Preference: Full-time job

HIGHLIGHTS:

- Attractive BONUS + Extra Incentives

- One-on-one coaching system

- Career Progression

- Frequent Bonding Events

- Personal Development Training

- Overtime, Hostel and Transport allowance 


RESPONSIBILITIES:

- Measuring meal ingredients accurately for the Senior Chef

- Preparing meals by washing, peeling, seasoning and chopping of vegetables and meats

- Preparing basic sauces for meals, as directed by the Senior Chef

- Receiving deliveries and verifying that all ordered items are received and are good quality

- Taking inventory of restaurant supplies and notifying the relevant person/s when stock is low

- Disposing of the expired and spoiled food items stored in stock rooms, refrigerators, and freezers

- Cleaning and ensuring that all the work stations are organised and properly sanitised

- Kitchen management, procurement of kitchen items and reports on the stock level of the food.

REQUIREMENTS:

- Team Player

- Good Learning Attitude

- Citizen or PR preferred

Red Chamber Entertainment Welcome you to join our team!

>> Job title: Restaurant Chef / Central Kitchen Chef

>> Location: Various Location

>> Working hours: 11am to 11pm

>> Salary: $3000 - $5000

>> Preference: Full-time job

HIGHLIGHTS:

- Attractive BONUS + Extra Incentives

- One-on-one coaching system

- Career Progression

- Frequent Bonding Events

- Personal Development Training

- Overtime, Hostel and Transport allowance 


RESPONSIBILITIES:

- Hiring, training, and managing staff, such as bartenders and waiters

- Managing inventory

- Opening and closing the restaurant

- Ordering supplies

- Promoting club/hiring or encouraging others to promote club

- Ensuring operations run according to safety and sanitation standards and laws

- Implement strategies for improved work performance

- Managers may also be in charge of developing revenue opportunities for the restaurant, such as recruiting talent or running promotions. Nightclub managers often work evenings, weekends, and holidays. The environment is usually loud and fast-paced.

REQUIREMENTS:

- Team Player

- Good Learning Attitude

- Citizen or PR preferred

Red Chamber Entertainment Welcome you to join our team!

>> Job title: Restaurant Chef / Central Kitchen Chef

>> Location: Various Location

>> Working hours: 11am to 11pm

>> Salary: $3000 - $6000

>> Preference: Full-time job

HIGHLIGHTS:

- Attractive BONUS + Extra Incentives

- One-on-one coaching system

- Career Progression

- Frequent Bonding Events

- Personal Development Training

- Overtime, Hostel and Transport allowance 


RESPONSIBILITIES:

- Measuring meal ingredients accurately for the Senior Chef

- Preparing meals by washing, peeling, seasoning and chopping of vegetables and meats

- Preparing basic sauces for meals, as directed by the Senior Chef

- Receiving deliveries and verifying that all ordered items are received and are good quality

- Taking inventory of restaurant supplies and notifying the relevant person/s when stock is low

- Disposing of the expired and spoiled food items stored in stock rooms, refrigerators, and freezers

- Cleaning and ensuring that all the work stations are organised and properly sanitised

- Kitchen management, procurement of kitchen items and reports on the stock level of the food.

REQUIREMENTS:

- Team Player

- Good Learning Attitude

- Citizen or PR preferred

Red Chamber Entertainment Welcome you to join our team!

>> Red Chamber Entertainment Pte Ltd

>> Job title: Restaurant Manager

>> Location: Foch Road

>> Working hours: 10.30am - 10.30pm (Shift Work)

>> Salary: $3500 - $4500

>> Preference: Full-time job

HIGHLIGHTS:

• Attractive BONUS + Extra Incentives
• One-on-one coaching system
• Career Progression
• Frequent Bonding Events
• Personal Development Training

RESPONSIBILITIES:

• Hiring, training, and managing staff, such as bartenders and waiters
• Managing inventory
• Ordering supplies
• Promoting club/hiring or encouraging others to promote club
• Ensuring operations run according to safety and sanitation standards and laws
• Implement strategies for improved work performance
• Managers may also be in charge of developing revenue opportunities for the club, such as recruiting talent or running promotions. Nightclub managers often work evenings, weekends, and holidays. The environment is usually loud and fast-paced.

REQUIREMENTS:

• Team Player
• Good Learning Attitude
• Citizen or PR preferred

Red Chamber Entertainment Welcome you to join our team!

The Digital Design Intern provides support to the Events and Programming team, assisting with creating still and motion graphics for CNBC International’s digital outlets, including desktop and mobile services and social media accounts. The role is ideal for university undergraduates aspiring to explore a career in design, video production, social media and/or journalism.

There may also be opportunities to participate in learning and development programs and events led by the NBCUniversal Early Careers team, including contributing to the Company’s diversity and inclusion initiatives.

• Work closely with graphic designers and producers on producing high-quality motion graphics for CNBC International’s digital video franchises
• Create animations and infographics to bring news and feature stories to life for CNBC social media
• Design eye-catching thumbnails for CNBC.com, YouTube, Instagram, TikTok and other social platforms
• Share and pitch ideas in team editorial meetings and brainstorming sessions

Job Responsibilities:

• Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.
• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.
• Prepare project schedule/timeline and manage deadlines for the delivery of projects on time.
• Conduct project meetings as and when required, eg. for issues resolution and updates.
• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.
• Managing client’s expectations during the project transition period.
• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required.
• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.
• Source for sub-contractors, suppliers and production material, when required.

Job Requirements:

• With 2 - 4 of working experience in managing interior fit out project in commercial office design & build
• Excellent communication skills
• Dynamic and comfortable working in a fast-paced environment.
• Comfortable in running a few projects in parallel (depending on the size of projects).

Location: Paragon, Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

We are seeking a highly skilled and 10+ Years of experienced OTM & Solution Design/Architect to join our dynamic team.

• Experience in Customer Handling.
• Hands on experience in OTM Functional Configurations in the following Modules (not limited) – Order Management, Shipment Management, execution and visibility, Finance, GTM, FTI and other modules.
• Expert in OTM core modules and over all understanding of OTM Technical Architecture
• Hands on experience in log files, Automation agent actions, procedure, packages, custom event, report configuration/registration and FTI
• Experience in OTM Customizations and Integrations with Oracle, SAP & legacy Applications
• Experience in fine-tuning and optimizing OTM configurations including Agents, saved queries/conditions.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Location: Paragon, Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

• Formal training in Jewellery Design
• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

Interested applicants may choose to apply / Contact me your updated resume for our consultant to find you a suitable oppurtunities

Contact Number : +65 90839650

LIM JUN SHENG Reg No: R22104301

The Supreme HR Advisory Pte Ltd EA No: 14c7279

We are seeking a creative and results-driven Marketing Executive to execute marketing strategies that promote our brand and products. The ideal candidate will have a passion for marketing, a strong understanding of digital and traditional marketing channels, and the ability to work collaboratively with cross-functional teams.

Key Responsibilities:

• Marketing Campaigns: Plan, develop, and execute marketing campaigns across various channels, including digital, print, and social media.
• Content Creation: Create compelling and engaging content for marketing materials, including blogs, newsletters, social media posts, and website content.
• Social Media Management: Manage and grow our social media presence, engaging with followers and driving brand awareness.
• SEO and SEM: Optimize website content for search engines and manage pay-per-click advertising campaigns.
• Event Coordination: Plan and execute promotional events, trade shows, and product launches.
• Brand Management: Ensure consistent brand messaging and identity across all marketing channels.
• Collaboration: Work closely with the sales team to align marketing efforts with business objectives and support lead generation.

Qualifications:

• Experience: Minimum of 1 years of experience in marketing, with a focus on digital marketing preferred.
• Education: Bachelor’s degree in Marketing, Business, Mass Communications, or a related field.
• Skills: Strong written and verbal communication skills, with the ability to create engaging content.
• Technical Proficiency: Proficient in marketing software and tools such as Google Analytics, SEO tools, social media management platforms, and email marketing software.
• Creativity: Creative thinker with the ability to develop innovative marketing ideas and campaigns.
• Team Player: Ability to work collaboratively with cross-functional teams and manage multiple projects simultaneously.
• Adaptability: Flexible and adaptable to changing priorities and market conditions.

Benefits:

• Health insurance
• Opportunities for professional growth and development
• Positive and collaborative work environment

How to Apply:

If you are a passionate marketer with a track record of success, we would love to hear from you. Please submit your resume by APPLYNOW.

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Singapore Based (Ang Mo Kio)

5 Days work per week (Mon – Fri 8.30am – 6pm)

$6000 to $9500

Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services. + Good knowledge in M&E works, planning capability and authorities / statutory compliance.

Minimum 8-10 years’ experience in Mechanical & Electrical services. + Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Career Progression Opportunities

Job scope

Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.

Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.

Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.

Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.

Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.

Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.

Plan and execute with tender team to achieve KPI.

Suggest Value Engineering solution for MEP works, if required, in the tender.

Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.

Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.

Provide technical expertise and guidance to support the decision-making process during tender evaluations.

Evaluating quotations from sub-cons/suppliers according to tender requirement.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Answering phones and taking messages
• Helping maintain the gallery’s inventory and client database
• Providing professional service to the collectors and artists
• Keeping the front and workshop desks and gallery spaces tidy
• Greeting visitors and helping them with their questions
• Dealing with correspondence and emails, and other daily administrative duties
• Helping build the gallery's follower base with social media posts
• Organization skills: An art gallery assistant needs to be highly organized.
• Communication: A gallery assistant needs great interpersonal skills, and should be an excellent communicator with the ability to talk to a wide range of people.
• Social media skills: A gallery assistant needs to be savvy with social media and proficient with commonly used computer programs.
• Initiative-taking skills: Being able to work independently and to take the initiative with new exhibitions.
• Proven work experience in retail sales, in lieu of a college degree can also be acceptable.

Job Description:

• Responsible for product design and user experience optimization for the AI accounting assistant, defining core functionalities and user workflows to ensure ease of use.
• Design basic UI prototypes and participate in user testing and feedback collection, driving continuous product improvement.
• Work closely with AI and backend engineers to coordinate project development progress, ensuring timely product launch.

Requirements:

• Bachelor’s degree or higher, with a preference for majors in computer science, design, product management, or related fields.
• At least 2 years of experience in product management or UI/UX design; experience in mobile product development is preferred.
• Familiar with writing product requirement documents (PRDs) and basic prototyping skills (such as Figma, Sketch).
• Strong user needs insight, able to quickly identify user needs and translate them into product features.
• Excellent communication and coordination skills; experience in financial or AI products is a plus.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

Location: South

Working days: 5.5 Days

Salary: Up to S$6,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).

The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.