• Responsible for the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tape out.
• Liaise with the front-end design team to complete the chip floorplan, clock architecture, and power plan.
• Study the physical design methodology of advanced process nodes and builds an automatic physical design platform.

Requirements:

• Degree or above in Electronic Engineering or equivalent.
• At least 5 years of hands-on project in digital backend design experience.
• Familiar with TCL, Perl, or Python script development with EDA tool design.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Responsible for RTL design, simulation, and verification for ASIC/SoC products.
• Identify internal and external requirements, PPA study, RTL coding, implementation and work closely with backend team.
• Create reusable internal IPs for AI and/or in-memory computing products.
• Handle IP integration and validation and support post-Si testing and validation.

​

Requirements:

• Degree in Electrical Engineering or equivalent
• At least 5 years of RTL/SoC/digital design with pre-layout simulation and post-layout simulation experience.
• Strong knowledge with Verilog and system Verilog, VCS, Verdi or other industry standard tools.
• Familiarity with AMBA APB AXI Protocol, RISC/Arm or other core architectures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tape out.
• Liaise with the front-end design team to complete the chip floorplan, clock architecture, and power plan.
• Study the physical design methodology of advanced process nodes and builds an automatic physical design platform.

Requirements:

• Degree or above in Electronic Engineering or equivalent.
• At least 5 years of hands-on project in digital backend design experience.
• Familiar with TCL, Perl, or Python script development with EDA tool design.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Responsible for RTL design, simulation, and verification for ASIC/SoC products.
• Identify internal and external requirements, PPA study, RTL coding, implementation and work closely with backend team.
• Create reusable internal IPs for AI and/or in-memory computing products.
• Handle IP integration and validation and support post-Si testing and validation.

​

Requirements:

• Degree in Electrical Engineering or equivalent
• At least 5 years of RTL/SoC/digital design with pre-layout simulation and post-layout simulation experience.
• Strong knowledge with Verilog and system Verilog, VCS, Verdi or other industry standard tools.
• Familiarity with AMBA APB AXI Protocol, RISC/Arm or other core architectures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Manage ASIC/FPGA project lifecycle, from requirements, design, technical architecture, implementation, testing, acceptance, training, and documentation.
• Maintain close monitoring of project progress and report potential risks and challenges in a timely manner with proposed course of actions.
• Determine and manage resources from start to finish with attention to budgetary limitations.
• Build and maintain relationships with external stakeholders.
• Oversee and/or prepare incoming and outgoing project documentation. • Technical leadership of project team.
• Perform HDL coding, synthesis, verification, timing closure, tapeout for project.

Requirements

• A bachelor’s or master’s degree in engineering or relevant fields.
• Strong team leader and individual contributor.
• Experienced candidate with experience in project management or team lead in product development.
• Experienced in HDL coding, FPGA implementation and ASIC tapeout.

If you are interested in the position , kindly send your CVs to sean.ho(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

Applicants must be fully vaccinated or have a valid exemption in accordance with MOM’s regulations to allow them to enter the workplace. Applicants may be required to share verifiable COVID-19 vaccination documents or proof of a valid exemption at the point of offer. Randstad Pte. Limited and/or the Client reserves the right to withdraw an offer if the applicant fails to provide verifiable COVID-19 vaccination and/or proof of exemption documents. EA: 94C3609 / Reg: R21103172

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Planning of shop drawings submission schedule to control the sequence and time frame for development of shop drawings.
• Prepare documents/samples submission schedule to control the sequence and timing for samples submission/approval with preferable float time allowed for procurements.
• Co-ordinate all related design matters with Consultants/ Client.
• Ensure main contract and sub-contract designs co-ordinated fulfil all design requirements.
• Co-ordinate with Contract team for any formal and informal changes made by Consultants.
• Co-ordinate with Contract team for proper sequence of sub-contract awards.
• Resolve technical problems for team.

Interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.Design / Technical Manager

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Tender Design Manager

• Salary range: $5000 - $7000
• Work location: 250 Jalan Kayu, Singapore 799475 [Sengkang]
• Working Days: 5.5 Days [Alternate Saturday]
• Working Hours: 9am - 6pm // 9am - 1pm

Responsibilities

• Study tender specifications and highlight what needs to be captured in costing
• Check tender drawings, go through with QS on what are the items to take off, supplier quotations to request (especially for special systems like foam, linear heat, video smoke imaging)
• Check tender clarifications / addendums for any design changes and advise cost impact
• Highlight design deficiencies in tender drawings
• Work out design and quantities for D&B tenders
• Provide technical guidance & training for QS
• Coordinate with Project / Zenith / A&A team for design queries when handing over jobs

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Work closely with design engineers and architects to define, document and implement detailed test plans for the SoC design verification.
• Create and maintain infrastructure/environment for automation verification of SoC architecture, function and performance.
• Build reusable testbench, constrained-random/directed test cases, and verification associated behavioural modules for both block levels and system levels.
• Use regression strategy, methodology and tool scripts and measure the function coverage.

Requirements:

• Degree in Electrical/Computer Engineering or Computer Science or equivalent.
• At least 5 years of experience in building verification infrastructure, test planning, coverage closure, testbench and test cases development for function/performance verification.
• Strong knowledge of UVM/OVM, Semiformal Verification, assertion-based verification, hardware and software co-verification methodology.
• Proficient with Verilog, System Verilog, Python/Perl/TCL/Shell scripting, C/C++, System C and industry mainstream ISAs assembly coding.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocol, RISC-V/ARM or DSP core.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Design and implement an intrusion detection system (IDS) specifically for monitoring and securing the IT-OT interfaces within power grid environments.
• Capture, decode, and analyze network traffic in the IT-OT domain of the ICS to detect and respond to potential security threats.
• Develop and refine algorithms and methods for detecting anomalous behavior or unauthorized access within the network.
• Collaborate with cybersecurity and network teams to integrate the IDS into the existing security infrastructure and workflows.
• Conduct continuous monitoring and periodic testing of the IDS to ensure its effectiveness and to update its capabilities in response to emerging threats.
• Prepare and maintain documentation related to the IDS, including system design, configuration, and operational procedures.
• Stay updated with the latest cybersecurity trends and advancements in intrusion detection technologies to recommend improvements to the IDS.

Qualifications & Experience:

• Bachelor’s or Master’s degree in Engineering, Computer Science, Information Technology, or related fields.
• Proficient in Python programming with demonstrated experience in developing and maintaining software solutions.
• Solid understanding of computer networks, including network architectures, protocols, and security measures.
• Experience with network analysis tools, with a preference for candidates familiar with Wireshark.
• Knowledge of Industrial Control System (ICS) protocols such as IEC 61850, MODBUS, and Ethernet/IP (ENIP) is highly beneficial.

Skills and Abilities:

• Strong analytical and problem-solving skills with a keen attention to detail.
• Ability to work independently and in a team environment, managing multiple priorities with minimal supervision.
• A proactive approach to identifying risks and implementing preventative measures.

About Us: HIGHLIGHT ART is a vibrant art space in Ann Siang Hill, showcasing a mix of contemporary art and cultural exhibitions. We aim to foster connections between artists and the community.

Job Description: Join our esteemed art gallery as Media and Graphic Design Assistant where your primary role will involve creating design works for exhibitions and promotional materials. You will also play a crucial role in managing our social media presence across platforms such as Instagram, Facebook, Xiao Hong Shu, and our official website.

Responsibilities:

• Lead gallery’s design production and planning of art exhibitions and publicity communications
• Design and produce graphic and written fabrications of exhibition materials, advertisements and innovate gallery’s promotional publications
• Based on content needs, engage in media layout arrangement and copywriting design; assist in design and aesthetic work for other departments.
• Process and edit digital photos and videos for events and marketing materials
• Collaborate closely with artists and team to ensure quality and timely completion of various design projects
• Effectively manage production budget by drawing on relevant knowledge and experiences
• Assist with the development and management of our social media accounts (Instagram, Facebook, Xiao Hong Shu) and website

Qualifications:

• Experience with design and art related fields, work experience in art institutions will be a plus
• Meticulous and disciplined with strong communication, interpersonal and organizational skills.
• Independent, resourceful and possess excellent time management skills.
• Excellent reading, writing, and speaking skills in both English and Chinese required.

• Manages day-to-day communications including coordinating and work with internal and external personnel
• Maintain and Monitor Project Plans, Schedules
• Supports technical team on document management, including submissions
• Organising, Attending, Participating in Contractors Meetings
• Manage and supervise project works as well as oversee all workers, and liaise with Interior Designer to ensure proper work execution and good workmanship
• Liaise and co-ordinate with Clients, Interior Designer, sub contractors on all project matters
• Resolve any Clients and / or residents’ complaints / feedbacks
• Coordinate the project work to ensure successful completion as well as hand over to the Clients
• Track work progress and submit progress report so as to ensure that the projects are executed on time and within budget

Senior C&S Engineer

Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt

Salary: $4000 - $6500

Job Scope:

• Civil & structure design, analysis and assessment for foundation, excavation, earth retaining structures, slope, instrumentation and site investigation.
• Plan, design, supervise & coordinate for civil structural engineering and infrastructure design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.
• Liaison with project stakeholders, clients other consultants, contractors and relevant authorities.
• Assist Team Leader in maintaining high-quality standards of design and supervision.

Requirements

• Bachelor of Engineering in civil and structural engineering recognised by PE Board.
• Minimum 5 years design experience in geotechnical and civil engineering projects in consulting firm.
• Well-versed in civil and structural design software.
• Familiar with authorities' submission requirements for engineering projects.
• Familiar with civil structural designs and BIM will be an advantage.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

The Humanities, Arts, and Social Sciences (HASS) Cluster at Singapore University of Technology and Design (SUTD) seeks applicants for a full-time lecturer or senior lecturer teaching-track position in the social sciences. Appointments will be made on an initial two- or three-year contract with the possibility of renewal, including opportunities for career development and promotion within the teaching-track.

We seek applicants from any of the social sciences (economics, sociology, anthropology, psychology, etc.) who have a strong background and interest in teaching classical and contemporary social science theory and methods. Successful applicants will teach in our team-taught introductory core course Social Science: Understanding Culture, Society and Behaviour. In addition, successful applicants will also teach 1 or 2 electives of their own design that contribute to our cluster’s teaching mission as a HASS cluster within an engineering and design university.

Candidates who can contribute through teaching and research to our Minor Degree program in Design, Technology, and Society—a design-focused variant of Science, Technology, and Society studies (STS)—are especially encouraged to apply. Potential to teach in our new Master’s degree in Human-Centred Design is also valued.

Applicants should have a Ph.D. in a social science discipline (broadly construed), with a proven track record of effective teaching and research in the applicant’s field of specialty.

The teaching load for teaching-track faculty is 6.5 course credits per calendar year.

Application Details

SUTD is a new research university established in collaboration with MIT and offers degrees in engineering, computer science, and architecture with a strong emphasis on nurturing socially cognizant innovators, technologists, designers, and entrepreneurs. The HASS department plays a pivotal role in the university’s commitment to world-class teaching and research excellence. The current HASS faculty bring core expertise in anthropology, history, literature, psychology, sociology, urban studies, and the digital humanities.

Candidates should submit the following materials through the SUTD Careers page.

1. A cover letter

2. A curriculum vitae

3. A statement of teaching experience and philosophy

4. A statement of current and future research plans

5. A 500-word description and selected bibliography of up to ten readings for two courses you may wish to offer OR two course syllabi

6. A writing sample, such as a submitted journal article

7. Names, affiliations, and email addresses of two references. Please note that candidates who advance to the interview stage will be asked to submit two letters of recommendation at that point. Please have your recommenders ready to send their letters via Interfolio or another means.

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Responsibilities:

• Member of VSAT product development team, contributing to the design of LNA and Power Amplifier
• Designing Up/Down Converters operating at Ka band frequencies

Requirements:
• Bachelor's Degree in Electronics Communication Engineering
• Minimum 3 years of experience in RF system/sub-system design
• Proficiency in RF circuit design, including LNA, PA, Up/Down Converter, Synthesizer, etc.
• Familiarity with RF test and measurement equipment
• Experience with simulation software such as AWR, ADS, HFSS, etc.
• Experience in VSAT system or subsystem design is advantageous

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Requirements:

- Support the marketing team in strategic, tactical creative plans to drive sales for our business and ensure brand growth through various marketing activities.

- End to end execution and management of marketing campaigns - from content generation to copywriting to compaigns tracking and reporting .

- Strategize, plan, create and deliver quality, engaging social media and digital content for company blog site

- Handle artwork and design

- Contribute ideas, design new artwork and have the expertise to work with a wide range of digital graphi tools to produce high-quality visual communications.

https://t.me/fastrecruitmentsg

Add this telegram group for more details of Work.

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

E-Commerce Assistant

5 Days Mon to Friday: 8.30am - 6pm

Salary: $2200

Address: Senoko Road (Company transport at Khatib and Admiralty MRT)

Job Requirements:

• Minimum Diploma Holders
• With minimum graphic design experience.

Job Descriptions:

• Create & maintain all E-commerce platforms content such as Qoo10, Lazada, e-shop, Shopee while ensuring all content (pages, products & price, etc) are updated and in line with guidelines/ reference at all times
• Manage product listing, price points and inventory levels
• Create awareness, marketing and maintenance for all social media platforms such as Facebook, Instagram and company website
• Developing concepts, graphics and layouts for products illustrations, production communication materials, digital printing such as online advertisements or promotions.
• Must possess minimum graphic design experience.
• Other ad hoc duties assigned

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Geotechnical Engineer

Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt

Salary: $3500 - $4200 (Based on experiences)

Job Scope:

• Plan, design, review and prepare drawings & specification & tender document
• Manage technical & engineering matter
• Resolve any technical difficulties & other problems that may rise
• Attending project technical
• Conversant with local codes and regulations Experience in engineering software Geotechnical Engineer
• Geotechnical design, analysis and assessment for ground improvement works, foundation, excavation, earth retaining structures, slope, instrumentation, and site investigation.
• Plan, design, supervise and coordinate for geotechnical/ civil engineering and infrastructural design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations, and Codes of Practice.
• Liaison with project stakeholders, clients, other consultants, contractors, relevant authorities.
• Assist Team Leader in maintaining high quality standards of design and supervision

Requirements:

• Bachelor’s Degree in Civil Engineering
• At least 2 – 3 years’ experience with geotechnical

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.



Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following:

a. Design of automation or semiconductor equipment

b. High precision machine design

c. Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Salary: $3,000 - $4,000
Working Timing: Monday to Friday – 9 am to 6 pm
Working Location: Near Aljunied / MacPherson / Paya Lebar MRT

Requirements:

• Minimum Diploma or equivalent.
• Min 2 years relevant experience
• Experience in project management (Able to handle Projects ), A&A works, M&E services, As-Built drawing, site supervision and coordination, compliances, and regulations.
• Knowledge / Related Experience in ACMV, Electrical, Fire Protection System, Plumbing and Sanitary Services, and installation of M&E Services on site

Responsibilities:

• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.
• Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.
• Liaise with clients and consultants on project.
• Produce proper reports and documentation before and after project completion.
• Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.
• Assist to update of As-Built drawing on site.
• And all other General Administration works as instructed.

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279