• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Senior C&S Engineer

Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt
Salary: $4000 - $6500

Job Scope:

• Civil & structure design, analysis and assessment for foundation, excavation, earth retaining structures, slope, instrumentation and site investigation.
• Plan, design, supervise & coordinate for civil structural engineering and infrastructure design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.
• Liaison with project stakeholders, clients other consultants, contractors and relevant authorities.
• Assist Team Leader in maintaining high-quality standards of design and supervision.

Requirements

• Bachelor of Engineering in civil and structural engineering recognised by PE Board.
• Minimum 5 years design experience in geotechnical and civil engineering projects in consulting firm.
• Well-versed in civil and structural design software.
• Familiar with authorities' submission requirements for engineering projects.
• Familiar with civil structural designs and BIM will be an advantage.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• Prepare construction drawings including shop drawings submissions and approvals.
• Manage work progress on site, and work closely with consultants, sub-contractors and operation teams.
• Liaise with a team of BIM Modellers in the design and coordination works.

Requirements:

• Degree in Architecture
• At least 3 years of experience in Main Contractor.
• Competent to read and understand construction drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for RTL design, simulation, and verification for ASIC/SoC products.
• Identify internal and external requirements, PPA study, RTL coding, implementation and work closely with backend team.
• Create reusable internal IPs for AI and/or in-memory computing products.
• Handle IP integration and validation and support post-Si testing and validation.

​

Requirements:

• Degree in Electrical Engineering or equivalent
• At least 5 years of RTL/SoC/digital design with pre-layout simulation and post-layout simulation experience.
• Strong knowledge with Verilog and system Verilog, VCS, Verdi or other industry standard tools.
• Familiarity with AMBA APB AXI Protocol, RISC/Arm or other core architectures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

SALT is hiring Senior Designer for a Social Media client on a renewable contract role. In this role, you will be responsible for transforming important business narratives into compelling keynote presentations and creating engaging visuals or motion graphics for social media placements.

Responsibilities:

• Thoughtfully visualise facts and figures as graphics or animation for keynote presentations.
• Create visuals or motion graphics that surprise and delight social media users.
• Methodically present complex information in layouts that aid readability and comprehension.
• Collaborate with Content Lead to create refreshing and relevant content through iterative design sprints and brainstorms.
• Define or enhance the tonality of a narrative’s messaging by using the right imagery that evoke the appropriate mood for a presentation.
• Act as a brand custodian by ensuring the work strictly adheres to the company’s brand guidelines.

Qualifications:

• A strong portfolio that demonstrates the ability to process and transform complex information into compelling visuals.
• Minimum of 5 - 7 years of experience in Graphic Design.
• Ability to produce simple 2D motion graphics.
• Experience in designing for print is a plus, especially if it includes annual reports.
• Design experience in executive communications or other equivalent roles that services corporate leadership is a plus.

If this role sounds like your ideal job move, please reach out to me, Jaya at [email protected]alternatively you may apply via the system!

Regret only shortlisted candidates will be notified.

CEI No: R1659595 / EA No: 07C3147

• Work closely with design engineers and architects to define, document and implement detailed test plans for the SoC design verification.
• Create and maintain infrastructure/environment for automation verification of SoC architecture, function and performance.
• Build reusable testbench, constrained-random/directed test cases, and verification associated behavioural modules for both block levels and system levels.
• Use regression strategy, methodology and tool scripts and measure the function coverage.

Requirements:

• Degree in Electrical/Computer Engineering or Computer Science or equivalent.
• At least 5 years of experience in building verification infrastructure, test planning, coverage closure, testbench and test cases development for function/performance verification.
• Strong knowledge of UVM/OVM, Semiformal Verification, assertion-based verification, hardware and software co-verification methodology.
• Proficient with Verilog, System Verilog, Python/Perl/TCL/Shell scripting, C/C++, System C and industry mainstream ISAs assembly coding.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocol, RISC-V/ARM or DSP core.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The work at SUTD offers opportunity, an environment, a culture – and benefits – that just aren't found together anywhere else. If you're curious, motivated, want to be part of a unique community, and help shape the future – then take a look at this opportunity.

Research Fellow, Science, Mathematics and Technology Cluster – LBELL group, to work on cutting-edge brain-inspired computing research as a member of the group that includes Desmond Loke and Yu Jiang. There will be a possibility to work with external collaborators for the deployment of brain-inspired computing algorithms.

Job Scope

• The candidate will join an interdisciplinary and highly collaborative team of Scientists and Engineers.
• Responsible for enhancing the LBELL group's capability in brain-inspired computing development, and design of algorithms, overseeing model development and technology use, maintenance, and troubleshooting;
• Communicating results to the scientific community through publications and presentations; and
• Supervising undergraduate students and laboratory technicians.

Job requirements

Required: a Ph.D. in mathematics, computer science or a related field; prior experience with machine learning, programming is required; experience with software system; strong interpersonal and oral presentation skills; self-motivation; and attention to detail. Must be able to follow safety protocols and maintain a safe work environment, contribute as part of a multidisciplinary team, execute detailed technical procedures meticulously, and prioritise and perform multiple tasks in a dynamic work environment. Supervisory experience is preferred.

• Implement IC design development of products, Logic Synthesis and Static Timing Analysis
• Manage DFT related activities - Scan Insertion, ATPG, Pattern Validation
• Assist in debug & correct any functional issues found in taped-out devices

Requirements:

• Degree in Electrical/Electronics Engineering or equivalent
• At least 5 years of digital IC design experience using EDA tools (Cadence, Synopsys)
• Proficiency in Verilog HDL and VHDL RTL design, Logic Synthesis, DFT, ATPG, Timing Closure

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

SUTD invites applications for a Research Fellow position in a research project to develop intelligent, secure, and resilient future communications systems. In particular, to support a diverse set of use cases with ever-increasing requirements, the architectural design of 5G and future 6G systems emphasizes software-defined reconfigurability and AI-enabled intelligent operations. Open RAN --- as a generic term used by the community for an open radio access network architecture --- is viewed as a promising way to achieve this design objective. While open RAN promotes interoperable interfaces, RAN virtualization, and support for big data and AI-enabled RAN, its success requires us to overcome multiple challenges --- in particular, how to build intelligence and adaptability into such a system while still providing high assurance regarding its security and resilience. Our project aims to lay a solid foundation for designing secure and resilient open RAN systems.

The application should contain a complete resume, a cover letter describing the applicant's background (a PhD in Computer Science, Computer Engineering, Telecommunications, or related disciplines, is required), past research experience and technical skillset, and contact information of up to three references.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Semiconductor Equipment Design.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

A research fellow or postdoctoral researcher is needed in NRF ANR project to work on the new nanostructured materials for energy storage materials. The project is to understand the catalytic effect based nanomaterials ad their applications in the anode materials of lithium ion batteries.

We request to hire a PhD degree holder in the research field of material science and chemical engineering. The researcher is requested to work with the team on the preparation of the materials and evaluation of the prototype performance in the field.

He/she will design materials and devices. He will be in charge of materials synthesis, characterization and final prototype evaluation. Required skills include multiple fabrication and characterization tools in material science including various deposition techniques, SEM, XRD, Raman, electrochemical evaluation systems. Desired skills include research experience in energy storage, electrode design, and ion intercalation process.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Salt is looking to hire a Senior Art Director on a 6-month extendable contract assignment for a Social Media client. In this role, you will work with a highly cross-functional team of creatives, marketers, product leaders and business leaders to deliver fresh, original and renowned ideas that resonate with businesses in Asia Pacific.

Responsibilities:

• You will develop integrated campaigns and events that service a number of different audiences including (but not limited to) creative agencies, media agencies, marketing verticals (gaming, automotive, consumer, etc.), small to large sized businesses, and our global sales organization.
• You will also work on policy initiatives and be able to touch programs, content and advertising that scales globally.
• Work with a writer, creative lead, and/or independently to deliver strategically grounded, world-class creative concepts and designs for digital, video, print, and experiential projects
• Influence peers and managers and build consensus, while dealing with ambiguity.
• Deliver compelling visuals that are delightful, beautiful, and clear with a high level of finish and polish across a variety of mediums (print, video, interactive, presentation) and across a suite of styles (campaign design, brand marks, illustrations, icons, photography).

Qualifications:

• 10+ years’ experience as a Senior Art Director/ACD at a digital agency, advertising agency or an in-house team member
• Knowledge and proficiency in Photoshop, Illustrator, InDesign and After Effects
• Working knowledge of Figma
• Ability to design motion graphics with basic animation capabilities.
• Experience designing for Print, Web, Responsive, and Mobile
• Experience in B2B marketing is a plus.
• Applications must include a portfolio link to samples of your work

If this role sounds like your ideal job move, please reach out to me,

Jaya at [email protected] alternatively you may apply via the system!

Regret only shortlisted candidates will be notified.

CEI No: R1659595 / EA No: 07C3147

about the company

My client is a leading manufacturer of analog electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of high-speed low-power small-area network chips
• Support high-level functional development and verification of analog and mix-circuit circuitry
• Lead analog designs during product development
• Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, ADCs, DACs, PLLs, LDOs, ESD/EMC suppression

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with analog / mixed-signal ICs circuit design
• Willing to work in a new start up entity in Singapore
• Proficient in one of the following : ADCs, DACs, PLLs, LDOs, ESD/EMC suppression
• Project experience in one of the following areas : ADC-DAC design PLL or clock/freq generation design/power management
• Solid experience in Using EDA CAD tools and performing Analog Custom Layout
• Experience in measuring IC performance and debug of design to correlate simulations to measurements
• Knowledge & experience in Verilog coding a plus

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913