• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Duties & Responsibilities

1. Ensure efficient and effective management of design activities on tenders and projects to ensure that all design requirements of the contract are fulfilled
2. Ensure compliance with legal and other requirements, including standards and codes of practice, relating to the design
3. To oversee and supervise existing design team
4. Ensure design process and submissions comply with statutory regulations and requirements
5. Responsible to provide a fully functional structural system, analysis and calculations to fulfil adequate structural integrity and accuracy of the design
6. Must be able to lead, manage and check all kinds of design drawings by members
7. Coordination with relevant departments during the Design stage
8. Ensure that all technical/detailed drawings are compliant with the relevant codes and/or regulatory requirements
9. Ensure that all drawings must be done with constructability to site requirements, be practical, easy to understand, able to meet clients expectations and good profitability for the Company
10. To provide evaluation/findings and project results to HQ Tokyo in Japan on a frequent basis

Requirements:

1. Degree/Masters in Architecture/Engineering or equivalent
2. Minimum 12 years of working experience in the related field
3. Proficient in Software such as AutoCAD, Revit, etc.
4. Able to lead a team
5. Fluency in spoken and written Japanese is necessary as the incumbent will be required to communicate and collaborate with counterparts in Japan, Tokyo Head Office such as monthly progress reports
6. Ability to prioritize tasks well and able to work independently
7. Required to be resourceful, pay attention to details and has good communication skills

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Key Responsibilities

* Design and analyze cabin interior and mechanical components in support of aircraft interior modification projects.

* Develop drawings (e.g. LOPA, installation drawings, production drawings, etc), work instructions, procedures and recommendations.

* Develop engineering substantiation reports (e.g. Weight & Balance, Structural, Flammability reports) and Engineering Authorizations (EAs).

* Coordinate with FAA DERs and DARs, EASA CVEs and/or local civil aviation authorities for any necessary assistance and/or approvals.

* Support interior and mechanical aspects of proposal development, customer and supplier meetings including onsite modification technical support.

* Other duties as assigned.

* Temporary assignment travel of up to 3 months in the US and other countries in Asia is required.

REQUIREMENTS

- Bachelor Degree in Engineering (Aerospace or Mechanical Engineering); Experience in related commercial aircraft field either in cabin interior design or technical services would be an added advantage.

- Able to research and analyze Boeing or Airbus documents (e.g. SRM, IPC, AMM, etc.) as well as Original Equipment Manufacturer (OEM) documents (e.g. Service Bulletins, CMM, etc.).

- Able to create engineering installation and assembly drawings using CATIA V5 or INVENTOR and AutoCAD. The candidate should already understand standard engineering drawing convention such as ASME Y14.5.

- Knowledge of aircraft seating, interior components (e.g. carpets, curtains, galleys, partitions, floor and ceiling structures, etc) and décor materials.

- Knowledge of aircraft structures analysis using both Classical and FEA Methods and ability to use FEA software such as ANSYS/NASTRAN an added advantage.

- Knowledge of FAA CFR 14 Part 25 and equivalent EASA CS Regulations.

- Candidates with at least 3 to 5 years of relevant experience will be considered.

Note: Certain AAR job assignments or facilities may require proof of US Citizenship and the ability to qualify for, and maintain, applicable US Defense Security Service Clearances.

Please email your resume to [email protected] or send it to 7 Changi Business Park Vista, #03-01 SooKee HQ, Singapore 486042 and attention it to the Managing Director of AAR Engineering Services – Asia.

Exciting role in Sports Programme in Public Sector
Contract: 12 months
Salary: Up to $3500

Job Responsibilities:

• Provide support in the procurement, coordination of vendors and liaison with Centres and Sport Centres
• Monitoring/supervision of programme delivery, feedback and compliance checks
• Stakeholder management for all programmes/projects
• Back-end administration of programme delivery (data collection, cleaning, and uploading to online folders, preparticipation screening, app downloads, 1-2-1 support for participants when required).
• Engagement activities in and out of lab
• Observation of staff training, and all training associated administration.
• Other adhoc duties as assigned.

Looking for:

• Min. Degree in Sports Science or Health related areas
• Trained in Sports Science, has sound exercise science knowledge
• Has preferably experience in small group coaching with interest in community health etc

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence.
Only shortlisted candidates will be contacted.

Chloe Chew (R1768631)
ScienTec Consulting (ScienTec Personnel) - 11C578

Job Description

• Develop control solution related to Semiconductor equipment.
• Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc
• Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability
• Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc
• Integrate and test subsystems

Requirement

• Bachelor’s Degree in Electrical Engineering or equivalent
• At least 5 years working experience in capital / semicon equipment electrical system design
• Familiar with AC & DC application, motors, sensors, etc
• Experience in semiconductor equipment industry or high precision automation equipment industry
• Familiar with communication protocol, such as Ethernet, RS232, etc
• Working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.
• Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues
• Experience in Electrical CAD tools
• Experience in PCB design is an advantage

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Role:

Electrical and Control Design Engineer (Up to $5800)

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Senior Advertising & Promotion Executive

5 days work week
10am - 6pm
Bukit Merah
$3200 - $3800

Responsibilities

• Market Research: Conduct market research to gather information on target demographics, consumer behaviour, industry trends, and competitor analysis.
• Content Creation: Assist in creating marketing materials such as social media posts, blog articles, promotional emails, or advertising copy.
• Advertising Campaigns: Support the planning, execution, and analysis of advertising campaigns, which may include online ads, print ads, and more.
• Email Marketing: Help with email marketing campaigns, including list management, content creation, and performance tracking.
• Graphic Design: Create or assist in the creation of marketing materials, graphics, and visuals for various advertising and promotional materials.
• Market Planning: Contribute to the development of marketing and advertising plans, including setting goals and objectives, budgeting, and timeline management.
• Branding: Assist in maintaining and enhancing the company's brand image and identity through consistent messaging and design.
• Learning and Development: Continuously learn about the latest marketing trends and tools, and apply that knowledge to improve marketing strategies.

Requirement:

• Good photography or videography skills.
• Experience in photo or video editing.
• Must be able to use adobe creative cloud
• Must know how to use Xiao Hong Shu, Tiktok, Ads Manager, Shopify, Instagram/Facebook and lastly Wechat
• Bachelor in any related field.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

• Will be assigned to a project to provide technical support and department relevant responsibilities.
• Assisting C&S lead/technical manager & in charge for all civil / structural engineering matters being tasked
• Attending and being proactive in design coordination meeting with consultants / client.
• Preparing and reviewing of shop drawings / materials / MOS
• Ensure drawing registry is maintained and latest drawings / BIM models are available for all parties involved (site staff, CTD, suppliers and subcontractors).
• Ensure transmittal forms / emails are issued for latest drawings / BIM models when issued to CTD, suppliers and subcontractors.
• To study & review drawings / specifications in identifying discrepancies and issue queries to consultants accordingly via RFI
• Resolve technical issues on drawings and liaise closely with Consultants, all trades and authorities.
• Ensure BIM team update the drawings / BIM Model with the latest information available timely.
• Upkeep all submission, response for the submission and approval. Monitor the status of the submission and pursue response from the relevant parties once the response is due.
• Prepare as-built drawings / BIM Model and compile O&M Manual for submission.
• Attending VDC for civil / structural related matters. Cross check BIM model with contract drawings.
• To ensure works are carried out in accordance with drawings, specifications and PE design.
• To ensure material testing are carried out in timely manner and as per the specifications.
• To identify and resolve any potential site issues at the work site from technical aspect
• Attending sub-con meetings and technical meetings for structural related matters; prepare and circulate meeting minutes in a timely manner.
• Ensure all structural submissions (as-built, ST COS etc) are done prior to TOP application.
• Work with senior, PM and Site Manager in planning and executing temporary works.
• Preparing as-built drawings and submission of O&M.
• Assisting senior for structural matters related to CONQUAS assessments / submissions.

Job Requirements:

• Degree in Civil / Structural or a related discipline
• A minimum of 3 years of relevant experience for Structural engineer & 6 years of relevant experience for Senior engineer
• Proficient in Microsoft Office, AutoCAD and proficiency in BIM.
• Understanding of structural engineering principles and practices.
• Knowledge of authority submission requirement
• Able to communicate with consultants, client, authority/government agencies and site supervisors.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Senior Advertising & Promotion Executive

5 days work week
10am - 6pm
Bukit Merah
$3200 - $3800

Responsibilities

• Market Research: Conduct market research to gather information on target demographics, consumer behaviour, industry trends, and competitor analysis.
• Content Creation: Assist in creating marketing materials such as social media posts, blog articles, promotional emails, or advertising copy.
• Advertising Campaigns: Support the planning, execution, and analysis of advertising campaigns, which may include online ads, print ads, and more.
• Email Marketing: Help with email marketing campaigns, including list management, content creation, and performance tracking.
• Graphic Design: Create or assist in the creation of marketing materials, graphics, and visuals for various advertising and promotional materials.
• Market Planning: Contribute to the development of marketing and advertising plans, including setting goals and objectives, budgeting, and timeline management.
• Branding: Assist in maintaining and enhancing the company's brand image and identity through consistent messaging and design.
• Learning and Development: Continuously learn about the latest marketing trends and tools, and apply that knowledge to improve marketing strategies.

Requirement:

• Good photography or videography skills.
• Experience in photo or video editing.
• Must be able to use adobe creative cloud
• Must know how to use Xiao Hong Shu, Tiktok, Ads Manager, Shopify, Instagram/Facebook and lastly Wechat
• Bachelor in any related field.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

• Location: Paragon, Orchard Road
• Working Days: 5-day work week, full time employment
• Working Hours: 10.45am – 9pm
• Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Role:

Business Development / Marketing Manager (B2B / Commercial Office Interior Design)

• Location: Tanjong Pagar
• Working Days: 5 days, Monday-Friday
• Working hours : 9am to 6 pm
• Salary : $4,000-$5,000 + commission

Responsibilities

• Managing both our existing clients and developing new business opportunities
• Take a lead role in the development of proposals and presentations for new business materials to create and nurture business opportunities and partnerships
• Identify trends and customer needs, building a short/medium/long-term sales pipeline in accordance with the requirements
• Responsible for price quotations submission and negotiation with the client
• Identifying and mapping business strengths and customer needs
• Reporting on successes and areas needing improvements
• Maintain existing business and strong customer relationship
• Think critically when planning to assure project success

Skills & Requirements

• Minimum 3 years of working experience preferably sales technique in a commercial office interior design firm, or equivalent
• Experience in managing complex sales cycles with B2B selling processes to multinational companies in Singapore

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745