Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Halo Microelectronics, a developer of Analog and Mixed Signal Integrated Circuits enabling energy-efficient smart systems is looking for experiences Analog Circuit Design Engineers to join the Singapore Design Team.

Responsibilities:

* Transistor level design of Analog circuits, simulation, evaluation and characterization, system verification.

* Circuits design includes reference, amplifiers, drivers, LDOs, switching regulators or other mixed signal circuits.

* Coordinate with Layout Engineer in layout/mask design.

* Coordinate with application and product engineer, testing engineer to bring the products to production successfully.

* Work with application engineer and FAE to solve customers technical issues.

Qualifications:

* Strong educational or industrial background in Analog Circuit Design.

* Experience with bipolar and CMOS IC design.

* Personal character and team building skills essential to enabling on-time delivery of devices.

* Ability to work independently

* Must demostrate good communication and interpersonal skills.

* Must be able to perform as a team member.

Responsibilities:

• Understand project requirements and design concepts to translate conceptualise design ideas into drawings
• Prepare layout plan, 2D construction Drawing, shop drawings, section details, space planning in fast-paced work environment
• Work closely with interior designer and sales designer to deliver high quality work
• Revise drawings and layouts to accommodate changes and enhancements
• Perform other duties as assigned by the superior

Requirements:

• Junior position at least 1 year and senior position at least 3 years experience
• Passionate in interior design, and able to manage new and existing projects to achieve project objective
• Required Skill(s): Autocad, Photoshop
• Can do attitude and able to multitask & work independently with minimum supervision
• Candidates who can start work immediately or on short notice will have an added advantage (Singaporean & Permanent Resident preferred)

Responsibilities:

• Design and produce engaging graphics and visual elements for events activations.
• Develop creative concepts and presentations
• Ensure brand consistency across all event materials and platforms.
• Manage multiple design projects from concept through to completion, adhering to deadlines and budget constraints.
• Work with external vendors and suppliers to ensure high-quality production of materials.
• Stay abreast of the latest trends in event design, technology, and graphic design to incorporate innovative ideas into event activations.

Skills:

• Proficiency in Adobe Creative Suite.
• Ability to interpret brand guidelines and client briefs to produce creative and effective designs.
• Strong understanding of branding, layout, color theory, and typography in both print and digital contexts.
• Ability to think creatively and translate ideas into designs that capture the essence of the event.
• Excellent organizational and time management skills; able to manage multiple projects simultaneously.
• Strong communication and collaboration skills to work effectively with cross-functional teams and clients.
• Knowledge of current design trends and techniques specific to events and activations.

Requirements:

• Bachelor's degree in Graphic Design, Visual Arts, or a related field.
• 2-3+ years of professional design experience, preferably in a similar role.
• Experience in an event activation company or similar environment is a plus.
• A strong portfolio of design work, including digital and print projects.
• Excellent communication and collaboration skills to work effectively with teams across the organization.

*Please take note that applicants with no Creative Portfolio attached will not be considered.

Summary:

We are seeking a talented Account Executive to join our team. The ideal candidate will have a passion for creativity, excellent communication skills, and a strong understanding of account management in the events and exhibitions industry.

Key Responsibilities:

• Identifying and pursuing new business opportunities aligned to Pico’s broad service capabilities in events, exhibitions, retail, experiential marketing, content, and technology.
• Lead pitches and proposal development. Includes working with the relevant team and producers to pull together the required Specialist Services to develop the proposal.
• Competent in leading client’s strategies and to identify client’s needs and to create strategies to meet those needs.
• Grow the business both locally and regionally through a strategic account management approach and look to continuously improve the planning and execution of activities planned by our clients.
• Key responsibility is to establish and maintain relationships with identified clients, both new and existing. Hosting of regular POV meetings with the client to share insights and extend the value creation will be expected of you.
• Forge relationships with new clients and strengthen those with existing clients through the implementation of communication plans, thus creating strong visibility to the strategic support that is provided.

Requirements:

• Diploma in Business Administration, Marketing, or related field.
• Ability to effectively engage with professionals from client side, as well as understand, navigates, and manages complex, hierarchical corporate clients.
• Exposure on different types of projects such as events, multi-media, online, interactive, direct marketing and social media, etc.
• Ability to effectively manage project teams assembled from different business units within a large corporate agency.

*Please note that applicants with higher level of experience will be considered for a more senior role.

Summary:

The Associate Producer will play a key role in supporting the production of events, exhibitions, and experiential marketing projects. This position requires a detail-oriented individual with excellent project management skills and a passion for creative solutions. The Associate Producer will work closely with senior producers, creative teams, and clients to ensure the successful execution of projects from conception to completion.

Role & Responsibilities:

• Assist in the planning, coordination, and execution of events, exhibitions, and experiential marketing projects.
• Work closely with the Account Managers and Senior Producers to develop project timelines, budgets, and deliverables.
• Coordinate with internal teams (design, production, logistics) and external vendors to ensure project requirements are met.
• Support the development of creative concepts and proposals in response to client briefs.
• Manage project documentation, including schedules, budgets, and contracts.
• Assist in on-site event management, ensuring smooth operations and addressing any issues that arise.
• Maintain clear and effective communication with clients, providing updates and addressing any concerns.
• Conduct post-event evaluations to identify areas for improvement and gather client feedback.
• Stay updated on industry trends and best practices to bring innovative ideas to projects.

Qualifications:

• Diploma or bachelor’s degree in Event Management, Marketing, Communications, or a related field.
• At least 4 years of experience in event production, project management, or a related role.
• Strong organizational and time management skills, with the ability to manage multiple projects simultaneously.
• Excellent communication and interpersonal skills.
• Creative problem-solving skills and a keen eye for detail.
• Ability to work under pressure and adapt to changing project requirements.

Roles & Responsibilities

1. Applicant must at least have more than 2 years of stage performing

2. Recruit performing artiste and singers when needed

3. Participate in all stage performances

4. To train & guide the stage crew to improve on their performances

5. In charge to schedule and selection of performing artiste for specfic event's performances

6. Coordinate & attend all training & rehearsal

7. Source for necessary accessories and props for all performances.

8. Singing & Dancing skill

9. To ensure all stage crew is presentable on stage

Roles and Responsibilities:

1. Administrative Support : Provide administrative assistance to the sales team.
2. Maintain organized records and documentation.
3. Communication: Answering and directing phone calls, responding to emails, and facilitating communication with clients
4. Purchasing and Customer Liaison: Handle purchasing tasks and coordinate with suppliers and customers & Production. Ensure timely follow-ups and smooth communication.
5. Order Processing and General Duties: Process delivery orders, invoices, and related documents. Perform other ad-hoc duties as assigned.

Requirements:

• Education: Minimum ITE or Diploma qualification.
• Training: On-the-job training provided.
• Language Skills: Proficient in written and spoken English & Chinese

Administrative assistants should have strong communication and interpersonal skills, as well as excellent time management and organizational skills.
They should also be proficient in MS Office, especially MS Excel and MS PowerPoint.

Email your Resume & Photo : [email protected] / WA : 8543 1772

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.

Requirements:

More than 10 years Construction Supervisor experience.

Can write and speak in Chinese & English.

• Handle full set account.
• Prepare monthly cash forecast and perform monthly bank reconciliation and various account reconciliations including inter-company transactions.
• Prepare management/financial reports, month end/ year end closing.
• Assist in company secretarial matters by liaising with company secretarial agents.
• Perform ad-hoc tasks assigned by Group CEO and Group CFO.

Purpose of the Role:

The Design & General Manager at ALBD Living, Singapore, will be pivotal in driving the company’s vision to become the leading boutique full-service Interior Design, Marketing, and Branding Studio. This role combines strategic leadership with hands-on management to ensure operational excellence, financial growth, and the delivery of exceptional design solutions. By fostering innovation, building strong client and supplier relationships, and cultivating a high-performing team, the Design & General Manager will position ALBD Living as a thought leader and a trusted partner in the industry.

Key Responsibilities

1. Operational Leadership:

· Oversee all aspects of the Singapore office, including design, client service, and project execution.

· Manage performance targets, KPIs, and budgets to achieve financial and strategic goals.

· Ensure operational efficiency, optimize processes, and maintain compliance with regulations.

2. Financial Management:

· Achieve EBITA targets (20%) by improving operating ratios, pricing strategies, and supplier relationships.

· Drive financial growth with a minimum benchmark of SGD $3M in revenue within 12 months.

3. Organic Revenue Growth:

· Focus on expanding the Singapore/Australia client base through new acquisitions and enhancing relationships with existing clients.

4. Leadership and Team Development:

· Recruit, train, and lead a high-performing team in a collaborative and scalable work environment.

· Conduct workshops and training sessions to develop skills and prepare the team for future growth.

5. Design Excellence:

· Champion innovative and high-quality design solutions aligned with ALBD Living’s brand vision.

· Ensure projects meet exceptional standards for creativity, functionality, timelines, and budgets.

6. Client and Supplier Relationship Management:

· Build strong relationships with clients and suppliers, ensuring high satisfaction and retention rates.

· Act as a trusted advisor to deliver exceptional service and outcomes.

7. Market Expansion & Positioning:

· Establish ALBD Living as the leading boutique full-service studio in Singapore.

· Develop strategies to maintain thought leadership through speaking engagements, publications, and industry awards.

These KPIs ensure a balance between creative excellence, client satisfaction, and the company’s commercial success. Regular tracking and evaluation of these metrics will guide the continual improvement of both creative and strategic efforts.

Requirements:

· Bachelor’s Degree in Interior Design, Architecture, Business Administration, Marketing, or a related field.

· 10+ years of experience in a leadership role within the Interior Design, Branding, or Marketing industry.

· Proven track record of achieving financial growth, including meeting revenue targets.

· Demonstrated ability to oversee business operations, including design, project execution, and team leadership.

· Experience in client relationship management and supplier negotiations.

· Strong understanding of financial metrics such as EBITA, cost optimization, and pricing strategies.

· Familiarity with the Singapore and Australia markets is advantageous.

Skills:

· Leadership and Strategic Vision: Exceptional leadership skills to inspire and manage diverse teams and drive business growth.

· Financial and Operational Management: Expertise in achieving financial objectives and optimizing operational processes.

· Creative Excellence: Strong ability to champion innovative, high-quality design solutions.

· Client and Supplier Management: Outstanding interpersonal skills to build trust and deliver exceptional client outcomes.

· Business Development: Acumen for identifying and capturing new opportunities and expanding market presence.

· Team Building: Skilled in recruiting, mentoring, and fostering a collaborative work environment.

· Design and Branding Knowledge: Solid understanding of design principles, marketing strategies, and branding trends.

· Public Speaking and Thought Leadership: Ability to represent the company through speaking engagements, publications, and awards.

· These concise requirements and skills highlight the qualifications and expertise needed for the role.

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

• Organising and managing project teams, including hiring contractors as needed to complete specific tasks
• Ensuring that all costs are within budget and working with team members to identify opportunities for cost savings
• Communicating with clients throughout teh project to ensure they are satisfied with progress and updates
• Developing and implementing project timelines, ensuring that deadlines are met and that tasks are completed on time
• Evaluating project risks and making recommendations for mitigation of identified risks
• Managing the day-to-day operations of projects to ensure they are completed on time and within budget
• Communicating within architects, engineers, contractors, subcontractors, suppliers and other parties involved in the project
• Ensuring that all project documentations is completed according to company standards and laws

• Tracking projects status and follow-up with team for the action items
• Incharge of project team timesheets and keep track of billing status
• Assist Project Manager in coordinating issued of sales and ourchase related documents (invocie）
• Responsible of general administration function
• Provide administrative support to teh account department
• Daily update in Goggle Spreadhseet
• Stock taking
• Administrative works about general workers
• Submission for project documents to related parties

• Understand teh project brief from designers/ clients
• Developed designs and concepts based on the clients' corporate identity
• Preparre construction, joinery and details drawings
• Prepare specifications for Furnitur, Finishes and Equipment's
• Technical Drawing (AutoCAD): Space Planning & Construction Drawing

• Work closely with the marketing team to develop static and motion graphics,animations and videos for a wide variety of marketing collaterals, from campaigns to assets for social media and websites
• Able to conceptualise, develop and execute interesting ideas for marketing projects
• Support Graphic Designer in the design adaptations of any marketing materials online and offline for multiple brands
• Assist in photo shoots and product styling
• Update and manage all digital platforms such as company website, social media accounts to ensure contents are relevant and up to date
• Develop content and visuals for required social media platforms and EDMs
• Source and design company branded merchanidises
• Support Marketing Team with ad-hoc projects and events
• Other ad-hoc duties as assigned

• Report on teh status of accounts payable and receivable
• Invoice preparationand follow-up, financial statement reconciliation
• Update internal accounting databases and spreadsheets
• Responsible for management and budgeting of cash flows
• Review effectiveness of internal controls with respect to paytment cycle
• Updating of cashbook and timely posting to the General Ledger
• Assist in the monthly closing of accounts including preparation of accounting journals and quarterly gst FILING
• Handle general office administration matters
• Assist in other ad-hoc projects as required

• Basic knowledge on Accounting (AP,AR)
• Check and verify suppliers' invoice before input into system
• Update of daily collection ledgers
• Maintain proper accounting records
• Assist in issuing sales invoice and official receipt
• Track vouchers and maintain voucher tracking list
• Any other ad-hoc duties as assigned

- Responsible for developing, implementing and managing marketing campaigns that promote the company services

- Enhanced brand awareness within the digital space as well as driving website traffic and acquiring leads/customers

- Collaborate with internal teams to design, develop and implement digital projects

- You will be involved in planning and implementation of Business Development plans

- Supervision of confirmed Digital advertising and media-related projects

- Create and execute project work plans and revise when appropriate to meet changing needs and requirements

- Identify resources needed and assign individual responsibilities to support individuals.

- Maintain contact and regularly update client and office on progress or development of assigned projects.

- Prepare for work-in-progress reviews and quality assurance procedures.

- Be proactively involved in providing the promised solutions to ensure clients' continued patronage.

- Write materials for advertising and marketing campaigns

- Prepare copy for high-engagement social media content

- Interpret creative direction and adapt points into concepts

REQUIREMENTS

· Candidate must possess at least Advanced/Higher/Graduate
Diploma, Bachelor's Degree in Marketing, Media, Advertising, Design or equivalent.

· At least 5 year(s) of working experience in a similar capacity is required for this position
· Can converse in English well

· Contract positions available
· Interested applicants must submit a comprehensive resume
stating expected salary and date of availability to [email protected]
· Regrettably, only shortlisted candidates

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.

Responsibilities for Interior Designer

• Determine scope of work
• Negotiate fees clients and vendors
• Set project schedules
• Research plans to ensure they are technically feasible
• Produce rough sketches and storyboards
• Use CAD software to develop detailed designs
• Select appropriate material for the design and budget
• Advise clients on project progress

Qualifications for Interior Designer

• Proficient in CAD
• Well versed in design and 3D awareness
• Mastery with visualizing concepts and explaining to others
• Experience in design consultancy
• Skilled at inspecting and surveying buildings
• Forward thinking in design concepts
• Willingness to travel to client sites
  

Key Responsibilities:

1. Creating Technical Drawings
2. Collaboration with Designer
3. 3D Modeling
4. Material and Furniture Specification
5. Building Codes and Regulations
6. Project CoordinatioRevisions and Updates

Skills Required:

• Proficiency in design software like AutoCAD, Revit, SketchUp, and Photoshop.
• Strong understanding of architectural drawing conventions.
• Knowledge of building codes, materials, and construction methods.
• Ability to interpret design concepts and translate them into accurate technical drawings.
• Attention to detail, strong organizational skills, and creativity.

Education & Qualifications:

• Education: Typically, a degree or diploma in Interior Design, Architecture, or a related field is required.
• Certifications: Some drafters may pursue certifications in specific drafting software (e.g., AutoCAD certification).
• Experience: Relevant experience, whether through internships or as a junior drafter, is often needed to advance in this role.