Job descriptions :

• Work on SoC/Subsystem define and integration.
• Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
• Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
• Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
• Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
• Post silicon Debug and support.

Job requirements:

• Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.
• Experience with ASIC design flow
• Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification
• Experience in video processing and video analytics is a plus
• Experience in USB/SDMMC/DDR IP is a plus.
• Experience in Functional Safety, automotive certification is a plus.
• Passionate and strong in general programming is a plus
• Good understanding of DFT
• Familiar with UNIX/ Linux environment and scripting
• Good communication and interpersonal skills
• Strong analytical and problem-solving skills
• Professional working with bilinguals in Mandarin is a plus

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Mentor a team of engineers in Basic design to carry out Hull form and General arrangement development, Hydrodynamic and stability calculations for a tender or ongoing projects.
• Assist in the development of new products.
• Support other in-house departments and external parties, where required, by providing specialist technical advice and information.
• To generate list of drawing/document specific to each project.
• Prepare technical specifications for equipment procurement (e.g. major deck equipment) and perform technical evaluation of vendor’s bid.
• Carry out naval architectural calculations, hydro dynamic analysis, stability calculations.
• Prepare and review layout arrangement in accordance with building specification, rules, and regulations (fire, watertight integrity, accommodation layouts…)
• Manage and check technical information of external suppliers of equipment and systems and coordinate/cooperate with engineers from other trades in the organization.
• To check and approve calculation/drawings and material list and ensure that they conform to contractual technical specifications, installation control documents, Classification and Statutory Rules/Regulations.
• Participate in tests and trials, where required.
• Liaise with ship owners and surveyors.
• Ensure that all design issues raised by owner, Class and Flag on drawings and documents are timely and properly captured in Action Item Register for follow-up actions.
• Keep abreast with current technological developments and products.
• Keep abreast with Classifications Rules, military and industrial standards relevant to design activities.

Requirements:

• Degree in Naval Architecture/ Marine Engineering or Structural Engineering from a recognized University
• Strong knowledge of international design codes, Classification/Statutory Rules, and Regulations.
• Possess Engineering Design and Project Management skills
• Strong Leadership and Interpersonal skills to manage assigned team members and other stakeholders
• Strong experience in Naval architecture, Structure, Outfitting, Accommodation design
• Proficiency in AutoCAD, Aveva Marine, NAPA, Microsoft office, Rhino 3D, CFD software knowledge
• High proficiency in 3D modeling skills using 3D CAD software will be an advantage.
• At least 10 years’ experience in engineering design in Marine/Offshore/Oil & Gas industry or Classifications Societies

Other Information:

• Location: 16 Benoi Road(Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Unique Opportunity

Embark on an ambitious journey with Thermo Fisher Scientific Inc., the world leader in serving science, as a Staff Engineer, Systems Design. Here, you will have the unparalleled chance to work on world-class projects that impact global health and safety. We strictly emphasize inclusion and collaboration, ensuring that every voice is heard and valued.

Key Responsibilities

• Lead the design and development of complex systems with flawless execution.
• Work collaboratively with multidisciplinary teams to determine project requirements and successfully implement solutions.
• Drive technological innovation by developing and testing new systems and components.
• Ensure all designs meet outstanding quality standards and align with industry regulations.
• Coordinate project timelines and deliverables, ensuring ambitious goals are met.
• Maintain detailed documentation of designs, tests, and processes for future reference.

Required Qualifications

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field, or equivalent experience.
• Proven track record with at least 10 years of experience in systems design engineering.
• Demonstrated architecture skills with models, views, and tools.
• Experience as an architect for multiple (multi-site) teams.
• Working in a multi-disciplinary environment.
• Experience with software development and instrument design.
• Knowledge of value stream mapping and reducing cross-team dependencies.
• Strong analytical skills to fix and resolve complex issues.
• Excellent verbal and written communication skills to effectively convey ideas and collaborate with team members.
• Demonstrated leadership abilities in managing projects and guiding team efforts.
• Relevant professional certifications in systems design or engineering.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

• Responsible for 3D product design and its requirements

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions

• Create proof of concepts

• Generate engineering drawing with proper GD&T and Tolerance Stack up

• Define test requirements needed for all the designed products

• Perform Patent search for possible design infringement

• Drive Projects with tight timeline

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/Bachelor Degree in Mechanical / Industrial Engineering

• 2-3 years of relevant experience

• Good exposure in Plastic Injection molded parts design

• Knowledge of product design, engineering plastics behavior, product certification

• Knowledge of CAE simulation will be an added advantage

• Competent in Engineering calculations

• Hands on 3D CAD & CAE experience

• Good problem-solving skills with strong technical acumen

• Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

BASK was started (in June 2020) with a single objective: to offer luxurious silk products at a revolutionary price.

We make ethically sourced silk bedding products, eye masks, and fashion hair accessories.

If you would like to play a part in introducing mulberry silk products to the younger generation so that they can witness its benefits for their hair and skin too, we want to hear from you.

For this role, we are seeking a highly motivated and creative intern in the field of graphic design, social media to assist in product design and daily content creation.

Content Creation:

• Curate creative ideas and generate engaging video content for different social media platforms.
• Create daily content including photos, videos, edits, and copywriting on our Tiktok, Instagram and other social media accounts
• Utilise your video editing skills to produce high-quality content that resonates with our target audience and drives engagement.
• Plan, curate, and execute the media calendar, ensuring timely and consistent content delivery across all platforms.

Graphic Design:

• Curate, research and develop concepts and layouts for our new products, packaging and marketing materials, websites, social media postings and other media collaterals.
• Assist in day-to-day administrative tasks and support for product listings creation, e-commerce storefront layout design update etc.

Ideal candidate should have:

• A good eye for design
• Attention to details
• Strong sense of responsibility and initiative
• Able to multi-task and work independently, as well as in a team
• Comfort working with Adobe Creative Suite, particularly Photoshop, InDesign, and Illustrator
• Reside in Singapore

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilites:

- To support the Creative & Marketing teams in developing effective creative collaterals for communication and marketing campaigns. Deliverables include Print, Social Media, Digital, video editing etc.

Requirement:

- Basic proficiency in adobe suite especially Illustrator and photoshop

- Strong creative and visual design skills with attention to detail.

- Familiarity with typography, color theory, and layout design principles.

- Good & positive attitude, willing to learn, punctual, proactive

- Able to work on a fast-paced environment

Location:

- Woodlands

Minimum commitment period of 3 months

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage