Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

Who We Are

The EDL Group is a leader in surfacing materials, serving architects and interior designers with cutting-edge solutions for stunning and functional spaces. Headquartered in Singapore, with a regional presence and over 200 employees worldwide, we pride ourselves on delivering innovative, design-led products that inspire creativity.

Job Description

We are looking for a Design Manager to spearhead our Graphic Design team and bring bold, innovative ideas to life.

Key Responsibilities

1. Strategic Planning:

• Collaborate with senior management to define the creative direction and align it with business goals.
• Develop and implement strategies to enhance the design team’s productivity and creativity.
• Ensure all creative outputs align with brand guidelines, company objectives, and marketing goals.

2. Internal collaboration:

• Work closely with internal stakeholders across departments to understand project goals and creative requirements.
• Act as the key point of contact for internal design needs, managing expectations and delivering high-quality results.

3. Concept Development & Execution:

• Drive brainstorming sessions to develop innovative ideas that meet internal objectives.
• Oversee the design process from concept to final delivery

4. Team Leadership:

• Lead, mentor, and inspire the graphic design team
• Provide constructive feedback and guidance to team members to elevate the quality of deliverables and foster professional growth.

Qualifications

• Proficiency in Adobe Creative Suite (Illustrator, Photoshop, After Effects, Premiere Pro, etc.) and other design tools.
• Experience in Print, Motion Graphics, and Digital Design (websites, social media, animations, videos).
• A strong portfolio showcasing a variety of projects, including print, motion, and digital designs
• Strong communication skills
• Capable of working independently and managing multiple projects and deadlines.
• A proactive mindset, passion for design, and eagerness to learn new skills.

Preferred Skills

• Expertise in typography, 3D design, or advanced motion graphics.
• Understanding of UX/UI design principles for digital projects.

What We Offer

• A dynamic and creative work environment.
• Opportunities for growth and development.
• The chance to lead and shape impactful projects

Job Responsibilities

• To respond, follow up and complete design requests on time.
• To understand project requirements and produce designs for proposals and tenders, collaborating with Sales and Operations Teams to clinch projects.
• To take on special customized projects whenever required
• To ensure information are properly handed over to Sales and Operations Teams, in accordance to client’s requirements and ensuring all installation compliance
• To visit Clients with Sales/Operations team for presentations, networking etc.
• To assist Design Manager to perform any other related projects and duties as required.

Job Requirements

• Degree in Architecture or equivalent
• Preferably 2 years of working experience in design, landscape, architecture, or any related field
• Software Skill(s): Revit, Autocad, Lumion, Sketchup, Photoshop, 3Ds Max.
• Creative and has technical knowledge in basic construction design
• Able to create design concept and narrative for Design Proposals

JOB DESCRIPTION

· Work on SoC architecture discussion and optimization with architect; SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Work on SoC floorplan with architect and APR; SoC power check; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

About Us:
At Luxx Newhouse Group, we specialize in providing premium engineered surfaces, including sintered stones, solid surfaces, and quartz. Our commitment to excellence is reflected in our end-to-end solutions—from supply to fabrication and installation. We are a dynamic and innovative company looking to expand our team with creative minds who thrive in a fast-paced environment.

Position Overview:
We are seeking a talented and passionate Product Design & Visualisation Intern to join our team. As an intern, you will collaborate with our product design and visualisation teams to create compelling and high-quality designs that showcase our engineered surfaces. This is an excellent opportunity for someone looking to gain hands-on experience in design and 3D visualisation in a cutting-edge industry.

Key Responsibilities:

• Assist in the design and development of product concepts and visual presentations for our engineered surfaces.
• Create 3D visualisations, renderings, and prototypes using CAD software (e.g., AutoCAD, SolidWorks, Blender).
• Collaborate with the design team to refine product concepts, ensuring they align with brand standards and client requirements.
• Support the creation of marketing materials, presentations, and product brochures.
• Work on client-specific customisation projects and provide design solutions that reflect their vision.
• Assist in the preparation of mood boards, sketches, and material mock-ups for presentations and client meetings.
• Participate in product brainstorming and ideation sessions.

Qualifications:

• Currently pursuing a degree in Industrial Design, Product Design, Architecture, or a related field.
• Proficiency in 3D modelling and visualisation software (AutoCAD, Rhino, Adobe Illustrator, Adobe Photoshop, Keyshot, etc.).
• Basic understanding of design principles, material properties, and manufacturing processes.
• Strong attention to detail and a creative problem-solving approach.
• Ability to work independently and as part of a collaborative team.
• Excellent communication and time management skills.
• A portfolio showcasing relevant design work will be highly regarded.

Duration:
3-6 months (with potential for full-time employment after successful completion)

Why Join Us?

• Gain hands-on experience with cutting-edge materials and product design.
• Work in a collaborative and innovative environment.
• Opportunity to learn from industry experts and make an impact on real-world projects.

If you're ready to immerse yourself in the world of premium product design and visualisation, we'd love to hear from you!

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Roles & Responsibilities

• To work as the Design Engineer to our LTA projects.
• To review of contractor’s Design and Construction submission and comment.
• To assist the SDE in the review of design submissions.
• To attend design meeting and all other relevant meetings as and when required.
• To give suggestion in construction sequence based on the design reviews.
• To follow PGI on rotational basis with the SDE.
• To review Shop Drawings and comment if any.
• To prepare Independent Design Reports.
• To visit site and review compliance with design requirements.

Requirements

• At least five (5) years of relevant experience on projects similar in nature to the Works in the Civil Contract.
• At least five (5) years in the design of structural and/or geotechnical works for deep excavation projects of a similar size and complexity.
• Experience in working in a structural engineering team within a large multi discipline project team.
• Experience in minimum facility platform design and including the substructure, topsides and bridges.
• Ability to meet agreed deadlines.
• Possess excellent interpersonal skills and ability to work as part of team.
• Familiarity of Singapore local codes & standards.

Interested applicants are invited to submit your updated resume, stating current/expected salaries to: [email protected]

We regret to inform that only short-listed candidates will be notified.

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Attend Customer Enquiry
• Provide Consultation
• Handling Renovation Projects

Training will be provided

Requirements:

• Passionate in Interior Design
• Pleasant & positive working attitude
• Strong in negotiation & presentation skills

Training will be provided

Job Highlights:

• On-Job Training
• Flexible working hour
• Attractive Incentives

We do accepts applicants with NO relevant experience as well. This position offers room for growth as well as potential career growth opportunities for all passionate candidates!

Rules & Responsibilities

We are seeking a dynamic FIELD SUPERVISOR ( MA KET RESEARCH) with strong leadership abilities to join our team. We are a company with a commitment to innovation and excellence. If you're a creative and strategic marketer with a passion for driving results and the ability to inspire and lead a team, we want to hear from you. Candidates are required to be experienced in marketing for the Construction Sector with good existing network and contacts.

Job Description:

* Strong marketing & presentation preparations skillets.

* Build strong client relationships to maintain old business and acquire new customers in local market

* Maintain regular communication with clients to ensure that all of their needs are understood and addressed.

* Collaborate with various internal departments and consultants to ensure that they fulfill

Customers requests and focus on improving the customers’ experience.

* Resolve complaints and keep track of all processes that pertain to the client’s desires.

*Build and strengthen the relationship with consultants, contractors and developers.

* Collect and analyze data concerning consumer behavior to understand changing needs.

* Prepare quotations, tender compliances and marketing proposals.

* Other ad-hoc duties as assigned.

Compulsory Job Responsibility & Requirements:

1) Master's degree in marketing, Sociology, business, or related field.

2) Mandatory working day Monday to Saturday 9am to 9pm (3 hours over time)

3) At least 4 years related experience in Singapore building construction marketing site

.4) Must be work on weekends or public holidays for essential job

5) Someone willing to take hardship job

6) Knowledge of our industry and target audience is a plus.

7) Creative thinking and problem-solving abilities.

8) Proven experience in marketing roles, including leadership or marketing operations manager.

9) Budget planning and management skills.

10) Strong strategic thinking, communication, and leadership skil

11) Proficiency in digital marketing channels and tools

12) Excellent organizational skills and attention to detail. 13) Able to build and maintain good rapport with all internal and external stake holders including clients, consultants, contractors, developers and team members.

14) Experience and equipped with strong international contact bases e.g. Developers, Consultants, Contractors.

15) Excellent negotiation, communication and presentation skills.

See how you compare with other applican

Rules & Responsibilities

We are seeking a dynamic FIELD SUPERVISOR ( MA KET RESEARCH) with strong leadership abilities to join our team. We are a company with a commitment to innovation and excellence. If you're a creative and strategic marketer with a passion for driving results and the ability to inspire and lead a team, we want to hear from you. Candidates are required to be experienced in marketing for the Construction Sector with good existing network and contacts.

Job Description:

* Strong marketing & presentation preparations skillets.

* Build strong client relationships to maintain old business and acquire new customers in local market

* Maintain regular communication with clients to ensure that all of their needs are understood and addressed.

* Collaborate with various internal departments and consultants to ensure that they fulfill

Customers requests and focus on improving the customers’ experience.

* Resolve complaints and keep track of all processes that pertain to the client’s desires.

*Build and strengthen the relationship with consultants, contractors and developers.

* Collect and analyze data concerning consumer behavior to understand changing needs.

* Prepare quotations, tender compliances and marketing proposals.

* Other ad-hoc duties as assigned.

Compulsory Job Responsibility & Requirements:

1) Master's degree in marketing, Sociology, business, or related field.

2) Mandatory working day Monday to Saturday 9am to 9pm (3 hours over time)

3) At least 4 years related experience in Singapore building construction marketing site

.4) Must be work on weekends or public holidays for essential job

5) Someone willing to take hardship job

6) Knowledge of our industry and target audience is a plus.

7) Creative thinking and problem-solving abilities.

8) Proven experience in marketing roles, including leadership or marketing operations manager.

9) Budget planning and management skills.

10) Strong strategic thinking, communication, and leadership skil

11) Proficiency in digital marketing channels and tools

12) Excellent organizational skills and attention to detail. 13) Able to build and maintain good rapport with all internal and external stake holders including clients, consultants, contractors, developers and team members.

14) Experience and equipped with strong international contact bases e.g. Developers, Consultants, Contractors.

15) Excellent negotiation, communication and presentation skills.

See how you compare with other applican

Job Qualifications:

• Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)
• Ability to lift heavy materials and equipment
• Willingness to work overtime
• Willing to work midnight shift
• Excellent customer service skills
• Min 3 Years relevant working experiences
• Secondary School / high school / diploma or equivalent
• Carpentry and renovation experience a plus

Job Responsibilities:

• Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools
• Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels
• Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise
• Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results
• Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly
• Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms
• Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go

Roles & Responsibilities

• Bricklaying
• Apply waterproofing
• Installation of panel
• Plastering and skimming
• Preparing construction sites, materials, and tools.
• Loading and unloading of materials, tools, and equipment.
• Removing debris, garbage, and dangerous materials from sites.
• Assembling and breaking down barricades, temporary structures, and scaffolding

Job overview

Graphic designers use their creativity, technical skills, and design expertise to craft compelling visual concepts that resonate with a target audience. They specialize in creating visual designs for marketing materials, social media, websites, and product packaging. Collaborating with team members, including copywriters and marketing teams, graphic designers ensure that all materials align with brand guidelines and effectively communicate the intended message.

This role requires proficiency in design software such as Photoshop, InDesign, and Adobe Creative Suite, along with a strong understanding of design principles, typography, and color theory. With excellent communication skills and adaptability, graphic designers play a vital role in meeting deadlines and exceeding project goals.

Key responsibilities

Design marketing materials. Create graphics for social media, product packaging, websites, and advertisements that align with brand identity.

Collaborate with team members. Work closely with copywriters, creative directors, and marketing teams to ensure cohesive visual concepts.

Utilize graphic design software. Develop designs using tools like Photoshop, InDesign, and Adobe Creative Suite.

Incorporate typography and color theory. Use fonts, design principles, and color schemes to enhance the appeal of marketing materials.

Maintain brand guidelines. Ensure consistency across all visual designs to build a strong brand identity.

Develop visual concepts. Brainstorm and execute ideas that align with the company’s goals and target audience.

Adapt designs for various mediums. Tailor visuals for digital platforms, print, and multimedia projects.

Meet deadlines. Manage time effectively to deliver high-quality designs on schedule.

Stay updated on design trends. Research industry trends to integrate modern and innovative styles into projects.

Qualifications and skills

Education. A bachelor’s degree in graphic design, fine arts, or a related field.

Experience. Demonstrated expertise through a strong portfolio with high-quality designs.

Technical proficiency. Skilled in design software, including Photoshop, InDesign, and Adobe Creative Suite.

Communication skills. Ability to clearly articulate ideas and collaborate with stakeholders and team members.

Graphic design skills. Proficiency in typography, color theory, and design principles to create impactful visuals.

Time management skills. Efficiently manage multiple projects and meet deadlines in a fast-paced environment.

Adaptability. Flexibility to adjust designs based on feedback and evolving project requirements.

Problem-solving skills. Creative ability to overcome design challenges and deliver effective solutions.

Knowledge of design trends. Awareness of industry trends and the ability to integrate them into projects.

Are you a talent looking to build business skills, gain experience, and take on exciting challenges?

Grow your career with Trelleborg and start shaping the industry from the inside.

About the Job

Trelleborg Singapore is looking for an excellent Design Engineer to join the Research and Development team. Reporting to the Engineering Director, you will be responsible to finish the design, modelling & drafting work allocated to you by your seniors in an efficient and timely manner. This job will entail completion of 3D models and engineering drawings, maintaining work documentation and keeping all projects organized. The duties and responsibilities of the Design Engineer is not limited to those listed below and are subject to change as per needs of the business.

• Provide engineered design & engineering to clients from conceptual design till award of the project.
• Efficiency run and maintain innovative finite element analysis tools within Trelleborg Group and its associated companies.
• Innovative and creative to promote and launch new product line to increase market share and profitability.
• Key collaboration with Sales & Marketing, Procurement, Technical, Production and customers to achieve agreement and clarification for new product design specifications. Implement work in accordance with applicable project procedures and standards.
• Establishment of the design work requirements for submission. The design work are drawings, engineering data sheets, design & engineering specification solution documents.
• Review design work together with the FEED design consultants/engineers and ensure that in order for submission.
• Attend engineering clarification meetings as and when required and also assist QA/QC to address engineering issues and establish method statements. Oversee new products' testing, new testing standard & procedure preparation and analyse results.
• Able to attend short overseas assignments when required.

About the Ideal Candidate

• Ideally a bachelor’s degree in Engineering or equivalent; minimum 2 years’ experience in engineering design
• Proven excellent skill in usage of CAD Solidworks and FEA Abaqus
• Have a good understanding of product realization process from development to production
• Strong Project Management skills
• An excellent teammate able to work well with all levels of people across various regions and cultures
• Good problem solving and interpersonal skills
• Good time management, proactive and able to work effectively in a fast-paced environment
• Ideally has knowledge and experience in the maritime, infrastructure, engineering or manufacturing environments but if no formal professional exposure, the candidate must demonstrate a keen interest in learning and acquiring the relevant industry knowledge to build compelling content
• Strong project and vendor leadership skills
• Possesses high level of integrity with good work ethics

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees.

Don’t delay, apply today by submitting your CV along with your expected salary and notice period!

At Trelleborg our people are #shapingindustryfromtheinside