Job Description: We are seeking a highly motivated and talented Research Fellow to join our interdisciplinary research team. The successful candidate will conduct cutting-edge theoretical and computational research in the following areas:

Research Areas:

1. Electromagnetism and Plasmonics: Theory and computational modeling of electromagnetism in complex media, plasmonic systems, and metamaterials, with a particular focus on cavity quantum electrodynamics (QED) and interactions between light and matter at the nanoscale.
2. Inverse Design in Nanophotonics and Quantum Nanophotonics: Application of inverse design techniques to optimize and design novel photonic structures and devices, including metasurfaces, photonic crystals, and quantum nanophotonic systems.
3. Plasma and Magnetohydrodynamics (MHD) Modeling: Development and application of advanced plasma modeling tools, such as particle-in-cell (PIC) simulations and magnetohydrodynamics (MHD), to study their interaction with plasmonic or excitonic systems.
4. Novel Optoelectronic Effects: Investigation of new optoelectronic phenomena in low-dimensional materials (e.g., 2D materials, nanowires, and quantum dots) and time crystals, focusing on their potential applications in next-generation devices.
5. Non-Hermitian and Topological Photonics: Study of non-Hermitian systems and topological photonics, including the exploration of novel phenomena such as exceptional points, edge states, and robust modes in photonic systems.

Key Responsibilities:

• Develop and implement theoretical models to describe complex physical systems in the research areas mentioned above.
• Conduct large-scale numerical simulations to study the behavior of plasmonic, nanophotonic, and optoelectronic systems.
• Analyze and interpret simulation results, developing insights into novel physical phenomena.
• Collaborate closely with experimental researchers, providing theoretical guidance and feedback on ongoing experimental work.
• Publish research findings in high-impact, peer-reviewed journals.
• Present research results at internal seminars, conferences, and workshops.
• Contribute to the development of computational tools and code libraries for the group's research.

Qualifications and Skills:

• Required:
  • A Ph.D. in Physics, Applied Physics, Engineering, Applied Mathematics, or a closely related field.
  • Strong background in electromagnetism, quantum mechanics, solid-state physics, and material sciences.
  • Solid experience in computational physics, with proficiency in numerical simulation techniques such as finite-difference-time-domain (FDTD), finite-element method (FEM), particle-in-cell (PIC) simulations, and magnetohydrodynamics (MHD).
  • Ability to develop and modify simulation codes to model complex, multi-physics systems.
  • Strong analytical and problem-solving skills, with the ability to derive and solve equations analytically or numerically.
  • Excellent written and verbal communication skills, with a demonstrated ability to write high-quality research papers and present complex ideas clearly.

Preferred:

• A strong publication record in top-tier journals in related fields.
• Experience with advanced simulation software (e.g., COMSOL, Lumerical, CST, or similar platforms).
• Familiarity with machine learning or artificial intelligence techniques for inverse design and optimization in nanophotonics is a plus.
• Ability to work independently and as part of an interdisciplinary team.
• Demonstrated creativity and innovation in solving complex theoretical and computational problems.
• Experience in collaborative research with experimentalists or other research groups is highly desirable.

Eligibility:

• Ph.D. holders with a relevant background in theoretical/computational physics, engineering, or applied mathematics are encouraged to apply.

Rainbow Lapis @ Heartland Mall is hiring Part-time Retail Assistants (Cashier).

Job Description

• Attend to the store sales and daily routine operations.
• Organise the display and assist in housekeeping duties.
• Have a passion to promote heritage food products.
• Perform cashiering duties.
• Operate POS, Grab orders, and other payments.
• Provide attentive and friendly customer service.
• Ensuring cleanliness and hygiene of stores.
• Handle products with care.

Requirements

• Some retail experience preferred.
• Possess good communication and interpersonal skills.
• Able to understand English (most of our documents are in English).
• Able to manage POS and other cashiering related equipment.
• Service oriented.
• Possess Food hygiene certificate (if possible)

Working hours

• Part-time position
• 5 days work per week.
• Able to work on weekends and public holidays.
• Working hours: 10.00am to 8.00 pm (weekday) / 10.00am to 9.00 pm (weekend)

Salary: $9.00 per hour (Weekday) / $10 per hour (Weekend)

Working Location

Rainbow Lapis @ Heartland Mall

205 Hougang Street 21, #02-48, Singapore 530205

Interested applicants, please apply with your latest resume or contact us at 62805781 during office hours (Monday to Friday).

Job Description

• Industry/ Organization Type: Interior Design Firm (Commercial & Residential)
• Position Title: Sales Consultant / Sales Interior Designer
• Working Location: East – Ubi
• Working Hours: 5.5 days (Mon-Fri: 12pm-6pm, every Sat: flexible)
• Salary Package: Full comm (Up to 60%) / Basic Salary SGD 2000 + Comm (Up to 15%) + Attractive Monthly Incentive
• Duration: Permanent

Key Responsibilities

• Generating sales for renovation projects with provided verified leads
• Assisting in space planning and providing design recommendations
• Creating customized quotations tailored to client needs
• Overseeing renovation projects, including conducting site visits and managing coordination
• Scheduling project timelines to align with the client’s move-in dates
• Collaborating with subcontractors and suppliers to ensure smooth project execution
• Conducting on-site visits during the renovation process
• Responding swiftly and professionally to client communications via email and phone calls

APPLY NOW!!!

• Min. ITE
• Min. 2 years of working experience in related field
• Sales expertise from other industries is welcome

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70214 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Key Responsibilities

• Handle Customer Inquiries: Respond to customer queries via phone, email, or Whatapps chat regarding products, pricing, delivery and quality.
• Resolve Customer Complaints: Address and resolve customer complaints related to food quality, safety or delivery issues.
• Process Customer Orders: Assist with processing customer orders, including managing inventory, tracking shipments, and resolving order discrepancies.
• Provide Product Information: Offer information and support to customers about food products, ingredients, allergens and nutritional content.
• Collaborate with Production and Logistics Teams: Work closely with production and logistics teams to resolve customer issues related to product availability, delivery or quality.

Secondary Responsbilities

• Maintain Customer Records: Update customer records and databases with accurate information, including contact details, order history, and preferences.
• Participate in Quality Assuance: Participate in quality assurance activities, such as product testing, to ensure customer satisfaction and regulatory compliance.
• Support New Product Launches: Assist with launching new food products, incuding providing customer support, training, and product information.
• Monitor Customer Feedback: Analyze customer feedback and complaints to identify trends and areas for improvement.

Requirements

• Food Safety Knowledge: Familiarity with food safety regulations, such as HACCP, GMP, allergen management.
• Customer Service Skills: Excellent communication and problem-solving skills to provide exceptional customer service.
• Product Knowledge: Familarity with food products, ingredients, and nutritional content.
• Time Management: Ability to prioritize tasks, manage multiple customer inquiries, and meet deadlines.
• Teamwork: Ability to collaborate with production, logistics, and quality assurance teams to resolve customer issues.

Working Hours and Environment

• Working Hours: Typical office hours, with occasional overtime to support peak production periods or customer inquiries.
• Work Environment: Office environment, with occasional visits to production facilities or warehouses.

Interested applicants, please apply with your updated latest resume, stating your current and expected salary.

Singaporeans/Singapore PR and Malaysians are most welcome to apply.

Sembawang Confectionery is a traditional cake shop. Committed to bringing our customers freshly baked bread with a traditional taste.

The company is urgently hiring for Retail Assistants (Cashier)

Job Description

• Attend to the store sales and daily routine operations.
• Organise the display and assist in housekeeping duties.
• Have a passion to promote heritage food products.
• Perform cashiering duties.
• Operate POS, Grab orders, and other payments.
• Provide attentive and friendly customer service.
• Ensuring cleanliness and hygiene of stores.
• Handle products with care.

Requirements

• Some retail experience preferred.
• Possess good communication and interpersonal skills.
• Able to understand English (most of our documents are in English).
• Able to manage POS and other cashiering related equipment.
• Service oriented.
• Possess Food hygiene certificate (if possible)

Working hours

• Full-time / Part-time position
• 5 or 6 days work per week

Work Location

Sembawang Confectionery (opposite Golden Mile Complex)

Blk 6 Beach Road, #01-4869, Singapore 190006

Interested applicants, please apply with your latest resume stating your expected salary and current salary.

You should be comfortable handling all types of cameras. You should also be able to work on fast edits.

Responsibilities:

• Good technical skills and cinematic nuances to achieve the creative vision of the director and director of photography.
• Be on the set, whether it’s in a studio or on location, and setup the camera or cameras that will be used to the greatest effect on specific scenes.
• Be familiar with setting up drone, gimbal, dolly, cranes, wireless transmission.
• Be familiar with sound recording and/or setup of sound recording equipment
• Be well -acquainted with the script or shooting brief, meticulously plan and practice each and every camera move.
• Able to edit with fast turnaround
• Able to work on some weekends and evenings. (Pre arranged)
• Able to travel when required.

Qualifications:

• Relevant industry and professional experience
• Knowledge of sound set-up and sound recording equipment an advantage
• Please include your portfolio in the job application.
• Editing Skills

About Us

EVOLV Communications is in the serious but fun business of changing attitudes through myriad communication means. The work is serious. The people? Always fun to work with.

THE ROLE:

AMD is seeking a talented, motivated and self-driven digital design engineer to be part of the SerDes Technology group. You will be part of the team developing SerDes/Transceiver designs and solutions. The role involves work on all aspects of the FPGA/ASIC digital design flow including architectural specification, test planning, RTL design, functional verification, through synthesis and implementation to hardware and post silicon validation.

THE PERSON:

The successful candidate will execute design work and contribute technically with a high general impact on the overall design. We are seeking someone who is innovative, highly accurate and detail-oriented, possessing good communication and problem-solving skills to join our design team.

KEY RESPONSIBLITIES:

• Design and development with leading edge technology nodes on digital logic blocks.
• DFT implementation and verification.
• Perform test bench development and functional verification of developed digital logic blocks.
• Perform post silicon validation, testing and debug of block functionality on prototype silicon.
• Work closely with system architect, project manager, design and verification teams to develop design specifications documents, verification plans, and validation test plans.

PREFERRED EXPERIENCE:

• Experience in ASIC/digital IC development with completion of several complex ASIC or IC tapeouts.
• Working experience of RTL coding in Verilog/VHDL language, verification, logic synthesis and DFT in high performance design.
• Experience in test planning/creation/analysis of post silicon validation.
• Excellent verbal and written communication skills. Strong interpersonal skills.
• Problem solving and debugging skills.
• Knowledge of UVM and SystemVerilog language

ACADEMIC CREDENTIALS:

• Bachelor or Masters Degree in Electronic Engineering, and minimum 10 years relevant work experience.

LOCATION:

Singapore

As a full-edged consultancy firm, 3PA Pte Ltd has been involved in a diverse range of projects embracing the full spectrum of architectural services. These include architectural design and feasibility studies, masterplanning, interior design and project management. Its comprehensive portfolio includes commercial, residential, institutional, industrial, civic, transport, religious, mixed-use developments, conservation, as well as interior & urban design.

Qualifications

• Registered Architect with Board of Architects Singapore.
• At least 5 years of relevant experience.

Job Description & Requirements

• Collaborate with Project Directors on all areas of the architectural consultancy process including design, preparation of presentation materials, design documentation, project management and project administration.
• Liaise and coordinate with clients, consultants and contractors.
• Oversee progress of on-site works and resolve any arising issues.
• Ensure design quality and authority compliance.
• Conversant with local building codes and regulations.
• Well versed in design software such as Autocad, Sketchup, Photoshop.

Senior Software Design Engineer

Job Info:

• Salary: $ 5,000 - $ 7,000 with AWS + VB + PB
• Benefits: Medical and Dental Claim
• Working Day: Monday - Friday
• Working Time: 8.30am - 5.30pm
• Location: Ang Mo Kio

Job Responsibilities

• Design and develop software for automated semiconductor process equipment.
• Enhance equipment performance through Continuous Improvement Programs (CIPs) and other development initiatives.
• Provide field support to upgrade systems and resolve customer issues.

Job Requirements:

• Minimum Degree in Electrical & Electronics Engineering, Computer Studies, or a related field.
• At least 3-5 years of experience in programming in a Windows (XP and above) environment.
• Proficiency in C++, VC++, MFC, SQL, and Object-Oriented Programming (OOP).
• Solid experience in developing multi-threaded control software and familiarity with SEMI SECS/GEM equipment connectivity standards and the Software Development Life Cycle.
• Hardware experience with Servo, Stepper Motion Controller, Analog Devices, and High-Speed I/O.
• Knowledge of PLC is an added advantage.
• Strong analytical and problem-solving skills.

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements
• Manage multiple projects concurrently from design stage to project completion
• Drive continuous improvement for architectural services by reviewing current workflow practices together with management
• Establish good working relationships with different parties to promote continued partnerships
• Support the procurement of new business
• Mentor and supervise the training and development of the team

Requirements:

• 5 to 10 years' relevant experience as project architect
• Possess a Degree in Architecture or accreditation with Professional Bodies of equivalent standing such as the Board of Architects (BOA)
• Experience in AutoCAD, Revit, Lumion, Sketchup, Photoshop, Enscape
• Experience in delivering projects from concept to completion of construction
• Experience in private and public residential project in Singapore will be an advantage

Other information:

• Central, Singapore
• Mondays to Fridays, 9am-6pm

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

The Opportunity:

• Our Client, Government-Operated Management
• Location: Changi
• Basic Salary: Up to $3,800
• Working hours: Monday – Friday, 8.30am – 6pm

Job Responsibilities:

• Collaborate with consultants, contractors, and stakeholders to ensure smooth project execution.
• Attend project and site meetings, providing regular updates and reports.
• Monitor project timelines and oversee the progress of consultants and contractors.
• Ensure compliance by liaising with building management for necessary approvals.
• Prepare and deliver presentations and project-related documentation.
• Ad-hoc night work and on-site presence during construction phases.
• Prepare contract documents and review materials.

Job Requirements:

• Proficiency in AutoCAD is a plus!
• Proven experience in project coordination or management
• Strong communication and stakeholder management skills
• Ability to monitor timelines and manage multiple tasks effectively
• Knowledge of building management processes and compliance
• Willingness to work night shifts and visit construction sites as required
• Experience with contract preparation and project documentation

Next Step:

• Prepare your updated resume and click to apply!
• All shortlisted candidates will be contacted.

Jason Ng
Direct Line: 6697 7967
EA License No: 91C2918
Personnel Registration Number: R23113333

Company Background:

GWS Living Art is a team of urban green technology specialists based in Singapore. We specialize in turnkey development and implementation of nature-based solutions, including Green Wall systems and Green Roofs. Our mission is to address environmental challenges through innovation and provide sustainable solutions for a better world.

We are looking for a passionate and hardworking Landscape and Maintenance Worker to join our team and help maintain our innovative green projects.

Job Description:

• Perform routine maintenance and care for landscaped areas to ensure their health and visual appeal.
• Conduct planting, pruning, watering, fertilizing, and pest management for plants.
• Ensure cleanliness and upkeep of all landscaped areas and green systems on-site.
• Conduct inspections to identify any maintenance needs and report them to the supervisor.
• Work with the team to ensure timely project delivery and consistent quality standards.
• Safely operate landscaping tools, equipment, and machinery as required.
• Adhere to workplace safety regulations and guidelines during all operations.
• Assist with any other ad hoc tasks as directed by the supervisor or project manager.

Job Requirements:

• Comfortable working outdoors and under the sun in varying weather conditionsands.
• Physically fit and comfortable with manual work, including working at heights when required
• Basic knowledge of plant care and landscaping tools is preferred.
• Positive work attitude, reliable, and able to work as part of a team.
• Willingness to learn and adapt to new tools and systems related to green technologies.
• Open to candidates with no prior experience but a strong interest in landscaping and sustainability.

• We seek out for a researcher with a PhD in Physics or similar. In particular the candidate is expected to have a strong back ground in many-body quantum physics with extensive experience in tensor networks and neural network quantum states.
• The researcher will work on developing the numerical approaches and apply them to areas such as quantum thermodynamics, many-body quantum systems out of equilibrium and biology.
• High competence in parallel programming and GPU programming is preferred.

Must have experience in MEP drawing in M&E industry

- Responsible for creating, updating and revising BIM Models throughout the project life cycle

- Create and update BIM Models based on contract drawings and latest information

- To create BIM models and build the BIM libraries

- Collaborate and coordinate internally or/and externally with other disciplines design-changes and model changes;

- To produce construction drawings and shop drawings using AutoCAD and BIM tools.

- Develop plan, elevation, section and detail drawings from the BIM/CAD with adequate detail

- Ability to work individually and as part of a team to meet deadlines

• Designing of refrigeration, heating, ventilation and air-conditioning (RHVAC) system, site project survey, inspection and cost estimation, preparation of materials listing, drawings, installation, testing and commissioning.
• Closely work and liaise with the Commercial & Sales Department and the Operation Department on projects that require the involvement of both these departments.
• Preparation of quotations for RHVAC projects.
• Provide technical support to the field works that include but not limited to the air-conditioning, ventilation, heating, electrical and automation system, mechanical and general:-

A) Technical survey and inspection, survey report writing, materials listing, equipment selection, quantification and identification.

B) Technical support to field work coordination.

• Heat load calculation and air duct system design.
• Project coordination between worksite, office, clients and suppliers.
• Any other duties assigned by the Management as and when necessary.

Requirements

• Tertiary education in engineering discipline
• At least 2 years’ working experience in RHVAC systems preferrably in marine industry
• Has in-depth knowledge of refrigeration cycle theory, line components, circuit flushing, refrigerant recovery, pressure testing and vacuuming
• Good written and verbal communication and coaching skills

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Our group is seeking a highly motivated Research Fellow with expertise in Additive Manufacturing processes to join our dynamic team. The ideal candidate should hold a Doctoral Degree in Mechanical Engineering or a related field and possess extensive hands-on experience in a variety of additive manufacturing techniques, including Fused Deposition Modeling (FDM), Direct Ink Writing (DIW), Digital Light Processing (DLP), and software development for slicing and toolpath generation.

Key responsibilities include:

• Writing research proposals to secure funding and support ongoing initiatives.
• Driving research and development efforts for translational projects with a focus on industrial applications.
• Collaborating with a multidisciplinary team to innovate and optimize additive manufacturing techniques.
• Leading experiments, analyzing data, and publishing findings in high-impact journals.
• Providing mentorship and technical guidance to junior researchers and students.

The successful candidate will have a strong background in designing and implementing advanced manufacturing workflows, a track record of impactful research or industrial experience, and the ability to bridge the gap between theoretical innovation and practical application. A passion for innovation, excellent problem-solving skills, and the ability to work independently and as part of a collaborative team are essential.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

What will you do?

• Develop & Build Sequence of Operations for any First of Kind BMS Control system
• Develop BMS control logic using EcoStruxure Control Expert (formerly known as Unity Pro) for M580 HSBY PACs using Customer Design Standards, Derived Internal Data Type (DDT) Lists, standard library of Derived Function Block (DFBs), and Sequence of Operations (SOOs).
• Update DDT lists based on final SOO (Control Philosophy) and logic development.
• Design applications using the standard DFBs as building blocks using existing Customer applications as templates for the program structure.
• Attend internal and customer meetings to review programs and SOO documents.
• Collaborate and succeed within a diverse global team.
• Ensure adherence to Project Playbook (Client Guideline) and Version Control Processes Tune PID loops
• Understand and be able to explain data structures, logic structures, and DFBs developed for program wide use
• Use QA/QC tools and processes

What qualifications will make you successful?

• Bachelor Degree or equivalent in Electrical/Electronics Engineering or Computer Science
• Excellent verbal and written communication skills in English
• Experience designing, implementing, troubleshooting, and commissioning BMS system and/or PLC/Process Automation applications, especially with Schneider Electric products in Data Centres
• Experience writing industrial control applications
• Strong problem solving and detective skills
• Ability to work effectively alone and in a group setting, team oriented, self-motivated, and results driven
• Work according to specified project playbook and commissioning plan while being resourceful and versatile in finding sources of information to solve problems.
• Attention to detail and commitment to delivering high quality solutions
• Multi-task, handle conflicting priorities, and triage issues.
• Knowledgeable in computer programming languages (VB, C#, C++)
• Knowledgeable in computer networking architectures, topologies, and hardware
• Proficient in the use of Microsoft operating systems and software applications
• Experience with industry standard communication protocols such as Modbus, OPC, Modbus TCP/IP and Ethernet IP, BACnet Experience with integrating devices from multiple vendors into a packaged solution
• Advanced understanding of electrical circuits.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements
• Manage multiple projects concurrently from design stage to project completion
• Drive continuous improvement for architectural services by reviewing current workflow practices together with management
• Establish good working relationships with different parties to promote continued partnerships
• Support the procurement of new business
• Mentor and supervise the training and development of the team

Requirements:

• 5 to 10 years' relevant experience as project architect
• Possess a Degree in Architecture or accreditation with Professional Bodies of equivalent standing such as the Board of Architects (BOA)
• Experience in AutoCAD, Revit, Lumion, Sketchup, Photoshop, Enscape
• Experience in delivering projects from concept to completion of construction
• Experience in private and public residential project in Singapore will be an advantage

Other information:

• Central, Singapore
• Mondays to Fridays, 9am-6pm

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

About Us

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Creation is the core of TikTok's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

About the Team

We are TikTok’s LIVE Gift Design Team, dedicated to bringing joy to millions of users and empowering creators to thrive. Through innovative designs—ranging from digital gifts and mini-games to playful IP characters—we transform live-streaming into interactive experiences that connect communities worldwide.

Our vision is simple: fun fuels community, creativity sparks opportunity. By merging art with technology, we unlock new ways for creators and users to engage meaningfully and grow together. Join us, and shape the future of live-streaming experiences with impact and purpose.

Responsibilities

1. Taking ownership of the creative concept, production, and launch of virtual gifts, primarily in the form of animations, for TikTok LIVE;

2. Analyze feedback from streamers and users on gift animations, using metrics like sales and retention to develop strategies that drive engagement and improve gift sales;

3. Research aesthetic preferences across different countries, leveraging cultural understanding to help the team achieve diverse styles and perspectives;

4. Bring creative ideas to the table by exploring valuable initiatives beyond virtual gift animations, including but not limited to short video production, physical collectibles, and special effects filters.

Qualifications

Minimum qualifications:

1. 3+ years of experience in digital content strategy, visual media, production, or related fields;

2. Strong aesthetic sense and experience managing the full production process of media projects, from concept to launch (e.g., films, games, commercials);

3. Hands-on experience with LIVE streaming, either as a streamer or a user, with a passion for the LIVE industry;

4. Ability to collaborate in a fast-paced, dynamic environment;

5. Proficiency with production tools, such as Adobe Creative Suite, Figma, Cinema 4D, Blender, etc.

Preferred qualifications:

1. Proven ability to independently manage full-scale video or media production;

2. Exceptional storytelling skills and an ability to connect with audiences through digital content;

3. Knowledge of physical product manufacturing, including production processes, materials, and cost management;

4. Familiarity with AI and emerging technologies and how they can enhance creative production;

5. Experience with research methodologies, data analysis, and interpreting user feedback to generate actionable insights;

6. Understanding of the virtual goods, digital products, or gaming industries.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Summary:

At Zeno Exhibition, we aim to create influential, creative, industry leading spatial experiences. Our mission is to deliver extraordinary experiences through simple, user-friendly services and best-in-class execution.

You, as the designer, would love to bring collaborative authentic experiences to life with imagination, creative flair and design innovation. You would be working on projects with a focus on the integration of technology into built structures, starting off with the conception of user journey and experience.

Role and Responsibilities:

• Come up with graphic designs through concept sketches based on client/project requirements and specifications
• Work with the design and sales team to design and conceptualise presentation deck templates to be in line with company marketing strategies
• Work with overall company branding/marketing team to deliver content in line with company strategies
• Conduct research on visual ideas/trends as well as trends in the industry
• Develop and execute ideas from the concept stage to printing
• Work closely with team members on the implementation of concepts and designs into project and overall concepts
• Oversee work from color proof/mock-up to final print and application
• Conduct on-site inspections to ensure that graphic designs adhere to specifications

Requirements:

• Only Singaporean and PR may apply
• Job Location: Singapore
• Minimum 1 year experience in any graphic design / visual comm
• Exhibition design (Preferred) / Interior design / Architecture / Spatial design
• Well versed in 3D modelling and rendering programs: Rhino 3D (preferred, grasshopper 3D will be a huge bonus), 3DS Max (preferred), Sketchup, Vray, Corona.
• Well versed in 2D layout and design programs: Adobe Creative Suite (required), AutoCAD, or other similar programs.
• Strong design, CAD, and drawing skills
• Effective verbal and written communication skills to work with both internal team and clients
• Project management skills to effectively manage design, with the possibility of handling actual build on site
• Attention to detail and excellent time and organisational skills

⁠Interested candidates please send your resume to [email protected]

For more information about Zeno Exhibition. Please visit: https://zenoexhibition.com/

Design Project Manager - Bringing Creativity to Life with Efficiency

We are seeking a passionate and experienced Design Project Manager to join our team and lead the successful execution of exciting design projects from inception to completion. You will be responsible for overseeing all aspects of the project, from understanding client needs to managing delivery within budget and timeframe.

A Day in the Life:

• Client Relationship Management:

1. Collaborate with clients to clearly define their design aspirations and translate them into a formal design brief.
2. Facilitate seamless communication between the client and internal design team, ensuring client expectations are met and exceeded.
3. Proactively manage client expectations and navigate through any changes or challenges efficiently.

• Project Planning & Execution:

1. Develop comprehensive project plans using MS Project or similar project management software, outlining key milestones, timelines, and resource allocation.
2. Conduct regular meetings with client and internal teams to ensure clear communication, address design queries, and maintain project momentum.
3. Coordinate effectively with internal designers, landlords, architects, engineers, and other stakeholders involved in the project.

• Procurement & Tendering:

1. Identify and recommend qualified consultants to join the project team through a defined RFP process.
2. Assist the client in the tendering process, responding to technical queries, and clarifying project requirements.
3. Evaluate tender submissions, providing well-informed recommendations to the client for informed decision-making.

• Construction & Handover:

1. Facilitate regular stakeholder meetings throughout the construction phase, ensuring open communication and alignment.
2. Document meeting minutes for future reference and action tracking.
3. Manage client change requests, translating them into clear instructions for the project team.
4. Conduct regular site visits to monitor progress, oversee quality control, and address any logistical concerns.
5. Manage testing and commissioning procedures for project readiness.
6. Coordinate final inspections with landlord, consultants and contractors to ensure project compliance.
7. Prepare punch-lists and diligently follow up with contractors to rectify deficiencies.
8. Manage project close-out, including final accounts, handover documentation (as-built drawings, O&M manuals), and training sessions.
9. Oversee reinstatement and move management activities, ensuring a smooth transition to project completion.

What We Are Looking For:

• Minimum of 5 years of experience managing design projects in the Retail/Corporate industry. Junior candidates with demonstrably strong skills and relevant experience in design management may be considered.
• Proven track record of successfully delivering complex design projects on time and within budget.
• Excellent communication, interpersonal, and negotiation skills in both written and verbal formats.
• Strong organizational and time management abilities.
• Proven ability to prioritize tasks, manage multiple projects simultaneously, and adapt to changing circumstances while maintaining deadlines.
• Proficiency in design visualization software (e.g., AutoCAD, Revit), project management software (e.g., MS Project, Primavera), and communication tools (e.g., Microsoft Office Suite). Knowledge of BIM (Building Information Modelling) systems a plus.
• Experience with design procurement and tendering processes.
• Keen understanding of design constructability, able to identify potential constructability issues early in the design process and collaborate with designers to find solutions. Experience working with contractors and understanding how design decisions impact buildability and cost.
• Working knowledge of construction methods, materials, and regulations relevant to the industry. Ability to oversee construction activities, identify potential quality issues, and implement corrective actions promptly.
• PMP certification and/or LEED accreditation highly preferred. Demonstrates commitment to professional development and best practices in project management and sustainability.

Your Role

• Work closely with a team of BIM Modellers in the design and coordination works
• Responsible for preparing construction drawings including shop drawings submissions and approvals.
• Supervise work progress on site, and liaise closely with consultants, sub-contractors and operation team
• Involved in tendering work

The Requirements

• Degree in Architecture with minimum 3 years’ relevant experience with a main construction firm
• Be able to read and understand construction drawings
• Has project experience in buildings / hotels
• Be meticulous, highly motivated and independent with excellent team spirit and interpersonal skills

Key Responsibilities:

Simulator Design- develop AI chip Architecture Design- Using GEM5

Performance Optimization- working with AI software engineers to ensure computation algorithms, ensure circuit level

Front end code development

Job requirement

A Master or PhD in Electrical Engineering,Computer engineering related, with focus in chip design, hardware architecture, or AI systems is required

Proficiency in using simulation tools like GEM5, Synopsys, or similar platforms for simulating chip behavior and performance. o Strong understanding of AI algorithms and their hardware implementation, with hands-on experience in optimizing algorithms for AI tasks such as deep learning, machine learning, and neural networks.

//interested candidate may email your resume to [email protected] or apply here