To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

To assist Engineer in the drawings/documentation development and preparation.

To carry out drafting of building structures drawings.

Create visual guidelines for construction purposes.

Draft technical details.

Specify dimensions, materials, and procedures.

Edit technical draughts based on the recommendations of project engineers and architects.

Senior/Process Design Engineer (Wastewater Treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Job Description
As a Design Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

We are seeking an experienced Solution Architect (Microservices with React and .NET) to join our team. The ideal candidate will have a deep understanding of microservices architecture, with expertise in designing, developing, and deploying scalable and resilient systems. The primary focus will be on architecting a microservices-based solution with a React front-end and a .NET backend. This role requires a strong technical background, leadership skills, and the ability to work closely with crossfunctional teams.

Key Responsibilities:
• Architectural Design: Design and architect microservices-based systems that leverage React for the front-end and .NET for the backend. Ensure the architecture is scalable, secure, and meets the business requirements.
• Technology Strategy: Define and drive the technology roadmap for the microservices platform. Stay up to date with emerging technologies and best practices in the microservices, front-end, and back-end development ecosystem.
• System Integration: Design and oversee the integration of various services, ensuring seamless communication between microservices, and the front-end.
• Performance Optimization: Identify and address performance bottlenecks in the system. Optimize the architecture for speed, scalability, and reliability.
• Security: Implement security best practices across the architecture, ensuring data protection and compliance with relevant regulations.
• Technical Leadership: Provide technical guidance and mentorship to development teams. Review and approve design and code to ensure adherence to architectural standards
• Collaboration: Work closely with product managers, UX/UI designers, developers, and other stakeholders to translate business requirements into technical solutions.
• Documentation: Create and maintain comprehensive architectural documentation, including system designs, data flows, and deployment plans.
• Continuous Improvement: Advocate for and implement continuous improvement practices, including automated testing, continuous integration/continuous deployment (CI/CD), and DevOps methodologies.

What we are looking for
Required Qualifications:
• Education: Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Experience:
o Proven experience (7+ years) in software architecture, specifically in microservices architecture.
o Extensive experience with front-end technologies, particularly React.
o Deep expertise in .NET development and the ecosystem.
o Experience in cloud-based architecture (e.g., AWS, Azure, GCP) is a plus.

• Skills:
o Strong understanding of RESTful API design, GraphQL, and other integration patterns.
o Proficient in containerization technologies like Docker and orchestration tools like Kubernetes.
o Familiarity with database design and management, including SQL and NoSQL databases.
o Excellent problem-solving skills and ability to think strategically about technology.
o Strong communication skills with the ability to articulate complex technical concepts to non-technical stakeholders.
• Certifications: Relevant certifications in cloud architecture, microservices, or related fields are desirable.
• Preferred Qualifications:
• Experience with serverless architecture and event-driven systems.
• Knowledge of modern authentication and authorization protocols like OAuth, JWT, and OpenID Connect.
• Experience in leading large-scale enterprise projects

1. MAIN DUTIES AND RESPONBILITIES

a. Helping to build good customer relations and arranging staff meetings

b. Training and development and handling complaints and queries (from customers and staff)

c. Arranging promotional events and carrying out client satisfaction surveys and reviews.

d. Reviews the arrival list daily and assists in preparing and distributing welcome amenities.

e. Always be present in the entrance and should maintain proper decorum at all times.

f. Promotes all the new and existing beverage and event in the outlet.

2. REQUIREMENTS

a. Ability to work during all business hours (including holidays, events & weekends)

b. Ablity to handle multipal tasks.

c. Will initiate activities that promote the cleanliness and appearance of the premise

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Senior Design Engineer
5 days
9am-6pm
Kallang
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Key Responsibilities:

• Develop, manage, and oversee design drawings using advanced design tools such as BIM, Rhino, Grasshopper, and CAD technologies.
• Ensure the compatibility of all models and facilitate seamless access to BIM data for all project stakeholders.
• Collaborate with project teams to ensure design deliverables align with project requirements and standards.
• Provide technical support and guidance on design processes, ensuring accuracy and efficiency in project execution.
• Stay updated with the latest advancements in design tools and methodologies to enhance project outcomes.

Requirements:

• Proficiency in Revit, Navisworks, Rhino, Grasshopper, AutoCAD, and MS Office Suite.
• Familiarity with design file formats and platforms such as DGN, DWF, IFC, and MicroStation is advantageous.
• Strong analytical and problem-solving skills with attention to detail.
• Ability to work effectively in a team-oriented environment and manage multiple projects simultaneously.
• Relevant educational background in architecture, design, or a related field.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire a Solution / Domain Architect to support our client in Singapore which is a top global investment bank.

Your background

• You have domain knowledge of Payments, Accounting Services, Liquidity Management, Receivables, Trade & Supply Chain Finance, Commercial Card domains (some or all preferred).
• You have had experience driving shared service strategy and performance culture.
• Drives best practices approach to the continuous improvement of our products, processes, and tools.
• You are a motivated self-starter.
• You thrive in a fast-paced, team-based environment.
• You have relevant IT experience (SDLC – Waterfall / Agile).
• Strong Business Partner coordination.
• You can lead and contribute to automation, causal analysis, and development of shared / common solutions.
• You have strong verbal and written communication skills (able to cater to technical and non-technical audience).
• You are an analytical and innovative thinker, pays great attention to details and enjoys solving problems.
• You can translate complex concepts into multiple architectural “views” aimed at varying audiences.
• You have broad based IT knowledge and experience across Financial Software, Middleware, Databases.
• You can interpret business needs and apply innovative technology solutions.
• You have at least 8+ years’ experience working in Banking / Financial Services Technology discipline.
• You have a bachelor’s degree in computer science / related field or related work experience.

What you can expect

The Team provides Global Corporate & Investment Banking and Global Payment Solutions with direction on technology strategy and solutions in order to align with the business strategy. The Team manages architecture-related risks along with driving adherence to published standards, principles, and technology blueprints. The Team current has an exciting Solutions Architect opportunity for an experienced technologist supporting Payments, Accounting Services, Liquidity Management, Receivables, Trade & Supply Chain Finance and Commercial Card domains. The Team has a Global presence in the US, EMEA and APAC. The selected candidate would have the opportunity to work on an exciting, challenging, and varied book of work.

What you will do

• Responsible for defining an architectural vision and solution architecture which aligns with the business strategy, enterprise architecture strategy, technology, and platform choices.
• Describes the solution intent and the associated operating environment, determines the primary systems/subsystems and their interfaces, defining non-functional requirements.
• Ensures the solution is fit for purpose by working with stakeholders, vendors/service providers. In parallel, evaluating the impact of strategic design decisions.
• Working with both business and technology to create the solution intent and architectural vision.
• Leads rapid shaping of a high-level architecture with details filled in with emerging business requirements; ensures architecture is flexible and modular and designed to adapt easily.
• Utilizes the defined best practices, templates, and documentation to create architectural designs.
• Works with Product Manager/Owner to plan and prioritize technology focused backlog items for the architecture runway.
• Clarifies the architecture for the development teams to support implementation and provides solution options to resolve any impediments.
• Performs design reviews to ensure all non-functional requirements for a solution are sufficiently met (e.g., security, performance, maintainability, scalability, usability, and reliability).
• This is an individual contributor position.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Job Summary

We are looking for enthusiastic Media Design & Production Interns who are looking to broaden their knowledge and skills in developing creative visuals and interactive media for executing branding strategies and marketing campaigns.

You will be involved in Bizsquare's and our clients' design and branding projects, as well as content marketing initiatives to drive traffic, engagement and leads, with the ultimate goal of increasing brand awareness and lead generation.

Responsibilities and Duties

• Design work for brand visuals and social media content

• Media production work like photography/videography and editing for branding & marketing collaterals

• Develop content marketing and brand strategies to reach out to the targeted audience using all marketing channels like website and social media etc.

• Create new ideas for campaigns to support brand awareness and lead generation efforts

Requirements

• Proficient in Adobe Photoshop/Illustrator and Adobe Premier Pro

• Able to adhere to milestones and deliverables, strong time management skills

• Creative mindset and has a flair in design

• Self-motivated and independent

Established in 2020, Riot Singapore Studio has been expanding our footprint in Asia and accelerating our talent growth to develop games that deliver great experiences to our players. Our mission is to “scale Riot’s games to hyper-serve players.”

We partner with our LA headquarters on game development for League of Legends, Teamfight Tactics, VALORANT and 2XKO. The Singapore Studio is seeking talented, passionate craft experts with backgrounds in all areas of game development to build games that make it better to be a player.

We’re focused on working together to promote individual autonomy, ownership, collaboration, and inclusivity, so everyone can be their best while we boldly pursue games.

That's where you come in.

As a Concept Art Lead in the Singapore Studio, you will channel your knowledge of concepting, modeling, and texturing to help tell stories through visually compelling characters, creatures, props and illustrations.

You’ll expand and support a high-performing external team and give them the guidance and context they need to deliver amazing concepts that set industry standards on craft, meet all technical requirements, and match the League of Legends art style.

Through a mix of craft training and hands-on leadership, you will level up the team’s craft, mediate and resolve craft disagreements and misalignment, and keep the team motivated towards creating excellent experiences for our players. Using your broad knowledge of art, craft, and technique, you’ll set clear goals for your team and make sure the process of delivering those goals is as smooth as possible for your team and their stakeholders.

You will partner closely with the product teams and other artists, ensuring that art quality is excellent and is able to effectively promote and align with larger products. You will maintain your craft skills, inspire creativity and keep a high-quality bar with hands-on work as you deem necessary.

Responsibilities:

• As an Art lead on the team, you will oversee and be accountable for the quality of the work the team delivers and set the bar for excellence
• You will build a world-class team by sourcing AAA Concept talent in China and developing and growing their concept skills through training and feedback
• You will establish and maintain a highly engaged, creative, and motivated workspace for your team to unleash people’s potential.
• You will be responsible for driving innovative ideation and design aspirational concepts to set up other disciplines for success.
• You will collaborate with Rioters in Singapore and worldwide to make sure product goals are fulfilled, and working practices are appropriate
• You will set a clear vision and strategy to grow your team, provide consistent feedback, and build trust with your team
• You will drive the concept development for 2D and 3D art products
• You will lead and improve team rituals to support high-quality craft and individual growth
• You will accomplish your mission with complete autonomy if needed; you're dedicated to vigilantly finding creative and effective solutions to eliminate complex problems.

Required Qualifications:

• Demonstrated experience working directly with an outsource vendor either as an Art Outsource Manager or as a Concept Art Lead
• 5+ years experience in the video games industry
• 2+ years experience of management experience
• Extreme proficiency in art fundamentals such as anatomy, composition, design, and color theory
• A clear understanding of the League of Legends art style
• Proven experience leading/mentoring teams and individuals. Growth minded and motivated toward teaching, enabling, and coaching other artists
• Experience giving thorough direction and delivering timely, clear, actionable feedback
• Strong background in concept art and a good understanding of technical limitations for 3D assets.
• A strong communicator and able to convey abstract/sophisticated ideas concisely in English or Chinese

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Skin analysis: Analyzing clients' skin and hair types to provide appropriate services
• Treatments: Performing facials, waxing, hair removal, body scrubs, tanning treatments, and massages
• Hair and makeup: Applying hair products, styling hair, and applying makeup
• Manicures and pedicures: Giving manicures and pedicures based on clients' preferences
• Skin care: Advising clients on how to take care of their skin
• Client records: Maintaining client records, including contact details and treatments
• Product recommendations: Recommending products to clients
• Hygiene: Maintaining hygiene in the workplace and sterilizing equipment
• Customer service: Greeting customers, providing exceptional customer service, and building long-lasting relationships with customers

This role designs applications required to automate business processes and meet business needs. The resulting design may run on multiple platforms and may be composed of multiple software packages and custom components.

This role defines best practices in the critical evaluation and selection and / or development of the software components and hardware requirements of the applications and data, and the development of the application, including evaluation and selection of development methods, development processes, best practices and tools.

Applications Architects are responsible for applications-related quality, performance, availability, scalability, and integrity. They are also responsible for the functional interface to applications and for ensuring application usability.

Job Description :

• To support our marketing team to contact, follow-up on the leads generate
• To gather information from customers on their renovation needs
• To arrange appointments to meet our Sales Designer for further consulation & quotation
• To assist marketing team to generate more appointments from the leads
• To assist marketing team in the events and other day to day activities

This role is ideal for person

Strong communication skills

Convincing & good interpersonal relationship

Responsible for making cold calls to potential clients and candidates, generating leads, and assisting in various administrative tasks.

Key Responsibilities:

Conduct cold calls to interested/inquiries for home renovation

Maintain detailed records of all telemarketing activities, including calls ,follow-ups & appointments

Respond promptly to client/customers inquiries via phone/whatsapp and email.

Schedule meetings, and follow-ups as needed.

Address questions and objections to highlight the value of our services.

Gather and record customer information for appointment setting and future follow-up.

Roles & Responsibilities

Job Description:-

• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• To lead chainman in executing work
• To study pre-comp (to study discrepency of surveying data and establish site boundaries control point) survey plan for project execution
• To verify the accuracy of survey data, including measurements and calculations conducted at survey sites
• Ensure all setting up are within contract boundary
• Prepare site setting out data, plan and map for Survey crew
• Volume Calculation if required
• Liaise with client and contractors on survey matters
• Co-Ordinate with Engineers, Site Supervisor, various sub-contractors for surveyor related works
• Record and data collection for the preparation for As- built drawings
• Supervise field crew performing various surveying functions

Requirements:-

• Diploma, Advanced/Higher/Graduate Diploma, Engineering (Civil) or equivalent or Trade Certificate in Engineering Surveying Course
• At least 8 year(s) of working experience in the related field is required for this position.
• Knowledge in CAD drawings for extraction of coordinates for site markings, picking up of as built data, establishing reference points, control points, TBM

Interested candidate may send resume to [email protected]

SMALLWOOD is an international design firm headquartered in Atlanta, USA, with a thriving design office in Singapore. Our Singapore office is home to a seasoned team of design professionals delivering innovative and world-class design solutions for hospitality, residential, office, and master planning projects.

We’re expanding our core design team and seeking an experienced and accomplished Senior Interior

Designer to join our Singapore office. If you're passionate about hospitality design and adept at leading large-scale international projects, this is an excellent opportunity for you. With a focus on hospitality, we offer the chance to gain international experience while working on projects across Southeast Asia, India, the Middle East, and Africa. You’ll collaborate closely with the Principals and Design Leads, mentor project team members, and take a leadership role in delivering innovative, high-quality design solutions.

Key Responsibilities:

• Lead project teams to develop and execute design solutions that meet international standards.
• Oversee and coordinate the full scope of ID documentation, from presentation materials to detailed technical documents, ensuring quality and consistency throughout.
• Foster a collaborative team environment, balancing leadership with teamwork.
• Take ownership of project deadlines and deliverables, ensuring schedules are met while maintaining high standards.
• Be creative, open-minded, and imaginative.
• Familiarity with Sketch-up 3D modeling will be an advantage.
• Collaborate with Principals and Associates to direct, supervise, and review the work of team members, ensuring accuracy and quality across all design phases.
• Works in tandem with highly collaborative multi-disciplinary design teams.

Qualifications / Skills:

• Diploma, Bachelor’s or Master’s degree in Interior Design
• Minimum of 10 years of professional experience, with a focus on large-scale international hospitality projects.
• Strong creative vision and expertise in conceptualization, graphic presentation, and FF&E design and documentation.
• Project management skills, with the ability to oversee and manage multiple projects, timelines,budgets and teams.
• Excellent written and verbal communication skills, with strong analytical and problem-solvingabilities.
• Attention to detail, commitment to quality, and the ability to work independently while taking initiative.
• Technically creative, adaptable, and open-minded.
• Proficiency in AutoCAD and Photoshop required.

Salary Range:

• SGD 6,000 to 8,000

5 days Mondays to Fridays: 8:30am to 6pm
$5000 – $9000
Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Conduct mooring analyses, installation analyses, riser analyses, sea fastening design, and diffraction analysis
• Deliver engineering deliverables to support specific projects either independently or through the management of internal and external resources
• Develop operational procedures for offshore utilization
• Identify equipment requirements for projects, including rigging design, and interface with sales and/or rental departments for procurement and delivery
• Develop mobilization and demobilization plans
• Create, maintain, and report project schedules as required
• Attend meetings with clients and sub-contractors
• Actively participate in HIRAs and QHSE-related activities
• Produce scopes of work for sub-contractors
• Attend and oversee offshore operations during execution phases to ensure adherence to procedures and guidelines
• Travel offshore and internationally as required

Requirements:

• Honours degree accredited by the Engineering Council in Naval Architecture
• Min 5 years' experience working within the Energy Industry, specifically Oil and Gas or Renewables
• Competency in a mooring analysis software with a knowledge of Orcaflex, Ariane, Hydrostar, Moses, GMOOR (or similar) being advantageous
• Project experience coupled with business acumen, the ability to apply knowledge, and the confidence to act as required.
• Ability to travel offshore and internationally as required

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279