Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Highlights

• Uncapped income ceiling
• Full guidance from start to end

Job Description

Concrid Interior - Our Design Ideas Are 100% Brain-Made

Successful candidates will be able to tap into our extensive in-house sales support to achieve a good stream of uncapped income and we believe in work-life balance.

What you'll be doing

• Handle sales inquiries (quality leads will be provided)
• Prepare proposals and quotations
• Manage project reno sites
• Senior Designers will be considered to lead a sales team
• Does not require to perform any showroom duties

What we are looking for

• Strong interest and passion in Interior Design
• Required skills: Excellent sales communication skills, possess a good command of languages, able to provide after-sales service
• Preferably experienced in sales or design

Benefits

• Full commission based
• Uncapped income ceiling, proven earning capacity of $5,000-10,000 monthly for performing consultants
• Mobile and entertainment allowances
• Quarterly bonus packages (up to $10,000)

Others

• Extensive sales training will be provided
• Only quality leads will be provided (untouched)
• One of the best incentive bonuses in the market

If you do not possess the above but think you want to give Interior Design a shot, do hit us up, we would love to have a chat!

Unleash your earning capability with us today!

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Responsibilities:

• Create mood boards, develop designs, and present them.
• Conduct research on designs and fabrics, source materials, and prepare prototypes.
• Create technical drawings for sampling and presentation.
• Liaise with relevant parties on development and construction.
• Manage the fabric and trims library.

REQUIREMENTS:

• Diploma or Degree in Fashion Design or related field.
• At least 3 years of relevant experience in fashion design.
• Knowledge of textiles, garment construction, design, and development.
• Proficiency in Photoshop and Illustrator.
• Able to work under pressure, manage multiple projects, and meet tight deadlines.
• Good team player with excellent interpersonal, planning, and organizational skills.

A company that aims to provide Contemporary style furniture and styling ideas to house-proud house owners looking for great style and design.

We are looking for like-minded people who are result focused, entrepreneurial, and practical to join our team. Someone who enjoys which will provide professional advice or recommend solution for our customers as an in-house stylists.

Duties and responsibilities include working closely with customers to determine their needs, answer their questions about our products and recommend the right solutions. You should also be able to promptly resolve customer complaints and ensure maximum client satisfaction. Stay up-to-date with product features and maintain our store’s visual appearance in high standards.

Requirements

• Local applicants only with minimum 5 years experiences
• Interior Design skill a PLUS
• Go the extra mile with positive attitude
• Maintain in-stock and presentable
• Remain knowledgeable on products offered and discuss available options
• Build productive trust relationships with customers
• Comply with inventory control procedures
• Works well in a team environment
• Basic understanding of sales principles and customer service practices
• Proficiency in English
• Solid communication and interpersonal skills
• A friendly and energetic personality with customer service focus
• Ability to perform under pressure and address complaints in a timely manner
• Availability to work flexible shifts

Who We Are

Synergraphic is a premier art+design studio and supplier for interior and architectural art glass solutions, bespoke lighting, installations, sculptures, features and murals for indoor and outdoor spaces. Striving to support ambitious architects, designers, brands and institutions globally to achieve breakthroughs in concept and design, Synergraphic seeks to use the fluidity of glass to create inviting features of all forms, functions, sizes and scales that are enduring and iconic to its clients’ personalities and brands.

Since 1986, Synergraphic has created hundreds of features in glass and mixed media for projects in more than 15 countries, with landmark locations including St Regis Singapore, Partners Monument at Taipei 101 and the Crystal Pyramid in Brunei.

Who We Are Looking For

At this stage of our business we are looking to grow strategically, and are focused on seeking out individuals in every department of the company who are passionate, sharp, initiated and willing to take on challenges to help drive the business forward together as a team. We are now searching for a highly-skilled Project Executive to run projects, contribute to Synergraphic’s growth and help us maintain our position as an innovative authority. The ideal candidate will have technical experience in the Building Materials trade as well as strong organisational and communication skills to deliver on our projects.

Your Responsibilities Include

• Overseeing projects from beginning to end
• Managing the budget and estimate costs
• Handling all preliminaries such as site inspection, measurements, and all other necessary prelim groundwork, sample submission, technical drawings and calculations.
• Sourcing for suppliers and materials to get the best quotes for purpose of submission and cost control
• Recording all correspondence/paperwork properly and thoroughly for all projects under your charge.
• Preparing documents and materials including samples for submission and presentation to and approval by client
• Liaise closely with internal Sales, Design, Contract and Production and Installation departments to deliver all tasks stated
• Upon confirmation of project, to liaise and co-ordinate with relevant parties including owners, architects, suppliers, designers, engineers, main and sub-contractors, our own site and factory personnel for work progress and timely deliveries.
• Resolve any problems that may arise
• Be available at all times for urgent calls and attendance required at site.
• Any other tasks assigned by Supervisor

Technical Skills

• Diploma in any Engineering discipline, Construction Management, related discipline in QS or certification in project management
• At least 20 years of relevant experience in Building Materials/Construction Industry
• Use of all relevant Microsoft software
• Able to read technical drawings and oversee production of drawings

Soft Skills

• Strong communication and negotiation skills
• Excellent planning and organisational abilities
• Good team player and adaptable to a dynamic environment
• Able to work well under stress and problem-solve
• Able to resolve conflicts and manage workers
• Able to multitask

Who We Are

Synergraphic is a premier art+design studio and supplier for interior and architectural art glass solutions, bespoke lighting, installations, sculptures, features and murals for indoor and outdoor spaces. Striving to support ambitious architects, designers, brands and institutions globally to achieve breakthroughs in concept and design, Synergraphic seeks to use the fluidity of glass to create inviting features of all forms, functions, sizes and scales that are enduring and iconic to its clients’ personalities and brands.

Since 1986, Synergraphic has created hundreds of features in glass and mixed media for projects in more than 15 countries, with landmark locations including St Regis Singapore, Partners Monument at Taipei 101 and the Crystal Pyramid in Brunei.

Who We Are Looking For

At this stage of our business we are looking to grow strategically, and are focused on seeking out individuals in every department of the company who are passionate, sharp, initiated and willing to take on challenges to help drive the business forward together as a team. We are now searching for a dynamic Operations Executive to manage daily operations, contribute to Synergraphic’s growth and help us maintain our position as an innovative authority.

As an Operations Executive, you will be responsible for managing daily operations by working with a cross-functional team. As someone overseeing the entire process, you will need to have big picture vision while maintaining an intimate knowledge of every department and various processes.

You will be responsible for ensuring production and project deadlines are met while maintaining quality control standards. You will also report to the CEO, helping to create policies, processes and strategies that help Synergraphic run efficiently and profitably.

The goal here is to mitigate operational errors on a daily basis to continue driving processes forward, building a strong foundation for Synergraphic to achieve greater growth for all.

Your Responsibilities Include

1. Assist Senior Operations Manager in the daily operations and manpower planning to ensure smooth operations of the workplace
2. Liaise with Clients/Suppliers/Sub-contractors and co-ordinate with project / retail teams to confirm and process orders
3. Forecast, plan and schedule manpower and materials for measurement, production and installation works to meet project requirements and deadlines
4. Update daily operations report
5. Perform inventory control and monitor stock movement
6. Prepare relevant documents including POs, quotations and claims
7. Perform verifications of suppliers/sub-contractors billings
8. Arrange incoming/outgoing documentations and schedules
9. Assist the management in developing strategic long-term plans to achieve strategic goals and objectives
10. Other ad-hoc assignments required

Technical Skills

• Min. Diploma in any Manufacturing or Engineering discipline, or related disciplines
• At least 5 years of relevant experience in Building Materials Industry
• Use of all relevant Microsoft software
• Experience with glazing materials and methods is preferred
• Experience in directing and supervising production personnel

Soft Skills

• Strong communication skills
• Able to lead and drive continuous improvement
• Able to negotiate and adapt to ongoing changes in manpower and material availability
• Excellent planning and organisational abilities
• Good team player and adaptable to a dynamic environment
• Able to work well under stress and problem-solve
• Able to multitask

Seeking a meaningful design internship?

Expand Your Creative Limits with APT811: Where Design Meets Innovation

We’re seeking a design intern to join our small, lean team. Our goal is to give motivated designers the chance not just to be creative but to be strategic and thinking designers.

Needed: Basics in graphic communication design, visual hierarchy, Adobe CC (Photoshop, Illustrator, InDesign), and Figma.

This role is for those ready to integrate AI into design and work closely with our founders. It is ideal for individuals with a growth mindset looking to improve their design strategy and execution.

Our four pillars guide your growth: technical skills, strategic thinking, personal growth, and social influence. Progress through a structured path to develop your abilities.

What’s in it for you at APT811:

• Use professional AI design tools
• Create impactful designs with clarity
• Learn effective brand communication
• Strengthen your growth mindset
• Access a wealth of training resources

Work Responsibilities

As an intern at APT811, you will play a vital role in our team, contributing to various projects and honing your skills. Your responsibilities will include:

Brand Communication and Research:

• Work on brand communication touchpoints.
• Conduct research using AI tools like Custom GPT, Midjourney, and SEMrush (SEO).
• Analyse market trends and competitor strategies.

Design and Development:

• Create brand and campaign collaterals.
• Design brochures, posters, digital ads and various touchpoints.
• Ensure all designs align with brand guidelines.

Workshop Facilitation:

• Assist in planning and organising design thinking workshops.
• Support facilitators during sessions.
• Engage with participants and gather feedback.

Proposal and Presentation Support

• Help draft and design brand proposals.
• Contribute creative ideas and concepts.
• Develop visual narratives for presentations.

Continuous Learning and Application:

• Learn and apply new design software and tools.
• Participate in brainstorming sessions.
• Engage in training sessions and workshops to improve your skills.

If you have a growth mindset, like strengthening your resilience and thinking strategically, we'd like to work with you!

Apply today and do good with design together.

www.apt811.com | www.thinkroom.sg

Team

ServiceNow is seeking Enterprise Architects to join our Team. The Enterprise Architecture Team is part of our pre-sales organization focused on building credibility and trust with the technical leaders in our largest customers by developing cross-functional strategies and solutions. Our team brings technical expertise, real-world experience, strong executive engagement skills and an inspirational mindset to help our customers understand the opportunities of the “platform of platforms” vision. We act as technical leaders for our customers' most complex solutions, designed to ensure that they can realize the value they need. We do this by leveraging best practice and industry standards to build customer trust and architect best-in-class solutions.

While collaborating with customers, partners, and the wider ServiceNow sales team, the right candidate will create and communicate high-level architectures and strategies that are both written and verbal, to audiences up to and including the CIO/CTO level. The Enterprise Architect will elegantly articulate the advantage of ServiceNow being built on a single cloud platform consisting of a single user interface, one code base and one data model. The Enterprise Architect will also lead and participate in the delivery of workshops, best practice overviews, and educational sessions to existing customers and partners.
 

What you get to do in this role:

• Engage with customer executives to identify pain points and opportunities to deliver value and then translate them into solutions from ServiceNow
• Work with a wide variety of customers, colleagues, and partners to help them understand the power of the Now platform and the potential opportunities of the future of work
• Lead architecture and design engagements to demonstrate how ServiceNow meets the needs of strategic customers, including; IT Transformation, Digital Products/Services, Platform as a Service, Enterprise Service Management, and the co-creation of industry specific solutions.
• Understand the business strategy of the customer and articulate how ServiceNow can enable and deliver value to their organization, seamlessly integrating into their current and future technology landscape
• Understand the detail behind the ServiceNow and platform of platforms architecture and communicate it at various levels
• Work with architecture development methods, modelling approaches and architecture patterns for integration
• Interact at multiple levels within a customer account (Enterprise Architects, Domain Architects, Directors, VPs, and CXOs) and maintain these relationships throughout their customer journey.
• Provide thought leadership and collaborate with internal ServiceNow business units
• Identify, lead and contribute to the creation of best practices, white papers, workshops, etc

Naval Architect

Salary: $5000 – $9000

Working Days: Mondays to Fridays (8:30am to 6pm)

Working Location: Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Conduct mooring analyses, installation analyses, riser analyses, sea fastening design, and diffraction analysis
• Deliver engineering deliverables to support specific projects either independently or through the management of internal and external resources
• Develop operational procedures for offshore utilization
• Identify equipment requirements for projects, including rigging design, and interface with sales and/or rental departments for procurement and delivery
• Develop mobilization and demobilization plans
• Create, maintain, and report project schedules as required
• Attend meetings with clients and sub-contractors
• Actively participate in HIRAs and QHSE-related activities
• Produce scopes of work for sub-contractors
• Attend and oversee offshore operations during execution phases to ensure adherence to procedures and guidelines
• Travel offshore and internationally as required

Requirements:

• Honours degree accredited by the Engineering Council in Naval Architecture
• Min 5 years' experience working within the Energy Industry, specifically Oil and Gas or Renewables
• Competency in a mooring analysis software with a knowledge of Orcaflex, Ariane, Hydrostar, Moses, GMOOR (or similar) being advantageous
• Project experience coupled with business acumen, the ability to apply knowledge, and the confidence to act as required.
• Ability to travel offshore and internationally as required

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

• You will be responsible for planning, preparing, and pitching the project cost to clients on behalf of SM inline with business plan of SM
• Prepare and manage project cost estimates, budgets, and cash flow projections.
• Prepare tender and contract documents, including bills of quantities, specifications, and drawings.
• Monitor project progress and track costs against budget, identifying and reporting any variances or potential issues. Control and mitigate risks related to cost overruns w.r.t estimates or savings plan
• Prepare and submit monthly progress reports to senior management and project stakeholders.
• Prepare claims for variations or additional works, and negotiate settlement with clients and contractors.
• Participate in project meetings, providing cost and contractual advice to project managers and other stakeholders.
• Maintain accurate and up-to-date project cost records, ensuring compliance with company policies and procedures.
• Prepare and present final accounts and claims, ensuring timely and accurate settlement.
• Participate in project meetings, providing cost and contractual advice to project managers and other stakeholders.
• You will maintain all the documents for total compliance related to design, contractors, legal and other matters as per company standards. Maintain accurate and up-to-date project cost records, ensuring compliance with company policies and procedures.
• Assist with the preparation of the documentation and the cover letters.
• Perform electronic registration, filing and distribution of documents.

What we Expect

• You are a QS professional with a minimum 7 years of relevant experience managing corporate/ workplace interior fit-out projects.
• Cost Estimation Skills: You have experience in creating accurate cost estimates for construction projects, using appropriate methods and tools, and taking into account factors such as labor, materials, equipment, overhead costs, and contingencies.
• Technical Knowledge: You possess a solid understanding of construction techniques, materials, and systems to accurately evaluate project costs and assess potential risks.
• Analytical Skills: You be able to analyze data, evaluate options, and make informed decisions on cost-effective solutions for construction projects.
• Communication Skills: You be able to effectively communicate cost-related information to various stakeholders, such as project managers, clients, and suppliers.
• Teamwork and Collaboration: You have experience working collaboratively with a team, including architects, engineers, and contractors to develop accurate cost estimates and proposals.
• Time Management: You be able to manage multiple tasks and projects simultaneously and meet deadlines in a fast-paced environment.
• Knowledge of Regulations and Standards: You be knowledgeable about relevant regulations and standards, such as building codes and safety requirements.
• Computer Skills: You have experience with relevant software applications, such as cost estimating software, spreadsheets, and project management tools. And you have experience in successfully adopting digital and technology initiatives.
• Attention to Detail: You have a keen eye for detail, ensuring that all costs are accounted for and accurately reflected in project estimates.
• Cost Control: You be able to identify potential cost-saving opportunities and implement measures to control project costs while maintaining quality standards.
• You have a diploma or degree in quantity surveying/ construction management or a related discipline.
• You have the knowledge of individual trades and subcontractors relevant to interior fit-outs
• You are tech-savvy, and have experience in successfully adopting digital and technology initiatives.
• You have the ability to work in a fast paced environment without compromising on quality and customer satisfaction.
• You work well under pressure and have the ability to work independently with minimal supervision.
• You will be a subscriber to the Company’s core values: teamwork, integrity and excellence.

About us:

Pls. visit our website : www.spacematrix.com

Join Our Team as an Retail Sales Executive (Interior Stylist) at BoConcept!

Are you passionate about creating captivating spaces that resonate with clients? Do you thrive on delivering exceptional customer experiences? Look no further! BoConcept is seeking dynamic individuals to join our team as Interior Stylists.

As an Interior Stylist with BoConcept, you'll be at the forefront of our showroom, welcoming and educating customers on our functional and customisable products and styling concepts. You'll have the opportunity to unleash your creativity by offering personalized furniture and interior decoration solutions that align with BoConcept's renowned style guidelines.

Why Join Us?

At BoConcept, if you are looking for a fulfilling and dynamic career, love a fun-filled work environment, enjoy interacting with people, then you’re the one we are looking for.

Now, we are going to tell you why you should be a part of this ever-growing company. Some of the perks include an easily accessible office, flexible working hours, tons of retail, furniture and F&B discounts, as well as a fun and dynamic working culture that redefine a job.

Responsibilities:

• Host walk-in customers and educate them about the concept of the showroom and its products.
• Assess customer's needs and offer solutions to customers based on their requirements.
• Build trust and maintain relationships with customers.
• Maintain a high level of product knowledge including target groups, the product range, industry trends, customization and selling arguments.
• Handle retail responsibilities such as housekeeping of store, providing strong customer service to customers.
• Offer customer complete and professional interior decoration solutions for their homes which adhere to BoConcept guidelines.
• Update personal sales figures daily/weekly and continuously improve performance to meet sales targets.
• Ensure an optimal flow of goods by following up on all deliveries, payments and keeping the stock room well organized.
• Follow up actively on sales orders, deliveries and claims to ensure a high level of after-sales service.
• Make appointments with customers for Interior Design Service.
• Work in collaborative spirit with Interior Designer or appointed contractor by customer (if any).
• Able to perform all duties and responsibilities in a timely manner in order to achieve the overall target.
• Be a strong Brand Ambassador to promote the BoConcept Missions and Vision.
• Perform miscellaneous duties as assigned.

Requirements:

• Candidate with Diploma, Bachelor’s Degree in Interior Design, Architecture or equivalent is a plus
• Great team player, good interpersonal skills, and self-motivated
• Ideal candidate is also passionate about creating exceptional in-store experiences
• Candidates with relevant experience will be considered for the senior role
• Candidates with experience with Autocad / Sketchup / 3D rendering software is a plus
• 5 Day Work Week including weekends (10am - 6pm / 10am - 8pm)

Candidates with no working experience are welcome to apply!

You will receive a basic monthly salary plus commission upon meeting your sales targets!

• Estimate the quantity and cost of materials and labours for construction
• Preparing, negotiating and analysing costs for tenders and contracts
• Liaise and establish support pertaining to financial budgeting with client, project managers, consultants, and contractors
• Sourcing and/or obtain quotations from suppliers and sub-contractors for the preparation of cost estimation.
• Provide price comparison between different sources to have a competitive pricing.
• Discuss and coordinate with other QS to prepare quotations.

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

• Well Established Company
• Basic $5000 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Who We Are Looking For

We are looking for an experienced and empathetic HR and Admin Executive who is excited to grow and maximise the potential of our team and support our visions for culture.

You will be instrumental in the smooth running of the entire organization and will help us keep our people happy and productive.

Job Responsibilities

• Planning HR and administration activities annually
• Setting, monitoring, and achieving HR targets
• Managing recruitment, onboarding, and exit procedures
• Overseeing the payroll function
• Ensuring full compliance with company policies and procedures
• Managing employee relations
• Carry out performance reviews for employees
• Plan and execute training and wellness programmes
• Running the office and facilities management functions

Required Skill Set

• At least a Diploma in Human Resources or Management
• At least three years’ experience in HR
• Expert business and organizational planning ability
• Experience in team leadership
• Successful experience in employee relations
• Excellent written and verbal communication
• Strategic thinking ability
• Proven ability to multitask

Responsibilities:

• Conceptualize and develop comprehensive designs for retail environments, events, and exhibitions, from initial layouts to production-ready assets.
• Create high-quality renderings, technical drawings, and graphic designs tailored to the retail industry.
• Collaborate with clients and stakeholders to present ideas, gather feedback, and ensure alignment with project objectives.
• Develop key visuals and social media content to support marketing initiatives.
• Stay updated on the latest multimedia technologies, industry trends, and innovative design solutions.
• Apply expertise in materials, production techniques, and space planning to ensure design feasibility and excellence.
• Coordinate with creative teams to deliver impactful design solutions efficiently and effectively.
• Provide detailed specifications and articulate design concepts clearly to ensure seamless implementation.

Requirements:

• At least 6 years of experience in event, exhibition, or retail design with a focus on the retail marketing industry.
• Proficiency in design software, including AutoCAD, 3D Max, Vray, Illustrator, and Photoshop.
• Educational background in Events & Exhibition Design, Interior Design, or related fields.
• Strong communication, leadership, and project management skills, with the ability to lead large-scale projects and creative teams independently.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Benefits:

• Basic salary can up to $2500 + Attractive Commission

• AWS + VB

Job Scope:

• Promote and demonstrate products to customers, emphasizing key features and benefits to boost sales.

• Engage with customers to assess their needs and provide guidance for informed purchasing decisions.

• Consistently meet or exceed sales targets set by the store or company.

• Ensure product displays are well-organized and visually appealing, while setting up promotions when necessary.

• Maintain accurate sales records and regularly report performance metrics to management.

Job Requirements:

• Prior experience in sales or retail is preferred.

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Responsibilities:

• Define requirements and features for Back-end semiconductor equipment.
• Develop and improve the concepts/architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Produce detailed engineering drawings.
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations, and product requirements.
• Application of analysis tools like Fish Bone Diagram, FMEA, DOE, etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering with minimum of 5 years of experience in automation design.
• Good knowledge and experience in the design of Automation or semiconductor equipment, High precision machine design, or Design of High-Speed Pick and Place mechanisms.
• Proficient with 3D CAD software and performing Equipment troubleshooting.
• Able to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.
• Ability to work independently with high level of motivation and communicate with all levels.
• Able to travel overseas for field support when required.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 21623

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

We are expanding faster than our post-holiday bellies, and we're looking for hungry, talented good people with the appetite to match the ambition.

We are looking for an Art Director to join our family.

What we’re looking for

• Problem solvers – people who see opportunities in every problem and use their creativity to solve the problem on hand

• Creative thinkers – people who champion creativity that meets the business objectives

• Leaders – mentors who’d train the Good to be Great, identity and recruit people better than us, and work collaboratively with both internal and external stakeholders

Requirements/Qualifications

• A minimum of 2 years of experience in digital and/or social communications

• Strong conceptualisation skills

• Strong art direction skills

• Strong management skills

• Someone who walks the talk

• A good sense of humour doesn’t hurt

Responsibilities

• Prospect and secure new business opportunities by leveraging market research, networking, and direct outreach to build a strong sales pipeline.
• Conduct customized presentations and showcase furniture solutions that align with client requirements and objectives.
• Facilitate contract negotiations and ensure agreements meet both client expectations and company standards.
• Cultivate and maintain long-term client relationships to drive repeat business and referrals.
• Consistently achieve or surpass sales targets, contributing to overall team revenue goals.
• Stay informed about industry developments, competitor offerings, and market conditions to identify and capitalize on emerging opportunities.

Requirements

• Diploma in Business, Marketing, or a relevant discipline, or equivalent work experience.
• Demonstrated success in sales, preferably in the furniture or interior furnishings industry
• Strong communication, negotiation, and interpersonal skills.
• Proven ability to drive results and meet sales targets effectively.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Job Description:

We are seeking an experienced Design Manager to lead and oversee the design and development of Mechanical & Electrical (M&E) systems for environmental and waste management projects. The ideal candidate will ensure designs meet regulatory standards, project requirements, and sustainability goals.

Key Responsibilities:

• Manage and coordinate M&E designs for environmental and waste projects.
• Collaborate with multidisciplinary teams, including engineers, consultants, and contractors.
• Ensure compliance with regulatory and sustainability standards.
• Review and approve technical drawings, plans, and specifications.
• Provide innovative solutions to optimize project designs.

Requirements:

• Degree in Mechanical, Electrical Engineering, or related field.
• Proven experience in M&E design for environmental or waste management projects.
• Design in Autodesk products, primarily in Revit, Vault, and AutoCAD.
• Create and further develop drawing bases and REVIT families.
• Strong knowledge of regulatory standards and sustainable practices.
• Excellent leadership and project management skills.

License No: 23S1595

Registration No: R23116355

Job Description:
We are looking for a skilled Automation Engineer with expertise in PLC design and programming to support the testing and commissioning of equipment and machinery for the food & beverage and chemical industries.

Key Responsibilities:

• Design and program PLC systems for automated equipment and machinery.
• Perform testing, troubleshooting, and commissioning to ensure system functionality and reliability.
• Collaborate with cross-functional teams to deliver customized automation solutions.
• Provide technical support and training to clients during and after project implementation.
• Ensure compliance with industry standards and safety regulations.

Requirements:

• Diploma/Degree in Electrical, Automation Engineering, or related fields.
• Proficiency in PLC programming (e.g., Siemens, Allen Bradley, or similar).
• Experience in testing and commissioning industrial equipment.
• Knowledge of automation systems in the food & beverage or chemical industries is an advantage.
• Strong problem-solving skills and a hands-on approach.

License No: 23S1595

Registration No: R23116355

• Build and manage a talented, diverse, inclusive team of product designers and leaders that consistently delivers on projects and is well-balanced across a range of design skill sets.
• Drive collaboration and vision across the company to build alignment on priorities leading to product design and execution.
• Shape the product roadmap, both short term and long-term.
• Partner closely with a world-class (and global) team of product managers, engineers, content designers, user experience researchers, data scientists, and product growth analysts to deliver high quality experiences for people across markets, platforms and product surfaces.
• Oversee multiple projects and scale design resources, accordingly, ensuring deadlines are met, your org is effective, and team members are set up for success by setting clear and measurable goals.
• Develop design talent and build a thriving culture where designers grow in their careers and feel a strong sense of inclusion and belonging.
• Design and scale the organization and equip the team for success in their goals.
• Foster a strong, collaborative design practice.