. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

1. Role Description

An operations manager is a key part of a management team and oversees high-level HR duties, such as attracting talent and setting training standards and hiring procedures. They also analyze and improve organizational processes, and work to improve quality, productivity, and efficiency.

2. Specific Responsibilities

· Maintain constant communication with management, staff, and vendors to ensure proper operations of the organization

· Develop, implement, and maintain quality assurance protocols

· Grow the efficiency of existing organizational processes and procedures to enhance and sustain the organization’s internal capacity

· Actively pursue strategic and operational objectives

· Ensure operational activities remain on time and within a defined budget

· Track staffing requirements, hiring new employees as needed

· Oversee accounts payable and accounts receivable departments

3. Competencies

· Assessing and analyzing operational budgets to find ways to minimize expenses and optimize profits

· Assist in managing the online presence of the business, updating events, promotion in the social media

· Develop, implement, and review operational policies and procedures

Job Responsibilities:

• Assist in all the daily administrative work include duly issue of invoices, quotation, collection of payment, official receipt, commission vouchers, filling,etc.
• Assist in preparation of payment/petty cash vouchers and claims and reimbursements
• Assist in preparing and generating monthly financial statements and supporting documents
• Assist in preparing quarterly GST report
• Follow-up on overdue accounts
• Assist in preparation of quotations, and project related matters
• Maintain and upkeep accounting document and records to comply with ISO system
• Handle accounting and clerical tasks that contributes to office efficiency
• Responsible to ensures that office facilities and equipment are appropriately maintained
• Assist colleagues when necessarily
• Perform other duties as assigned

Job requirement :

• Knowledge of accounting software (QuickBooks Pro preferred)
• Proficient in data entry
• Ability to prioritize, multi-task and meet deadlines
• Reliable, neat and organized, fast learner
• Accuracy is essential with good attention to detail
• Focused

Job Description

Job Scope & Responbilities :

* Handle for full set of account

* Financial month end closing

* Coordinate and liaise with external parties like auditors, tax agents and tax authorities

* Responsible for all duties related to Human Resources,

* Monthly payroll preparation, CPF submission

* Responsible of IRAS AIS,IR8A, Corporate tax, Income tax etc.

* MOM WPOL/EPOL/ matter

* Handling other admin duties

* Perform any other ad hoc duties when required.

Job Requirements :

* Candidate must possess at least diploma or equivalent.

* Language: Bilingual in English and Chinese Mandarin (read, write and speak) as the incumbent needs to liaise with Mandarin-speaking associates in the course of work.

* At least 1 Year(s) of working experience in the related field is required for this position.

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D CAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Singapore Good Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

Full Time Position Only.

Responsibilities

1. Demonstrate proficiency in various art techniques, mediums, and styles.
2. Effectively teach students how to use them to express their ideas and emotions.
3. Provide guidance and support to students in developing their artistic skills - drawing, painting, sculpting, and other art forms.
4. Create a positive and inspiring classroom environment that encourages experimentation, self-expression, and collaboration among students.
5. Evaluate and provide constructive feedback on students' artwork, helping them identify areas of improvement and celebrating their achievements.
6. Ensure a safe and orderly art classroom environment, following appropriate safety guidelines and procedures for handling art materials and equipment.
7. Engage children in lessons, ensuring activities are fun and age-appropriate (Engage students with sensory play)
8. Maintain Good and Professional relations with Children and Parents.

Requirements

1. Teamplayer and able to work in a team.
2. Demonstrate proficiency in various art techniques, mediums, and styles.
3. Prepare and organize lesson plans tailored to different age groups and skill levels.
4. At least 1 year experience teaching art to students of various age groups and skill levels.
5. Passion for art education and a commitment to fostering creativity and artistic growth in students.
6. Enthusiastic individual that has initiative, high adaptability
7. Strong communication and interpersonal skills, with the ability to connect with students, parents, and colleagues effectively.
8. Maintain tidiness and cleanliness of studio.
9. Knowledge of safety protocols and procedures for handling art materials and equipment.
10. Able to converse in English and/or Mandarin (as will need to liaise with student and/or parents who speaks in mandarin)

Working Hours
Tuesday: 4pm to 8pm
Wed - Fri: 1pm-8pm
Sat - Sun: 9am-7pm

*Closed Mondays & PH.

Be a Part of Something BIG!

Singtel is seeking an Innovation Design Lead to spearhead the exploration and implementation of cutting-edge design technologies and methodologies. The Innovation Design Lead works at the intersection of design, technology, and business strategy to create forward-thinking solutions that push the boundaries of traditional design. From static imagery to motion graphics, the Innovation Design Lead is able to transform ordinary briefs into extraordinary experiences through creative execution and strategic campaign planning. The ideal candidate will have a strong creative vision and the ability to communicate effectively with both internal and external teams.

Make an Impact by

• Team Leadership - Manage and mentor a team of designers, fostering a collaborative environment that encourages creativity and innovation.
• Project Oversight - Oversee all stages of design projects from conception to execution, ensuring that timelines and quality standards are met.
• Campaign Planning - Collaborate with the marketing team to plan and execute creative campaigns. Ensure all visual content supports the overarching campaign strategy and business goals. Work closely with Creative Lead, marketing teams, peers, and other key stakeholders to brainstorm and develop content ideas. Provide clear, concise direction and feedback to internal and external parties involved in content production.
• Strong Copywriting - Able to complement visual content with creative, clear and concise writing.
• AI Integration: Utilize AI tools to streamline design processes, enhance creativity, and improve decision-making. This includes generative design techniques to explore new concepts and optimize existing designs.
• Stakeholder Communication - Able to collaborate across functions, present design concepts and solutions to stakeholders, articulating the rationale behind design decisions.
• Innovation & Trend Monitoring - Stay updated with industry trends, new technologies, and best practices in visual media. Continuously seek innovative ways to improve content quality and effectiveness, especially in an AI powered world.
• Strategic Design Leadership - Define the overall design strategy, ensuring that it aligns with the company’s vision and leverages AI capabilities to enhance product offerings.

Skills for Success

• Min Diploma holder
• A minimum of 5-10 years of experience in design roles, with at least 2-5 years in a leadership position at an in-house Creative team or advertising agency. Experience with AI-driven design processes is highly desirable.
• Proficiency in modern design tools (e.g., Adobe Creative Suite, Figma).
• Able to drive multiple projects from start to finish.
• An expert in design workflows with the ability to execute static ideas into moving visuals flawlessly. Doesn’t hesitate to get into the details, and does not lose sight of the broader strategic intent.
• Strategic thinker; always curious and creatively-minded in every way.
• Able to give and receive feedback positively without taking it too personally. See the value of different perspectives.
• Willing to work occasionally on weekends & public holidays, if required.
• Strong copywriting and presentation skills and be fluent in English.
• A leader and a good team player; able to work well independently or with a team while under pressure.

Rewards that Go Beyond

• Flexible work arrangements
• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Are you ready to say hello to BIG Possibilities?

Take the leap with Singtel to unlock new opportunities and accelerate your growth. Apply now and start your empowering career!

We are committed to a safe and healthy environment for our employees & customers and will require all prospective employees to be fully vaccinated.

Responsibilities:

• Design and develop engaging art lesson plans for various age groups, focusing on creativity and skill-building.
• Research and incorporate diverse art techniques, trends, and materials into the curriculum.
• Align lesson objectives with the center's goals to ensure consistent learning outcomes.
• Collaborate with instructors to refine and adapt lessons based on classroom feedback.
• Develop supporting materials such as worksheets, guides, and visual aids.
• Ensure lesson plans are age-appropriate, innovative, and aligned with the enrichment center’s standards.
• Conduct periodic reviews to improve and update the curriculum.

Requirements:

• At least 1 year of experience in curriculum development or a related role.
• Prior experience in an art-related teaching or training capacity is highly desirable.
• Proven experience in curriculum development, particularly in art education.
• A background in fine arts, education, or a related field.
• Strong knowledge of various art techniques, mediums, and instructional methods.
• Creative thinking with a passion for fostering artistic growth in students.
• Excellent organizational skills and attention to detail.
• Strong communication skills to work effectively with instructors and team members.
• Familiarity with child development and age-appropriate learning approaches is a plus.

Required to commit at least 3-4 days a week.

Job Description

-Manage day to day operations and ensure smooth running of Tree Art campus.

-Proactively engage customers and build good rapport through understanding of students and their progress development.

-Engage in effective sales pitch through familiarising with Tree Art curriculum and programme.

-Support management in planning and executing strategies to increase sales.

-Plan, organise and communicate to customers on the various programme and campus events.

-Serve as customer’s main point of contact and manage communication platforms.

-Responsible for customer enquiries, student enrolment and post-sales services.

-Coordinate class schedule and arrange for replacement teachers when necessary.

-Monitor student attendance and follow up to arrange for makeup lesson.

-Perform administrative duties including maintaining ERP, student records and tracking withdrawals.

-Share expertise and provide guidance to direct report.

-Motivate and work as a team in the achievement of service excellence and centre targets.

-Liaise with landlord on updates.

-Perform any other duties and responsibilities as assigned by the Operations Director.

Qualification:
-Minimum Diploma in Business, Marketing, or a related field.
-Sales experience in industries such as beauty, cosmetics, or retail services is highly desirable.
-Fresh graduates with a strong sales acumen are welcome to apply.
-At least 1 year of relevant experience in sales, hospitality, marketing, or education.
-Proficient in Microsoft Office (Excel, Word, PowerPoint).
-Excellent communication and interpersonal skills.
-Meticulous, organized, and able to multitask.
-Prior experience working with children is an added advantage.

Working Hours (43 hours per work week):

-Mon : off
-Tuesday - Friday : 1.30pm - 7.30pm
-Saturday and Sunday: 9.00am - 7.30pm

Job Purpose and Key Accountabilities:

As a Management Trainee, your main goal will be to learn and master various aspects of the company's operations, including but not limited to operations management, human resources management, team leadership, decision-making, and problem-solving. Through this training program, you will acquire the necessary skills and knowledge to prepare for future senior management positions.

Key Accountabilities:

1. Continuously learn and understand the specific business operations and management strategies of the company.
2. Participate in and lead team projects, enhancing teamwork and leadership.
3. Effectively manage and execute projects in a multitasking and high-pressure environment, with a results-oriented approach.
4. Solve problems encountered in work, formulate and implement solutions, emphasizing replicable processes.
5. Embrace change, continuously improve your skills and knowledge, and break through your own capability boundaries.

Main Duties and Responsibilities:

• Participate in the company's daily operations and management activities, learning the company's business processes and strategies.
• Assume a leadership role in projects, effectively distribute tasks and manage progress, ensuring smooth completion of projects.
• Think independently when encountering problems, propose and implement solutions, and conduct a review after problem resolution.
• Accept feedback from superiors and colleagues, continuously improve your skills and knowledge, and maintain positive energy with an open mindset to change.
• Enhance your professional knowledge and skills by participating in the company's training and learning activities and continuously learning.

Job Specification:

• Education: Bachelor's or master's degree in business management, education, psychology, or other related fields.
• Skills: Leadership and teamwork abilities, problem-solving and decision-making capabilities, project management skills.
• Personal Characteristics: High self-drive, leadership, adaptability, resilience.
• Career Goals: Passionate about education and training, looking forward to long-term development in the company, willing to take up a management position after completing the training.
• Others: Deep understanding of the education and training market in Singapore, familiar with basic information technology and software applications.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Architecture invites applications for two Tenure Track Assistant Professor positions in Architectural Design.

The Department of Architecture in the College of Design and Engineering is ranked among the top 10 in the world, and Asia’s best in Architecture/Built Environment, by the Quacquarelli Symonds (QS) World University Rankings (2023). It offers the professionally accredited Master of Architecture programme as well as a range of graduate and undergraduate programmes in related fields such as urban planning/design, landscape architecture and conservation. The faculty is correspondingly diverse and international. The Department offers internationally competitive remuneration, generous employment benefits as well as access to research funding for both junior and senior academics. International applicants will also receive subsidized housing at Kent Vale.

Qualifications

Research by Design (RxD) at the Department of Architecture seeks qualified, interdisciplinary, and inspirational candidates with expertise in creative practice research (research through design, as opposed to research for design or research about design). We seek candidates with expertise in design with foundations in decarbonized & planet-positive futures, warming world futures, social justice, and inclusive futures, with a particular focus on being situated in the tropical geographies of Southeast Asia and the equator. Candidate research should be manifested through a robust portfolio of creative practice outputs and substantiated through forms of peer review and public and societal engagement, with evidence of leading with anticipatory and future-forward design ideas that impact evolving society and the profession. We are especially interested in candidates who are leaders in Research by Design methods in the academy and who leverage creative practice to imagine and manifest a more just world.

Successful candidates are expected to teach and lead design studio courses related to research by design, with core, elective, and seminar courses to complement the design studio.

All qualified individuals are encouraged to apply. To apply, please provide the required documents in pdf and indicate which position you are applying for by 15 April 2024. Applications after that date may be accepted if positions are still available. Expected start date of the appointment is end of 2024 or early 2025.

1. A letter of interest
2. A complete Curriculum Vitae
3. A Statement of Teaching (maximum two pages)
4. A Statement of Research (including a short research plan for next three to five years maximum three pages) – citing up to five significant publications, creative work or other scholarly contribution and explaining their significance, and a writing sample.
5. Names of four referees with contact details (who will be contacted only if shortlisted). Please highlight any who is a member of your PhD dissertation committee.
6. Portfolio of work showing research through design

In accordance with the Personal Data Protection Act (PDPA), please provide consent for the collection, use and disclosure of personal data, using the NUS Personal Data Consent for Job Applicants form.

Only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Architecture invites applications for up to two Tenure Track positions in Urban Planning and Design.

The Department of Architecture in the College of Design and Engineering is ranked among the top 10 in the world, and Asia’s best in Architecture/Built Environment, by the Quacquarelli Symonds (QS) World University Rankings (2023). It offers the professionally accredited Master of Architecture programme as well as a range of graduate and undergraduate programmes in related fields such as landscape architecture, integrated sustainable design and architectural conservation. The faculty is correspondingly diverse and international. The Department offers internationally competitive remuneration, generous employment benefits as well as access to research funding for both junior and senior academics. International applicants will also receive subsidized housing at Kent Vale.

Qualifications

The Department of Architecture at the National University of Singapore invites applications for up to two Tenure track (Professor/Associate Professor/Assistant Professor) position in urban planning and design. Successful candidates should be actively engaged with urban issues in Asia. They should have interests in developing interdisciplinary research to address pressing challenges to high-density urban environment, especially in Asia. They are strongly encouraged to develop collaborative research in the context of the newly established College of Design and Engineering as well as with industry partners and government agencies within and beyond Singapore.

Successful candidates should also have interests and experience in running urban design and/or planning studios in an interdisciplinary setting. We are especially interested in applicants who are able to deploy the studio as a testbed for questions related to pressing challenges to high-density tropical cities. Successful candidates are also expected to teach core modules related to urban planning and design, physical planning, environmental management, urban economics, and urban infrastructure.

The candidate should possess a Ph.D. degree in Urban Planning and Design or related fields as well as requisite experience and credentials suitable for full-time appointment in NUS. They should (i) demonstrate a proven track record in, or strong potential for, research; (ii) have the ability to teach both studio and core modules of urban planning and design at undergraduate and postgraduate levels; and (iii) for the position of professor and associate professor, have strong academic credentials, extensive experience and strong competence in academic leadership and management. Salary will commensurate with qualifications and experience.

All qualified individuals are encouraged to apply. To apply, please provide the required documents in pdf and indicate which position you are applying for by 31 March 2024. Applications after that date may be accepted if positions are still available. Expected start date of the appointment is end of 2024 or early 2025.

1. A letter of interest
2. A complete Curriculum Vitae
3. A Statement of Teaching (maximum two pages) and a sample syllabus of a survey course in urban planning and design.
4. A Statement of Research (including a short research plan for next three to five years maximum three pages) – citing up to five significant publications, creative work or other scholarly contribution and explaining their significance, and a writing sample.
5. Names of four referees with contact details (who will be contacted only if shortlisted). Please highlight any who is a member of your PhD dissertation committee.

In accordance with the Personal Data Protection Act (PDPA), please provide consent for the collection, use and disclosure of personal data, using the NUS Personal Data Consent for Job Applicants form.

Only shortlisted candidates will be notified.

Roles & Responsibilities

Job Description

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 2 Year(s) of working experience in the related field is required for this position.
• Experiences in Structural Steel will be advantageous.
• Possessed of SCWSH (BCSS) is mandatory.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.
• Good written and spoken English.

• Apply a layer of material (e.g: cement) to the floor or other surfaces.
• Check that surface of substrate using a 2-m straight edge to ensure that it is level and true to design specifications.
• Fill joints and gaps with cement or plaster to ensure complete coverage of the surface.
• Lay tiles and timber according to the standard code of practice.
• Mix bedding materials according to manufacturer’s instruction.
• Perform task in accordance to organisational safety procedures.
• Prepare surface in accordance to industrial practices and manufacturer’s recommendation to ensure adhesion of the material.
• Set out tile lines according to the approved tiling setting out drawings and design specifications.