Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

BASK was started (in June 2020) with a single objective: to offer luxurious silk products at a revolutionary price.

We make ethically sourced silk bedding products, eye masks, and fashion hair accessories.

If you would like to play a part in introducing mulberry silk products to the younger generation so that they can witness its benefits for their hair and skin too, we want to hear from you.

For this role, we are seeking a highly motivated and creative intern in the field of graphic design, social media to assist in product design and daily content creation.

Content Creation:

• Curate creative ideas and generate engaging video content for different social media platforms.
• Create daily content including photos, videos, edits, and copywriting on our Tiktok, Instagram and other social media accounts
• Utilise your video editing skills to produce high-quality content that resonates with our target audience and drives engagement.
• Plan, curate, and execute the media calendar, ensuring timely and consistent content delivery across all platforms.

Graphic Design:

• Curate, research and develop concepts and layouts for our new products, packaging and marketing materials, websites, social media postings and other media collaterals.
• Assist in day-to-day administrative tasks and support for product listings creation, e-commerce storefront layout design update etc.

Ideal candidate should have:

• A good eye for design
• Attention to details
• Strong sense of responsibility and initiative
• Able to multi-task and work independently, as well as in a team
• Comfort working with Adobe Creative Suite, particularly Photoshop, InDesign, and Illustrator
• Reside in Singapore

• Working Hours: Monday-Friday (9.00 am - 6.00 pm)
• Working Location: Bartley
• Salary: $2500-$3000 + Commission

Interested applicants can send your resume to 8739 9469 Janie and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

#SCR-jiajia-fun

Fun Jia Jia (Janie) | Reg No: R22107945
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Johnson & Johnson is currently seeking a Senior Supply Chain Manager, Process Design – DELIVER, MedTech APAC based in Singapore.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at https://www.jnj.com

Position Overview:

The Johnson & Johnson MedTech Companies have been working to improve surgery for more than a century. With relevant breadth and depth in surgical technologies, orthopedic and interventional solutions, we seek to improve and enhance medical care for people worldwide. Together, we are working to craft the future of health through differentiated products and services.

The Senior Supply Chain Manager, Process Design – Deliver is a member of the MedTech TranSCend Supply Chain ERP program organization and will report into the Process End to End Design Leader.

The primary accountability of the role is to lead within Deliver workstream and to define, harmonize, and deliver Global ERP capabilities design and deployment, while delivering to the timeline and requirements provided by the Business Process Owner (BPO) and Subject Matter Experts (SME). The Senior Manager must drive alignment between BPO, GPO, SME’s, IT, and the project team to enable the solution and process blueprint in the ERP and the ecosystem.

The Senior Supply Chain Manager will be an authority within their functional space and strive to deliver core business capabilities and products to meet critical business process needs within the Deliver area. The Senior Supply Chain Manager will establish, document, validate, and deploy these capabilities using the TranSCend program methodology and tools, while partnering with coordinated functions, data team, business adoption team, and technology team to ensure the capabilities are realized through program results.

The Senior Supply Chain Manager will be a part of the design governance forums to ensure that we harmonize our processes and capabilities, and raise for review, resolution, and approval where deviation is required.

The successful candidate must optimally collaborate with the GPO’s, BPO’s, SMEs, and all key partners to ensure successful deployment of the Global Template and meeting program timeline and objectives.

Key Responsibilities

• Responsible for the planning and executing of all process design while supporting build, test, and adoption activities within the functional area within the project team.
• Collaborate with GPO, SME, IT, and PMO on planning and prioritization of any process design and build requirements.
• Use process design methodology, including relevant templates, tools, methodology, controls, and cadence to drive comprehensive solutions within the scope of the project
• Review and approve process decisions, designs, and relevant builds/deployments to ensure compliance with the Global Template
• Drives definition, documentation, and alignment of capabilities across the key stakeholder groups
• Reviews and approves end user business adoption mitigations for process changes
• Deviations from Standard ERP or Template, requires leadership review and approvals
• Partner with Process Integration leader to ensure a well-rounded end-to-end solution
• Partner with IT team to drive capabilities that are systematically crafted, built, validated, and deployed
• Collaborate with master data team to ensure data configuration meet business capability needs
• Partner with project management office to establish coordinated project plans / schedules / results.
• Partner with business adoption team to ensure organizational change, business readiness, site readiness, and training are delivered to meet business needs.
• Exhibit strong communication and organizational change skills.
• Conduct positive relationship development, conflict resolution, and team building instincts, with the ability to build partnerships and collaborate both internally and externally.
• Exhibits outstanding business and digital competence
• Show initiative in innovative ways to challenges in a fast-paced, changing global environment.

Requirements

• An advanced Bachelor’s degree Engineering, Business or Supply Chain, MBA Specialization in Supply Chain & Operation Management or Graduate degree in Science, Business, Engineering (strongly preferred)
• Familiarity with GxP and SOX requirements and regulations.
• Certification in areas of expertise (e.g., PMP, APICS, Lean/Six Sigma /Process Excellence, etc.).
• Minimum of 3 years of experience in Deliver and minimum of 7 years of overall business experience within one of the following functions: Plan, Source, Make, Quality, Deliver, Logistics, or Analytics.
• Have at least 3 years of business process design, engineering, and optimization experience with hands-on systems design (i.e. ERP) experience.
• Familiar with building consensus and ability to negotiate trade off decisions across the organization.
• Proven understanding of MedTech Supply Chain.
• Strong and tried project management experience with customer focus (internal & external), including development and management of collaborators.
• Knowledge of deploying standardized work processes, tools, and templates.
• Experience leading to project timelines and achievements in a sophisticated business environment, and multi-ERP/system environment.
• This position is Singapore based and may require up to 25% travel.

For more than 130 years, diversity, equity & inclusion (DEI) has been a part of our cultural fabric at Johnson & Johnson and woven into how we do business every day. Rooted in Our Credo, the values of DEI fuel our pursuit to create a healthier, more equitable world. Our diverse workforce and culture of belonging accelerate innovation to solve the world’s most pressing healthcare challenges.

We know that the success of our business – and our ability to deliver meaningful solutions – depends on how well we understand and meet the diverse needs of the communities we serve. Which is why we foster a culture of inclusion and belonging where all perspectives, abilities and experiences are valued, and our people can reach their potential.

At Johnson & Johnson, we all belong.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Interior Stylist

• Working Days: 5 Day Work Week including weekends
• Working Hours: 10am - 6pm / 10am - 8pm
• Location: Orchard (ION / Paragon)
• Salary: $2,500 - $3,000 + Commission

Requirements:

• Candidate with Diploma, Bachelor’s Degree in Interior Design, Architecture or equivalent is a plus.

Jobs Scope:

• Engage with customers to understand their needs and provide expert advice on interior styling solutions.
• Achieve sales targets while maintaining high levels of customer satisfaction.
• Collaborate with team members to create visually appealing product displays and store layouts.
• Stay updated on latest interior design trends and product knowledge.
• Make appointments with customers for Interior Design Service.
• Follow up actively on sales orders, deliveries and claims to ensure a high level of after-sales service.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 3 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description:

• Assist the architect in coordinating design details between clients and consultants.
• Manage all architectural drawings and tasks, ensuring timely submission and updates of shop drawings, samples, mock-ups, and materials. Oversee work progress to minimize conflicts, disputes, and rework.
• Review project specifications, clarify tenders, and assess construction drawings for contract and procurement management.
• Ensure adherence to architectural specifications and maintain quality standards in line with regulatory requirements.
• Take responsibility for achieving project objectives within the scope, time, cost, and quality constraints.
• Prepare method statements and technical proposals to ensure smooth transitions during the project.
• Coordinate architectural tasks, prepare estimates, interpret plans, and conduct site inspections.
• Ensure consistency across architectural and consultant drawings throughout the project.
• Resolve architectural issues on-site (e.g., discrepancies in drawings, method statements, or correspondence) and implement appropriate solutions to ensure quality and productivity using BIM software or equivalent tools.
• Liaise with clients, consultants, and subcontractors for project execution when needed.
• Organize and attend joint site inspections with various contractors as necessary.
• Review and report on the progress of architectural work.
• Work closely with the civil construction team and monitor construction activities.
• Ensure the incorporation of architectural requirements in site construction.
• Assist with construction administration tasks, including attending site visits as required.
• Compile and submit architectural documentation, including as-built drawings.
• Ensure project compliance with regulations and revise designs as needed to meet client expectations.
• Adhere to safety and health standards, aiming for zero workplace accidents.
• Maintain high standards of safety and housekeeping throughout the project.
• Perform any other ad-hoc duties as assigned.

Job Requirements:

• A degree in Architecture and registered as an architect, with at least 6 years of local experience, OR
• A diploma in Architecture with at least 8 years of local experience.
• Strong proficiency in project management and architectural practices.
• Expertise in trade coordination using Revit/Bentley or similar platforms.
• Attention to detail in reviewing architectural shop drawings.
• Strong team player with excellent interpersonal skills and a proactive attitude.
• Ability to manage multiple tasks in a fast-paced, dynamic environment.
• At least 2 completed CONQUAS building projects.
• Preferably experienced in Design & Build projects.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Jordan Fung Si Jong
EA Personnel Reg No: R23112945

• Position : QUANTITY SURVEYOR (Renovation/ Interior Design Industry)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Basic up to $4000 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Preparing tender and contract documents, including bills of quantities
• Preparing and analysing costing for tenders
• Responsible for quantity take off, sourcing of subcontractors and suppliers
• Prepare and submit variation and cost claims
• Procurement of materials and project related items
• Manage project timeline and cost, carry out rates and commercial negotiations
• Managing the contracts in accordance with the terms and conditions with respect to
• financial complications
• Assist Project Director/Manager/Snr QS on contractual disputes and arbitration
• Others as when instructed by the Management.

Requirements:

• At least 2 years’ experience in a similar position in the renovation industry
• Diploma in Building / Quantity Surveying or equivalent or relevant academic background
• Ability to work independently and as part of a team

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies):

www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on LinkedIn: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

We are seeking an experienced Design Manager to lead and oversee the design and development of Mechanical & Electrical (M&E) systems for environmental and waste management projects. The ideal candidate will ensure designs meet regulatory standards, project requirements, and sustainability goals.

Key Responsibilities:

• Manage and coordinate M&E designs for environmental and waste projects.
• Collaborate with multidisciplinary teams, including engineers, consultants, and contractors.
• Ensure compliance with regulatory and sustainability standards.
• Review and approve technical drawings, plans, and specifications.
• Provide innovative solutions to optimize project designs.

Requirements:

• Degree in Mechanical, Electrical Engineering, or related field.
• Proven experience in M&E design for environmental or waste management projects.
• Design in Autodesk products, primarily in Revit, Vault, and AutoCAD.
• Create and further develop drawing bases and REVIT families.
• Strong knowledge of regulatory standards and sustainable practices.
• Excellent leadership and project management skills.

License No: 23S1595

Registration No: R23116355

Are you ready to unleash your potential?

At Deloitte, our purpose is to make an impact that matters for our clients, our people, and the communities we serve.

We believe we have a responsibility to be a force for good, and World Impact is our portfolio of initiatives focused on making a tangible impact on society’s biggest challenges and creating a better future. We strive to advise clients on how to deliver purpose-led growth and embed more equitable, inclusive as well as sustainable business practices.

Hence, we seek talented individuals driven to excel and innovate, working together to achieve our shared goals.

We are committed to creating positive work experiences that foster a culture of respect and inclusion, where diverse perspectives are celebrated, and everyone is recognised for their contributions.

Ready to unleash your potential with us? Join the winning team now!

Work you will do

Deloitte's Life Sciences & Health Care industry group strives to support clients in addressing the challenges that impact today’s industry. Our member firms' global network engages with clients to refine their business models through innovative practices, improved processes and enabling information technologies. This role sits within the Monitor Deloitte team of Deloitte Southeast Asia. As a leader of this group, you will work alongside our clients to bring a rigorous, evidence based analytical capability to help them understand the forces that are driving change, identifying opportunities and develop solutions across the whole organisation. You will have the opportunity to work collaboratively with our clients to make immediate, direct contributions to enhance our clients’ competitive position and performance in ways that are distinctive, innovative and sustainable.

The nature of the work we do includes:

· Developing strategic business models: helping clients determine the optimum business or commercial model to effectively deliver their objectives, e.g., in the context of product launch or competitive market disruption.

· Capability building: helping our clients configure effectively and develop their ability to deliver operational excellence in specific areas, e.g., commercial, medical affairs.

· Strategic options analysis and evaluation: working with clients to understand and shape strategic options ahead of key investment decisions.

· Stimulating innovation: helping clients to identify new ways of working that will stimulate innovation and growth, and lead to better decision-making.

· Market analysis: traditional evidence-led analysis to identify market development opportunities to support client strategies.

Your role as a leader

At Deloitte, we believe in the importance of empowering our people to be leaders at all levels. We expect our people to embrace and live our purpose and shared values, challenging themselves every day to identify issues that are most important to our clients, our people and the communities, and to make an impact that matters. In addition to living our purpose, Directors across our Firm are expected to:

· Lead and act as an exemplary role model for leaders at all levels, whilst continuously promoting a sense of loyalty and energizes others to act.

· Build and sustain a high performance culture by cultivating and amplifying individual and team strengths.

· Develop and sustain long-term, trust-based relationships with stakeholders, clients and team.

· Manage the sustainable development of a strong pipeline of talent for current and future success, by driving a talent experience that differentiates Deloitte.

· Lead behavioral and cultural change through a supportive, collaborative and highly inclusive environment where team members feels supported, respected and engaged.

Enough about us, let's talk about you

If you are someone with:

· Tertiary qualification in a life-sciences or health-care discipline with a tier one institutions.

· PhD in a relevant scientific field is desirable.

· Excel in addressing complex problems in an analytical manner, with a proven record for effective delivery in a project environment, and with a keen interest in life sciences and healthcare.

· Experience in a commercial or corporate strategy role in the life sciences; or experience in strategy consulting, with exposure to life sciences industry

· Experience in analytics, market access, pricing or product launch and commercial due diligence in a life sciences or healthcare environment.

· Exceptional interpersonal, team-building, and communication skills.

· Demonstrated ability to write clearly, succinctly, and in a manner that appeals to a wide audience.

· Ability to build consensus and foster change in ambiguous settings.

· Commitment to personal and professional growth.

· Sense of responsibility to self, team, and client.

· Drive, tenacity, client focused and results oriented.

· An appreciation of the consulting lifestyle and ability to travel (both locally and abroad) is a pre-requisite to fit to our short-term and long-term project assignment.

· Willingness to work outside of office base and most of all...

· Ability to be mindfully present and appreciate the humour of each moment.

Next Steps

So what are you waiting for? Join the winning team now.

Due to volume of applications, we regret that only shortlisted candidates will be notified.

Please note that Deloitte will never reach out to you directly via messaging platforms to offer you employment opportunities or request for money or your personal information. Kindly apply for roles that you are interested in via this official Deloitte website.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

The Opportunity:

• MUST HAVE EPC DESIGN EXPERIENCE in Cleanrooms/Industrial Projects
• Permanent Roles x2
• Work hours: Mon to Fri
• $5,000 - $8,000 + AWS + VB

Adecco is partnering with a Global EPC Leader to look for Senior Process Engineer (Design experience in Cleanrooms/Industrial Projects)

The Job:

• Oversee the work of Process Engineers and Process Supervisors, ensuring accuracy and quality.
• Define deliverables for system design and collaborate with clients to understand scope requirements.
• Create or review design documents such as Process Flow Diagrams, Piping and Instrumentation Drawings, System Layouts, and Equipment and Instrumentation data sheets according to the Deliverable List.
• Participate in tendering activities including preparation, attending clarification meetings, evaluating proposal submissions, and preparing Tender Recommendation Reports.
• Conduct engineering reviews of vendor documentation to ensure technical scope compliance and completeness.

The Talents:

• Diploma/Degree in Chemical/Environmental Engineering or any technical discipline
• 4 - 7 years of EPC Design Experience, in Cleanrooms/Industrial Projects (Water, Gas, Chemical Systems)

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

The Opportunity:

• MUST HAVE EPC DESIGN EXPERIENCE in Cleanroom/Industrial Projects
• Permanent Role x2
• Consultancy experience is welcome to apply
• Work hours: Mon to Fri
• $5,000 - $8,000 + AWS + VB

Adecco is partnering with a Global EPC Leader to look for Senior Electrical Engineer (Design in cleanroom/industrial projects)

The Job:

• Prepare electrical tender packages, including specifications and drawings, ensuring alignment with the Design Checklist.
• Progress all design elements in accordance with the established Design Checklist.
• Undertake tendering and estimating of electrical works for projects before they are awarded.
• Compile and review the Operation and Maintenance Dossier for projects.
• Stay updated on industry practices and engineering trends to maintain technical competence.

The Talents:

• Diploma/Degree in Electrical Engineering
• 4 - 8 years of EPC Design Experience, in cleanroom/industrial
• Consultancy experience is welcome to apply

Next Step:

• Interested applicants, please send your resume to [email protected] with your current and expected salary.
• All shortlisted candidates will be contacted.

Title: Content/Design Creator

Job Description

Develop compelling original digital content for our brands.

Develop relevant, related and trendy content for various marketing campaigns.

Brainstorm and provide strategy on delivering content to the right target audience across all platforms.

Strong storyboarding, conceptualization and ideation capabilities.

Able to independently manage photography and video productions.

Part of the marketing team working on producing content & creatives for marketing campaigns.

Have good initiative, teamwork skills and proactive suggest ways to optimize viewership.

Creative & technically inclined and able to work well under pressure and dealines.

Requirements

At least 1 year of experience with content creation / content marketing.

Diploma / Degree in related discipline.

Profiency and independence in using Photo and Video Editing Softwares like Adobe Photoshop & Illustratos, Da Vinci Resolve, imovie, Final Cut Pro and the likes.

Strong creative marketing tone.

Familiar with Prestashop & Wordpress web edits and development ability will have a strong advantage Ability to pick up and spot trends.

Good organizational skillsnd time management skills.

Examples of storyboards, photoshoped pictures and edited videos samples.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740