Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

Why Join Us?

• Attractive Newcomer Bonus
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, etc...)
• Executive Health Screening

Responsibilities & Duties:

• Plan, design, and coordinate civil engineering, infrastructural design works with contractors/project teams.
• Review / Develop design drawings and documents in accordance with project requirements.
• Coordinate and liaise with other consultants for the discipline activities to achieve the overall project design objectives in the most efficient manner.
• Manage and communicate with internal/external project teams including relevant Authorities and relevant parties about design works and project schedule.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Monitor and update design schedule regularly.
• Attend project meetings, site inspections and consultation sessions.
• Ad-hoc duties as assigned by superior(s).

Job Requirements & Qualifications:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• 2-5 years of relevant working experience. Relevant experience in construction planning and program coordination in LTA railway and road projects would be advantageous.
• Familiar with Codes of Practice, relevant regulations and submission requirements.
• Highly experienced and proficient in the use of Primavera P6 for project planning.
• Competent user of relevant design software such as Plaxis, Tekla Structure Designer, Tekla TEDDS, Autodesk-Robot Analysis.
• Independent, result-oriented and self-driven team player with good communication skills.
• Candidates with more experience will be considered for senior positions.
• The salary package is commensurate with working experience.

Job Description

1. Attend consultant and site meetings with the Project Team, coordinate with client's, consultants and sub-contractors on M&E matters to ensure the works carried out meet the desired quality/workmanship, specifications, code requirements and the projects are completed on time and within budget.
2. Manage and lead M&E project teams by outlining and assigning work, reviewing technical accuracy and technical outcomes.
3. Manage the M&E consultants and M&E SU-contractors to meet project program, design deliverables, and Authority submission and timely approval.
4. Review & verify consultants design drawings, counter propose alternative design and feasibility of construction.
5. Review and value-add to the designs/specifications/drawings submitted by consultants.
6. Ensure the M&E designs comply with relevant codes compliances and regulations.
7. Coordinate with architectural team and structural team to ensure the final design is in-line with architect’s design intents and client’s requirements.
8. Liaise with BIM Manager on the BIM presentations, clash reports, ICE meeting schedules and requirements.
9. Assist and supervise the preparation of M&E coordination and shop drawings for the project to be used on site for construction.
10. Oversee M&E works, conduct inspections on site, monitor shop drawing progress and provide support to construction team.
11. Resolve site issues related to design or changes required by Construction team, to ensure no delay affecting main program.
12. Issuance of RFI & Site-Design Amendments
13. Ensure timely completion and good quality of works
14. Any other ad-hoc duties and tasks as may be assigned

Job Requirements

1. Degree holder in M&E, Specialist Diploma in M&E Coordinator or equivalent
2. Minimum 10 years of relevant work experience as M&E manager role. With experience in PPVC D&B projects is a plus
3. Excellent communication, leadership, and interpersonal skill.
4. Strong problem-solving and decision-making abilities
5. Skill in Autocad & Revit

Leading provider of semiconductor equipment

Senior Design Engineer

Responsibilities:

• Manage mechanical design team

• Ensure mechanical design process meets schedule

• Conduct transforming, conceptualization and design review session with internal design team

• Continuous review, development, enhance and improve company products

• Provide technical support and solutions to products inquiry

Requirements:

• Degree in Mechanical, Mechatronics Engineering or equivalent

• Minimum 8 years of design experience in factory automation design

• Minimum 3 years in design supervisor experience

• Experience in semiconductor equipment handler will be an added advantage

• Analytical minded with strong organizational skills

• Proficient in using 3D software

• Able to effectively, interact with a variety of personnel at all organizational level and customers

Interested applicants, please email detailed updated resume in MICROSOFT WORD format and indicating your current salary and expected salary to:

[email protected]

David Lim

Principal Consultant/Manager

Registration No.: R1102027

[email protected]

FA Search Pte Ltd (lic no. 07C4794)

Roles & Responsibilities:

• Responsible to create concept designs for sales proposal and as well as detail design for confirmed projects.
• Ability in selecting the right components, design of fabrication items as well as working with vendors/sub-con for assigned projects.
• Responsible for planning and executing strategies for completing projects on time and also managing the projects’ budget.
• Exhibit a level of creativity and ingenuity, as well as problem solving skills, to provide reliable, cost-effective solutions to design issues and attend to customers’ enquiries.
• Working with respective project engineer and assembly team on project schedule management, budget management, as well as customer’s review/discussion.

Job Requirements:

• Minimum of 3 years relevant experience in related process manufacturing
• Degree in Mechanical Engineering
• Working knowledge of high-level communication protocols and troubleshooting skill
• Good analytical and planning skills
• Able to work under very tight project timeline
• Independent and good team player
• Willingness to travel overseas, as required

Purpose of the Role:

The Design & General Manager at ALBD Living, Singapore, will be pivotal in driving the company’s vision to become the leading boutique full-service Interior Design, Marketing, and Branding Studio. This role combines strategic leadership with hands-on management to ensure operational excellence, financial growth, and the delivery of exceptional design solutions. By fostering innovation, building strong client and supplier relationships, and cultivating a high-performing team, the Design & General Manager will position ALBD Living as a thought leader and a trusted partner in the industry.

Key Responsibilities

1. Operational Leadership:

· Oversee all aspects of the Singapore office, including design, client service, and project execution.

· Manage performance targets, KPIs, and budgets to achieve financial and strategic goals.

· Ensure operational efficiency, optimize processes, and maintain compliance with regulations.

2. Financial Management:

· Achieve EBITA targets (20%) by improving operating ratios, pricing strategies, and supplier relationships.

· Drive financial growth with a minimum benchmark of SGD $3M in revenue within 12 months.

3. Organic Revenue Growth:

· Focus on expanding the Singapore/Australia client base through new acquisitions and enhancing relationships with existing clients.

4. Leadership and Team Development:

· Recruit, train, and lead a high-performing team in a collaborative and scalable work environment.

· Conduct workshops and training sessions to develop skills and prepare the team for future growth.

5. Design Excellence:

· Champion innovative and high-quality design solutions aligned with ALBD Living’s brand vision.

· Ensure projects meet exceptional standards for creativity, functionality, timelines, and budgets.

6. Client and Supplier Relationship Management:

· Build strong relationships with clients and suppliers, ensuring high satisfaction and retention rates.

· Act as a trusted advisor to deliver exceptional service and outcomes.

7. Market Expansion & Positioning:

· Establish ALBD Living as the leading boutique full-service studio in Singapore.

· Develop strategies to maintain thought leadership through speaking engagements, publications, and industry awards.

These KPIs ensure a balance between creative excellence, client satisfaction, and the company’s commercial success. Regular tracking and evaluation of these metrics will guide the continual improvement of both creative and strategic efforts.

Requirements:

· Bachelor’s Degree in Interior Design, Architecture, Business Administration, Marketing, or a related field.

· 10+ years of experience in a leadership role within the Interior Design, Branding, or Marketing industry.

· Proven track record of achieving financial growth, including meeting revenue targets.

· Demonstrated ability to oversee business operations, including design, project execution, and team leadership.

· Experience in client relationship management and supplier negotiations.

· Strong understanding of financial metrics such as EBITA, cost optimization, and pricing strategies.

· Familiarity with the Singapore and Australia markets is advantageous.

Skills:

· Leadership and Strategic Vision: Exceptional leadership skills to inspire and manage diverse teams and drive business growth.

· Financial and Operational Management: Expertise in achieving financial objectives and optimizing operational processes.

· Creative Excellence: Strong ability to champion innovative, high-quality design solutions.

· Client and Supplier Management: Outstanding interpersonal skills to build trust and deliver exceptional client outcomes.

· Business Development: Acumen for identifying and capturing new opportunities and expanding market presence.

· Team Building: Skilled in recruiting, mentoring, and fostering a collaborative work environment.

· Design and Branding Knowledge: Solid understanding of design principles, marketing strategies, and branding trends.

· Public Speaking and Thought Leadership: Ability to represent the company through speaking engagements, publications, and awards.

· These concise requirements and skills highlight the qualifications and expertise needed for the role.

Job Responsibilities:

• Create specifications and define software architecture for embedded systems.
• Design and develop MCU based firmware for embedded system.
• Design and develop middleware, application and GUI in Windows, embedded Linux or other environments.
• Work closely with other engineers to analyze and resolve bugs.
• Analyze performance bottleneck and optimize product quality and throughput.

Job Requirements:

• Master or degree in computer science, computer engineering or electronic engineering, or equivalent
• At least 5 years direct relevant experience for the senior engineer position.
• Fresh graduates with relevant knowledge or experience are welcome.
• Experience in MCU firmware or embedded Linux development.
• Firmware development experience with STM32 family is a plus.
• Good understanding in hardware and ability to develop low level codes.
• Strong programming experience in C/C++. Rich experience on embedded software development is a plus.
• Good knowledge in software debugging and performance optimization.
• Good experience in embedded systems based on ARM Cortex-M or Cortex-A series processors.
• Familiar with ISO13485 or IEC 62304 design process, source version control and bug tracking system is an advantage.
• Independent and resourceful.

Responsibilities:

• Coordinate design and drawings with consultant
• Monitor and report on the progress of shop drawing production
• Work closely with Architectural and M&E teams, resolve issues on drawings
• Responsible in technical submissions for materials, construction methods, and C&S shop drawing

Requirements:

• Bachelor's Degree in Civil/Structural Engineering
• Minimum 2 - 3 years of working experience in construction industry
• Relevant design experience with contractor will be an advantageous
• Demonstrates independence with excellent analytical and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Software Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Software Design Engineer

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

Requirements:

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solving skills.
• Excellent team player.

(A) Essential Job Functions:

The Design Engineer (C&S) is responsible, but not limited to, the following:

• Coordination of civil/structural works for construction.
• To attend meetings with client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

• Machine design in Mechanical aspect
• Perform mechanical part detailing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Co-ordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Solidwork 3D software to do mechanical design
• Good knowledge and experience in machine automation
• Degree / Diploma in Mechanical Engineering

Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

We are currently working with a leading semiconductor test and measurement equipment manufacturing MNC in expanding their PCB Design team. Targeting to add 4 headcounts to the team by end of 1st quarter 2025.
Reporting to Engineering Manager, the PCB Design Engineer/Senior Engineer will be responsible for:
Responsibilities:

• Conduct physical layout of PCBs, including component placement, routing, trace length adjustments, and verification.
• Utilize electrical knowledge in high-speed design, RF, and power to meet project specifications.
• Design for manufacturability by collaborating with PCB suppliers and implementing industry best practices to minimize costs and enhance yield.
• Test new internal design tools and provide feedback to the development team.
• Establish design processes aimed at reducing cycle times, minimizing defects, and enhancing product performance.
• Develop design documentation and training materials.

Requirements:

• Minimally Bachelor’s Degree or Diploma in Electrical/Electronics Engineering with a minimum of 4 – 6years of relevant PCB design experience.
• Particularly in analog and mixed-signal applications, and collaboration with PCB fabrication houses to improve manufacturability.
• Experience with blind, buried, and micro vias is a plus.
• Familiarity with logical net listings, schematic usage, electrical and routing rule creation, and signal/power integrity optimization.
• Experience in RF, backplane, and electrical package design/routing, as well as a background in semiconductor testing or the ATE industry, is advantageous.
• Proficiency in Cadence Allegro/Valor and/or PAD Power PCB, as well as Microsoft Excel.
• Strong communication skills, a sense of responsibility, attention to detail, and a collaborative mindset.

Benefits:

• Strong company branding within top 10 list.
• Competitive salary and comprehensive employee benefits.
• Hybrid work arrangement.

Responsibility:

To resume to role of a DfSP to conduct Design for safety risk assessment as per MOM guide

Requirement:

Bachelor degree in C&S / Architecture / Mechanical engineering or relevant

Certificate in DfSP

Experienced in conducting DfS risk assessment

*WSHO qualification is not relevant and will not be considered.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Develop innovative design solutions and solve engineering problems.
• Deliver parts to production on time, cost and to specification
• Produce functional prototype products suitable for testing, review and demonstration
• Develop detailed specifications and design requirements
• Develop tests to replicate anticipated usage and optimise products to be robust and high performing
• Perform analysis on test failures and develop efficient solutions

About you

• A degree in Mechanical Engineering discipline or equivalent with relevant professional experience
• A creative and considered approach to problem solving, following clear design processes
• 2 + years of industry experience
• Practical and methodical design development expertise through prototyping and testing
• Knowledge and understanding of a broad range of engineering and technological disciplines
• Proven examples of developing a technically challenging design
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team
• Ability to plan, prioritise and co-ordinate your own time
• Knowledge and understanding of multiple manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620